| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
commit 2278446e2b7cd33ad894b32e7eb63afc7db6c86e upstream.
Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.
This can be triggered with "udisksctl power-off --block-device <disk>"
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.
USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.
hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).
The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.
The regression was caused by, and whole thing revealed by,
Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.
Fix this by checking xhci->devs[i]->udev exists before setting link state.
The original patch went to stable so this fix needs to be applied there as
well.
Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream.
When a UHID_CREATE command is written to the uhid char device, a
copy_from_user() is done from a user pointer embedded in the command.
When the address limit is KERNEL_DS, e.g. as is the case during
sys_sendfile(), this can read from kernel memory. Alternatively,
information can be leaked from a setuid binary that is tricked to write
to the file descriptor. Therefore, forbid UHID_CREATE in these cases.
No other commands in uhid_char_write() are affected by this bug and
UHID_CREATE is marked as "obsolete", so apply the restriction to
UHID_CREATE only rather than to uhid_char_write() entirely.
Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to
Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess
helpers fault on kernel addresses"), allowing this bug to be found.
Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com
Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db68ce10c4f0a27c1ff9fa0e789e5c41f8c4ea63 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[only take the include/linux/uaccess.h portion - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream.
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fee05f455ceb5c670cbe48e2f9454ebc4a388554 upstream.
req.gid can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn:
potential spectre issue 'gru_base' [w]
Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which
uses it to index gru_base.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6501f49199097b99e4e263644d88c90d1ec1060 upstream.
Add another Apple Cinema Display to the list of supported displays
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream.
After building the kernel with Clang, the following section mismatch
warning appears:
WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from
the function ssc_probe() to the function
.init.text:atmel_ssc_get_driver_data()
The function ssc_probe() references
the function __init atmel_ssc_get_driver_data().
This is often because ssc_probe lacks a __init
annotation or the annotation of atmel_ssc_get_driver_data is wrong.
Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a77112577667cbda7c6292c52d909636aef31fd9 upstream.
Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.
Dmesg output:
usb 1-6: string descriptor 0 read error: -110
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: can't set config #1, error -110
Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream.
Raydium USB touchscreen fails to set config if LPM is enabled:
[ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.030660] usb 1-8: Product: Raydium Touch System
[ 2.030661] usb 1-8: Manufacturer: Raydium Corporation
[ 7.132209] usb 1-8: can't set config #1, error -110
Same behavior can be observed on 2386:3114.
Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.
The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349
Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 432798195bbce1f8cd33d1c0284d0538835e25fb upstream.
I was trying to solve a double free but I introduced a more serious
NULL dereference bug. The problem is that if there is an IRQ which
triggers immediately, then we need "info->uio_dev" but it's not set yet.
This patch puts the original initialization back to how it was and just
sets info->uio_dev to NULL on the error path so it should solve both
the Oops and the double free.
Fixes: f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails")
Reported-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92539d3eda2c090b382699bbb896d4b54e9bdece upstream.
Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the first event queued by the add callback (and possibly other
events arriving soon afterwards) to be lost.
Fix this by adding the subscription to the list before calling the "add"
callback, and clean up afterwards if that fails.
Fixes: ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org (for 4.14 and up)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
[Sakari Ailus: Backported to v4.9 stable]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5824d86b50b8c5f9ecd725f2d74381a23ab1c63b which is
commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream.
You Ling writes that this config option isn't even in 4.4.y yet, so it
causes a regression. Revert the patch because of this.
Reported-by: youling 257 <youling257@gmail.com>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 46431d9c28f6859f8e568ac7db92137f1da31100.
This commit fixes a bug in upstream commit a136f59c0a1f ("vb2: Move
buffer cache synchronisation to prepare from queue") which isn't
present in 4.4.
