summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-03-02xfs: Non-blocking inode locking in IO completionDave Chinner1-37/+56
The introduction of barriers to loop devices has created a new IO order completion dependency that XFS does not handle. The loop device implements barriers using fsync and so turns a log IO in the XFS filesystem on the loop device into a data IO in the backing filesystem. That is, the completion of log IOs in the loop filesystem are now dependent on completion of data IO in the backing filesystem. This can cause deadlocks when a flush daemon issues a log force with an inode locked because the IO completion of IO on the inode is blocked by the inode lock. This in turn prevents further data IO completion from occuring on all XFS filesystems on that CPU (due to the shared nature of the completion queues). This then prevents the log IO from completing because the log is waiting for data IO completion as well. The fix for this new completion order dependency issue is to make the IO completion inode locking non-blocking. If the inode lock can't be grabbed, simply requeue the IO completion back to the work queue so that it can be processed later. This prevents the completion queue from being blocked and allows data IO completion on other inodes to proceed, hence avoiding completion order dependent deadlocks. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: implement optimized fdatasyncChristoph Hellwig4-13/+25
Allow us to track the difference between timestamp and size updates by using mark_inode_dirty from the I/O completion code, and checking the VFS inode flags in xfs_file_fsync. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: remove wrapper for the fsync file operationChristoph Hellwig3-131/+117
Currently the fsync file operation is divided into a low-level routine doing all the work and one that implements the Linux file operation and does minimal argument wrapping. This is a leftover from the days of the vnode operations layer and can be removed to simplify the code a bit, as well as preparing for the implementation of an optimized fdatasync which needs to look at the Linux inode state. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: remove wrappers for read/write file operationsChristoph Hellwig1-171/+114
Currently the aio_read, aio_write, splice_read and splice_write file operations are divided into a low-level routine doing all the work and one that implements the Linux file operations and does minimal argument wrapping. This is a leftover from the days of the vnode operations layer and can be removed to simplify the code a lot. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: merge xfs_lrw.c into xfs_file.cChristoph Hellwig5-809/+743
Currently the code to implement the file operations is split over two small files. Merge the content of xfs_lrw.c into xfs_file.c to have it in one place. Note that I haven't done various cleanups that are possible after this yet, they will follow in the next patch. Also the function xfs_dev_is_read_only which was in xfs_lrw.c before really doesn't fit in here at all and was moved to xfs_mount.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: fix dquota trace formatChristoph Hellwig1-5/+5
The be32_to_cpu in the TP_printk output breaks automatic parsing of the trace format by the trace-cmd tools, so we have to move it into the TP_assign block. While we're at it also fix the format for the quota limits to more regular and easier parseable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-02xfs: increase readdir buffer sizeEric Sandeen1-2/+2
While doing some testing of readdir perf a while back, I noticed that the buffer size we're using internally is smaller than what glibc gives us by default. Upping this size helped a bit, and seems safe. glibc's __alloc_dir() does: const size_t default_allocation = (4 * BUFSIZ < sizeof (struct dirent64) ? sizeof (struct dirent64) : 4 * BUFSIZ); const size_t small_allocation = (BUFSIZ < sizeof (struct dirent64) ? sizeof (struct dirent64) : BUFSIZ); size_t allocation = default_allocation; #ifdef _STATBUF_ST_BLKSIZE if (statp != NULL && default_allocation < statp->st_blksize) allocation = statp->st_blksize; #endif and #define _G_BUFSIZ 8192 #define _IO_BUFSIZ _G_BUFSIZ # define BUFSIZ _IO_BUFSIZ so the default buffer is 4 * 8192 = 32768 (except in the unlikely case of blocks > 32k....) Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-26Merge branch 'linux-2.6.33'Alex Elder1237-10826/+29011
2010-02-24Linux 2.6.33v2.6.33Linus Torvalds1-1/+1
2010-02-24Merge branch 'urgent' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Set PCI CLS early in boot.
