summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-20Linux 4.4.224v4.4.224Greg Kroah-Hartman1-1/+1
2020-05-20scsi: iscsi: Fix a potential deadlock in the timeout handlerBart Van Assche1-2/+2
commit 5480e299b5ae57956af01d4839c9fc88a465eeab upstream. Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); <Interrupt> lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Henri Rosten <henri.rosten@unikie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Makefile: disallow data races on gcc-10 as wellSergei Trofimovich1-0/+1
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mceJim Mattson1-1/+1
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a7740: Add missing extal2 to CPG nodeGeert Uytterhoeven1-1/+1
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Revert "ALSA: hda/realtek: Fix pop noise on ALC225"Kai-Heng Feng1-2/+0
commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream. This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in cdc_bind()Wei Yongjun1-1/+3
commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in gncm_bind()Wei Yongjun1-1/+3
commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: audio: Fix a missing error return value in audio_bind()Christophe JAILLET1-1/+3
commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream. If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0. Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: net2272: Fix a memory leak in an error handling path in ↵Christophe JAILLET1-0/+2
'net2272_plat_probe()' commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream. 'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error handling path, as already done in the remove function (i.e. 'net2272_plat_remove()') Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20exec: Move would_dump into flush_old_execEric W. Biederman1-2/+2
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86: Fix early boot crash on gcc-10, third tryBorislav Petkov5-1/+24
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entriesFabio Estevam1-2/+2
commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream. The I2C2 pins are already used and the following errors are seen: imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back imx-i2c: probe of 1001d000.i2c failed with error -22 Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group. Cc: <stable@vger.kernel.org> Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20USB: gadget: fix illegal array access in binding with UDCKyungtae Kim1-0/+3
commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream. FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Kyungtae Kim <kt0755@gmail.com> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: rawmidi: Initialize allocated buffersTakashi Iwai1-2/+2
commit 5a7b44a8df822e0667fc76ed7130252523993bda upstream. syzbot reported the uninitialized value exposure in certain situations using virmidi loop. It's likely a very small race at writing and reading, and the influence is almost negligible. But it's safer to paper over this just by replacing the existing kvmalloc() with kvzalloc(). Reported-by: syzbot+194dffdb8b22fc5d207a@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: rawmidi: Fix racy buffer resize under concurrent accessesTakashi Iwai2-4/+28
commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream. The rawmidi core allows user to resize the runtime buffer via ioctl, and this may lead to UAF when performed during concurrent reads or writes: the read/write functions unlock the runtime lock temporarily during copying form/to user-space, and that's the race window. This patch fixes the hole by introducing a reference counter for the runtime buffer read/write access and returns -EBUSY error when the resize is performed concurrently against read/write. Note that the ref count field is a simple integer instead of refcount_t here, since the all contexts accessing the buffer is basically protected with a spinlock, hence we need no expensive atomic ops. Also, note that this busy check is needed only against read / write functions, and not in receive/transmit callbacks; the race can happen only at the spinlock hole mentioned in the above, while the whole function is protected for receive / transmit callbacks. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: hda/realtek - Limit int mic boost for Thinkpad T530Takashi Iwai1-1/+9
commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream. Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20netlabel: cope with NULL catmapPaolo Abeni2-2/+10
[ Upstream commit eead1c2ea2509fd754c6da893a94f0e69e83ebe4 ] The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20net: ipv4: really enforce backoff for redirectsPaolo Abeni1-1/+1
[ Upstream commit 57644431a6c2faac5d754ebd35780cf43a531b1a ] In commit b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") I missed the fact that a 0 'rate_tokens' will bypass the backoff algorithm. Since rate_tokens is cleared after a redirect silence, and never incremented on redirects, if the host keeps receiving packets requiring redirect it will reply ignoring the backoff. Additionally, the 'rate_last' field will be updated with the cadence of the ingress packet requiring redirect. If that rate is high enough, that will prevent the host from generating any other kind of ICMP messages The check for a zero 'rate_tokens' value was likely a shortcut to avoid the more complex backoff algorithm after a redirect silence period. Address the issue checking for 'n_redirects' instead, which is incremented on successful redirect, and does not interfere with other ICMP replies. Fixes: b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") Reported-and-tested-by: Colin Walters <walters@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20net: fix a potential recursive NETDEV_FEAT_CHANGECong Wang1-1/+3
