summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren3-8/+4
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: OMAP3: Fix hardware detection for omap3630 when booted with device treeNishanth Menon2-1/+19
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03ARM: OMAP2: gpmc-onenand: fix sync mode setup with DTAaro Koskinen1-1/+11
With DT-based boot, the GPMC OneNAND sync mode setup does not work correctly. During the async mode setup, sync flags gets incorrectly set in the onenand_async data and the system crashes during the async setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so even without the crash, the actual sync mode setup would never be called. The patch fixes this by adjusting the gpmc_onenand_data->flags when the data is read from the DT. Also while doing this we force the onenand_async to be always async. The patch enables to use the following DTS chunk (that should correspond the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950, which currently crashes with 3.12-rc1. The crash output can be also found below. &gpmc { ranges = <0 0 0x04000000 0x20000000>; onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000000>; gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; }; }; [ 1.467559] GPMC CS0: cs_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.474822] GPMC CS0: cs_rd_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.482116] GPMC CS0: cs_wr_off : 14 ticks, 71 ns (was 24 ticks) 71 ns [ 1.489349] GPMC CS0: adv_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.496582] GPMC CS0: adv_rd_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.503845] GPMC CS0: adv_wr_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.511077] GPMC CS0: oe_on : 3 ticks, 15 ns (was 4 ticks) 15 ns [ 1.518310] GPMC CS0: oe_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.525543] GPMC CS0: we_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.532806] GPMC CS0: we_off : 8 ticks, 40 ns (was 24 ticks) 40 ns [ 1.540039] GPMC CS0: rd_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.547302] GPMC CS0: wr_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.554504] GPMC CS0: access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.561767] GPMC CS0: page_burst_access: 0 ticks, 0 ns (was 3 ticks) 0 ns [ 1.569641] GPMC CS0: bus_turnaround: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.577270] GPMC CS0: cycle2cycle_delay: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.585144] GPMC CS0: wait_monitoring: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.592834] GPMC CS0: clk_activation: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.600463] GPMC CS0: wr_data_mux_bus: 5 ticks, 25 ns (was 8 ticks) 25 ns [ 1.608154] GPMC CS0: wr_access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.615386] GPMC CS0 CLK period is 5 ns (div 1) [ 1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442 [ 1.633178] Internal error: : 1008 [#1] ARM [ 1.637573] Modules linked in: [ 1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26 [ 1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000 [ 1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0 [ 1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4 [ 1.667083] pc : [<c002e040>] lr : [<c001f384>] psr: 60000113 [ 1.667083] sp : ef051d10 ip : ef051ce0 fp : ef051d94 [ 1.679138] r10: c0caaf60 r9 : ef050000 r8 : ef18b32c [ 1.684631] r7 : f0080000 r6 : c0caaf60 r5 : 00000000 r4 : f009e400 [ 1.691497] r3 : f009e442 r2 : 80050000 r1 : 00000014 r0 : 00000000 [ 1.698333] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.706024] Control: 10c5387d Table: af290019 DAC: 00000015 [ 1.712066] Process swapper (pid: 1, stack limit = 0xef050240) [ 1.718200] Stack: (0xef051d10 to 0xef052000) [ 1.722778] 1d00: 00004000 00001402 00000000 00000005 [ 1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005 [ 1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000 [ 1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000 [ 1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868 [ 1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074 [ 1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4 [ 1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104 [ 1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328 [ 1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48 [ 1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040 [ 1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88 [ 1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc [ 1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080 [ 1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8 [ 1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08 [ 1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08 [ 1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868 [ 