summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-08-09mac80211/mesh: make the preq queue lock consistentBaruch Siach1-3/+3
Make mesh_preq_queue_lock locking consistent with mesh_queue_preq() using spin_lock_bh(). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09libertas_usb: program OLPC EC wakeup mask for wake-on-WLANDaniel Drake1-0/+9
OLPC power management code has recently gone upstream. This piece completes the puzzle for libertas_usb, which now programs the OLPC EC for wlan wakeups when they have been requested. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: do not limit initial tx power to 20 dbmFelix Fietkau1-3/+6
When testing for tx power, bypass the default limits. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: fix calculated runtime tx power limitFelix Fietkau4-46/+1
Use the previously calculated maximum of all rates instead of just the one from the lowest rate of the selected PHY mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: remove the tx power index offsetFelix Fietkau3-20/+6
It is always 0 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: remove last references to "softc"Pavel Roskin5-9/+9
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: clean up base.h and its usePavel Roskin22-70/+62
Remove unnecessary includes from base.h. Add includes to other files as necessary. Don't include base.h unless needed. Move declarations for functions in base.c from ath5k.h to base.h. Use a better named define to protect base.h against double inclusion. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath: fix spelling of GrenadaPavel Roskin2-2/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002Pavel Roskin1-1/+4
Without CONFIG_HERMES_PRISM, only match cards that have "Version 01.01" as the third product ID. Those have Agere firmware. With CONFIG_HERMES_PRISM, match all 0x0156:0x0002 cards. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09hostap_cs: support cards with "Version 01.02" as third product IDPavel Roskin1-0/+2
Cards with numeric ID 0x0156:0x0002 and third ID "Version 01.02" can be assumed to have Intersil firmware. Cards with Agere firmware use "Version 01.01". Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3Pavel Roskin1-0/+9
This is needed to match wireless cards with Intersil firmware that have ID 0x0156:0x0002 and the third ID "Version 01.02". Such cards are currently matched by orinoco_cs, which doesn't support WPA. They should be matched by hostap_cs. The first and the second product ID vary widely, so there are few users with some particular IDs. Of those, very few can submit a patch for hostap_cs or write a useful bugreport. It's still important to support their hardware properly. With PCMCIA_DEVICE_MANF_CARD_PROD_ID3, it should be possible to cover the remaining Intersil based designs that kept the numeric ID and the "version" of the reference design. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09b43legacy: report core numberPavel Roskin1-1/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09mac80211: Don't use a buf_size=0 in ADDBA requestsHelmut Schaa1-0/+1
According to 802.11-2007, 7.3.1.14 it is compliant to use a buf_size of 0 in ADDBA requests. But some devices (AVM Fritz Stick N) arn't able to handle that correctly and will reply with an ADDBA reponse with a buf_size of 0 which in turn will disallow BA sessions for these devices. To work around this problem, initialize hw.max_tx_aggregation_subframes to the maximum AMPDU buffer size 0x40. Using 0 as default for the bufsize was introduced in commit 5dd36bc933e8be84f8369ac64505a2938f9ce036 (mac80211: allow advertising correct maximum aggregate size). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09mac80211: Stop TX BA session if buf_size is zeroHelmut Schaa1-11/+7
If we receive an ADDBA response with status code 0 and a buf_size of 0 we should stop the TX BA session as otherwise we'll end up queuing frames in ieee80211_tx_prep_agg forever instead of sending them out as non AMPDUs. This fixes a problem with AVM Fritz Stick N wireless devices where frames to this device are not transmitted anymore by mac80211. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09b43legacy: remove 64-bit DMA supportPavel Roskin2-410/+71
Devices supported by b43legacy don't support 64-bit DMA. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: support v2 of enhanced sensitivity tableWey-Yi Guy4-33/+74
Add support for v2 of enhanced sensitivity table for 2000 series products Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: change default sensitivity value for 5000 and 6000 seriesWey-Yi Guy2-10/+10
Update the default sensitivity value for both 5000 and 6000 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09mac80211: remove offchannel_tx APIJohannes Berg5-84/+0
