summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-06-16ath5k: remove pointless rx error overlay structBruno Randolf3-29/+9
ath5k_hw_rx_error was only used once, where we could easily just use ath5k_hw_rx_status as well, so remove it. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: cosmetic changes in ath5k_hw_proc_5212_rx_status()Bruno Randolf1-5/+5
Just whitespace and indentation. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: use direct function calls for descriptors when possibleBruno Randolf3-38/+20
Use direct function calls for ath5k_hw_setup_rx_desc() and ath5k_hw_setup_mrr_tx_desc() instead of a function pointer which always pointed to the same function in the case of ath5k_hw_setup_rx_desc() and which is easily unified in the case of ath5k_hw_setup_mrr_tx_desc(). Also simplify the initialization function for the remaining function pointers. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: move checks and stats into new functionBruno Randolf1-60/+70
Create a new function ath5k_receive_frame_ok() which checks for errors, updates error statistics and tells us if we want to further "receive" this frame or not. This way we can avoid a goto and have a cleaner separation between buffer handling and other things. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: split descriptor handling and frame receiveBruno Randolf1-71/+78
Move frame reception into it's own function to have a clearer separation between buffer and descriptor handling and things that are done when we actually receive a frame. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: unify rx descriptor error handlingBruno Randolf1-2/+1
There is no reason for a special handling (return) here, just break like we do with the checks before. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: reset more pointers after we free skbsBruno Randolf1-0/+7
After we free skbs for receive or transmit descriptors, make sure we have no pointers to the now invalid memory address. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: print more errors when decriptor setup failsBruno Randolf1-1/+3
Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: fix rx descriptor debuggingBruno Randolf1-2/+2
In the debug ouptut rx_status_0 was printed twice instead of rx_status_1. Also make the debug message more clear. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: fix some comment typosBruno Randolf2-4/+4
Fix comment about dma sizes, brackets were missing. Replace 'insure' with 'ensure'. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: rename ath5k_txbuf_free() to ath5k_txbuf_free_skb()Bruno Randolf1-8/+9
Rename ath5k_txbuf_free() to ath5k_txbuf_free_skb() since this is what it does: it frees the skb and not the buf. Same for ath5k_rxbuf_free(). Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath5k: more debug prints for resetsBruno Randolf2-3/+12
Add a debug print for every case of reset. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ipw2200: Enable LED by defaultubuntu@tjworld.net2-3/+3
BugLink: http://bugs.launchpad.net/bugs/21367 Enable LED by default and update the MODULE_PARM_DESC. The original reason for defaulting to disabled was documented in 2005 and noted, "The LED code has been reported to hang some systems when running ifconfig and is therefore disabled by default." This no longer appears applicable and users have been requesting this be enabled for several years. Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16p54usb: Comment out duplicate Medion MD40900 device idLeann Ogasawara1-1/+2
The Medion MD40900 device id [0x0cde, 0x0006] is defined twice. Comment out the duplicate. Originally-by: Ben Collins <ben.collins@ubuntu.com> Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16zd1211rw: change ZD_REGDOMAIN_JAPAN_* namingJohn W. Linville2-4/+4
ZD_REGDOMAIN_JAPAN_ADD and ZD_REGDOMAIN_JAPAN_GW_US54GXS seem a little verbose to me... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16zd1211rw: add 0x49 -> JP regulatory domain mapKouhei Sutou2-0/+2
0x49 is used by PLANEX GW-US54GXS (2019:5303). Signed-off-by: Kouhei Sutou <kou@clear-code.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath9k_htc: Fix ampdu_action callbackSujith4-92/+45
Now that ampdu_action() can sleep, remove all the driver hacks and just issue WMI commands to the target. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16ath9k_hw: avoid setting cwmin/cwmax to 0 for IBSS for AR9003Luis R. Rodriguez1-2/+7
IBSS requires the cwmin and cwmax to be respected when we reset the txqueues on AR9003 otherwise the distribution of beacons will be balanced towards the AR9003 card first preventing equal contention for air time for other peers on the IBSS. Without this IBSS will work but only the AR9003 card will be be issuing beacons on the IBSS. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Synchronize WCID initialization with legacy driverIvo van Doorn2-9/+26