1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff [ 1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000 [ 1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000 [ 1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000 [ 1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.929199] Backtrace: [ 1.931793] [<c002dfa8>] (gpmc_onenand_setup+0x0/0x1e0) from [<c024447c>] (omap2_onenand_probe+0x118/0x49c) [ 1.942047] [<c0244364>] (omap2_onenand_probe+0x0/0x49c) from [<c01fd508>] (platform_drv_probe+0x20/0x24) [ 1.952117] r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c [ 1.959197] [<c01fd4e8>] (platform_drv_probe+0x0/0x24) from [<c01fc204>] (driver_probe_device+0x10c/0x224) [ 1.969360] [<c01fc0f8>] (driver_probe_device+0x0/0x224) from [<c01fc3b0>] (__driver_attach+0x94/0x98) [ 1.979125] r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40 [ 1.985107] [<c01fc31c>] (__driver_attach+0x0/0x98) from [<c01fa794>] (bus_for_each_dev+0x5c/0x90) [ 1.994506] r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc [ 2.000488] [<c01fa738>] (bus_for_each_dev+0x0/0x90) from [<c01fbcfc>] (driver_attach+0x24/0x28) [ 2.009735] r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500 [ 2.014587] [<c01fbcd8>] (driver_attach+0x0/0x28) from [<c01fb838>] (bus_add_driver+0xdc/0x260) [ 2.023742] [<c01fb75c>] (bus_add_driver+0x0/0x260) from [<c01fca30>] (driver_register+0x80/0xfc) [ 2.033081] r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500 [ 2.040161] [<c01fc9b0>] (driver_register+0x0/0xfc) from [<c01fd728>] (__platform_driver_register+0x50/0x64) [ 2.050476] r5:00000006 r4:c04975b8 [ 2.054260] [<c01fd6d8>] (__platform_driver_register+0x0/0x64) from [<c048808c>] (omap2_onenand_driver_init+0x18/0x20) [ 2.065490] [<c0488074>] (omap2_onenand_driver_init+0x0/0x20) from [<c0008888>] (do_one_initcall+0xf4/0x150) [ 2.075836] [<c0008794>] (do_one_initcall+0x0/0x150) from [<c046db8c>] (kernel_init_freeable+0xf0/0x1b4) [ 2.085815] [<c046da9c>] (kernel_init_freeable+0x0/0x1b4) from [<c0348fe0>] (kernel_init+0x10/0xec) [ 2.095336] [<c0348fd0>] (kernel_init+0x0/0xec) from [<c000e7f8>] (ret_from_fork+0x14/0x3c) [ 2.104125] r4:00000000 r3:00000000 [ 2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0) [ 2.114318] ---[ end trace b8ee3e3e5e002451 ]--- Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-30Linux 3.12-rc3v3.12-rc3Linus Torvalds1-1/+1
2013-09-30Merge tag 'usb-3.12-rc3' of ↵Linus Torvalds21-107/+201
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 3.12-rc3. These are all for host controller issues that have been reported, and there's a fix for an annoying error message that gets printed every time you remove a USB 3 device from the system that's been bugging me for a while" * tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: add support for Merrifield USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization USB: Fix breakage in ffs_fs_mount() fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA usb: chipidea: udc: free pending TD at removal procedure usb: chipidea: imx: Add usb_phy_shutdown at probe's error path usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal usb: chipidea: udc: fix the oops after rmmod gadget USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd USB: OHCI: accept very late isochronous URBs USB: UHCI: accept very late isochronous URBs USB: iMX21: accept very late isochronous URBs usbcore: check usb device's state before sending a Set SEL control transfer xhci: Fix race between ep halt and URB cancellation usb: Fix xHCI host issues on remote wakeup. xhci: Ensure a command structure points to the correct trb on the command ring xhci: Fix oops happening after address device timeout
2013-09-30Merge tag 'tty-3.12-rc3' of ↵Linus Torvalds5-13/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some serial at tty driver fixes for 3.12-rc3 The serial driver fixes some kref leaks, documentation is moved to the proper places, and the tty and n_tty fixes resolve some reported regressions. There is still one outstanding tty regression fix that isn't in here yet, as I want to test it out some more, it will be sent for 3.12-rc4 if it checks out" * tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: ar933x_uart: move devicetree binding documentation tty: Fix SIGTTOU not sent with tcflush() n_tty: Fix EOF push index when termios changes serial: pch_uart: remove unnecessary tty_port_tty_get serial: pch_uart: fix tty-kref leak in dma-rx path serial: pch_uart: fix tty-kref leak in rx-error path serial: tegra: fix tty-kref leak
2013-09-30Merge tag 'staging-3.12-rc3' of ↵Linus Torvalds12-16/+31