So as a result you get an UNBALANCED message in the kernel log if
this patch is applied:
vb2: counters for queue ffffffc0f3687478, buffer 3: UNBALANCED!
vb2: buf_init: 1 buf_cleanup: 1 buf_prepare: 805 buf_finish: 805
vb2: buf_queue: 806 buf_done: 806
vb2: alloc: 0 put: 0 prepare: 806 finish: 805 mmap: 0
vb2: get_userptr: 0 put_userptr: 0
vb2: attach_dmabuf: 1 detach_dmabuf: 1 map_dmabuf: 805 unmap_dmabuf: 805
vb2: get_dmabuf: 0 num_users: 1609 vaddr: 0 cookie: 805
Reverting this patch solves this regression.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fcd5e74288f7d36991b1f0fb96b8c57079645e38 upstream.
When running generic/475, we may get the following warning in dmesg:
[ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8
[ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286
[ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007
[ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74
[ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000
[ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88
[ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100
[ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000
[ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0
[ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6902.137836] Call Trace:
[ 6902.138939] close_ctree+0x171/0x330 [btrfs]
[ 6902.140181] ? kthread_stop+0x146/0x1f0
[ 6902.141277] generic_shutdown_super+0x6c/0x100
[ 6902.142517] kill_anon_super+0x14/0x30
[ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs]
[ 6902.144790] deactivate_locked_super+0x2f/0x70
[ 6902.146014] cleanup_mnt+0x3b/0x70
[ 6902.147020] task_work_run+0x9e/0xd0
[ 6902.148036] do_syscall_64+0x470/0x600
[ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 6902.151640] RIP: 0033:0x7f45077a6a7b
[ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b
[ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490
[ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0
[ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490
[ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8
[ 6902.167553] irq event stamp: 0
[ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null)
[ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 6902.176407] ---[ end trace 463138c2986b275c ]---
[ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full
[ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536
In the above line there's "pinned=18446744073708158976" which is an
unsigned u64 value of -1392640, an obvious underflow.
When transaction_kthread is running cleanup_transaction(), another
fsstress is running btrfs_commit_transaction(). The
btrfs_finish_extent_commit() may get the same range as
btrfs_destroy_pinned_extent() got, which causes the pinned underflow.
Fixes: d4b450cd4b33 ("Btrfs: fix race between transaction commit and empty block group removal")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 10283ea525d30f2e99828978fd04d8427876a7ad upstream.
gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects
attached to the resource group glocks. That function should release the
buffers attached to the gfs2_bitmap objects (bi_bh), but the call to
gfs2_rgrp_brelse for doing that is missing.
When gfs2_releasepage later runs across these buffers which are still
referenced, it refuses to free them. This causes the pages the buffers
are attached to to remain referenced as well. With enough mount/unmount
cycles, the system will eventually run out of memory.
Fix this by adding the missing call to gfs2_rgrp_brelse in
gfs2_clear_rgrpd.
(Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.)
Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation")
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 025911a5f4e36955498ed50806ad1b02f0f76288 ]
There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fef912bf860e upstream.
commit 98af4d4df889 upstream.
I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.
v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].
This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].
[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Tested-by: Howard Chen <howardsoc@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 313a06e636808387822af24c507cba92703568b1 ]
The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.
Once this is correctly enabled, the neon recovery objects
need to be added to the build.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ]
If gcc decides not to inline make_sensor_label():
WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label()
The function .create_device_attrs() references
the function __init .make_sensor_label().
This is often because .create_device_attrs lacks a __init
annotation or the annotation of .make_sensor_label is wrong.
As .probe() can be called after freeing of __init memory, all __init
annotiations in the driver are bogus, and should be removed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ]
When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.
test commands:
%iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"
splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755] dump_stack+0xc9/0x16b
[95765.449755] ? show_regs_print_info+0x5/0x5
[95765.449755] sysfs_warn_dup+0x74/0x90
[95765.449755] sysfs_add_file_mode_ns+0x352/0x500
[95765.449755] sysfs_create_file_ns+0x179/0x270
[95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755] ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755] ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755] ? memcpy+0x34/0x50
[95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]
Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 ]
The function is called when rcu_read_lock() is held and not
when rcu_read_lock_bh() is held.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a541f0ebcc08ed8bc0cc492eec9a86cb280a9f24 ]
Fixes:
ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1275: modules] Error 2
+ exit 1
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ]
Allow /0 as advertised for hash:net,port,net sets.
