summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-08-21Bluetooth: Move the tty initialization and cleanup out of open/closeGianluca Anzolin1-42/+72
Move the tty_struct initialization from rfcomm_tty_open() to rfcomm_tty_install() and do the same for the cleanup moving the code from rfcomm_tty_close() to rfcomm_tty_cleanup(). Add also extra error handling in rfcomm_tty_install() because, unlike .open()/.close(), .cleanup() is not called if .install() fails. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Remove the device from the list in the destructorGianluca Anzolin1-21/+6
The current code removes the device from the device list in several places. Do it only in the destructor instead and in the error path of rfcomm_add_dev() if the device couldn't be initialized. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Take proper tty_struct referencesGianluca Anzolin1-12/+17
In net/bluetooth/rfcomm/tty.c the struct tty_struct is used without taking references. This may lead to a use-after-free of the rfcomm tty. Fix this by taking references properly, using the tty_port_* helpers when possible. The raw assignments of dev->port.tty in rfcomm_tty_open/close are addressed in the later commit 'rfcomm: Implement .activate, .shutdown and .carrier_raised methods'. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Set different event mask for LE-only controllersMarcel Holtmann1-0/+12
In case of a Low Energy only controller it makes no sense to configure the full BR/EDR event mask. It will just enable events that can not be send anyway and there is no guarantee that such a controller will accept this value. Use event mask 0x90 0xe8 0x04 0x02 0x00 0x80 0x00 0x20 for LE-only controllers which enables the following events: Disconnection Complete Encryption Change Read Remote Version Information Complete Command Complete Command Status Hardware Error Number of Completed Packets Data Buffer Overflow Encryption Key Refresh Complete LE Meta This is according to Core Specification, Part E, Section 3. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: Fix getting SCO socket options in deferred stateJohan Hedberg1-2/+6
When a socket is in deferred state there does actually exist an underlying connection even though the connection state is not yet BT_CONNECTED. In the deferred state it should therefore be allowed to get socket options that usually depend on a connection, such as SCO_OPTIONS and SCO_CONNINFO. This patch fixes the behavior of some user space code that behaves as follows without it: $ sudo tools/btiotest -i 00:1B:DC:xx:xx:xx -d -s accept=2 reject=-1 discon=-1 defer=1 sec=0 update_sec=0 prio=0 voice=0x0000 Listening for SCO connections bt_io_get(OPT_DEST): getsockopt(SCO_OPTIONS): Transport endpoint is not connected (107) Accepting connection Successfully connected to 60:D8:19:xx:xx:xx. handle=43, class=000000 The conditions that the patch updates the if-statements to is taken from similar code in l2cap_sock.c which correctly handles the deferred state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-21Bluetooth: use DIV_ROUND_UP in suitable places in btmrvl_sdioAndy Shevchenko1-2/+2
There are two places where DIV_ROUND_UP may be used. It makes code a bit clearer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: replace strict_strtol() with kstrtol()Jingoo Han1-3/+3
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: hidp: remove wrong send_report at initBenjamin Tissoires1-14/+0
The USB hid implementation does retrieve the reports during the start. However, this implementation does not call the HID command GET_REPORT (which would fetch the current status of each report), but use the DATA command, which is an Output Report (so transmitting data from the host to the device). The Wiimote controller is already guarded against this problem in the protocol, but it is not conformant to the specification to set all the reports to 0 on start. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: hidp: implement hidinput_input_event callbackBenjamin Tissoires1-0/+26
We can re-enable hidinput_input_event to allow the leds of bluetooth keyboards to be set. Now the callbacks uses hid core to retrieve the right HID report to send, so this version is safer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Add missing braces to an "else if"Gustavo Padovan1-1/+2
Trivial change in the coding style. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Use defines instead of integer literalsMikel Astiz1-4/+5
Replace the occurrences of integer literals in hci_event.c with the newly introduced macros in hci.h. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Use defines in in hci_get_auth_req()Mikel Astiz1-5/+8
Make the code in hci_get_auth_req() more readable by using the defined macros instead of inlining magic numbers. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Add HCI authentication capabilities macrosMikel Astiz1-0/+6
Add macros for the HCI capabilities as described in the Bluetooth Core Specification v4.0, Volume 2, part E, section 7.1.29. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Fix simple whitespace vs tab style issueMarcel Holtmann1-1/+1
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-24bgmac: make bgmac depend on bcm47xxHauke Mehrtens1-1/+1
bgmac uses bcm47xx_nvram.h which is only available when BCM47XX was selected. Earlier BCMA_HOST_SOC depended on BCM47XX so this was not build on any other archs, but that changed. We should modify this driver to get access to the nvram or the variables through platform data. This fixes a build problem in linux-next reported by Stephen Rothwell: drivers/net/ethernet/broadcom/bgmac.c:19:27: fatal error: bcm47xx_nvram.h: No such file or directory #include <bcm47xx_nvram.h> ^ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24wireless: rt2x00: rt2800usb: add RT3573 devicesXose Vazquez Perez1-0/+30