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some staging driver fixes, MAINTAINER updates, and a new device id. All of these have been in the linux-next tree, and are pretty simple patches" * tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID staging: imx-drm: Fix probe failure staging: vt6656: [BUG] iwctl_siwencodeext return if device not open staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier. staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD. Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb staging: usbip: Orphan usbip staging: r8188eu: Add files for new drive: Cocci spatch "noderef" staging: r8188eu: Cocci spatch "noderef" staging: octeon-usb: Cocci spatch "noderef" staging: r8188eu: Add files for new drive: Cocci spatch "noderef" MAINTAINERS: staging: dgnc and dgap drivers: add maintainer staging: lustre: Cocci spatch "noderef"
2013-09-30Merge tag 'driver-core-3.12-rc3' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / sysfs fixes from Greg KH: "Here are 2 fixes for 3.12-rc3. One fixes a sysfs problem with mounting caused by 3.12-rc1, and the other is a bug reported by the chromeos developers with the driver core. Both have been in linux-next for a bit" * tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core : Fix use after free of dev->parent in device_shutdown sysfs: Allow mounting without CONFIG_NET
2013-09-30Merge tag 'char-misc-3.12-rc3' of ↵Linus Torvalds12-50/+116
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some HyperV and MEI driver fixes for 3.12-rc3. They resolve some issues that people have been reporting for them" * tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout Drivers: hv: util: Correctly support ws2008R2 and earlier mei: cancel stall timers in mei_reset mei: bus: stop wait for read during cl state transition mei: make me client counters less error prone
2013-09-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-26/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf revert from Ingo Molnar: "This fixes the 'perf top' regression Markus Trippelsdorf reported" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "perf symbols: Demangle cloned functions"
2013-09-29Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds26-77/+266
Pull drm fixes from Dave Airlie: "Nothing too major, radeon still has some dpm changes for off by default. Radeon, intel, msm: - radeon: a few more dpm fixes (still off by default), uvd fixes - i915: runtime warn backtrace and regression fix - msm: iommu changes fallout" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits) drm/msm: use drm_gem_dumb_destroy helper drm/msm: deal with mach/iommu.h removal drm/msm: Remove iommu include from mdp4_kms.c drm/msm: Odd PTR_ERR usage drm/i915: Fix up usage of SHRINK_STOP drm/radeon: fix hdmi audio on DCE3.0/3.1 asics drm/i915: preserve pipe A quirk in i9xx_set_pipeconf drm/i915/tv: clear adjusted_mode.flags drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER drm/radeon/cik: fix overflow in vram fetch drm/radeon: add missing hdmi callbacks for rv6xx drm/i915: Use a temporary va_list for two-pass string handling drm/radeon/uvd: lower msg&fb buffer requirements on UVD3 drm/radeon: disable tests/benchmarks if accel is disabled drm/radeon: don't set default clocks for SI when DPM is disabled drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables drm/radeon/dpm: fetch the max clk from voltage dep tables helper ...
2013-09-29Revert "perf symbols: Demangle cloned functions"Ingo Molnar1-26/+1
This reverts commit de95ab53645a2f0015e0f68ee723f18dce2b8b51. Markus Trippelsdorf reported that this commit broke 'perf top': > I just see a gray screen with no text at all. Sometimes the > following error messages are printed: > > *** Error in `perf': invalid fastbin entry (free): 0x00000000029b18c0 > *** > *** Error in `perf': malloc(): memory corruption (fast): 0x0000000000ee0b10 *** While this code is fixable, the commit itself fails on several levels: - it should have been a separate helper function - why the heck does it do strchr() twice - it casts a const char * over into char * - sloppy style - it's not even a regression fix! So lets revert it and re-try the patch in v3.13. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-29Merge branch 'msm-fixes-3.12-rc2' of ↵Dave Airlie3-13/+4
git://people.freedesktop.org/~robclark/linux into drm-fixes A small fix + deal with fallout of iommu changes + use new drm_gem_dumb_destroy helper. * 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux: drm/msm: use drm_gem_dumb_destroy helper drm/msm: deal with mach/iommu.h removal drm/msm: Remove iommu include from mdp4_kms.c drm/msm: Odd PTR_ERR usage
2013-09-29Merge branches 'sched-urgent-for-linus', 'timers-urgent-for-linus' and ↵Linus Torvalds7-6/+31
