summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14Linux 4.19.221v4.19.221Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20211213092930.763200615@linuxfoundation.org Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: sched: make function qdisc_free_cb() staticWei Yongjun1-1/+1
commit 5362700c942b2cc4bab328361545a6d6fe649534 upstream. Fixes the following sparse warning: net/sched/sch_generic.c:944:6: warning: symbol 'qdisc_free_cb' was not declared. Should it be static? Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net_sched: fix a crash in tc_new_tfilter()Cong Wang1-1/+3
commit 460b360104d51552a57f39e54b2589c9fd7fa0b3 upstream. When tcf_block_find() fails, it already rollbacks the qdisc refcnt, so its caller doesn't need to clean up this again. Avoid calling qdisc_put() again by resetting qdisc to NULL for callers. Reported-by: syzbot+37b8770e6d5a8220a039@syzkaller.appspotmail.com Fixes: e368fdb61d8e ("net: sched: use Qdisc rcu API instead of relying on rtnl lock") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip: nvic: Fix offset for Interrupt Priority OffsetsVladimir Murzin1-1/+1
commit c5e0cbe2858d278a27d5b3fe31890aea5be064c4 upstream. According to ARM(v7M) ARM Interrupt Priority Offsets located at 0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only Interrupt Active Bit Registers Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALLWudi Wang1-1/+1
commit b383a42ca523ce54bcbd63f7c8f3cf974abc9b9a upstream. INVALL CMD specifies that the ITS must ensure any caching associated with the interrupt collection defined by ICID is consistent with the LPI configuration tables held in memory for all Redistributors. SYNC is required to ensure that INVALL is executed. Currently, LPI configuration data may be inconsistent with that in the memory within a short period of time after the INVALL command is executed. Signed-off-by: Wudi Wang <wangwudi@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/armada-370-xp: Fix support for Multi-MSI interruptsPali Rohár1-9/+5
commit d0a553502efd545c1ce3fd08fc4d423f8e4ac3d6 upstream. irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into msi_domain_info structure. But allocated interrupt numbers for Multi-MSI needs to be properly aligned otherwise devices send MSI interrupt with wrong number. Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area() to allocate aligned interrupt numbers. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()Pali Rohár1-1/+1
commit ce20eff57361e72878a772ef08b5239d3ae102b6 upstream. IRQ domain alloc function should return zero on success. Non-zero value indicates failure. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: fcc392d501bd ("irqchip/armada-370-xp: Use the generic MSI infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: accel: kxcjk-1013: Fix possible memory leak in probe and removeYang Yingliang1-3/+2
commit 70c9774e180d151abaab358108e3510a8e615215 upstream. When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a25691c1f967 ("iio: accel: kxcjk1013: allow using an external trigger") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: <Stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211025124159.2700301-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: adc: axp20x_adc: fix charging current reporting on AXP22xEvgeny Boger1-15/+3
commit 92beafb76a31bdc02649eb44e93a8e4f4cfcdbe8 upstream. Both the charging and discharging currents on AXP22x are stored as 12-bit integers, in accordance with the datasheet. It's also confirmed by vendor BSP (axp20x_adc.c:axp22_icharge_to_mA). The scale factor of 0.5 is never mentioned in datasheet, nor in the vendor source code. I think it was here to compensate for erroneous addition bit in register width. Tested on custom A40i+AXP221s board with external ammeter as a reference. Fixes: 0e34d5de961d ("iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs") Signed-off-by: Evgeny Boger <boger@wirenboard.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20211116213746.264378-1-boger@wirenboard.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: at91-sama5d2: Fix incorrect sign extensionGwendal Grignou1-1/+2
commit 652e7df485c6884d552085ae2c73efa6cfea3547 upstream. Use scan_type when processing raw data which also fixes that the sign extension was from the wrong bit. Use channel definition as root of trust and replace constant when reading elements directly using the raw sysfs attributes. Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: dln2: Check return value of devm_iio_trigger_register()Lars-Peter Clausen1-1/+5
commit 90751fb9f224e0e1555b49a8aa9e68f6537e4cec upstream. Registering a trigger can fail and the return value of devm_iio_trigger_register() must be checked. Otherwise undefined behavior can occur when the trigger is used. Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101133043.6974-1-lars@metafoo.de Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: dln2-adc: Fix lockdep complaintNoralf Trønnes1-8/+7