For iwlwifi, I decided not to use this API since it just increased the complexity for little gain. Since nobody else intends to use it, let's kill it again. If anybody later needs to have it, we can always revive it then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: support new P2P implementationJohannes Berg9-215/+127
The previous P2P implementation turned out to not work well and new uCode capabilities were added to support P2P. Modify the driver to take advantage of those, and also discover P2P support automatically based on a uCode flag instead of having a Kconfig symbol for P2P. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: move context init after firmware loadingJohannes Berg1-92/+89
The availability of contexts depends on the firmware capabilities. Currently only the presence of the second context depends on it, but soon P2P support will also be different. Move the context initialisation code to the firmware-dependent setup before registering with mac80211 to make it easier to handle. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: bump firmware API for some devicesJohannes Berg3-9/+30
We're working on improvements for the firmware for some devices, and need to bump the API for those since they won't be backward compatible completely (the earlier patch reserving queue 10 for P2P). Bump the API version to 6 for those devices but don't warn users of version 5 yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: separate firmware version warningJohannes Berg2-7/+20
We sometimes need to support new firmware API for a while before we can publish them since testing them fully takes a long time. We could keep all the new code private, but that causes plenty of problems and sometimes we can give a pre-release version of firmware to people who need to test. However, when we just bump the API version, the driver will warn everybody that their firmware is outdated, when in fact it isn't. (Currently our case for this doesn't really change the API but bumping the API version is necessary because the firmware isn't fully backward compatible) In order to handle this in the future, add a new "api_ok" version; only below this will the driver warn that the uCode is too old. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: Remove ht40 support from 5.2GHz for _bgn devicesWey-Yi Guy2-4/+2
For _bgn device, remove ht40 support for 5.2GHz, it is probably ok since the "band" is not support but just feel strange. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: default smps mode for 1000 series deviceWey-Yi Guy1-1/+1
1000 series are 1x2 devices, the old default using static smps which only use single antenna for rx, set the default to dynamic smps. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: reserve queue 10 for TX during scan dwellJohannes Berg3-9/+24
New uCode images will use queue 10 for TX during scan (for P2P offchannel operation scan). We'll bump the API version of those, but before we need to reserve queue 10 and stop using it for aggregation. To simplify the code, always reserve it, we could continue using it on older uCode images but that'd be rather complicated. Also, we'll set it up to map to the right FIFO as needed later, but as we don't use the queue now that doesn't hurt. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: eliminate CHANNEL_* macros, use AR5K_MODE_* in channel->hw_valuePavel Roskin8-134/+102
When checking for the band, use channel->band. Change ath5k_hw_nic_wakeup() and ath5k_channel_ok() to take ieee80211_channel. Change ath5k_hw_radio_revision() to take ieee80211_band. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: remove most references to XRPavel Roskin5-22/+0
XR is a proprietary feature of the chipset. It's not supported and should not be supported. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: remove unused and write-only structures and fieldsPavel Roskin5-37/+1
struct ath5k_avg_val is unused. In struct ath5k_hw, lladdr, ah_radar and ah_mac_revision are write-only, rxbufsize is unused, ah_phy is write-only and referenced by unused macros. In struct ath5k_vif, lladdr is write-only. Remove AR5K_TUNE_RADAR_ALERT, which has no effect. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k: remove all references to subsysid, it's never usedPavel Roskin6-10/+6
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: fix irq assignment for new SoCs.Hauke Mehrtens1-0/+12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: add support for bcma busHauke Mehrtens9-2/+190
This patch add support for the bcma bus. Broadcom uses only Mips 74K CPUs on the new SoC and on the old ons using ssb bus there are no Mips 74K CPUs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: make it possible to build bcm47xx without ssb.Hauke Mehrtens12-8/+71
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: prepare to support different busesHauke Mehrtens9-61/+160