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler, timer and x86 fixes from Ingo Molnar: - A context tracking ARM build and functional fix - A handful of ARM clocksource/clockevent driver fixes - An AMD microcode patch level sysfs reporting fixlet * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm: Fix build error with context tracking calls * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast clocksource: of: Respect device tree node status clocksource: exynos_mct: Set IRQ affinity when the CPU goes online arm: clocksource: mvebu: Use the main timer as clock source from DT * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Fix patch level reporting for family 15h
2013-09-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds8-41/+75
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A couple of tooling fixlets and a PMU detection printout fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix PMU detection printout when no PMU is detected perf symbols: Demangle cloned functions perf machine: Fix path unpopulated in machine__create_modules() perf tools: Explicitly add libdl dependency perf probe: Fix probing symbols with optimization suffix perf trace: Add mmap2 handler perf kmem: Make it work again on non NUMA machines
2013-09-29Merge tag 'xfs-for-linus-v3.12-rc3' of git://oss.sgi.com/xfs/xfsLinus Torvalds5-22/+68
Pull xfs bugfixes from Ben Myers: - fix for directory node collapse regression - fix for recovery over stale on disk structures - fix for eofblocks ioctl - fix asserts in xfs_inode_free - lock the ail before removing an item from it * tag 'xfs-for-linus-v3.12-rc3' of git://oss.sgi.com/xfs/xfs: xfs: fix node forward in xfs_node_toosmall xfs: log recovery lsn ordering needs uuid check xfs: fix XFS_IOC_FREE_EOFBLOCKS definition xfs: asserting lock not held during freeing not valid xfs: lock the AIL before removing the buffer item
2013-09-29Merge branch 'i2c/for-current' of ↵Linus Torvalds4-15/+32
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: ismt: initialize DMA buffer i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is set i2c: mv64xxx: Do not use writel_relaxed() i2c: mv64xxx: Fix some build warnings i2c: s3c2410: fix clk_disable/clk_unprepare WARNings
2013-09-29Merge tag 'pm+acpi-3.12-rc3' of ↵Linus Torvalds5-12/+23
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These fix one recent cpufreq regression, a few older bugs that may harm users and a kerneldoc typo. Specifics: 1) After the recent locking changes in the cpufreq core it is possible to trigger BUG_ON(!policy) in lock_policy_rwsem_read() if cpufreq_get() is called before registering a cpufreq driver. Fix from Viresh Kumar. 2) If intel_pstate has been loaded already, it doesn't make sense to do anything in acpi_cpufreq_init() and moreover doing something in there in that case may be harmful, so make that function return immediately if another cpufreq driver is already present. From Yinghai Lu. 3) The ACPI IPMI driver sometimes attempts to acquire a mutex from interrupt context, which can be avoided by replacing that mutex with a spinlock. From Lv Zheng. 4) A NULL pointer may be dereferenced by the exynos5440 cpufreq driver if a memory allocation made by it fails. Fix from Sachin Kamat. 5) Hanjun Guo's commit fixes a typo in the kerneldoc comment documenting acpi_bus_unregister_driver()" * tag 'pm+acpi-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: fix typo in comments of acpi_bus_unregister_driver() cpufreq: exynos5440: Fix potential NULL pointer dereference cpufreq: check cpufreq driver is valid and cpufreq isn't disabled in cpufreq_get() acpi-cpufreq: skip loading acpi_cpufreq after intel_pstate ACPI / IPMI: Fix atomic context requirement of ipmi_msg_handler()
2013-09-29PCI: Workaround missing pci_set_master in pci driversYinghai Lu1-1/+7
Ben Herrenschmidt found that commit 928bea964827 ("PCI: Delay enabling bridges until they're needed") breaks PCI in some powerpc environments. The reason is that the PCIe port driver will call pci_enable_device() on the bridge, so the device is enabled, but skips pci_set_master because pcie_port_auto and no acpi on powerpc. Because of that, pci_enable_bridge() later on (called as a result of the child device driver doing pci_enable_device) will see the bridge as already enabled and will not call pci_set_master() on it. Fixed by add checking in pci_enable_bridge, and call pci_set_master if driver skip that. That will make the code more robot and wade off problem for missing pci_set_master in drivers. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-28Merge branch 'lockref' of ↵Linus Torvalds7-10/+20