commit 59f92868176f191eefde70d284bdfc1ed76a84bc upstream. When reading the voltage: $ cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw Lockdep complains: [ 153.910616] ====================================================== [ 153.916918] WARNING: possible circular locking dependency detected [ 153.923221] 5.14.0+ #5 Not tainted [ 153.926692] ------------------------------------------------------ [ 153.932992] cat/717 is trying to acquire lock: [ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44 [ 153.946541] but task is already holding lock: [ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc] [ 153.961152] which lock already depends on the new lock. Fix this by not calling into the iio core underneath the dln2->mutex lock. Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Cc: Jack Andersen <jackoalan@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: itg3200: Call iio_trigger_notify_done() on errorLars-Peter Clausen1-1/+1
commit 67fe29583e72b2103abb661bb58036e3c1f00277 upstream. IIO trigger handlers must call iio_trigger_notify_done() when done. This must be done even when an error occurred. Otherwise the trigger will be seen as busy indefinitely and the trigger handler will never be called again. The itg3200 driver neglects to call iio_trigger_notify_done() when there is an error reading the gyro data. Fix this by making sure that iio_trigger_notify_done() is included in the error exit path. Fixes: 9dbf091da080 ("iio: gyro: Add itg3200") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101144055.13858-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: kxsd9: Don't return error code in trigger handlerLars-Peter Clausen1-3/+3
commit 45febe0d63917ee908198c5be08511c64ee1790a upstream. IIO trigger handlers need to return one of the irqreturn_t values. Returning an error code is not supported. The kxsd9 interrupt handler returns an error code if reading the data registers fails. In addition when exiting due to an error the trigger handler does not call `iio_trigger_notify_done()`. Which when not done keeps the triggered disabled forever. Modify the code so that the function returns a valid irqreturn_t value as well as calling `iio_trigger_notify_done()` on all exit paths. Since we can't return the error code make sure to at least log it as part of the error message. Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211024171251.22896-2-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: ltr501: Don't return error code in trigger handlerLars-Peter Clausen1-1/+1
commit ef9d67fa72c1b149a420587e435a3e888bdbf74f upstream. IIO trigger handlers need to return one of the irqreturn_t values. Returning an error code is not supported. The ltr501 interrupt handler gets this right for most error paths, but there is one case where it returns the error code. In addition for this particular case the trigger handler does not call `iio_trigger_notify_done()`. Which when not done keeps the triggered disabled forever. Modify the code so that the function returns a valid irqreturn_t value as well as calling `iio_trigger_notify_done()` on all exit paths. Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024171251.22896-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: mma8452: Fix trigger reference coutingLars-Peter Clausen1-1/+1
commit cd0082235783f814241a1c9483fb89e405f4f892 upstream. The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device. Fixes: ae6d9ce05691 ("iio: mma8452: Add support for interrupt driven triggers.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024092700.6844-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: stk3310: Don't return error code in interrupt handlerLars-Peter Clausen1-3/+3
commit 8e1eeca5afa7ba84d885987165dbdc5decf15413 upstream. Interrupt handlers must return one of the irqreturn_t values. Returning a error code is not supported. The stk3310 event interrupt handler returns an error code when reading the flags register fails. Fix the implementation to always return an irqreturn_t value. Fixes: 3dd477acbdd1 ("iio: light: Add threshold interrupt support for STK3310") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024171251.22896-3-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: trigger: stm32-timer: fix MODULE_ALIASAlyssa Ross1-1/+1
commit 893621e0606747c5bbefcaf2794d12c7aa6212b7 upstream. modprobe can't handle spaces in aliases. Fixes: 93fbe91b5521 ("iio: Add STM32 timer trigger driver") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/20211125182850.2645424-1-hi@alyssa.is Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: trigger: Fix reference countingLars-Peter Clausen1-1/+0
commit a827a4984664308f13599a0b26c77018176d0c7c upstream. In viio_trigger_alloc() device_initialize() is used to set the initial reference count of the trigger to 1. Then another get_device() is called on trigger. This sets the reference count to 2 before the trigger is returned. iio_trigger_free(), which is the matching API to viio_trigger_alloc(), calls put_device() which decreases the reference count by 1. But the second reference count acquired in viio_trigger_alloc() is never dropped. As a result the iio_trigger_release() function is never called and the memory associated with the trigger is never freed. Since there is no reason for the trigger to start its lifetime with two reference counts just remove the extra get_device() in viio_trigger_alloc(). Fixes: 5f9c035cae18 ("staging:iio:triggers. Add a reference get to the core for triggers.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20211024092700.6844-2-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14xhci: avoid race between disable slot command and host runtime suspendMathias Nyman3-8/+16
commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream. Make xhci_disable_slot() synchronous, thus ensuring it, and xhci_free_dev() calling it return after xHC controller completes the disable slot command. Otherwise the roothub and xHC host may runtime suspend, and clear the command ring while the disable slot command is being processed. This causes a command completion mismatch as the completion event can't be mapped to the correct command. Command ring gets out of sync and commands time out. Driver finally assumes host is unresponsive and bails out. usb 2-4: USB disconnect, device number 10 xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event ... xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:0d.0: HC died; cleaning up Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14usb: core: config: using bit mask instead of individual bitsPavel Hofman1-2/+2
commit ca5737396927afd4d57b133fd2874bbcf3421cdb upstream. Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for extracting multiple-transactions bits from wMaxPacketSize value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspendingKai-Heng Feng1-4/+0
commit 811ae81320da53a5670c36970cefacca8519f90e upstream. When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14usb: core: config: fix validation of wMaxPacketValue entriesPavel Hofman1-1/+1
commit 1a3910c80966e4a76b25ce812f6bea0ef1b1d530 upstream. The checks performed by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable. Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14USB: gadget: zero allocate endpoint 0 buffersGreg Kroah-Hartman2-2/+2
commit 86ebbc11bb3f60908a51f3e41a17e3f477c2eaa3 upstream. Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14USB: gadget: detect too-big endpoint 0 requestsGreg Kroah-Hartman3-1/+40
commit 153a2d7e3350cc89d406ba2d35be8793a64c2038 upstream. Sometimes USB hosts can ask for buffers that are too large from endpoint 0, which should not be allowed. If this happens for OUT requests, stall the endpoint, but for IN requests, trim the request size to the endpoint buffer size. Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net/qla3xxx: fix an error code in ql_adapter_up()Dan Carpenter1-10/+9
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream. The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net, neigh: clear whole pneigh_entry at alloc timeEric Dumazet1-1/+1
commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream. Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit to allow for extensions") enables a new KMSAM warning [1] I think the bug is actually older, because the following intruction only occurred if ndm->ndm_flags had NTF_PROXY set. pn->flags = ndm->ndm_flags; Let's clear all pneigh_entry fields at alloc time. [1] BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593 pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593 pneigh_dump_table net/core/neighbour.c:2715 [inline] neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832 netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:254 [inline] rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_write_iter+0x594/0x690 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] __kmalloc+0xc3c/0x12d0 mm/slub.c:4437 kmalloc include/linux/slab.h:595 [inline] pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766 arp_req_set_public net/ipv4/arp.c:1016 [inline] arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032 arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232 inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947 sock_do_ioctl net/socket.c:1118 [inline] sock_ioctl+0xa3f/0x13e0 net/socket.c:1235 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860 __x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang2-1/+4
commit b5bd95d17102b6719e3531d627875b9690371383 upstream. Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: altera: set a couple error code in probe()Dan Carpenter1-3/+6
commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream. There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zeroLee Jones1-0/+2
commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream. Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14tools build: Remove needless libpython-version feature check that breaks ↵Arnaldo Carvalho de Melo5-23/+0
test-all fast path commit 3d1d57debee2d342a47615707588b96658fabb85 upstream. Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff03d196e51: - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by: James Clark <james.clark@arm.com> Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14mtd: rawnand: fsmc: Take instruction delay into accountHerve Codina1-0/+4
commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream. The FSMC NAND controller should apply a delay after the instruction has been issued on the bus. The FSMC NAND controller driver did not handle this delay. Add this waiting delay in the FSMC NAND controller driver. Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14i40e: Fix pre-set max number of queues for VFMateusz Palczewski1-5/+0
commit 8aa55ab422d9d0d825ebfb877702ed661e96e682 upstream. After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Bindushree P <Bindushree.p@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixerSrinivas Kandagatla1-3/+5