For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."
Make that statement true.
Before:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
After:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
# ipset test cidrzero 192.168.205.129,12345,172.16.205.129
192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
# ipset test cidrzero6 fe80::1,12345,ff00::1
fe80::1,tcp:12345,ff00::1 is in set cidrzero6.
See also:
https://bugzilla.kernel.org/show_bug.cgi?id=200897
https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c
Signed-off-by: Eric Westbrook <linux@westbrook.io>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ]
According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5bb425871186303e6936fa2581521bdd1964a58 ]
Clang warns that if the default case is taken, ret will be
uninitialized.
./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
default:
^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
return ret;
^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
unsigned long ret, loop;
^
= 0
This warning appears several times while building the erofs filesystem.
While it's not strictly wrong, the BUILD_BUG will prevent this from
becoming a true problem. Initialize ret to 0 in the default case right
before the BUILD_BUG to silence all of these warnings.
Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ]
To fix:
acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting!
As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.
Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b33228029d842269e17bba591609e83ed422005d ]
Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.
Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 515f1867addaba49c1c6ac73abfaffbc192c1db4 ]
There are some cases can cause memory leak when parsing
option 'osdname'.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]
Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]
longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]
Creating, renaming or deleting a file may cause catalog corruption and
data loss. This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:
truncate -s 50M fs.iso
mkfs.hfsplus fs.iso
mount fs.iso /mnt
i=100
while [ $i -le 150 ]; do
touch /mnt/$i &>/dev/null
((++i))
done
i=100
while [ $i -le 150 ]; do
mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
((++i))
done
umount /mnt
fsck.hfsplus -n fs.iso
The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node. The height of the btree is not increased, which leaves the new
node orphaned and its records lost.
Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]
This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node. The height of the btree is not increased, which leaves
the new node orphaned and its records lost. It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.
For reasons I ignore, the hfs module does have support for a number of
hfsplus features. A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.
Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b10298d56c9623f9b173f19959732d3184b35f4f ]
fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly. Plumb them through.
Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg. The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.
Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.
Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9e8730b178a2472fca3123e909d6e69cc8127778 upstream.
With the following commit:
8f91869766c0 ("x86/build: Fix stack alignment for CLang")
cc-option is only used to determine the name of the stack alignment option
supported by the compiler, but not to verify that the actual parameter
<option>=N is valid in combination with the other CFLAGS.
This causes problems (as reported by the kbuild robot) with older GCC versions
which only support stack alignment on a boundary of 16 bytes or higher.
Also use (__)cc_option to add the stack alignment option to CFLAGS to
make sure only valid options are added.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernhard.Rosenkranzer@linaro.org
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Davidson <md@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hines <srhines@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Fixes: 8f91869766c0 ("x86/build: Fix stack alignment for CLang")
Link: http://lkml.kernel.org/r/20170817182047.176752-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8f91869766c00622b2eaa8ee567db4f333b78c1a upstream.
Commit:
d77698df39a5 ("x86/build: Specify stack alignment for clang")
intended to use the same stack alignment for clang as with gcc.
The two compilers use different options to configure the stack alignment
(gcc: -mpreferred-stack-boundary=n, clang: -mstack-alignment=n).
The above commit assumes that the clang option uses the same parameter
type as gcc, i.e. that the alignment is specified as 2^n. However clang
interprets the value of this option literally to use an alignment of n,
in consequence the stack remains misaligned.
Change the values used with -mstack-alignment to be the actual alignment
instead of a power of two.
cc-option isn't used here with the typical pattern of KBUILD_CFLAGS +=
$(call cc-option ...). The reason is that older gcc versions don't
support the -mpreferred-stack-boundary option, since cc-option doesn't
verify whether the alternative option is valid it would incorrectly
select the clang option -mstack-alignment..