[ Upstream commit dd912306ff008891c82cd9f63e8181e47a9cb2fb ] syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event between bonding master and slave. I managed to find a reproducer for this: ip li set bond0 up ifenslave bond0 eth0 brctl addbr br0 ethtool -K eth0 lro off brctl addif br0 bond0 ip li set br0 up When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave, it captures this and calls bond_compute_features() to fixup its master's and other slaves' features. However, when syncing with its lower devices by netdev_sync_lower_features() this event is triggered again on slaves when the LRO feature fails to change, so it goes back and forth recursively until the kernel stack is exhausted. Commit 17b85d29e82c intentionally lets __netdev_update_features() return -1 for such a failure case, so we have to just rely on the existing check inside netdev_sync_lower_features() and skip NETDEV_FEAT_CHANGE event only for this specific failure case. Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com Cc: Jarod Wilson <jarod@redhat.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jann Horn <jannh@google.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: avoid shadowing standard library 'free()' in cryptoLinus Torvalds2-4/+4
commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream. gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/paravirt: Remove the unused irq_enable_sysexit pv opBoris Ostrovsky10-55/+2
commit 88c15ec90ff16880efab92b519436ee17b198477 upstream. As result of commit "x86/xen: Avoid fast syscall path for Xen PV guests", the irq_enable_sysexit pv op is not called by Xen PV guests anymore and since they were the only ones who used it we can safely remove it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-3-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blk-mq: Allow blocking queue tag iter callbacksKeith Busch1-5/+2
commit 530ca2c9bd6949c72c9b5cfc330cb3dbccaa3f5b upstream. A recent commit runs tag iterator callbacks under the rcu read lock, but existing callbacks do not satisfy the non-blocking requirement. The commit intended to prevent an iterator from accessing a queue that's being modified. This patch fixes the original issue by taking a queue reference instead of reading it, which allows callbacks to make blocking calls. Fixes: f5bbbbe4d6357 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter") Acked-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iterJianchao Wang1-1/+9
commit f5bbbbe4d63577026f908a809f22f5fd5a90ea1f upstream. For blk-mq, part_in_flight/rw will invoke blk_mq_in_flight/rw to account the inflight requests. It will access the queue_hw_ctx and nr_hw_queues w/o any protection. When updating nr_hw_queues and blk_mq_in_flight/rw occur concurrently, panic comes up. Before update nr_hw_queues, the q will be frozen. So we could use q_usage_counter to avoid the race. percpu_ref_is_zero is used here so that we will not miss any in-flight request. The access to nr_hw_queues and queue_hw_ctx in blk_mq_queue_tag_busy_iter are under rcu critical section, __blk_mq_update_nr_hw_queues could use synchronize_rcu to ensure the zeroed q_usage_counter to be globally visible. -------------- NOTE: Back-ported to 4.4.y. The upstream commit was intended to prevent concurrent manipulation of nr_hw_queues and iteration over queues. The former doesn't happen in this in 4.4.7 (as __blk_mq_update_nr_hw_queues doesn't exist). The extra locking is also buggy in this commit but fixed in a follow-up. It may protect against other concurrent accesses such as queue removal by synchronising RCU locking around q_usage_counter. -------------- Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blk-mq: Allow timeouts to run while queue is freezingGabriel Krisman Bertazi1-1/+14
commit 71f79fb3179e69b0c1448a2101a866d871c66e7f upstream. In case a submitted request gets stuck for some reason, the block layer can prevent the request starvation by starting the scheduled timeout work. If this stuck request occurs at the same time another thread has started a queue freeze, the blk_mq_timeout_work will not be able to acquire the queue reference and will return silently, thus not issuing the timeout. But since the request is already holding a q_usage_counter reference and is unable to complete, it will never release its reference, preventing the queue from completing the freeze started by first thread. This puts the request_queue in a hung state, forever waiting for the freeze completion. This was observed while running IO to a NVMe device at the same time we toggled the CPU hotplug code. Eventually, once a request got stuck requiring a timeout during a queue freeze, we saw the CPU Hotplug notification code get stuck inside blk_mq_freeze_queue_wait, as shown in the trace below. [c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable) [c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350 [c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990 [c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0 [c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110 [c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0 [c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100 [c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0 [c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400 [c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0 [c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50 [c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140 [c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0 [c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0 [c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0 [c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200 [c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0 [c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230 [c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110 [c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4 The fix is to allow the timeout work to execute in the window between