commit 4739d88ad8e1900f809f8a5c98f3c1b65bf76220 upstream. msm_routing_put_audio_mixer() can return incorrect value in various scenarios. scenario 1: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0 return value is 0 instead of 1 eventhough value was changed scenario 2: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 return value is 1 instead of 0 eventhough the value was not changed scenario 3: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0 return value is 1 instead of 0 eventhough the value was not changed Fix this by adding checks, so that change notifications are sent correctly. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14qede: validate non LSO skb lengthManish Chopra1-0/+7
commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream. Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172d29c ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)Davidlohr Bueso1-0/+3
commit e6a59aac8a8713f335a37d762db0dbe80e7f6d38 upstream. do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent change_pid(PIDTYPE_PGID) that can move the task from one hlist to another while iterating. Serialize ioprio_get to take the tasklist_lock in this case, just like it's set counterpart. Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()) Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14tracefs: Set all files to the same group ownership as the mount optionSteven Rostedt (VMware)1-0/+72
commit 48b27b6b5191e2e1f2798cd80877b6e4ef47c351 upstream. As people have been asking to allow non-root processes to have access to the tracefs directory, it was considered best to only allow groups to have access to the directory, where it is easier to just set the tracefs file system to a specific group (as other would be too dangerous), and that way the admins could pick which processes would have access to tracefs. Unfortunately, this broke tooling on Android that expected the other bit to be set. For some special cases, for non-root tools to trace the system, tracefs would be mounted and change the permissions of the top level directory which gave access to all running tasks permission to the tracing directory. Even though this would be dangerous to do in a production environment, for testing environments this can be useful. Now with the new changes to not allow other (which is still the proper thing to do), it breaks the testing tooling. Now more code needs to be loaded on the system to change ownership of the tracing directory. The real solution is to have tracefs honor the gid=xxx option when mounting. That is, (tracing group tracing has value 1003) mount -t tracefs -o gid=1003 tracefs /sys/kernel/tracing should have it that all files in the tracing directory should be of the given group. Copy the logic from d_walk() from dcache.c and simplify it for the mount case of tracefs if gid is set. All the files in tracefs will be walked and their group will be set to the value passed in. Link: https://lkml.kernel.org/r/20211207171729.2a54e1b3@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Yabin Cui <yabinc@google.com> Fixes: 49d67e445742 ("tracefs: Have tracefs directories not set OTH permission bits by default") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14aio: fix use-after-free due to missing POLLFREE handlingEric Biggers2-32/+107
commit 50252e4b5e989ce64555c7aef7516bdefc2fea72 upstream. signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14aio: keep poll requests on waitqueue until completedEric Biggers1-20/+63
commit 363bee27e25804d8981dd1c025b4ad49dc39c530 upstream. Currently, aio_poll_wake() will always remove the poll request from the waitqueue. Then, if aio_poll_complete_work() sees that none of the polled events are ready and the request isn't cancelled, it re-adds the request to the waitqueue. (This can easily happen when polling a file that doesn't pass an event mask when waking up its waitqueue.) This is fundamentally broken for two reasons: 1. If a wakeup occurs between vfs_poll() and the request being re-added to the waitqueue, it will be missed because the request wasn't on the waitqueue at the time. Therefore, IOCB_CMD_POLL might never complete even if the polled file is ready. 2. When the request isn't on the waitqueue, there is no way to be notified that the waitqueue is being freed (which happens when its lifetime is shorter than the struct file's). This is supposed to happen via the waitqueue entries being woken up with POLLFREE. Therefore, leave the requests on the waitqueue until they are actually completed (or cancelled). To keep track of when aio_poll_complete_work needs to be scheduled, use new fields in struct poll_iocb. Remove the 'done' field which is now redundant. Note that this is consistent with how sys_poll() and eventpoll work; their wakeup functions do *not* remove the waitqueue entries. Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://lore.kernel.org/r/20211209010455.42744-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14signalfd: use wake_up_pollfree()Eric Biggers1-11/+1