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernhard.Rosenkranzer@linaro.org
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Davidson <md@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hines <srhines@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Link: http://lkml.kernel.org/r/20170817004740.170588-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18d5e6c34a8eda438d5ad8b3b15f42dab01bf05d upstream.
undef memcpy() and friends in boot/string.c so that the functions
defined here will have the correct names, otherwise we end up
up trying to redefine __builtin_memcpy() etc.
Surprisingly, GCC allows this (and, helpfully, discards the
__builtin_ prefix from the function name when compiling it),
but clang does not.
Adding these #undef's appears to preserve what I assume was
the original intent of the code.
Signed-off-by: Michael Davidson <md@google.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernhard.Rosenkranzer@linaro.org
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170724235155.79255-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d77698df39a512911586834d303275ea5fda74d0 upstream.
For gcc stack alignment is configured with -mpreferred-stack-boundary=N,
clang has the option -mstack-alignment=N for that purpose. Use the same
alignment as with gcc.
If the alignment is not specified clang assumes an alignment of
16 bytes, as required by the standard ABI. However as mentioned in
d9b0cde91c60 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if
supported") the standard kernel entry on x86-64 leaves the stack
on an 8-byte boundary, as a consequence clang will keep the stack
misaligned.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 032a2c4f65a2f81c93e161a11197ba19bc14a909 upstream.
cc-option is used to enable compiler options for the boot code if they
are available. The macro uses KBUILD_CFLAGS and KBUILD_CPPFLAGS for the
check, however these flags aren't used to build the boot code, in
consequence cc-option can yield wrong results. For example
-mpreferred-stack-boundary=2 is never set with a 64-bit compiler,
since the setting is only valid for 16 and 32-bit binaries. This
is also the case for 32-bit kernel builds, because the option -m32 is
added to KBUILD_CFLAGS after the assignment of REALMODE_CFLAGS.
Use __cc-option instead of cc-option for the boot mode options.
The macro receives the compiler options as parameter instead of using
KBUILD_C*FLAGS, for the boot code we pass REALMODE_CFLAGS.
Also use separate statements for the __cc-option checks instead
of performing them in the initial assignment of REALMODE_CFLAGS since
the variable is an input of the macro.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f3f1fd299768782465cb32cdf0dd4528d11f26b upstream.
cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines
whether an option is supported or not. This is fine for options used to
build the kernel itself, however some components like the x86 boot code
use a different set of flags.
Add the new macro __cc-option which is a more generic version of
cc-option with additional parameters. One parameter is the compiler
with which the check should be performed, the other the compiler options
to be used instead KBUILD_C*FLAGS.
Refactor cc-option and hostcc-option to use __cc-option and move
hostcc-option to scripts/Kbuild.include.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Fix conflicts due to lack of CC_OPTION_CFLAGS and hostcc-option
wasn't added until v4.8 so no point including it in this tree]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
incompatibility
commit 121843eb02a6e2fa30aefab64bfe183c97230c75 upstream.
The constraint "rm" allows the compiler to put mix_const into memory.
When the input operand is a memory location then MUL needs an operand
size suffix, since Clang can't infer the multiplication width from the
operand.
Add and use the _ASM_MUL macro which determines the operand size and
resolves to the NUL instruction with the corresponding suffix.
This fixes the following error when building with clang:
CC arch/x86/lib/kaslr.o
/tmp/kaslr-dfe1ad.s: Assembler messages:
/tmp/kaslr-dfe1ad.s:182: Error: no instruction mnemonic suffix given and no register operands; can't size instruction
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Davidson <md@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170501224741.133938-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[nc: Apply to aslr.c in get_random_long as the kaslr shift didn't happen
until 4.8 in commit d899a7d146a2]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fdb2726f4e61c5e3abc052f547d5a5f6c0dc5504 upstream.
aes_ctrby8_avx-x86_64.S uses the C preprocessor for token pasting
of character sequences that are not valid preprocessor tokens.