dropping the initial refcount reference and the release of the last reference, which actually marks the freeze completion. This can be achieved with percpu_refcount_tryget, which does not require the counter to be alive. This way the timeout work can do it's job and terminate a stuck request even during a freeze, returning its reference and avoiding the deadlock. Allowing the timeout to run is just a part of the fix, since for some devices, we might get stuck again inside the device driver's timeout handler, should it attempt to allocate a new request in that path - which is a quite common action for Abort commands, which need to be sent after a timeout. In NVMe, for instance, we call blk_mq_alloc_request from inside the timeout handler, which will fail during a freeze, since it also tries to acquire a queue reference. I considered a similar change to blk_mq_alloc_request as a generic solution for further device driver hangs, but we can't do that, since it would allow new requests to disturb the freeze process. I thought about creating a new function in the block layer to support unfreezable requests for these occasions, but after working on it for a while, I feel like this should be handled in a per-driver basis. I'm now experimenting with changes to the NVMe timeout path, but I'm open to suggestions of ways to make this generic. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: linux-nvme@lists.infradead.org Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20block: defer timeouts to a workqueueChristoph Hellwig2-0/+7
commit 287922eb0b186e2a5bf54fdd04b734c25c90035c upstream. Timer context is not very useful for drivers to perform any meaningful abort action from. So instead of calling the driver from this useless context defer it to a workqueue as soon as possible. Note that while a delayed_work item would seem the right thing here I didn't dare to use it due to the magic in blk_add_timer that pokes deep into timer internals. But maybe this encourages Tejun to add a sensible API for that to the workqueue API and we'll all be fine in the end :) Contains a major update from Keith Bush: "This patch removes synchronizing the timeout work so that the timer can start a freeze on its own queue. The timer enters the queue, so timer context can only start a freeze, but not wait for frozen." ------------- NOTE: Back-ported to 4.4.y. The only parts of the upstream commit that have been kept are various locking changes, none of which were mentioned in the original commit message which therefore describes this change not at all. Timeout callbacks continue to be run via a timer. Both blk_mq_rq_timer and blk_rq_timed_out_timer will return without without doing any work if they cannot acquire the queue (without waiting). ------------- Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: disable 'restrict' warning for nowLinus Torvalds1-0/+3
commit adc71920969870dfa54e8f40dac8616284832d02 upstream. gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: disable 'stringop-overflow' warning for nowLinus Torvalds1-0/+1
commit 5a76021c2eff7fcf2f0918a08fd8a37ce7922921 upstream. This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: disable 'array-bounds' warning for nowLinus Torvalds1-0/+1
commit 44720996e2d79e47d508b0abe99b931a726a3197 upstream. This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: disable 'zero-length-bounds' warning for nowLinus Torvalds1-0/+3
commit 5c45de21a2223fe46cf9488c99a7fbcf01527670 upstream. This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Stop the ad-hoc games with -Wno-maybe-initializedLinus Torvalds3-22/+3
commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream. We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20kbuild: compute false-positive -Wmaybe-uninitialized cases in KconfigMasahiro Yamada3-1/+22
commit b303c6df80c9f8f13785aa83a0471fca7e38b24d upstream. Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched various false positives: - commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os") turned off this option for -Os. - commit 815eb71e7149 ("Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for CONFIG_PROFILE_ALL_BRANCHES - commit a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") turned off this option for GCC < 4.9 Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903 I think this looks better by shifting the logic from Makefile to Kconfig. Link: https://github.com/ClangBuiltLinux/linux/issues/350 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10 warnings: fix low-hanging fruitLinus Torvalds2-2/+2
commit 9d82973e032e246ff5663c9805fbb5407ae932e3 upstream. Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20pnp: Use list_for_each_entry() instead of open codingJason Gunthorpe1-20/+9
commit 01b2bafe57b19d9119413f138765ef57990921ce upstream. Aside from good practice, this avoids a warning from gcc 10: ./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds] 997 | ((type *)(__mptr - offsetof(type, member))); }) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’ 493 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’ 275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list) | ^~~~~~~~~~ ./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’ 281 | (dev) != global_to_pnp_dev(&pnp_global); \ | ^~~~~~~~~~~~~~~~~ arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’ 189 | pnp_for_each_dev(dev) { Because the common code doesn't cast the starting list_head to the containing struct. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> [ rjw: Whitespace adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20IB/mlx4: Test return value of calls to ib_get_cached_pkeyJack Morgenstein1-3/+11
[ Upstream commit 6693ca95bd4330a0ad7326967e1f9bcedd6b0800 ] In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey() without checking its return value. If ib_get_cached_pkey() returns an error code, these functions should return failure. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr") Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20netfilter: conntrack: avoid gcc-10 zero-length-bounds warningArnd Bergmann2-3/+3
