summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-01Linux 4.19.219v4.19.219Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20211129181703.670197996@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01tty: hvc: replace BUG_ON() with negative return valueJuergen Gross1-3/+14
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream. Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/netfront: don't trust the backend response data blindlyJuergen Gross1-5/+75
commit a884daa61a7d91650987e855464526aef219590f upstream. Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page. Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/netfront: disentangle tx_skb_freelistJuergen Gross1-36/+25
commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream. The tx_skb_freelist elements are in a single linked list with the request id used as link reference. The per element link field is in a union with the skb pointer of an in use request. Move the link reference out of the union in order to enable a later reuse of it for requests which need a populated skb pointer. Rename add_id_to_freelist() and get_id_from_freelist() to add_id_to_list() and get_id_from_list() in order to prepare using those for other lists as well. Define ~0 as value to indicate the end of a list and place that value into the link for a request not being on the list. When freeing a skb zero the skb pointer in the request. Use a NULL value of the skb pointer instead of skb_entry_is_link() for deciding whether a request has a skb linked to it. Remove skb_entry_set_link() and open code it instead as it is really trivial now. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/netfront: don't read data from request on the ring pageJuergen Gross1-43/+37
commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream. In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/netfront: read response from backend only onceJuergen Gross1-19/+19
commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream. In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/blkfront: don't trust the backend response data blindlyJuergen Gross1-17/+53
commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream. Today blkfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Introduce a new state of the ring BLKIF_STATE_ERROR which will be switched to in case an inconsistency is being detected. Recovering from this state is possible only via removing and adding the virtual device again (e.g. via a suspend/resume cycle). Make all warning messages issued due to valid error responses rate limited in order to avoid message floods being triggered by a malicious backend. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/blkfront: don't take local copy of a request from the ring pageJuergen Gross1-10/+15
commit 8f5a695d99000fc3aa73934d7ced33cfc64dcdab upstream. In order to avoid a malicious backend being able to influence the local copy of a request build the request locally first and then copy it to the ring page instead of doing it the other way round as today. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen/blkfront: read response from backend only onceJuergen Gross1-17/+18
commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream. In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01xen: sync include/xen/interface/io/ring.h with Xen's newest versionJuergen Gross1-135/+158
commit 629a5d87e26fe96bcaab44cbb81f5866af6f7008 upstream. Sync include/xen/interface/io/ring.h with Xen's newest version in order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW() macros. Note that this will correct the wrong license info by adding the missing original copyright notice. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01fuse: release pipe buf after last useMiklos Szeredi1-5/+5
commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream. Checking buf->flags should be done before the pipe_buf_release() is called on the pipe buffer, since releasing the buffer might modify the flags. This is exactly what page_cache_pipe_buf_release() does, and which results in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was trying to fix. Reported-by: Justin Forbes <jmforbes@linuxtx.org> Fixes: 712a951025c0 ("fuse: fix page stealing") Cc: <stable@vger.kernel.org> # v2.6.35 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01NFC: add NCI_UNREG flag to eliminate the raceLin Ma2-2/+18
commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 upstream. There are two sites that calls queue_work() after the destroy_workqueue() and lead to possible UAF. The first site is nci_send_cmd(), which can happen after the nci_close_device as below nfcmrvl_nci_unregister_dev | nfc_genl_dev_up nci_close_device | flush_workqueue | del_timer_sync | nci_unregister_device | nfc_get_device destroy_workqueue | nfc_dev_up nfc_unregister_device | nci_dev_up device_del | nci_open_device | __nci_request | nci_send_cmd | queue_work !!! Another site is nci_cmd_timer, awaked by the nci_cmd_work from the nci_send_cmd. ... | ... nci_unregister_device | queue_work destroy_workqueue | nfc_unregister_device | ... device_del | nci_cmd_work | mod_timer | ... | nci_cmd_timer | queue_work !!! For the above two UAF, the root cause is that the nfc_dev_up can race between the nci_unregister_device routine. Therefore, this patch introduce NCI_UNREG flag to easily eliminate the possible race. In addition, the mutex_lock in nci_close_device can act as a barrier. Signed-off-by: Lin Ma <linma@zju.edu.cn> Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01hugetlbfs: flush TLBs correctly after huge_pmd_unshareNadav Amit8-4/+87
commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream. When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB flush is missing. This TLB flush must be performed before releasing the i_mmap_rwsem, in order to prevent an unshared PMDs page from being released and reused before the TLB flush took place. Arguably, a comprehensive solution would use mmu_gather interface to batch the TLB flushes and the PMDs page release, however it is not an easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2) deferring the release of the page reference for the PMDs page until after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into thinking PMDs are shared when they are not. Fix __unmap_hugepage_range() by adding the missing TLB flush, and forcing a flush when unshare is successful. Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6 Signed-off-by: Nadav Amit <namit@vmware.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01s390/mm: validate VMA in PGSTE manipulation functionsDavid Hildenbrand1-0/+13
commit fe3d10024073f06f04c74b9674bd71ccc1d787cf upstream. We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA. Further, we should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte(). Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01tracing: Check pid filtering when creating eventsSteven Rostedt (VMware)1-0/+7
commit 6cb206508b621a9a0a2c35b60540e399225c8243 upstream. When pid filtering is activated in an instance, all of the events trace files for that instance has the PID_FILTER flag set. This determines whether or not pid filtering needs to be done on the event, otherwise the event is executed as normal. If pid filtering is enabled when an event is created (via a dynamic event or modules), its flag is not updated to reflect the current state, and the events are not filtered properly. Cc: stable@vger.kernel.org Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01vhost/vsock: fix incorrect used length reported to the guestStefano Garzarella1-1/+1
commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream. The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers). In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: Halil Pasic <pasic@linux.ibm.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01net: hns3: fix VF RSS failed problem after PF enable multi-TCsGuangbin Huang1-2/+2
[ Upstream commit 8d2ad993aa05c0768f00c886c9d369cd97a337ac ] When PF is set to multi-TCs and configured mapping relationship between priorities and TCs, the hardware will active these settings for this PF and its VFs. In this case when VF just uses one TC and its rx packets contain priority, and if the priority is not mapped to TC0, as other TCs of VF is not valid, hardware always put this kind of packets to the queue 0. It cause this kind of packets of VF can not be used RSS function. To fix this problem, set tc mode of all unused TCs of VF to the setting of TC0, then rx packet with priority which map to unused TC will be direct to TC0. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net/smc: Don't call clcsock shutdown twice when smc shutdownTony Lu1-1/+7
[ Upstream commit bacb6c1e47691cda4a95056c21b5487fb7199fcc ] When applications call shutdown() with SHUT_RDWR in userspace, smc_close_active() calls kernel_sock_shutdown(), and it is called twice in smc_shutdown(). This fixes this by checking sk_state before do clcsock shutdown, and avoids missing the application's call of smc_shutdown(). Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48Huang Pei1-1/+1
[ Upstream commit 41ce097f714401e6ad8f3f5eb30d7f91b0b5e495 ] It hangup when booting Loongson 3A1000 with BOTH CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn out to use 2-level pgtable instead of 3-level. 64KB page size with 2-level pgtable only cover 42 bits VA, use 3-level pgtable to cover all 48 bits VA(55 bits) Fixes: 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS) Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flowsEric Dumazet1-2/+3
[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ] While testing BIG TCP patch series, I was expecting that TCP_RR workloads with 80KB requests/answers would send one 80KB TSO packet, then being received as a single GRO packet. It turns out this was not happening, and the root cause was that cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC. Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC needed a budget of ~20 segments. Ideally these TCP_RR flows should not exit slow start. Cubic Hystart should reset itself at each round, instead of assuming every TCP flow is a bulk one. Note that even after this patch, Hystart can still trigger, depending on scheduling artifacts, but at a higher CWND/SSTHRESH threshold, keeping optimal TSO packet sizes. Tested: ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072 nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests" Before: 8605 Ip6InReceives 87541 0.0 Ip6OutRequests 129496 0.0 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 30 0.0 After: 8760 Ip6InReceives 88514 0.0 Ip6OutRequests 87975 0.0 Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01PM: hibernate: use correct mode for swsusp_close()Thomas Zeitlhofer1-3/+3
[ Upstream commit cefcf24b4d351daf70ecd945324e200d3736821e ] Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") changed the opening mode of the block device to (FMODE_READ | FMODE_EXCL). In the corresponding calls to swsusp_close(), the mode is still just FMODE_READ which triggers the warning in blkdev_flush_mapping() on resume from hibernate. So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the device. Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net/smc: Ensure the active closing peer first closes clcsockTony Lu1-0/+6