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 lockref enablement from Heiko Carstens: "Enabling the new lockless lockref variant on s390 would have been trivial until Tony Luck added a cpu_relax() call into the CMPXCHG_LOOP(), with commit d472d9d98b46 ("lockref: Relax in cmpxchg loop") As already mentioned cpu_relax() is very expensive on s390 since it yields() the current virtual cpu. So we are talking of several thousand cycles. Considering this enabling the lockless lockref variant would contradict the intention of the new semantics. And also some quick measurements show performance regressions of 50% and more. Simply removing the cpu_relax() call again seems also not very desireable since Waiman Long reported that for some workloads the call improved performance by 5%." * 'lockref' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: enable ARCH_USE_CMPXCHG_LOCKREF lockref: use arch_mutex_cpu_relax() in CMPXCHG_LOOP() mutex: replace CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX with simple ifdef
2013-09-28kernel/params: fix handling of signed integer typesJean Delvare1-3/+3
Commit 6072ddc8520b ("kernel: replace strict_strto*() with kstrto*()") broke the handling of signed integer types, fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Christian Kujau <lists@nerdbynature.de> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-28Merge tag 'devicetree-fixes' of ↵Linus Torvalds6-71/+23
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: "Clean-up to fix some warnings for !OF builds and spelling fixes in docs: - Clean-up openrisc prom.h - Fix warnings caused by of_irq.h ifdefs - Spelling fix for Synopsys" * tag 'devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dts: Fix misspelling of Synopsys of: clean-up ifdefs in of_irq.h openrisc: clean-up prom.h
2013-09-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds4-7/+13
Pull ARM fixes from Russell King: "Just a few relatively small ARM fixes found since the last merge window, nothing too exciting" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7837/3: fix Thumb-2 bug in AES assembler code ARM: only allow kernel mode neon with AEABI ARM: 7839/1: entry: fix tracing of ARM-private syscalls ARM: 7836/1: add __get_user_unaligned/__put_user_unaligned
2013-09-28i2c: ismt: initialize DMA bufferJames Ralston1-0/+3
This patch adds code to initialize the DMA buffer to compensate for possible hardware data corruption. Signed-off-by: James Ralston <james.d.ralston@intel.com> [wsa: changed to use 'sizeof'] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-28drm/msm: use drm_gem_dumb_destroy helperRob Clark2-8/+1
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-28drm/msm: deal with mach/iommu.h removalRob Clark1-2/+2
We still need an API exported by msm iommu driver (but not visible in any public header anymore). For now, just declare the prototype ourselves, but when msm iommu driver provides a better option, use that instead. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-28perf/x86: Fix PMU detection printout when no PMU is detectedIngo Molnar1-1/+1
Ran into this cryptic PMU bootup log recently: [ 0.124047] Performance Events: [ 0.125000] smpboot: ... Turns out we print this if no PMU is detected. Fall back to the right condition so that the following is printed: [ 0.122381] Performance Events: no PMU driver, software events only. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-u2fwaUffakjp0qkpRfqljgsn@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28drm/msm: Remove iommu include from mdp4_kms.cJoerg Roedel1-2/+0
The include file has been removed and the file does not need it anyway, so remove it. Fixes a compile error. Signed-off-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-28drm/msm: Odd PTR_ERR usageThomas Meyer1-1/+1
The variable priv->kms is not initialized yet. Found by "scripts/coccinelle/tests/odd_ptr_err.cocci". PTR_ERR should access the value just tested by IS_ERR. Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
2013-09-28s390: enable ARCH_USE_CMPXCHG_LOCKREFHeiko Carstens2-0/+6
Enable ARCH_USE_CMPXCHG_LOCKREF since it shows performance improvements with Linus' simple stat() test case of up to 50% on a 30 cpu system. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28lockref: use arch_mutex_cpu_relax() in CMPXCHG_LOOP()Heiko Carstens1-1/+9
Make use of arch_mutex_cpu_relax() so architectures can override the default cpu_relax() semantics. This is especially useful for s390, where cpu_relax() means that we yield() the current (virtual) cpu and therefore is very expensive, and would contradict the whole purpose of the lockless cmpxchg loop. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28mutex: replace CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX with simple ifdefHeiko Carstens5-9/+5
Linus suggested to replace #ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX #define arch_mutex_cpu_relax() cpu_relax() #endif with just a simple #ifndef arch_mutex_cpu_relax # define arch_mutex_cpu_relax() cpu_relax() #endif to get rid of CONFIG_HAVE_CPU_RELAX_SIMPLE. So architectures can simply define arch_mutex_cpu_relax if they want an architecture specific function instead of having to add a select statement in their Kconfig in addition. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28Merge branch 'context_tracking/fixes' of ↵Ingo Molnar2-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into sched/urgent Pull context tracking ARM fix from Frederic Weisbecker. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie18-57/+230