[ Upstream commit 2c407aca64977ede9b9f35158e919773cae2082f ] gcc-10 warns around a suspicious access to an empty struct member: net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc': net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds] 1522 | memset(&ct->__nfct_init_offset[0], 0, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from net/netfilter/nf_conntrack_core.c:37: include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset' 90 | u8 __nfct_init_offset[0]; | ^~~~~~~~~~~~~~~~~~ The code is correct but a bit unusual. Rework it slightly in a way that does not trigger the warning, using an empty struct instead of an empty array. There are probably more elegant ways to do this, but this is the smallest change. Fixes: c41884ce0562 ("netfilter: conntrack: avoid zeroing timer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20net/mlx5: Fix driver load error flow when firmware is stuckGal Pressman1-1/+1
[ Upstream commit 8ce59b16b4b6eacedaec1f7b652b4781cdbfe15f ] When wait for firmware init fails, previous code would mistakenly return success and cause inconsistency in the driver state. Fixes: 6c780a0267b8 ("net/mlx5: Wait for FW readiness before initializing command interface") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20i40e: avoid NVM acquire deadlock during NVM updateAnjali Singhai Jain2-40/+60
[ Upstream commit 09f79fd49d94cda5837e9bfd0cb222232b3b6d9f ] X722 devices use the AdminQ to access the NVM, and this requires taking the AdminQ lock. Because of this, we lock the AdminQ during i40e_read_nvm(), which is also called in places where the lock is already held, such as the firmware update path which wants to lock once and then unlock when finished after performing several tasks. Although this should have only affected X722 devices, commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) added locking for all NVM reads, regardless of device family. This resulted in us accidentally causing NVM acquire timeouts on all devices, causing failed firmware updates which left the eeprom in a corrupt state. Create unsafe non-locked variants of i40e_read_nvm_word and i40e_read_nvm_buffer, __i40e_read_nvm_word and __i40e_read_nvm_buffer respectively. These variants will not take the NVM lock and are expected to only be called in places where the NVM lock is already held if needed. Since the only caller of i40e_read_nvm_buffer() was in such a path, remove it entirely in favor of the unsafe version. If necessary we can always add it back in the future. Additionally, we now need to hold the NVM lock in i40e_validate_checksum because the call to i40e_calc_nvm_checksum now assumes that the NVM lock is held. We can further move the call to read I40E_SR_SW_CHECKSUM_WORD up a bit so that we do not need to acquire the NVM lock twice. This should resolve firmware updates and also fix potential raise that could have caused the driver to report an invalid NVM checksum upon driver load. Reported-by: Stefan Assmann <sassmann@kpanic.de> Fixes: 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20scsi: qla2xxx: Avoid double completion of abort commandBen Hutchings1-2/+2
[ Upstream commit 3a9910d7b686546dcc9986e790af17e148f1c888 ] qla2x00_tmf_sp_done() now deletes the timer that will run qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already expired. Check the return value from del_timer() to avoid calling complete() a second time. Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...") Fixes: 1514839b3664 ("scsi: qla2xxx: Fix NULL pointer crash due to active ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20mm/memory_hotplug.c: fix overflow in test_pages_in_a_zone()zhong jiang1-2/+2
[ Upstream commit d6d8c8a48291b929b2e039f220f0b62958cccfea ] When mainline introduced commit a96dfddbcc04 ("base/memory, hotplug: fix a kernel oops in show_valid_zones()"), it obtained the valid start and end pfn from the given pfn range. The valid start pfn can fix the actual issue, but it introduced another issue. The valid end pfn will may exceed the given end_pfn. Although the incorrect overflow will not result in actual problem at present, but I think it need to be fixed. [toshi.kani@hpe.com: remove assumption that end_pfn is aligned by MAX_ORDER_NR_PAGES] Fixes: a96dfddbcc04 ("base/memory, hotplug: fix a kernel oops in show_valid_zones()") Link: http://lkml.kernel.org/r/1486467299-22648-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20gre: do not keep the GRE header around in collect medata modeJiri Benc1-1/+6
[ Upstream commit e271c7b4420ddbb9fae82a2b31a5ab3edafcf4fe ] For ipgre interface in collect metadata mode, it doesn't make sense for the interface to be of ARPHRD_IPGRE type. The outer header of received packets is not needed, as all the information from it is present in metadata_dst. We already don't set ipgre_header_ops for collect metadata interfaces, which is the only consumer of mac_header pointing to the outer IP header. Just set the interface type to ARPHRD_NONE in collect metadata mode for ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset mac_header. Fixes: a64b04d86d14 ("gre: do not assign header_ops in collect metadata mode") Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20net: openvswitch: fix csum updates for MPLS actionsJohn Hurley1-4/+2