commit 9537bae0da1f8d1e2361ab6d0479e8af7824e160 upstream. wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll and aio poll are fortunately not affected by this, but it's very fragile. Thus, the new function wake_up_pollfree() has been introduced. Convert signalfd to use wake_up_pollfree(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: d80e731ecab4 ("epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-4-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14binder: use wake_up_pollfree()Eric Biggers1-12/+9
commit a880b28a71e39013e357fd3adccd1d8a31bc69a8 upstream. wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll and aio poll are fortunately not affected by this, but it's very fragile. Thus, the new function wake_up_pollfree() has been introduced. Convert binder to use wake_up_pollfree(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: f5cb779ba163 ("ANDROID: binder: remove waitqueue when thread exits.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14wait: add wake_up_pollfree()Eric Biggers2-0/+33
commit 42288cb44c4b5fff7653bc392b583a2b8bd6a8c0 upstream. Several ->poll() implementations are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, using 'wake_up_poll(wq, EPOLLHUP | POLLFREE);'. However, that has a bug: wake_up_poll() calls __wake_up() with nr_exclusive=1. Therefore, if there are multiple "exclusive" waiters, and the wakeup function for the first one returns a positive value, only that one will be called. That's *not* what's needed for POLLFREE; POLLFREE is special in that it really needs to wake up everyone. Considering the three non-blocking poll systems: - io_uring poll doesn't handle POLLFREE at all, so it is broken anyway. - aio poll is unaffected, since it doesn't support exclusive waits. However, that's fragile, as someone could add this feature later. - epoll doesn't appear to be broken by this, since its wakeup function returns 0 when it sees POLLFREE. But this is fragile. Although there is a workaround (see epoll), it's better to define a function which always sends POLLFREE to all waiters. Add such a function. Also make it verify that the queue really becomes empty after all waiters have been woken up. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14libata: add horkage for ASMedia 1092Hannes Reinecke1-0/+2
commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream. The ASMedia 1092 has a configuration mode which will present a dummy device; sadly the implementation falsely claims to provide a device with 100M which doesn't actually exist. So disable this device to avoid errors during boot. Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: m_can: Disable and ignore ELO interruptBrian Silverman1-8/+6
commit f58ac1adc76b5beda43c64ef359056077df4d93a upstream. With the design of this driver, this condition is often triggered. However, the counter that this interrupt indicates an overflow is never read either, so overflowing is harmless. On my system, when a CAN bus starts flapping up and down, this locks up the whole system with lots of interrupts and printks. Specifically, this interrupt indicates the CEL field of ECR has overflowed. All reads of ECR mask out CEL. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol1-1/+1
commit 94cddf1e9227a171b27292509d59691819c458db upstream. After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov3-1/+15
commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream. The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14tracefs: Have new files inherit the ownership of their parentSteven Rostedt (VMware)1-0/+4
commit ee7f3666995d8537dec17b1d35425f28877671a9 upstream. If directories in tracefs have their ownership changed, then any new files and directories that are created under those directories should inherit the ownership of the director they are created in. Link: https://lkml.kernel.org/r/20211208075720.4855d180@gandalf.local.home Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yabin Cui <yabinc@google.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: stable@vger.kernel.org Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system") Reported-by: Kalesh Singh <kaleshsingh@google.com> Reported: https://lore.kernel.org/all/CAC_TJve8MMAv+H_NdLSJXZUSoxOEq2zB_pVaJ9p=7H6Bu3X76g@mail.gmail.com/ Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*()Takashi Iwai1-2/+9
commit 6665bb30a6b1a4a853d52557c05482ee50e71391 upstream. A couple of calls in snd_pcm_oss_change_params_locked() ignore the possible errors. Catch those errors and abort the operation for avoiding further problems. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14ALSA: pcm: oss: Limit the period size to 16MBTakashi Iwai1-1/+1
commit 8839c8c0f77ab8fc0463f4ab8b37fca3f70677c2 upstream. Set the practical limit to the period size (the fragment shift in OSS) instead of a full 31bit; a too large value could lead to the exhaust of memory as we allocate temporary buffers of the period size, too. As of this patch, we set to 16MB limit, which should cover all use cases. Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com Link: https://lore.kernel.org/r/20211201073606.11660-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14ALSA: pcm: oss: Fix negative period/buffer sizesTakashi Iwai1-9/+15
commit 9d2479c960875ca1239bcb899f386970c13d9cfe upstream. The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers. This patch changes the code to handle with ssize_t and adds the proper error checks appropriately. Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 06:41:54 +0300