taken from Ralink linux and windows drivers: 0x1b75, 0x7733 AirLive 450Mbps Wireless-N Dual Band USB Adapter 0x0b05, 0x17bc ASUS USB-N66 450Mbps Dual Band USB Adapter 0x0b05, 0x17ad ASUS USB-N66 Dual Band N Network Adapter 0x050d, 0x1103 Belkin Wireless Adapter 0x148f, 0xf301 Cameo Ralink3573 3x3 single band USB dongle 0x7392, 0x7733 Edimax 0x0e66, 0x0020 Hawking HD45U Dual Band USB Wireless-N Adapter 0x0e66, 0x0021 Hawking HD45U Dual Band Wls-450N Adapter 0x04bb, 0x094e I-O DATA WN-AG450U Wireless LAN Adapter 0x0789, 0x016b Logitec LAN-W450AN/U2 0x0846, 0x9012 NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter 0x0846, 0x9019 NETGEAR WNDA4200D Wireless Dual Band USB Adapter 0x2019, 0xed19 Planex GW-USDual450 0x148f, 0x3573 Ralink 802.11n USB Wireless LAN Card 0x0df6, 0x0067 Sitecom Wireless Dualband Network Adapter N750 X6 0x0df6, 0x006a Sitecom Wireless Dualband Network Adapter N900 X7 0x0586, 0x3421 ZyXEL Dual-Band Wireless N450 USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24ath9k: Fix diversity combining for AR9285Sujith Manoharan7-20/+30
When antenna diversity combining is enabled in the EEPROM, the initial values for the MAIN/ALT config have to be programmed correctly. This patch adds it for AR9285. Since the diversity combining macros are common to all chip families, remove the redundant AR9285 macros and move the definitions to phy.h. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: modify mwifiex_ap_sta_limits to advertise support for P2PAvinash Patil1-1/+3
We support maximum simultaneous 2 non-AP station interfaces and they can assume role of Station/P2P client/P2P GO. Advertise this support to cfg80211 so that concurrent P2P/STA operation is possible. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove duplicate structure host_cmd_tlvAmitkumar Karwar4-87/+91
We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correction in mwifiex_check_fw_status() return statusAmitkumar Karwar1-2/+0
For PCIe cards, when wrong firmware is downloaded, firmware is failed to be ready in 10 seconds. We should return an error at this point. But currently we are sending first command to firmware. As expected firmware doesn't respond to this command and command timeout occurs. This patch fixes the problem by removing unnecessary 'ret' variable modifications in "if (ret) {" block. The block is just supposed to update "adapter->winner" flag. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: replace mdelay with msleepAmitkumar Karwar2-2/+2
It is observed that when wrong firmware is downloaded for PCIe card, system hangs for 10 seconds. The reason is mdelay() is used when firmware status is polled. Replace mdelay with msleep(non-blocking API) to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: reduce firmware poll retriesAmitkumar Karwar2-4/+0
After downloading the firmware, firmware status is checked by reading a register. Polling interval is 100 msecs. Therefore 100 retries means the status is checked for 10 secs which is more than sufficient for firmware to get ready. This patch removes 1000 retries macro usage, because 100secs time is not practical. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add unregister_dev handler for usb interfaceAmitkumar Karwar1-0/+8
Clear the data pointer stored in USB interface structure in this handler. This helps to return from mwifiex_usb_disconnect() if driver deinitialization is already performed while handling an error path for mwifiex_usb_probe(). USB8797 card gets enumerated twice. First enumeration is for firmware download and second enumeration expects firmware initialization. mwifiex_usb_probe() always takes care of deinitialization for first enumeration after firmware download. Also, this change matches our handling for SDIO and PCIe interfaces. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: move if_ops.cleanup_if() callAmitkumar Karwar2-3/+3
As if_ops.init_if() is called in mwifiex_register(), corresponding cleanup routine should be called in mwifiex_unregister(). Currently it's there in mwifiex_adapter_cleanup(), hence interface specific cleanup is not performed if driver initialization is failed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove unnecessary del_timer(cmd_timer)Amitkumar Karwar1-2/+0
It is already there in mwifiex_unregister(). So unnecessary call in mwifiex_adapter_cleanup() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: move del_timer_sync(scan_delay_timer) call to fix memleakAmitkumar Karwar2-7/+1
Currently it is in mwifiex_adapter_cleanup() which doesn't get called if driver initialization is failed causing memory leak. scan_delay_timer is initialized in mwifiex_register(), so it should be deleted in mwifiex_unregister(). Hence it has been moved to appropriate place. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add PCIe shutdown handler to avoid system hang on rebootAmitkumar Karwar1-0/+9
If reboot command is issued when device is in connected state, system hangs while booting. This issue is fixed by doing cleanup in shutdown handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correct max IE length check for WPS IEAvinash Patil1-5/+6
This patch is bug fix for an invalid boundry check for WPS IE. We should check max IE length against defined macro; instead we were checking it against size of pointer. Fix it. Also move IE length check before allocation of memory. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: support to send deauth for P2P clientStone Piao1-0/+1