[ Upstream commit 0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ] Skbs may have their checksum value populated by HW. If this is a checksum calculated over the entire packet then the CHECKSUM_COMPLETE field is marked. Changes to the data pointer on the skb throughout the network stack still try to maintain this complete csum value if it is required through functions such as skb_postpush_rcsum. The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when changes are made to packet data without a push or a pull. This occurs when the ethertype of the MAC header is changed or when MPLS lse fields are modified. The modification is carried out using the csum_partial function to get the csum of a buffer and add it into the larger checksum. The buffer is an inversion of the data to be removed followed by the new data. Because the csum is calculated over 16 bits and these values align with 16 bits, the effect is the removal of the old value from the CHECKSUM_COMPLETE and addition of the new value. However, the csum fed into the function and the outcome of the calculation are also inverted. This would only make sense if it was the new value rather than the old that was inverted in the input buffer. Fix the issue by removing the bit inverts in the csum_partial calculation. The bug was verified and the fix tested by comparing the folded value of the updated CHECKSUM_COMPLETE value with the folded value of a full software checksum calculation (reset skb->csum to 0 and run skb_checksum_complete(skb)). Prior to the fix the outcomes differed but after they produce the same result. Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel") Fixes: bc7cc5999fd3 ("openvswitch: update checksum in {push,pop}_mpls") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20ipc/util.c: sysvipc_find_ipc() incorrectly updates position indexVasily Averin1-6/+6
[ Upstream commit 5e698222c70257d13ae0816720dde57c56f81e15 ] Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by: Andreas Schwab <schwab@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()Vasily Averin1-1/+2
[ Upstream commit 5b5703dbafae74adfbe298a56a81694172caf5e6 ] v2: removed TODO reminder Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20dmaengine: mmp_tdma: Reset channel error on releaseLubomir Rintel1-0/+2
[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ] When a channel configuration fails, the status of the channel is set to DEV_ERROR so that an attempt to submit it fails. However, this status sticks until the heat end of the universe, making it impossible to recover from the error. Let's reset it when the channel is released so that further use of the channel with correct configuration is not impacted. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20dmaengine: pch_dma.c: Avoid data race between probe and irq handlerMadhuparna Bhowmik1-1/+1
[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ] pd->dma.dev is read in irq handler pd_irq(). However, it is set to pdev->dev after request_irq(). Therefore, set pd->dma.dev to pdev->dev before request_irq() to avoid data race between pch_dma_probe() and pd_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20cifs: Fix a race condition with cifs_echo_requestRonnie Sahlberg1-4/+4
[ Upstream commit f2caf901c1b7ce65f9e6aef4217e3241039db768 ] There is a race condition with how we send (or supress and don't send) smb echos that will cause the client to incorrectly think the server is unresponsive and thus needs to be reconnected. Summary of the race condition: 1) Daisy chaining scheduling creates a gap. 2) If traffic comes unfortunate shortly after the last echo, the planned echo is suppressed. 3) Due to the gap, the next echo transmission is delayed until after the timeout, which is set hard to twice the echo interval. This is fixed by changing the timeouts from 2 to three times the echo interval. Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20cifs: Check for timeout on Negotiate stageSamuel Cabrero3-1/+26
[ Upstream commit 76e752701a8af4404bbd9c45723f7cbd6e4a251e ] Some servers seem to accept connections while booting but never send the SMBNegotiate response neither close the connection, causing all processes accessing the share hang on uninterruptible sleep state. This happens when the cifs_demultiplex_thread detects the server is unresponsive so releases the socket and start trying to reconnect. At some point, the faulty server will accept the socket and the TCP status will be set to NeedNegotiate. The first issued command accessing the share will start the negotiation (pid 5828 below), but the response will never arrive so other commands will be blocked waiting on the mutex (pid 55352). This patch checks for unresponsive servers also on the negotiate stage releasing the socket and reconnecting if the response is not received and checking again the tcp state when the mutex is acquired. PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls" #0 [ffff880fd9add9f0] schedule at ffffffff81467eb9 #1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0 #2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a #3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs] #4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs] #5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs] .... Which is waiting a mutex owned by: PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx" #0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9 #1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs] #2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs] #3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs] #4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs] #5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs] #6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs] #7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs] .... Signed-off-by: Samuel Cabrero <scabrero@suse.de> Reviewed-by: Aurélien Aptel <aaptel@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu2-3/+13
commit 19b61392c5a852b4e8a0bf35aecb969983c5932d upstream. dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20scsi: sg: add sg_remove_request in sg_writeWu Bo1-1/+3
commit 83c6f2390040f188cc25b270b4befeb5628c1aee upstream. If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [groeck: Backport to v5.4.y and older kernels] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 13:05:36 +0300