Prepare bcm47xx to support different System buses. Before adding support for bcma it should be possible to build bcm47xx without the need of ssb. With this patch bcm47xx does not directly contain a ssb_bus, but a union contain all the supported system buses. As a SoC just uses one system bus a union is a good choice. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: get CPU clockHauke Mehrtens5-0/+161
Add method to return the clock of the CPU. This is needed by the arch code to calculate the mips_hpt_frequency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: add serial console supportHauke Mehrtens5-0/+97
This adds support for serial console to bcma, when operating on an SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: add mips driverHauke Mehrtens7-0/+333
This adds a mips driver to bcma. This is only found on embedded devices. For now the driver just initializes the irqs used on this system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: add SOC busHauke Mehrtens9-8/+263
This patch adds support for using bcma on a Broadcom SoC as the system bus. An SoC like the bcm4716 could register this bus and use it to searches for the bcma cores and register the devices on this bus. BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC is a better name. Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: add functions to scan cores needed on SoCsHauke Mehrtens7-6/+154
The chip common and mips core have to be setup early in the boot process to get the cpu clock. bcma_bus_early_register() gets pointers to some space to store the core data and searches for the chip common and mips core and initializes chip common. After that was done and the kernel is out of early boot we just have to run bcma_bus_register() and it will search for the other cores, initialize and register them. The cores are getting the same numbers as before. Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: move initializing of struct bcma_bus to own function.Hauke Mehrtens1-6/+11
This makes it possible to use this code in some other method. Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcma: move parsing of EEPROM into own function.Hauke Mehrtens1-112/+118
Move the parsing of the EEPROM data in scan function for one core into an own function. Now we are able to use it in some other scan function as well. Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath9k: use pci_dev->subsystem_deviceSergei Shtylyov1-3/+2
The driver reads PCI subsystem ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove redundant variable scan_table_idxBing Zhao2-13/+0
mwifiex_get_bss_info() routine updates variable 'info->scan_table_idx' but it is never used. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08libertas_usb: use USB interface as parent deviceDaniel Drake1-1/+1
Currently, "udevadm info -a -p /sys/class/net/wlan0" doesn't mention the usb8xxx or libertas driver anywhere. This makes writing udev rules a bit uncomfortable. Using the USB interface as the parent device corrects the hierarchy. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08libertas: link mesh device to wiphyDaniel Drake8-43/+117
The mesh device is now exposed as an interface of the wiphy. This exposes the mesh device to the cfg80211 interface, allowing mesh channel selection to be reimplemented, and available to NetworkManager as it was before. Some header tweaking was needed in order to implement lbs_mesh_activated(). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08cfg80211: remove unused wext handler exportsJohannes Berg4-149/+66
A lot of code is dedicated to giving drivers the ability to use cfg80211's wext handlers without completely converting. However, only orinoco is currently using this, and it is only partially using it. We reduce the size of both the source and binary by removing those that nobody needs. If a driver shows up that needs it during conversion, we can add back those that are needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove wireless.h inclusion and fix resulting bugsBing Zhao7-28/+19
replace IW_MAX_AP & IW_CUSTOM_MAX with local definitions and remove usage of struct iw_statistics. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mac80211: remove linux/wireless.h inclusionJohannes Berg1-1/+0
linux/wireless.h is for wireless extensions only, so mac80211 shouldn't include it since it uses cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: add wext includeJohannes Berg1-0/+1
In trying to remove the wext includes from mac80211 and cfg80211 I found that mwifiex currently uses them. This is wrong, it shouldn't, but to not break it completely include wext there. Please remove this and fix all the resulting bugs. Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08wl1251: remove wext dependenciesJohannes Berg2-2/+2
This driver uses IW_ESSID_MAX_SIZE when it should be using IEEE80211_MAX_SSID_LEN instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08wl12xx: remove wext dependenciesJohannes Berg5-9/+9
This driver uses IW_ESSID_MAX_SIZE when it should be using IEEE80211_MAX_SSID_LEN instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 05:23:15 +0300