summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-04-13r6040: update copyright from 2007 to nowFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: define and use bits of register PHY_CCFlorian Fainelli1-2/+10
Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: define and use MTPR transmit enable bitFlorian Fainelli1-2/+3
Define MTPR bit 0 of the register and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: define and use MLSR register bitsFlorian Fainelli1-2/+5
Define the MLSR (MAC Last Status Register bits) for: - tx fifo under-run - tx exceed collision - tx late collision Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: fix typo on stats update in tx pathFlorian Fainelli1-1/+1
We are currently updating the rx fifo error counter in the tx path while it should have been the tx fifo error counter, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: add a MAC operation timeout defineFlorian Fainelli1-3/+5
2048 is the usual value for busy-waiting on a register r/w, define it as MAC_DEF_TIMEOUT and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: remove unused variable mcr1 from private structureFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13r6040: consolidate MAC reset to its own functionFlorian Fainelli1-19/+18
The reset of the MAC is currently done identically from two places and one place is not waiting for the MAC_SM bit to be set after reset. Everytime the MAC is software resetted a state machine is also needed so consolidate the reset to its own function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13ixp4xx_eth: Fix up the get_ts_info ethtool method.Richard Cochran1-2/+2
Commit e77bd1ec121ee4163a6b42a44e87b2e382c39e04 added support for a new ethtool function, but that cannot compile due to a misnamed global variable. Not that it really matters (since the IXP4xx does compile either, as of about Linux 3.1) but just in case, this patch fixes the misnamed variable in the PHC driver. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12Treat ND option 31 as userland (DNSSL support)Alexey I. Froloff2-1/+4
As specified in RFC6106, DNSSL option contains one or more domain names of DNS suffixes. 8-bit identifier of the DNSSL option type as assigned by the IANA is 31. This option should also be treated as userland. Signed-off-by: Alexey I. Froloff <raorn@raorn.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12wiznet: Add missing #include <linux/irq.h>Geert Uytterhoeven2-0/+2
m68k/allmodconfig: drivers/net/ethernet/wiznet/w5100.c: In function ‘w5100_hw_probe’: drivers/net/ethernet/wiznet/w5100.c:680: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) drivers/net/ethernet/wiznet/w5300.c: In function ‘w5300_hw_probe’: drivers/net/ethernet/wiznet/w5300.c:594: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) Include <linux/irq.h>, which provides the declaration for IRQ_TYPE_LEVEL_LOW. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12drivers/net: Remove CONFIG_WIZNET_TX_FLOW optionMike Sinkovsky3-17/+5
This option was there for debugging race conditions, just remove it, and assume TX_FLOW is always enabled. Signed-off-by: Mike Sinkovsky <msink@permonline.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add missed "statics"Jiri Pirko3-5/+5
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: ab: walk through port list non-rcuJiri Pirko1-1/+1
Since team->lock is being held, _rcu variant make no sense. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add user_linkup and user_linkup_enabled per-port optionJiri Pirko2-17/+81
Allows userspace to setup linkup for ports. Default is to take linkup directly from ethtool state. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add bool option typeJiri Pirko2-11/+31
Add another (hopefully last) option type. Use NLA_FLAG to implement that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add support for per-port optionsJiri Pirko4-100/+278
This patch allows to create per-port options. That becomes handy for all sorts of stuff, for example for userspace driven link-state, 802.3ad implementation and so on. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11batman-adv: add bridge loop avoidance compile optionSimon Wunderlich7-5/+89
The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: form groups in the bridge loop avoidanceSimon Wunderlich2-6/+116
backbone gateways may be part of the same LAN, but participate in different meshes. With this patch, backbone gateways form groups by applying the groupid of another backbone gateway if it is higher. After forming the group, they only accept messages from backbone gateways of the same group. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: drop STP over batmanSimon Wunderlich1-0/+8
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: add broadcast duplicate checkSimon Wunderlich5-0/+91
When multiple backbone gateways relay the same broadcast from the backbone into the mesh, other nodes in the mesh may receive this broadcast multiple times. To avoid this, the crc checksums of received broadcasts are recorded and new broadcast packets with the same content may be dropped if received by another gateway. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: don't let backbone gateways exchange tt entriesSimon Wunderlich4-2/+74
As the backbone gateways are connected to the same backbone, they should announce the same clients on the backbone non-exclusively. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: allow multiple entries in tt_global_entriesSimon Wunderlich2-93/+311
as backbone gateways will all independently announce the same clients, also the tt global table must be able to hold multiple originators per client entry. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: export claim tables through debugfsSimon Wunderlich4-3/+66
