summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-11tipc: Abort excessive send requests as early as possibleAllan Stephens2-1/+14
Adds checks to TIPC's socket send routines to promptly detect and abort attempts to send more than 66,000 bytes in a single TIPC message or more than 2**31-1 bytes in a single TIPC byte stream request. In addition, this ensures that the number of iovecs in a send request does not exceed the limits of a standard integer variable. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Strengthen checks for neighboring node discoveryAllan Stephens2-4/+14
Enhances existing checks on the discovery domain associated with a TIPC bearer. A bearer can no longer be configured to accept links from itself only (which would be pointless), or to nodes outside its own cluster (since multi-cluster support has now been removed from TIPC). Also, the neighbor discovery routine now validates link setup requests against the configured discovery domain for the bearer, rather than simply ensuring the requesting node belongs to the node's own cluster. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: make zone/cluster mask constants a definePaul Gortmaker1-2/+5
This allows them to be available for easy re-use in other places and avoids trivial mistakes caused by "count the f's and 0's". Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Fix sk_buff leaks when link congestion is detectedAllan Stephens2-7/+4
Modifies a TIPC send routine that did not discard the outgoing sk_buff if it was not transmitted because of link congestion; this eliminates the potential for buffer leakage in the many callers who did not clean up the unsent buffer. (The two routines that previously did discard the unsent buffer have been updated to eliminate their now-redundant clean up.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Update destination node field on incoming multicast messagesAllan Stephens1-0/+1
Sets the destination node field of an incoming multicast message to the receiving node's network address before handing off the message to each receiving port. This ensures that, in the event the destination port returns the message to the sender, the sender can identify which node the destination port belonged to. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Fix problem with bundled multicast messageAllan Stephens1-0/+2
Set the destination node and destination port fields of an outgoing multicast message header to zero; this is necessary to ensure that the receiving node can route the message properly if it was packed into a bundle due to link congestion. (Previously, there was a chance that the receiving node would send the unbundled message to a random node & port, rather than processing the message itself.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Set name lookup scope field properly in all data messagesAllan Stephens1-0/+3
Ensures that all outgoing data messages have the "name lookup scope" field of their header set correctly; that is, named multicast messages now specify cluster-wide name lookup, while messages not using TIPC naming zero out the lookup field. (Previously, the lookup scope specified for these types of messages was inherited from the last message sent by the sending port.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Fix issues with fragmentation of an existing message bufferAllan Stephens1-14/+23
Modifies the routine that fragments an existing message buffer to use similar logic to that used when generating fragments from an iovec. The routine now creates a complete chain of fragments and adds them to the link transmit queue as a unit, so that the link sends all fragments or none; this prevents the incomplete transmission of a fragmented message that might otherwise result because of link congestion or memory exhaustion. This change also ensures that the counter recording the number of fragmented messages sent by the link is now incremented only if the message is actually sent. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Avoid pointless masking of fragmented message identifierAllan Stephens1-2/+2
Eliminates code that restricts a link's counter of its fragmented messages to a 16-bit value, since the counter value is automatically restricted to this range when it is written into the message header. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Don't initialize link selector field in fragmented messagesAllan Stephens1-2/+0
Eliminates code that sets the link selector field in the header of fragmented messages, since this information is never referenced. (The unnecessary initialization was harmless as it was over-written by the fragmented message identifier value before the fragments were transmitted.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Remove code to emulate loss of broadcast messagesAllan Stephens1-18/+0
Eliminates optional code used to test TIPC's ability to recover from lost broadcast messages. This code duplicates functionality already provided by the network stack's QoS option "network emulator". Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Cosmetic consolidation of internal message type definitionsAllan Stephens1-29/+29
Half of the #define entries in msg.h were down at the bottom of the header, instead of up at the top before any of the static inlines etc. Relocate them up to the top, to be consistent with the other normal linux header file layout conventions. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Eliminate unused routing message definitionsAllan Stephens1-9/+0
Gets rid of unused constants defining the types used in routing messages. These messages no longer exist in TIPC now that multicluster and multizone support has been eliminated. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-11tipc: Update comments in message header include fileAllan Stephens1-66/+23
Removes comments in TIPC's message header include file that are outdated and/or unnecessary. Also introduces short comments (or supplements existing ones) to better describe several set of existing symbolic constants. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Drop __TIME__ usageMichal Marek1-2/+1
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek <mmarek@suse.cz> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: netdev@vger.kernel.org Cc: tipc-discussion@lists.sourceforge.net Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-09sctp: Fix debug message args.David S. Miller1-2/+2
I messed things up when I converted over to the transport flow, I passed the ipv4 address value instead of it's address. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Pass flow key down into ip_append_*().David S. Miller5-17/+21
