summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-04-20net: s390: convert to hw_featuresMichał Mirosław3-107/+52
options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: infiniband/hw/nes: convert to hw_featuresMichał Mirosław3-54/+7
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20Staging: convert hv network driver to hw_featuresMichał Mirosław1-2/+1
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: batman-adv: remove rx_csum ethtool_opsMichał Mirosław1-13/+0
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: dsa: remove ethtool_ops->set_sgMichał Mirosław1-1/+0
Remove set_sg from DSA slave ethtool_ops. Features inheritance looks broken/not fully implemented anyway. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: Release all routes when processing acks ADD_IP or DEL_IPVlad Yasevich1-6/+2
When processing an ACK for ADD_IP parameter, we only release the routes on non-active transports. This can cause a wrong source address to be used. We can release the routes and cause new route lookups and source address selection so that new addresses can be used as source. Additionally, we don't need to lookup routes for all transports at the same time. We can let the transmit code path update the cached route when the transport actually sends something. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: Allow bindx_del to accept 0 portVlad Yasevich1-1/+5
We allow 0 port when adding new addresses. It only makes sence to allow 0 port when removing addresses. When removing the currently bound port will be used when the port in the address is set to 0. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: teach CACC algorithm about removed transportsVlad Yasevich1-3/+8
When we have have to remove a transport due to ASCONF, we move the data to a new active path. This can trigger CACC algorithm to not mark that data as missing when SACKs arrive. This is because the transport passed to the CACC algorithm is the one this data is sitting on, not the one it was sent on (that one may be gone). So, by sending the original transport (even if it's NULL), we may start marking data as missing. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: use memdup_user to copy data from userspaceShan Wei1-16/+6
Use common function to simply code. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: kill abandoned SCTP_CMD_TRANSMIT commandShan Wei2-7/+0
Remove SCTP_CMD_TRANSMIT command as it never be used. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: use common head of addr parameter to access member in addr-unrelated codeShan Wei2-6/+6
The 'p' member of struct sctp_paramhdr is common part for IPv4 addr parameter and IPv6 addr parameter in union sctp_addr_param. For addr-related code, use specified addr parameter. Otherwise, use common header to access type/length member. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: fix the comment of sctp_sf_violation_paramlen()Shan Wei1-2/+3
Update the comment about sctp_sf_violation_paramlen() to be more precise. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: delete unused macro definition of sctp_chunk_is_controlShan Wei1-1/+0
The macro never be used. And if needed, can use !sctp_chunk_is_data instead of. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: add code to display default value of tx rate for VFsAjit Khaparde1-0/+13
This change will allow the default value of tx rate to be displayed when ip link show is called on a PF interface. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: pass domain id to be_cmd_link_status_queryAjit Khaparde4-5/+5
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: fix be_mcc_compl_process to identify eth_get_stat commandAjit Khaparde1-1/+3
eth_get_statistics and vlan_config command have same opcode. Use opcode subsystem id to differentiate one from other. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: Add code to display nic speeds other than 1Gbps/10GbpsAjit Khaparde1-0/+9
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: allow register dump only for PFsAjit Khaparde1-3/+7
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net:bna: fix compile warning of ‘bfa_ioc_smem_pgoff’ defined but not usedShan Wei1-7/+0
Fix the below compile warning: drivers/net/bna/bfa_ioc.c:1922: warning: ‘bfa_ioc_smem_pgoff’ defined but not used Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: forcedeth: fix compile warning of not used nv_set_tso functionShan Wei1-10/+0
Fix the below compile warning: drivers/net/forcedeth.c:4266: warning: ‘nv_set_tso’ defined but not used commit 569e146 converts forcedeth driver to use hw_features. So, implement function of .set_tso is abandoned. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19Merge branch 'master' of ↵David S. Miller12-98/+101
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2011-04-19Merge branch 'master' of ↵David S. Miller44-136/+197
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-19net: qlge: convert to hw_featuresMichał Mirosław2-47/+8
Another simple conversion. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: vmxnet3: convert to hw_featuresMichał Mirosław3-86/+28
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: vxge: convert to hw_featuresMichał Mirosław3-127/+59
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: chelsio: convert to hw_featuresMichał Mirosław5-58/+14
Also remove flags that were not used or are now redundant to hw_features bits. No device had UDP_CSUM_CAPABLE set. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: s2io: convert to hw_featuresMichał Mirosław1-80/+20
This removes advertising HW_CSUM as driver does not support it. Note: driver advertises TSO6 but not IPV6_CSUM - bug maybe? Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: fix section mismatchesMichał Mirosław10-68/+72
Fix build warnings like the following: WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids And add some consts to EISA device ID tables along the way. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19r8169: TSO fixes.Francois Romieu1-72/+137