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: make bridge loop avoidance switchableSimon Wunderlich2-0/+11
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: add basic bridge loop avoidance codeSimon Wunderlich14-16/+1430
This second version of the bridge loop avoidance for batman-adv avoids loops between the mesh and a backbone (usually a LAN). By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. With this patch, batman recognizes backbone gateways, nodes which are part of the mesh and backbone/LAN at the same time. Each backbone gateway "claims" clients from within the mesh to handle them exclusively. By restricting that only responsible backbone gateways may handle their claimed clients traffic, loops are effectively avoided. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: remove old bridge loop avoidance codeSimon Wunderlich9-517/+5
The functionality is to be replaced by an improved implementation, so first clean up. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: encourage batman to take shorter routes by changing the default ↵Marek Lindner1-1/+1
hop penalty Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: Remove declaration of only locally used functionsSven Eckelmann2-16/+14
Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: Replace bitarray operations with bitmapSven Eckelmann6-130/+41
bitarray.c consists mostly of functionality that is already available as part of the standard kernel API. batman-adv could use architecture optimized code and reduce the binary size by switching to the standard functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11batman-adv: use ETH_ALEN instead of hardcoded numeric constantsAntonio Quartulli1-13/+13
In packet.h the numeric constant 6 is used instead of the more portable ETH_ALEN define. This patch substitute any hardcoded value with such define. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Sven Eckelmann <sven@narfation.org>
2012-04-11batman-adv: clean up KconfigAntonio Quartulli1-9/+8
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11MAINTAINERS: add additional maintainer for net/batman-advAntonio Quartulli1-0/+1
Add myself as maintainer for net/batman-adv as announced by Marek Linder Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4047-49867/+103952
2012-04-10wiznet: Fix Kconfig dependencies.David S. Miller1-0/+4
Both drivers need to depend upon HAS_IOMEM, otherwise we get a build failure on platforms like S390. All the driver specific config options need to depend upon the drivers themselves. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07fealnx: Remove unused local label 'out' in netdev_open().David S. Miller1-1/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07ipw2100: remove useless tests in the PCI device remove path.Francois Romieu1-30/+26
Everything has been set up in the PCI probe function. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07ipw2100: stop using net_device.base_addr.Francois Romieu2-39/+39
No net_device.irq removal yet. The driver probe, remove and failure paths need some care beforehand. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07ipw2200: stop using net_device.{base_addr, irq}.Francois Romieu1-4/+0
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07rrunner: stop using net_device.{base_addr, irq}.Francois Romieu1-47/+35
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07myri10ge: stop using net_device.{base_addr, irq}.Francois Romieu1-5/+2
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jon Mason <mason@myri.com> Acked-by: Andrew Gallatin <gallatin@myri.com>
2012-04-07sis900: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu1-174/+201
- pci_resource_start() can be removed from sis900_get_mac_addr() because the IO range is maped and stored into the device private struct early in the device probe function. - the driver contains a few direct accesses to low IO ports that forbid to re(#)define the usual out{l, w, b} macros. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Daniele Venzano <venza@brownhat.org>
2012-04-07dmfe: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu1-142/+153
This is a pure PCI driver, no ISA here. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07epic100: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu1-202/+201
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07uli526x: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu1-195/+202
The bulk of the patch comes from the __iomem changes. - the phy read and write operations were carrying the chip id deep down the call chain. Let's waste a pointer and contain the flying spaghetti monster. - phy_{read, write}_1bit only need to access the DCR9 register. The loss of generality here should not hurt. - removed a leftover printk of the EISA era. This is a pure PCI device. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07dl2k: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu2-226/+209
The eeprom registers always use the same PCI bar whereas the general registers may either use the same mapping as the eeprom registers or a different one. It is thus possible to simplify parse_eeprom(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-078139too: dev->{base_addr, irq} removal.Francois Romieu1-80/+56
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07natsemi: stop using net_device.{base_addr, irq}.Francois Romieu1-28/+39
It's useless to check mem_start on a newly allocated device. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tim Hockin <thockin@hockin.org>
2012-04-07smsc9420: stop using net_device.{base_addr, irq}.Francois Romieu1-24/+23
The device private data pointer can not be NULL in smsc9420_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Steve Glendinning <steve.glendinning@smsc.com>
2012-04-07de2104x: stop using net_device.{base_addr, irq}.Francois Romieu1-18/+16
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 20:42:38 +0300