[ Upstream commit 606a63c9783a32a45bd2ef0eee393711d75b3284 ] The side that actively closed socket, it's clcsock doesn't enter TIME_WAIT state, but the passive side does it. It should show the same behavior as TCP sockets. Consider this, when client actively closes the socket, the clcsock in server enters TIME_WAIT state, which means the address is occupied and won't be reused before TIME_WAIT dismissing. If we restarted server, the service would be unavailable for a long time. To solve this issue, shutdown the clcsock in [A], perform the TCP active close progress first, before the passive closed side closing it. So that the actively closed side enters TIME_WAIT, not the passive one. Client | Server close() // client actively close | smc_release() | smc_close_active() // PEERCLOSEWAIT1 | smc_close_final() // abort or closed = 1| smc_cdc_get_slot_and_msg_send() | [A] | |smc_cdc_msg_recv_action() // ACTIVE | queue_work(smc_close_wq, &conn->close_work) | smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_passive_abort_received() // only in abort | |close() // server recv zero, close | smc_release() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_active() | smc_close_abort() or smc_close_final() // CLOSED | smc_cdc_get_slot_and_msg_send() // abort or closed = 1 smc_cdc_msg_recv_action() | smc_clcsock_release() queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free() smc_close_passive_abort_received() // CLOSED| smc_conn_free() | smc_clcsock_release() | sock_release(tcp) // passive close clc | Link: https://www.spinics.net/lists/netdev/msg780407.html Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ipv6: fix typos in __ip6_finish_output()Eric Dumazet1-1/+1
[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ] We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED Found by code inspection, please double check that fixing this bug does not surface other bugs. Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tobias Brunner <tobias@strongswan.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Tested-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/vc4: fix error code in vc4_create_object()Dan Carpenter1-1/+1
[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ] The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy1-1/+1
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ] While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCETakashi Iwai2-5/+5
[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ] When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook <keescook@chromium.org> Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01NFSv42: Don't fail clone() unless the OP_CLONE operation failedTrond Myklebust1-2/+1
[ Upstream commit d3c45824ad65aebf765fcf51366d317a29538820 ] The failure to retrieve post-op attributes has no bearing on whether or not the clone operation itself was successful. We must therefore ignore the return value of decode_getfattr() when looking at the success or failure of nfs4_xdr_dec_clone(). Fixes: 36022770de6c ("nfs42: add CLONE xdr functions") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01firmware: arm_scmi: pm: Propagate return value to callerPeng Fan1-3/+1
[ Upstream commit 1446fc6c678e8d8b31606a4b877abe205f344b38 ] of_genpd_add_provider_onecell may return error, so let's propagate its return value to caller Link: https://lore.kernel.org/r/20211116064227.20571-1-peng.fan@oss.nxp.com Fixes: 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: ieee802154: handle iftypes as u32Alexander Aring1-3/+4
[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ] This patch fixes an issue that an u32 netlink value is handled as a signed enum value which doesn't fit into the range of u32 netlink type. If it's handled as -1 value some BIT() evaluation ends in a shift-out-of-bounds issue. To solve the issue we set the to u32 max which is s32 "-1" value to keep backwards compatibility and let the followed enum values start counting at 0. This brings the compiler to never handle the enum as signed and a check if the value is above NL802154_IFTYPE_MAX should filter -1 out. Fixes: f3ea5e44231a ("ieee802154: add new interface command") Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ASoC: topology: Add missing rwsem around snd_ctl_remove() callsTakashi Iwai1-0/+3
[ Upstream commit 7e567b5ae06315ef2d70666b149962e2bb4b97af ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 8a9782346dcc ("ASoC: topology: Add topology core") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ASoC: qdsp6: q6routing: Conditionally reset FrontEnd MixerSrinivas Kandagatla1-1/+5
[ Upstream commit 861afeac7990587588d057b2c0b3222331c3da29 ] Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Add interrupt properties to GPIO nodeFlorian Fainelli1-0/+2
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Fix I2C controller interruptFlorian Fainelli1-1/+1
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01netfilter: ipvs: Fix reuse connection if RS weight is 0yangxingwu2-6/+5
[ Upstream commit c95c07836fa4c1767ed11d8eca0769c652760e32 ] We are changing expire_nodest_conn to work even for reused connections when conn_reuse_mode=0, just as what was done with commit dc7b3eb900aa ("ipvs: Fix reuse connection if real server is dead"). For controlled and persistent connections, the new connection will get the needed real server depending on the rules in ip_vs_check_template(). Fixes: d752c3645717 ("ipvs: allow rescheduling of new connections when port reuse is detected") Co-developed-by: Chuanqi Liu <legend050709@qq.com> Signed-off-by: Chuanqi Liu <legend050709@qq.com> Signed-off-by: yangxingwu <xingwu.yang@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio functionMarek Behún3-1/+7