2010-02-24Merge branch 'release' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix broken sn2 build
2010-02-24parisc: Set PCI CLS early in boot.Carlos O'Donell1-2/+5
Set the PCI CLS early in the boot process to prevent device failures. In pcibios_set_master use the new pci_cache_line_size instead of a hard-coded value. Signed-off-by: Carlos O'Donell <carlos@codesourcery.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Kyle McMartin <kyle@redhat.com>
2010-02-24Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds2-20/+9
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix out_le32() macro microblaze: Fix cache loop function for cache range
2010-02-24Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2-12/+3
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "block: improve queue_should_plug() by looking at IO depths"
2010-02-24microblaze: Fix out_le32() macroSteven J. Magnani1-1/+1
Trailing semicolon causes compilation involving out_le32() to fail. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24microblaze: Fix cache loop function for cache rangeMichal Simek1-19/+8
I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds11-18/+57
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: bug fix for vlan + gro issue tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit) IPv6: better document max_addresses parameter MAINTAINERS: update mv643xx_eth maintenance status e1000: Fix DMA mapping error handling on RX iwlwifi: sanity check before counting number of tfds can be free iwlwifi: error checking for number of tfds in queue iwlwifi: set HT flags after channel in rxon
2010-02-24net: bug fix for vlan + gro issueAjit Khaparde1-1/+1
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-24Merge branch 'release' of ↵Linus Torvalds3-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Be in TS_POLLING state during mwait based C-state entry ACPI: Fix regression where _PPC is not read at boot even when ignore_ppc=0 acer-wmi: Respect current backlight level when loading
2010-02-24Merge branch 'drm-linus' of ↵Linus Torvalds5-76/+210
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring. drm/nv50: fix vram ptes on IGPs to point at stolen system memory drm/nv50: fix instmem binding on IGPs to point at stolen system memory drm/nv50: improve vram page table construction drm/nv50: more efficient clearing of gpu page table entries drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram drm/nouveau: Fix up pre-nv17 analog load detection.
2010-02-24[IA64] Fix broken sn2 buildHedi Berriche1-1/+1
Revert the change made to arch/ia64/sn/kernel/setup.c by commit 204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 as it breaks the build. Fixing the build the b94b08081fcecf83fa690d6c5664f6316fe72208 way breaks xpc because genksyms then fails to generate an CRC for per_cpu____sn_cnodeid_to_nasid because of limitations in the generic genksyms code. Signed-off-by: Hedi Berriche <hedi@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-23Merge branch 'master' of ↵David S. Miller5-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-23tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ONAtsushi Nemoto1-1/+0
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)Torgny Johansson1-0/+5
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23IPv6: better document max_addresses parameterBrian Haley1-4/+4
Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23MAINTAINERS: update mv643xx_eth maintenance statusLennert Buytenhek1-2/+2
I am no longer with Marvell. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: Fix DMA mapping error handling on RXAnton Blanchard1-1/+18
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23Revert "block: improve queue_should_plug() by looking at IO depths"Jens Axboe2-12/+3
This reverts commit fb1e75389bd06fd5987e9cda1b4e0305c782f854. "Benjamin S." <sbenni@gmx.de> reports that the patch in question causes a big drop in sequential throughput for him, dropping from 200MB/sec down to only 70MB/sec. Needs to be investigated more fully, for now lets just revert the offending commit. Conflicts: include/linux/blkdev.h Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-23drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.Thomas Hellstrom1-16/+92
Intercept query commands and apply relocations to their guest pointers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linusDave Airlie4-60/+118
* 'nouveau/for-airlied' of ../drm-nouveau-next: drm/nv50: fix vram ptes on IGPs to point at stolen system memory drm/nv50: fix instmem binding on IGPs to point at stolen system memory drm/nv50: improve vram page table construction drm/nv50: more efficient clearing of gpu page table entries drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram drm/nouveau: Fix up pre-nv17 analog load detection.
2010-02-23Merge branch 'pcc' into releaseLen Brown1-1/+5
2010-02-23Merge branches 'bugzilla-14207' and 'idle' into releaseLen Brown2-13/+17
2010-02-23Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2-0/+9
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: BCM47xx: Fix 128MB RAM support MIPS: Highmem: Fix build error
2010-02-23Merge branch 'parisc/tracehook' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'parisc/tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: Revert "parisc: HAVE_ARCH_TRACEHOOK"
2010-02-23fs/exec.c: fix initial stack reservationMichael Neuling1-1/+0
803bf5ec259941936262d10ecc84511b76a20921 ("fs/exec.c: restrict initial stack space expansion to rlimit") attempts to limit the initial stack to 20*PAGE_SIZE. Unfortunately, in attempting ensure the stack is not reduced in size, we ended up not changing the stack at all. This size reduction check is not necessary as the expand_stack call does this already. This caused a regression in UML resulting in most guest processes being killed. Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jouni Malinen <j@w1.fi> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23efifb: fix framebuffer handoffMarcin Slusarz1-1/+10