During P2P handshake, P2P client needs to send deauth after EAPOL FAILURE to GO. We need add bss mode for P2P client when handle deauth request. Without this change, deauth can not be sent out from P2P client side. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: skip registering mgmt frame that has already registeredStone Piao1-6/+10
Before sending command to firmware, we need to check the frame type. We skip registering the mgmt frame that has already been registered. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: discard deauth and disassoc event during WPS sessionStone Piao1-0/+10
Some GO will send deauth or disassoc packet at the end of WPS handshake, which causes P2P connecion failure due to the race condition between event path and data path. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add tx info to skb when forming mgmt frameHuawei Yang1-0/+5
In function 'mwifiex_write_data_complete' it need tx info to find the mwifiex_private to updates statistics and wake up tx queues. Or we may trigger tx queues timeout when transmitting lots of mgmt frames. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: delete AP TX queues when bridged packets reach thresholdAvinash Patil4-2/+69
Delete packets from TX queues for this mwifiex_private structure when bridged packet count reaches maximum threshold. Bridged packets from each RA List are deleted till they fall to low threshold of 128. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: maintain outstanding packet count for RA list instead of packet sizeAvinash Patil3-7/+7
Maintain total outstanding packet count for RA list instead of total outstanding size as packet count metric seems more reasonable for checking threshold etc. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: rename pkt_count to ba_pkt_count in mwifiex_ra_list_tbl structAvinash Patil2-5/+5
pkt_count is used to determine if BA can be formed on this RA list by comparing it with randomly generated BA threshold. The pkt_count variable name here is ambiguous and does not reflect its usage correctly. Rename it to ba_pkt_count. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove stop_net_dev_queue operation in AP forwardingHuawei Yang1-4/+0
Under uAP mode mwifiex may stop all net tx queues on forwarding packets. This may stop some tx queues and they never have chance to be waked up. There is also no need to check tx_pending and stop queues here. Because local host has such kind of check when transmitting packets and it's not proper to have forwarding affect local transmitting. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Reviewed-by: Avinash Patil <patila@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24iwl3945: better skb management in rx pathEric Dumazet1-12/+19
Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: drop -Werror compiler flagVladimir Kondratiev1-3/+0
In production code, don't use -Werror, as it causes random compilation failures due to compiler version and options used. With every new version of gcc, it becomes stricter and report more warnings. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23MAINTAINERS: update ath6kl git locationKalle Valo1-1/+1
The git tree is in github.com nowadays. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23MAINTAINERS: add ath10kKalle Valo1-0/+8
I forgot to add an entry to MAINTAINERS when submitting the driver. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: Enable TCP/UDP checksum HW offloadKirshenbaum Erez4-3/+101
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: fix error path in wil_tx_vringVladimir Kondratiev1-3/+4
Release fragments in the order of allocation; including one for skb head Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23cw1200: Fix incorrect endianness annotation in a header fieldSolomon Peachy1-1/+1
Note that the driver doesn't directly use this field, but it should be correctly defined in any case. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Release the RF bus after setting board valuesSujith Manoharan1-9/+8
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Program correct initvals for FCCSujith Manoharan1-1/+17
* CUS217 specific initvals have to be programmed. * iniAdditional is not used for AR9462/AR9565, remove it. * Handle channel 2484 for regulatory compliance. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Use correct channel when switching bandsSujith Manoharan1-1/+2
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Fix FastChannelChange for AR9462/AR9565Sujith Manoharan1-18/+27
Right now, even though these chips support cross-band FCC, the code is non-functional since we bail out early if the channelFlags differ. Fix this so that cross-band FCC works for cards that support this feature. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Add a HW flag for FCCSujith Manoharan2-0/+8
Fast Channel Change across 2G/5G bands is supported only by AR9462 and AR9565. Add a HW capability field to indicate this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Move INI overrides to ar9003_hw_override_iniSujith Manoharan1-17/+16
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23brcmsmac: Further reduce log spam from tx phy messagesJohn Greene2-5/+5
Relegate 2 phy messages to debug status as they create excessive log spam, noted in multiple bugzillas for brcmsmac v3.8 and up. This is a follow on to net-next 99e94940697adec4f84758adb2db71f4a82c7ba5: brcmsmac: Reduce log spam in heavy tx, make err print in debug brcmsmac bcma0:0: phyerr 0x10, rate 0x14 brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10) Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-10 11:58:55 +0300