commit 715878016984b2617f6c1f177c50039e12e7bd5b upstream. We found out that we are unable to control the PERST# signal via the default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe register space called PERSTN_GPIO_EN (D0088004[3]), but changing the value of this register does not change the pin output when measuring with voltmeter. We do not know if this is a bug in the SOC, or if it works only when PCIe controller is in a certain state. Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before training link") says that when this pin changes pinctrl mode from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief moment. So currently the situation is that on A3700 boards the PERST# signal is asserted in U-Boot (because the code in U-Boot issues reset via this pin via GPIO mode), and then in Linux by the obscure and undocumented mechanism described by the above mentioned commit. We want to issue PERST# signal in a known way, therefore this patch changes the pcie_reset_pin function from "pcie" to "gpio" and adds the reset-gpios property to the PCIe node in device tree files of EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already has this property and uDPU does not have a PCIe port). Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Remi Pommarel <repk@triplefau.lt> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01arm64: dts: marvell: armada-37xx: declare PCIe reset pinMiquel Raynal1-0/+9
commit a5470af981a0cc14a650af8da5186668971a4fc8 upstream. One pin can be muxed as PCIe endpoint card reset. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01pinctrl: armada-37xx: Correct PWM pins definitionsMarek Behún2-13/+12
commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream. The PWM pins on North Bridge on Armada 37xx can be configured into PWM or GPIO functions. When in PWM function, each pin can also be configured to drive low on 0 and tri-state on 1 (LED mode). The current definitions handle this by declaring two pin groups for each pin: - group "pwmN" with functions "pwm" and "gpio" - group "ledN_od" ("od" for open drain) with functions "led" and "gpio" This is semantically incorrect. The correct definition for each pin should be one group with three functions: "pwm", "led" and "gpio". Change the "pwmN" groups to support "led" function. Remove "ledN_od" groups. This cannot break backwards compatibility with older device trees: no device tree uses it since there is no PWM driver for this SOC yet. Also "ledN_od" groups are not even documented. Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group") Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01pinctrl: armada-37xx: add missing pin: PCIe1 WakeupGregory CLEMENT1-0/+1
commit 4d98fbaacd79a82f408febb66a9c42fe42361b16 upstream. Declare the PCIe1 Wakeup which was initially missing. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01pinctrl: armada-37xx: Correct mpp definitionsMarek Behún2-9/+19
commit 823868fceae3bac07cf5eccb128d6916e7a5ae9d upstream. This is a cleanup and fix of the patch by Ken Ma <make@marvell.com>. Fix the mpp definitions according to newest revision of the specification: - northbridge: fix pmic1 gpio number to 7 fix pmic0 gpio number to 6 - southbridge split pcie1 group bit mask to BIT(5) and BIT(9) fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13) add smi group with bit mask BIT(4) [gregory: split the pcie group in 2, as at hardware level they can be configured separately] Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix checking for link up via LTSSM statePali Rohár1-4/+67
commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream. Current implementation of advk_pcie_link_up() is wrong as it marks also link disabled or hot reset states as link up. Fix it by marking link up only to those states which are defined in PCIe Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM. To simplify implementation, Define macros for every LTSSM state which aardvark hardware can return in CFG_REG register. Fix also checking for link training according to the same Table 4-14. Define a new function advk_pcie_link_training() for this purpose. Link: https://lore.kernel.org/r/20211005180952.6812-13-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Cc: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix link trainingPali Rohár1-83/+34
commit f76b36d40beee0a13aa8f6aa011df0d7cbbb8a7f upstream. Fix multiple link training issues in aardvark driver. The main reason of these issues was misunderstanding of what certain registers do, since their names and comments were misleading: before commit 96be36dbffac ("PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the pci-aardvark.c driver used custom macros for accessing standard PCIe Root Bridge registers, and misleading comments did not help to understand what the code was really doing. After doing more tests and experiments I've come to the conclusion that the SPEED_GEN register in aardvark sets the PCIe revision / generation compliance and forces maximal link speed. Both GEN3 and GEN2 values set the read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which matches with PCI Express specifications revisions 3, 2 and 1 respectively. Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and PCI_EXP_LNKCAP2_SLS to corresponding speed. (Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.) Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but tests showed that the default value is always 8.0 GT/s, independently of speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits. Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN bit actually doesn't do anything. Tests have shown that a delay is needed after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL currently does nothing, remove it. Commit 43fc679ced18 ("PCI: aardvark: Improve link training") introduced code which sets SPEED_GEN register based on negotiated link speed from PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as otherwise these cards were "invisible" on PCIe bus (probably because they crashed). But apparently more people reported the same issues with these cards also with other PCIe controllers [1] and I was able to reproduce this issue also with other "noname" WiFi cards based on Atheros QCA9890 chip (with the same PCI vendor/device ids as Atheros QCA9880). So this is not an issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this issue only exists if the kernel is compiled with PCIe ASPM support, and a generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN is set to value GEN2 (5 GT/s). So remove this hack completely in the aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT property. Fix for Atheros QCA98xx chips is handled separately by patch [2]. These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing SPEED_GEN value) also explain why commit 6964494582f5 ("PCI: aardvark: Train link immediately after enabling training") somehow fixed detection of those problematic Compex cards with Atheros chips: if triggering link retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling link training (via LINK_TRAINING_EN), it did nothing. If there was a specific delay, aardvark HW already initialized PCIe link and therefore triggering link retraining caused the above issue. Compex cards triggered link down event and disappeared from the PCIe bus. Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before training link") added 100ms sleep before calling 'Start link training' command and explained that it is a requirement of PCI Express specification. But the code after this 100ms sleep was not doing 'Start link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root Bridge to put link into Recovery state. The required delay after fundamental reset is already done in function advk_pcie_wait_for_link() which also checks whether PCIe link is up. So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe Root Bridge, there is no need to wait 100ms again. Remove the extra msleep() call and update comment about the delay required by the PCI Express specification. According to Marvell Armada 3700 Functional Specifications, Link training should be enabled via aardvark register LINK_TRAINING_EN after selecting PCIe generation and x1 lane. There is no need to disable it prior resetting card via PERST# signal. This disabling code was introduced in commit 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") as a workaround for some Atheros cards. It turns out that this also is Atheros specific issue and affects any PCIe controller, not only aardvark. Moreover this Atheros issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN bit. So remove this code too. The problematic Compex cards described in previous git commits are correctly detected in advk_pcie_train_link() function even after applying all these changes. Note that with this patch, and also prior this patch, some NVMe disks which support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This issue first needs to be properly investigated. I will send a fix in the future. On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are autonomously by HW autonegotiated at full 5 GT/s speed without need of any software interaction. Armada 3700 Functional Specifications describes the following steps for link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal rate is 5 GT/s, poll until link training is complete, enable ASPM L0s. The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the need to achieve 5 GT/s speed (as changing link speed is done by throw to recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling ASPM L0s (but in this case ASPM L0s should have been enabled prior PCI_EXP_LNKCTL_RL). It is unknown why the original pci-aardvark.c driver was triggering PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not align with neither PCIe base specifications nor with Armada 3700 Functional Specification. (Note that in older versions of aardvark, this bit was called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.) It is also unknown why Armada 3700 Functional Specification says that it is needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe base specification 5 GT/s speed negotiation is supposed to be entirely autonomous, even if initial speed is 2.5 GT/s. [1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/ [2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/ Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix PCIe Max Payload Size settingPali Rohár1-1/+2
commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream. Change PCIe Max Payload Size setting in PCIe Device Control register to 512 bytes to align with PCIe Link Initialization sequence as defined in Marvell Armada 3700 Functional Specification. According to the specification, maximal Max Payload Size supported by this device is 512 bytes. Without this kernel prints suspicious line: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512) With this change it changes to: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512) Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Configure PCIe resources from 'ranges' DT propertyPali Rohár1-1/+189
commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream. In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") was removed aardvark PCIe outbound window configuration and commit description said that was recommended solution by HW designers. But that commit completely removed support for configuring PCIe IO resources without removing PCIe IO 'ranges' from DTS files. After that commit PCIe IO space started to be treated as PCIe MEM space and accessing it just caused kernel crash. Moreover implementation of PCIe outbound windows prior that commit was incorrect. It completely ignored offset between CPU address and PCIe bus address and expected that in DTS is CPU address always same as PCIe bus address without doing any checks. Also it completely ignored size of every PCIe resource specified in 'ranges' DTS property and expected that every PCIe resource has size 128 MB (also for PCIe IO range). Again without any check. Apparently none of PCIe resource has in DTS specified size of 128 MB. So it was completely broken and thanks to how aardvark mask works, configuration was completely ignored. This patch reverts back support for PCIe outbound window configuration but implementation is a new without issues mentioned above. PCIe outbound window is required when DTS specify in 'ranges' property non-zero offset between CPU and PCIe address space. To address recommendation by HW designers as specified in commit description of 6df6ba974a55, set default outbound parameters as PCIe MEM access without translation and therefore for this PCIe 'ranges' it is not needed to configure PCIe outbound window. For PCIe IO space is needed to configure aardvark PCIe outbound window. This patch fixes kernel crash when trying to access PCIe IO space. Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Update comment about disabling link trainingPali Rohár1-1/+8
commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream. According to PCI Express Base Specifications (rev 4.0, 6.6.1 "Conventional reset"), after fundamental reset a 100ms delay is needed prior to enabling link training. Update comment in code to reflect this requirement. Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()Pali Rohár1-30/+34
commit d0c6a3475b033960e85ae2bf176b14cab0a627d2 upstream. Move code which belongs to link training (delays and resets) into advk_pcie_train_link() function, so everything related to link training, including timings is at one place. After experiments it can be observed that link training in aardvark hardware is very sensitive to timings and delays, so it is a good idea to have this code at the same place as link training calls. This patch does not change behavior of aardvark initialization. Link: https://lore.kernel.org/r/20200907111038.5811-6-pali@kernel.org Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix compilation on s390Pali Rohár1-1/+1
commit b32c012e4b98f0126aa327be2d1f409963057643 upstream. Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file. This was reported by kernel test bot when compiling for s390. drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW' Link: https://lore.kernel.org/r/202006211118.LxtENQfl%25lkp@intel.com Link: https://lore.kernel.org/r/20200907111038.5811-2-pali@kernel.org Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Don't touch PCIe registers if no card connectedPali Rohár1-0/+7
commit 70e380250c3621c55ff218cbaf2272830d9dbb1d upstream. When there is no PCIe card connected and advk_pcie_rd_conf() or advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated root bridge, the aardvark driver throws the following error message: advk-pcie d0070000.pcie: config read/write timed out Obviously accessing PCIe registers of disconnected card is not possible. Extend check in advk_pcie_valid_device() function for validating availability of PCIe bus. If PCIe link is down, then the device is marked as Not Found and the driver does not try to access these registers. This is just an optimization to prevent accessing PCIe registers when card is disconnected. Trying to access PCIe registers of disconnected card does not cause any crash, kernel just needs to wait for a timeout. So if card disappear immediately after checking for PCIe link (before accessing PCIe registers), it does not cause any problems. Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Indicate error in 'val' when config read failsPali Rohár1-1/+3
commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream. Most callers of config read do not check for return value. But most of the ones that do, checks for error indication in 'val' variable. This patch updates error handling in advk_pcie_rd_conf() function. If PIO transfer fails then 'val' variable is set to 0xffffffff which indicates failture. Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520 Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macrosPali Rohár1-23/+19
commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream. PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark. Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Issue PERST via GPIOPali Rohár1-1/+42
commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 upstream. Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-12 23:39:41 +0300