into drm-fixes More radeon fixes for 3.12. Kind of all over the place: UVD, DPM, tiling, etc. * 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix hdmi audio on DCE3.0/3.1 asics drm/radeon/cik: fix overflow in vram fetch drm/radeon: add missing hdmi callbacks for rv6xx drm/radeon/uvd: lower msg&fb buffer requirements on UVD3 drm/radeon: disable tests/benchmarks if accel is disabled drm/radeon: don't set default clocks for SI when DPM is disabled drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables drm/radeon/dpm: fetch the max clk from voltage dep tables helper drm/radeon: fix missed variable sized access drm/radeon: Make r100_cp_ring_info() and radeon_ring_gfx() safe (v2) drm/radeon/cik: Add tiling mode index for 1D tiled depth/stencil surfaces drm/radeon/cik: Fix encoding of number of banks in tiling configuration info drm/radeon/cik: Fix printing of client name on VM protection fault drm/radeon: additional gcc fixes for radeon_atombios.c drm/radeon: avoid UVD corruption on AGP cards using GPU gart
2013-09-28Merge tag 'drm-intel-fixes-2013-09-26' of ↵Dave Airlie5-7/+32
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a few fixes for regressions and other serious stuff. Two fix state tracking mismatches, together with an additional patch that I've submitted to stable (somehow forgotten to tag it) we should have them fixed now (I hope). * tag 'drm-intel-fixes-2013-09-26' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix up usage of SHRINK_STOP drm/i915: preserve pipe A quirk in i9xx_set_pipeconf drm/i915/tv: clear adjusted_mode.flags drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER drm/i915: Use a temporary va_list for two-pass string handling
2013-09-27Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix potential crash condition in applesmc driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Check key count before proceeding
2013-09-27Merge tag 'sound-3.12' of ↵Linus Torvalds5-25/+131
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing too serious here: a couple of compress-offload core fixes, Haswell HDMI audio fix, a fixup for new MacBook Airs and a few COEF setups for ALC283 mic problems" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283 ALSA: hda - Fix Internal Mic boost can't control with ALC283 ALSA: hda - Add documentation for CS4208 fixups ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codec ALSA : hda - not use assigned converters for all unused pins ALSA: compress: Make sure we trigger STOP before closing the stream. ALSA: compress: Fix compress device unregister.
2013-09-27Merge tag 'fbdev-fixes-3.12' of ↵Linus Torvalds10-30/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: "Small fbdev fixes for various fb drivers" * tag 'fbdev-fixes-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: mxsfb: Add missing break video: of: display_timing: correct display-timings node finding neofb: fix error return code in neofb_probe() s3fb: fix error return code in s3_pci_probe() video: mmp: drop needless devm cleanup OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier OMAPDSS: DISPC: set irq_safe for runtime PM OMAPDSS: Return right error during connector probe
2013-09-27Merge branch 'for_linus' of ↵Linus Torvalds4-97/+52
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs and UDF fixes from Jan Kara: "The contains fix of an UDF oops when mounting corrupted media and a fix of a race in reiserfs leading to oops" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix race with flush_used_journal_lists and flush_journal_list reiserfs: remove useless flush_old_journal_lists udf: Fortify LVID loading
2013-09-27sysfs: Allow mounting without CONFIG_NETEric W. Biederman1-4/+1
In kobj_ns_current_may_mount the default should be to allow the mount. The test is only for a single kobj_ns_type at a time, and unless there is a reason to prevent it the mounting sysfs should be allowed. Subsystems that are not registered can't have are not involved so can't have a reason to prevent mounting sysfs. This is a bug-fix to commit 7dc5dbc879bd ("sysfs: Restrict mounting sysfs") that came in via the userns tree during the 3.12 merge window. Reported-and-tested-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-27lockref: allow relaxed cmpxchg64 variant for lockless updatesWill Deacon1-2/+11