While this is allowed when preprocessing assembler files it exposes
an incompatibilty between the clang and gcc preprocessors where
clang does not strip leading white space from macro parameters,
leading to the CONCAT(%xmm, i) macro expansion on line 96 resulting
in a token with a space character embedded in it.
While this could be resolved by deleting the offending space character,
the assembler is perfectly capable of doing the token pasting correctly
for itself so we can just get rid of the preprocessor macros.
Signed-off-by: Michael Davidson <md@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c4fd1ac3ff167c91272dc43c7bfd2269ef61557 upstream.
clang currently does not support these optimizations, only enable them
when they are available.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Davidson <md@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: grundler@chromium.org
Link: http://lkml.kernel.org/r/20170413172609.118122-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
clang raises 'asm-operand-widths' warnings in inline assembly code when
the size of an operand is < 64 bits and the operand width is unspecified.
Most warnings are raised in macros, i.e. the datatype of the operand may
vary.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
nc: I trimmed the original commit message since I'm not a part of CrOS
and can't speak on their behalf.
To fix these warnings, it requires a fairly intrusive backport of
the sysreg conversion that Mark Rutland did in 4.9. I think
disabling the warning is smarter, similar to commit d41d0fe374d4
("turn off -Wattribute-alias") in this tree.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef8c4ed9db80261f397f0c0bf723684601ae3b52 upstream.
When using a GCC cross toolchain which is not in a compiled in
Clang search path, Clang reverts to the system assembler and
linker. This leads to assembler or linker errors, depending on
which tool is first used for a given architecture.
It seems that Clang is not searching $PATH for a matching
assembler or linker.
Make sure that Clang picks up the correct assembler or linker by
passing the cross compilers bin directory as search path.
This allows to use Clang provided by distributions with GCC
toolchains not in /usr/bin.
Link: https://github.com/ClangBuiltLinux/linux/issues/78
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-and-tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Adjust context]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f0e8de334c54c38818a4a5390a39aa09deff5bf upstream.
In order to make sure compiler flag detection for ARM works
correctly the no-integrated-as flags need to be set before
including the arch specific Makefile.
Fixes: cfe17c9bbe6a ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Adjust context]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a5f41767444cc3b4fc5573921ab914b4f78baaa upstream.
Currently, GCC disables -Wunused-const-variable, but not
-Wunused-variable, so warns unused variables if they are
non-constant.
While, Clang does not warn unused variables at all regardless of
the const qualifier because -Wno-unused-const-variable is implied
by the stronger option -Wno-unused-variable.
Disable -Wunused-const-variable instead of -Wunused-variable so that
GCC and Clang work in the same way.
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df16aaac26e92e97ab7234d3f93c953466adc4b5 upstream.
When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings
that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC
targets. These were added in commit 61163efae020 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").
Clang does not support -fno-delete-null-pointer-checks, so adding it to
HOSTCFLAGS if HOSTCC is clang does not make sense.
It's not clear why the other warnings were disabled, and just for
HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile
with clang just fine.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Adjust context]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb3f38c3c5b759163e09b9152629cc789731de47 upstream.
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfe17c9bbe6a673fdafdab179c32b355ed447f66 upstream.
Geert reported commit ae6b289a3789 ("kbuild: Set KBUILD_CFLAGS before
incl. arch Makefile") broke cross-compilation using a cross-compiler
that supports less compiler options than the host compiler.
For example,
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
This problem happens on architectures that setup CROSS_COMPILE in their
arch/*/Makefile.
Move the cc-option and cc-disable-warning back to the original position,
but keep the Clang target options untouched.
Fixes: ae6b289a3789 ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
[nc: Adjust context]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