Legacy rt2870 driver handles WCID differently then we expected, the BSSID and Cipher value are 3 bit values, while the 4th bit should be set elsewhere in an extended field. After this, rt2800usb reports frames have been decrypted successfully, indicating that the Hardware decryption now is working correctly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Enable HW crypto by defaultIvo van Doorn2-2/+2
Hardware cryptography seems to be working on a 11G network with WPA/WPA2 cryptography enabled. WEP still needs to be tested... Signed-of-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Limit TX done looping to number of TX ring entriesIvo van Doorn1-14/+9
Similar to rt2800pci, remove the check for duplicate register reading, and instead limit the for-loop to the maximum number of TX entries inside a queue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Update author rt2800libIvo van Doorn1-5/+6
rt2800lib has been under development of the rt2x00 project, so add it to the author string for the module information. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Enable fallback rates for rt61pci and rt73usbIvo van Doorn2-0/+25
Explicitly enable the usage of fallback rates for the transmission of frames with rt61pci and rt73usb hardware. Note that for txdone reporting, only rt61pci is capable of reporting the fallback rates, for USB it is not possible to determine the number of retries. However the device will use the fallback rates, so it might still help in the performance. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Fix tx status reporting when falling back to the lowest rateHelmut Schaa1-1/+12
In some corner cases the reported tx rates/retries didn't match the really used ones. The hardware lowers the tx rate on each consecutive retry by 1 (but won't fall back from MCS to legacy rates) _until_ it reaches the lowest one. In case the frame wasn't sent succesful the number of retries is 7 and if a rate index <7 was used the previous code reported negative rate indexes which were then ignored by the rate control algorithm and mac80211. Instead, report the remaining number of retries to have happened with the lowest rate (index 0). This should give the rate control algorithm slightly more accurate information about the used tx rates/retries. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: provide mac80211 a suitable max_rates valueHelmut Schaa1-0/+12
Set up max_rates and max_rate_tries with suitable values even if we do not support the whole functionality. As rt2800 has a global fallback table we cannot specify more then one tx rate per frame but since the hw will try several different rates (based on the fallback table) we should still initialize max_rates to the maximum number of rates we are going to try. Otherwise mac80211 will truncate our reported tx rates and the rc algortihm will end up with incorrect data choosing unsuitable rates for tx. This improves throughput on rt2800 devices considerable. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Fix typo in rt2800_config_txpowerHelmut Schaa1-1/+1
Fix typo in rt2800_config_txpower. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Fix TX_STA_FIFO handlingHelmut Schaa1-14/+9
Currently rt2800pci will read TX_STA_FIFO until the previously read value matches the current value. However, it is obvious that TX_STA_FIFO only contains values that can easily be the same for multiple consecutive frames (especially when communicating with only one other STA). Hence, we often ended up with reading only the first entry and ignoring the rest. One result was that when the TX_STA_FIFO contained multiple entires, only the first one was read and properly handled while the others remained in the tx queue. Thus, drop this check but introduce a maximum number of reads. All legacy drivers use the size of the tx ring as limit but state that the TX_STA_FIFO has only 16 entries. So, let's just stick with the tx ring size for now. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Add comment about BBP1_TX_POWERHelmut Schaa1-1/+3
Add a comment about the meaning of BBP1_TX_POWER stating all possible values. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: Fix IEEE80211_TX_CTL_MORE_FRAMES handlingHelmut Schaa1-2/+7
IEEE80211_TX_CTL_MORE_FRAMES indicates that more frames are queued for tx but has nothing to do with fragmentation. Hence, don't set ENTRY_TXD_MORE_FRAG but only ENTRY_TXD_BURST to not kick the tx queues immediately. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: only set TXDONE_FALLBACK in rt2800pci if the frame was retriedHelmut Schaa1-2/+6
TXDONE_FALLBACK expresses that fallback rates were used for retries. Hence, it only makes sense to set the flag if retries > 0. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: don't use TXDONE_FALLBACK as success indicatorHelmut Schaa1-2/+1
TXDONE_FALLBACK doesn't express if the frame was sent successful or not. It only tells us that the hw used fallback rates for retries. Hence, don't use TXDONE_FALLBACK as success indicator. Before this patch we reported success to the rate control algorithm which was wrong in a number of cases and might have lead to improper tx rate selections. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16rt2x00: clarify meaning of txdone flagsHelmut Schaa1-1/+8