The 64-bit cmpxchg operation on the lockref is ordered by virtue of hazarding between the cmpxchg operation and the reference count manipulation. On weakly ordered memory architectures (such as ARM), it can be of great benefit to omit the barrier instructions where they are not needed. This patch moves the lockless lockref code over to a cmpxchg64_relaxed operation, which doesn't provide barrier semantics. If the operation isn't defined, we simply #define it as the usual 64-bit cmpxchg macro. Cc: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-27i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE ↵Chew, Chiau Ee1-6/+20
is set According to Designware I2C spec, if I2C_DYNAMIC_TAR_UPDATE is set to 1, the 10-bit addressing mode is controlled by IC_10BITADDR_MASTER bit of IC_TAR register instead of IC_CON register. The IC_10BITADDR_MASTER in IC_CON register becomes read-only copy. Since I2C_DYNAMIC_TAR_UPDATE value can't be detected from hardware register, so we will always set the IC_10BITADDR_MASTER bit in both IC_CON and IC_TAR register whenever 10-bit addresing mode is requested by user application. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27i2c: mv64xxx: Do not use writel_relaxed()Thierry Reding1-2/+2
The driver is used on PowerPC which don't provide writel_relaxed(). This breaks the c2k and prpmc2800 default configurations. To fix the build, turn the calls to writel_relaxed() into writel(). The impacts for ARM should be minimal. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27i2c: mv64xxx: Fix some build warningsThierry Reding1-5/+7
Some functions and variables are only used if the configuration selects HAVE_CLK. Protect them with a corresponding #ifdef CONFIG_HAVE_CLK block to avoid compiler warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> [wsa: added marker to #endif] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27i2c: s3c2410: fix clk_disable/clk_unprepare WARNingsKim Phillips1-2/+0
commit d16933b33914a6dff38a4ecbe8edce44a17898e8 "i2c: s3c2410: Move location of clk_prepare_enable() call in probe function" refactored clk_enable and clk_disable calls yet neglected to remove the clk_disable_unprepare call in the module's remove(). It helps remove warnings on an arndale during unbind: echo 12c90000.i2c > /sys/bus/platform/devices/12c90000.i2c/driver/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:842 clk_disable+0x18/0x24() Modules linked in: CPU: 0 PID: 2548 Comm: bash Not tainted 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c4a64>] (clk_disable+0x18/0x24) [<c02c4a64>] (clk_disable+0x18/0x24) from [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a6 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c() Modules linked in: CPU: 0 PID: 2548 Comm: bash Tainted: G W 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c5834>] (clk_unprepare+0x14/0x1c) [<c02c5834>] (clk_unprepare+0x14/0x1c) from [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a7 ]--- Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27arm: Fix build error with context tracking callsFrederic Weisbecker2-4/+16
ad65782fba50 (context_tracking: Optimize main APIs off case with static key) converted context tracking main APIs to inline function and left ARM asm callers behind. This can be easily fixed by making ARM calling the post static keys context tracking function. We just need to replicate the static key checks there. We'll remove these later when ARM will support the context tracking static keys. Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Kevin Hilman <khilman@linaro.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Anil Kumar <anilk4.v@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kevin Hilman <khilman@linaro.org>
2013-09-27ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283Kailang Yang1-1/+12
More thorough testing showed that these verbs were necessary to improve quality of the internal mic. Patch originally from Realtek. BugLink: https://bugs.launchpad.net/bugs/1231931 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27ALSA: hda - Fix Internal Mic boost can't control with ALC283Kailang Yang1-0/+3
ALC283 pin control for Line1 default control by hidden register. Use line1 as internal Mic will not get sound when boost value up. Set control by verb for hidden register will solve this issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27ALSA: hda - Add documentation for CS4208 fixupsTakashi Iwai1-0/+6
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codecBen Whitten1-5/+67
This patch adds the default pin configuration and some init verbs for setting COEFs, in addition to the correction of input pin AMP caps for MacBook Air 6,1 and 6,2. With these changes, the headphone jack detection starts working properly. [trivial space fixes by tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811 Signed-off-by: Ben Whitten <benwhitten@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 09:38:11 +0300