- the MSS value is actually contained in a 11 bits wide (0x7ff) field. The extra bit in the former MSSMask did encompass the TSO command bit ("LargeSend") as well (0xfff). Oops. - the Tx descriptor layout is not the same through the whole chipset family. The 8169 documentation, the 8168c documentation and Realtek's drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts: 1. 8169, 8168 up to 8168b (included) and 8101 2. {8102e, 8168c} and beyond - notwithstanding the "first descriptor" and "last descriptor" bits, the same Tx descriptor content is enforced when a packet consists of several descriptors. The chipsets are documented to require it. Credits go to David Dillow <dave@thedillows.org> for the original patch. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: myri10ge: convert to hw_featuresMichał Mirosław1-54/+12
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jon Mason <jon.mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19net: dm9000: Fix buildMark Brown1-1/+1
Commit c88fcb (net: dm9000: convert to hw_features) broke the build of the dm9000 driver since it merged functions which use different names for the board info structure used for I/O operations without updating all the references to use the same name. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18bonding, ipv4, ipv6, vlan: Handle NETDEV_BONDING_FAILOVER like ↵Ben Hutchings7-207/+4
NETDEV_NOTIFY_PEERS It is undesirable for the bonding driver to be poking into higher level protocols, and notifiers provide a way to avoid that. This does mean removing the ability to configure reptitition of gratuitous ARPs and unsolicited NAs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18vlan: Propagate NETDEV_NOTIFY_PEERS notifierBen Hutchings1-0/+11
The NETDEV_NOTIFY_PEERS notifier indicates that a device moved to a different physical link; this also applies to any VLAN devices on top of it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18ipv6: Send unsolicited neighbour advertismements when notifiedBen Hutchings1-0/+26
The NETDEV_NOTIFY_PEERS notifier is a request to send such advertisements following migration to a different physical link, e.g. virtual machine migration. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18bnx2x: cosmetics: Using ethtool_cmd_speed() APIDavid Decotigny1-12/+13
This updates bnx2x to use the ethtool_cmd_speed() family of functions (see b11f8d8c in 2.6.27-rc3 aka. "ethtool: Expand ethtool_cmd.speed to 32 bits") to get and set the link speed via ethtool. This allows to avoid manually accessing ethtool_cmd's speed_hi field. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18ip6_pol_route panic: Do not allow VLAN on loopbackKrishna Kumar1-1/+2
Several tests in the ipv6 routing code check IFF_LOOPBACK, and allowing stacking such as VLAN'ing on top of loopback results in a netdevice which reports IFF_LOOPBACK but really isn't the loopback device. Instead of spamming the ipv6 routing code with even more special tests, simply disallow VLAN over loopback. The result of this patch is: # modprobe 8021q # vconfig add lo 43 ERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18decnet: Don't leak entries when rebuilding zone.David S. Miller1-2/+3
As noticed by Ben Hutchings, when we move entries from one table to another we leak all except the first entry. Put back the "next" variable removed by commit 9bf9055eb716f85372c41b3fbc51f90bc7653740 ("decnet: Fix set-but-unused variable.") and use it properly. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18via-rhine: Assign random MAC address if necessaryJoe Perches1-5/+7
Roger Luethi has had several reports of Rhine NICs providing an invalid MAC address. If so, assign a random MAC address so the hardware can still be used. Tested as a standalone interface, as carrier for ppp, and as a bonding slave. Original-patch-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18via_rhine: Use netdev_<level> and pr_<level>Joe Perches1-122/+108
Use the more current logging styles. Add #define DEBUG to make netdev_dbg always active. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18bridge: fix accidental creation of sysfs directoryStephen Hemminger1-1/+1
Commit bb900b27a2f49b37bc38c08e656ea13048fee13b ("bridge: allow creating bridge devices with netlink") introduced a bug in net-next because of a typo in notifier. Every device would have the sysfs bridge directory (and files). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: cxgb4{,vf}: convert to hw_featuresMichał Mirosław6-121/+28
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18bnx2x: Fix port identification problemYaniv Rosner1-5/+4
This patch fixes port identification on optic devices when there's no link on the port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18drivers/net/usb/usbnet.c: Use FIELD_SIZEOF macro in usbnet_init() function.Thiago Farina1-3/+3
Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: ibm_newemac: convert to hw_featuresMichał Mirosław1-13/+4
Side effect: allow toggling of TX offloads. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: greth: convert to hw_featuresMichał Mirosław2-46/+4
Note: Driver modifies its struct net_device_ops. This will break if used for multiple devices that are not all the same (if that HW config is possible). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: niu: convert to hw_featuresMichał Mirosław1-9/+2
Side effect: allow toggling of TX offloads. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: ehea: convert to hw_featuresMichał Mirosław2-24/+3
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: benet: convert to hw_features - fixupMichał Mirosław1-13/+0
Remove be_set_flags() as it's already covered by hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Ajit Khaparde ajit.khaparde@emulex.com Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: typhoon: convert to hw_featuresMichał Mirosław1-31/+8
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: mv643xx: convert to hw_featuresMichał Mirosław1-21/+7
Side effect: don't reenable RXCSUM on every ifdown/ifup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 23:04:32 +0300