Update the documentation of the available txdone flags to better express how they should be used. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16mac80211: Use a separate CCMP PN receive counter for management framesJouni Malinen5-7/+22
When management frame protection (IEEE 802.11w) is used, we must use a separate counter for tracking received CCMP packet number for the management frames. The previously used NUM_RX_DATA_QUEUESth queue was shared with data frames when QoS was not used and that can cause problems in detecting replays incorrectly for robust management frames. Add a new counter just for robust management frames to avoid this issue. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16mac80211: Protect Deauthentication frame when using MFPJouni Malinen1-3/+7
When management frame protection (IEEE 802.11w) is used, Deauthentication frame needs to be protected when the pairwise key is configured. mac80211 was removing the station entry (and its keys) before actually sending out the Deauthentication frame. Fix this by reordering the code to send the frame before the station entry gets removed. This matches an earlier change that handled the Disassociation frame processing, but missed Deauthentication frames. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-16mac80211: Fix ps-qos network latency handlingJuuso Oikarinen5-18/+16
The ps-qos latency handling is broken. It uses predetermined latency values to select specific dynamic PS timeouts. With common AP configurations, these values overlap with beacon interval and are therefore essentially useless (for network latencies less than the beacon interval, PSM is disabled.) This patch remedies the problem by replacing the predetermined network latency values with one high value (1900ms) which is used to go trigger full psm. For backwards compatibility, the value 2000ms is still mapped to a dynamic ps timeout of 100ms. Currently also the mac80211 internal value for storing user space configured dynamic PSM values is incorrectly in the driver visible ieee80211_conf struct. Move it to the ieee80211_local struct. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: Fix circular locking dependency in ARP filter handlingJuuso Oikarinen7-88/+79
There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: remove BSS from cfg80211 list when leaving IBSSTeemu Paasikivi1-0/+25
Remove BSS from cfg80211 BSS list if we are only member in IBSS when leaving it. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: Set changed basic rates flagTeemu Paasikivi1-0/+1
Add changed basic rates flag to bss_changed while joinig ibss network. This patch is split from the patch containing support for setting basic rates when creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: Set basic rates while joining ibss networkTeemu Paasikivi4-1/+56
This patch adds support to nl80211 and mac80211 to set basic rates when joining/creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_DSFelix Fietkau2-21/+0
This capability check is no longer used, so it can be removed along with the now-obsolete ath9k_hw_getcapability function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k/ath9k_htc: remove redundand checks for dual-stream tx supportFelix Fietkau2-10/+4
mac80211 already masks the HT sta capabilities based on hardware support Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_MCAST_KEYSRCHFelix Fietkau4-44/+3
The driver always sets this to enabled, but this can be simplified with a small change to ah->sta_id1_defaults instead. This change also removes the now-obsolete ath9k_hw_setcapability function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_TKIP_SPLITFelix Fietkau4-14/+1
This is only used as a workaround for an issue in one specific hw revision. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_TKIP_MICFelix Fietkau4-34/+0
TKIP MIC support is always enabled anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_TXPOWFelix Fietkau4-23/+2
replace calls that read this capability with accesses to ath9k_hw's regulatory data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: remove ATH9K_CAP_CIPHERFelix Fietkau4-45/+16
All of the ciphers that are tested for are always supported Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k: enable AR9003 PCI IDsLuis R. Rodriguez1-0/+1
All AR9003 features are now complete so enable AR9003 support. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k: implement PA predistortion supportFelix Fietkau4-3/+137
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: add functions for controlling PA predistortion calibrationFelix Fietkau5-1/+746
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: add support for parsing PA predistortion related EEPROM fieldsFelix Fietkau5-5/+18
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 20:46:37 +0300