Commit 4410f3910947dcea8672280b3adecd53cec4e85e ("fbdev: add support for handoff from firmware to hw framebuffers") didn't add fb_destroy operation to efifb. Fix it and change aperture_size to match size passed to request_mem_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15151 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reported-by: Alex Zhavnerchik <alex.vizor@gmail.com> Tested-by: Alex Zhavnerchik <alex.vizor@gmail.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23geode-mfgpt: restore previous behavior for selecting IRQJens Rottmann1-1/+1
geode-mfgpt: restore previous behavior for selecting IRQ The MFGPT IRQ used to be, in order of decreasing priority, * IRQ supplied by the user as a boot-time parameter, * IRQ previously set by the BIOS or another driver, * default IRQ given at compile time. Return to this behavior, which got broken when splitting the MFGPT/clocksource driver for 2.6.33-rc1. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23idr: fix a critical misallocation bug, take#2Tejun Heo1-1/+3
This is retry of reverted 859ddf09743a8cc680af33f7259ccd0fd36bfe9d ("idr: fix a critical misallocation bug") which contained two bugs. * pa[idp->layers] should be cleared even if it's not used by sub_alloc() because it's used by mark idr_mark_full(). * The original condition check also assigned pa[l] to p which the new code didn't do thus leaving p pointing at the wrong layer. Both problems have been fixed and the idr code has received good amount testing using userland testing setup where simple bitmap allocator is run parallel to verify the result of idr allocation. The bug this patch fixes is caused by sub_alloc() optimization path bypassing out-of-room condition check and restarting allocation loop with starting value higher than maximum allowed value. For detailed description, please read commit message of 859ddf09. Signed-off-by: Tejun Heo <tj@kernel.org> Based-on-patch-from: Eric Paris <eparis@redhat.com> Reported-by: Eric Paris <eparis@redhat.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23kernel/sys.c: fix missing rcu protection for sys_getpriority()Tetsuo Handa1-0/+2
find_task_by_vpid() is not safe without rcu_read_lock(). 2.6.33-rc7 got RCU protection for sys_setpriority() but missed it for sys_getpriority(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23memcg: fix oom killing a child process in an other cgroupKAMEZAWA Hiroyuki1-0/+2
Presently the oom-killer is memcg aware and it finds the worst process from processes under memcg(s) in oom. Then, it kills victim's child first. It may kill a child in another cgroup and may not be any help for recovery. And it will break the assumption users have. This patch fixes it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-23drm/nv50: fix vram ptes on IGPs to point at stolen system memoryBen Skeggs1-1/+7
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: fix instmem binding on IGPs to point at stolen system memoryBen Skeggs2-18/+41
This also modifies the unused PRAMIN PT entries to be all zeroes, can't really recall why I used 9/0 initially, just that it didn't work for some reason. It was likely masking a bug elsewhere that's since been fixed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: improve vram page table constructionBen Skeggs1-11/+33
This commit changes nouveau to construct PTEs which look very much like the ones the binary driver creates. I presume that filling multiple PTEs identically with length flags and the physical address of the start of a block of VRAM is a hint to the memory controller that it need not perform additional page table lookups for that range of addresses. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: more efficient clearing of gpu page table entriesBen Skeggs1-24/+44
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vramBen Skeggs1-30/+13
GART is handled elsewhere, no reason to have the code for it here too. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nouveau: Fix up pre-nv17 analog load detection.Francisco Jerez1-1/+5
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-22MIPS: BCM47xx: Fix 128MB RAM supportHauke Mehrtens1-0/+8
Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the DDR address space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-22MIPS: Highmem: Fix build errorYoichi Yuasa1-0/+1
arch/mips/mm/highmem.c: In function 'kmap_init': arch/mips/mm/highmem.c:130: error: 'init_mm' undeclared (first use in this function) arch/mips/mm/highmem.c:130: error: (Each undeclared identifier is reported only once arch/mips/mm/highmem.c:130: error: for each function it appears in.) Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/980/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-22Revert "parisc: HAVE_ARCH_TRACEHOOK"Roland McGrath1-1/+0
This reverts commit 81bf550d9cdfe0325eb1504b06c9f6511b442c1a. HAVE_ARCH_TRACEHOOK requires defining the user_regset interfaces, including task_user_regset_view(). parisc doesn't do that yet, so don't lie about it. Signed-off-by: Roland McGrath <roland@redhat.com>
2010-02-22ACPI: Be in TS_POLLING state during mwait based C-state entryPallipadi, Venkatesh1-12/+16
ACPI deep C-state entry had a long standing bug/missing feature, wherein we were sending resched IPIs when an idle CPU is in mwait based deep C-state. Only mwait based C1 was using the write to the monitored address to wake up mwait'ing CPU. This patch changes the code to retain TS_POLLING bit if we are entering an mwait based deep C-state. The patch has been verified to reduce the number of resched IPIs in general and also improves the performance/power on workloads with low system utilization (i.e., when mwait based deep C-states are being used). Fixes "netperf ~50% regression with 2.6.33-rc1, bisect to 1b9508f" http://marc.info/?l=linux-kernel&m=126441481427331&w=4 Reported-by: Lin Ming <ming.m.lin@intel.com> Tested-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 04:23:32 +0300