This way rt->rt_dst accesses are unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Pass flow keys down into datagram packet building engine.David S. Miller5-93/+91
This way ip_output.c no longer needs rt->rt_{src,dst}. We already have these keys sitting, ready and waiting, on the stack or in a socket structure. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09udp: Use flow key information instead of rt->rt_{src,dst}David S. Miller1-6/+8
We have two cases. Either the socket is in TCP_ESTABLISHED state and connect() filled in the inet socket cork flow, or we looked up the route here and used an on-stack flow. Track which one it was, and use it to obtain src/dst addrs. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: Allow ethtool to set interface in loopback mode.Mahesh Bandewar3-3/+5
This patch enables ethtool to set the loopback mode on a given interface. By configuring the interface in loopback mode in conjunction with a policy route / rule, a userland application can stress the egress / ingress path exposing the flows of the change in progress and potentially help developer(s) understand the impact of those changes without even sending a packet out on the network. Following set of commands illustrates one such example - a) ip -4 addr add 192.168.1.1/24 dev eth1 b) ip -4 rule add from all iif eth1 lookup 250 c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250 d) arp -Ds 192.168.1.100 eth1 e) arp -Ds 192.168.1.200 eth1 f) sysctl -w net.ipv4.ip_nonlocal_bind=1 g) sysctl -w net.ipv4.conf.all.accept_local=1 # Assuming that the machine has 8 cores h) taskset 000f netserver -L 192.168.1.200 i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09pktgen: use %pI6c for printing IPv6 addressesAlexey Dobriyan1-96/+13
I don't know why %pI6 doesn't compress, but the format specifier is kernel-standard, so use it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ethtool: Add 20G bit definitionsYaniv Rosner1-0/+4
Add 20G supported and advertising bit definitions. 20G will be supported with the 57840 chips. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> ------ include/linux/ethtool.h | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller20-557/+712
2011-05-09tcp: Use cork flow info instead of rt->rt_dst in tcp_v4_get_peer()David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09sctp: Don't use rt->rt_{src,dst} in sctp_v4_xmit()David S. Miller1-2/+2
Now we can pick it out of the transport's flow key. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit().David S. Miller1-4/+4
Now we can pick it out of the provided flow key. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09inet: Pass flowi to ->queue_xmit().David S. Miller10-15/+17
This allows us to acquire the exact route keying information from the protocol, however that might be managed. It handles all of the possibilities, from the simplest case of storing the key in inet->cork.fl to the more complex setup SCTP has where individual transports determine the flow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.David S. Miller2-17/+20
Operation order is now transposed, we first create the child socket then we try to hook up the route. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Create inet_csk_route_child_sock().David S. Miller2-0/+36
This is just like inet_csk_route_req() except that it operates after we've created the new child socket. In this way we can use the new socket's cork flow for proper route key storage. This will be used by DCCP and TCP child socket creation handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09sctp: Store a flowi in transports to provide persistent keying.David S. Miller2-6/+4
Several future simplifications are possible now because of this. For example, the sctp_addr unions can simply refer directly to the flowi information. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Use cork flow in ip_queue_xmit()David S. Miller1-2/+3
All invokers of ip_queue_xmit() must make certain that the socket is locked. All of SCTP, TCP, DCCP, and L2TP now make sure this is the case. Therefore we can use the cork flow during output route lookup in ip_queue_xmit() when the socket route check fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Use cork flow in inet_sk_{reselect_saddr,rebuild_header}()David S. Miller1-5/+7
These two functions must be invoked only when the socket is locked (because socket identity modifications are made non-atomically). Therefore we can use the cork flow for output route lookups. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ipv4: Lock socket and use cork flow in ip4_datagram_connect().David S. Miller1-8/+15
This is to make sure that an l2tp socket's inet cork flow is fully filled in, when it's encapsulated in UDP. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09l2tp: Use cork flow in l2tp_ip_connect() and l2tp_ip_sendmsg()David S. Miller1-7/+9
Now that the socket is consistently locked in these two routines, this transformation is legal. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09l2tp: Fix locking in l2tp_core.cDavid S. Miller1-0/+8
l2tp_xmit_skb() must take the socket lock. It makes use of ip_queue_xmit() which expects to execute in a socket atomic context. Since we execute this function in software interrupts, we cannot use the usual lock_sock()/release_sock() sequence, instead we have to use bh_lock_sock() and see if a user has the socket locked, and if so drop the packet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09l2tp: Fix locking in l2tp_ip.cDavid S. Miller1-4/+15
Both l2tp_ip_connect() and l2tp_ip_sendmsg() must take the socket lock. They both modify socket state non-atomically, and in particular l2tp_ip_sendmsg() increments socket private counters without using atomic operations. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09tcp: Use cork flow in tcp_v4_connect()David S. Miller1-6/+7
Since this is invoked from inet_stream_connect() the socket is locked and therefore this usage is safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09dccp: Use cork flow in dccp_v4_connect()David S. Miller1-5/+6
Since this is invoked from inet_stream_connect() the socket is locked and therefore this usage is safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ethtool: remove phys_id from ethtool_opsStephen Hemminger2-12/+1
After that all the upstream kernel drivers now use phys_id, and the old ethtool_ops interface (phys_id) can be removed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08batman-adv: remove duplicate code from function is_bidirectional_neigh()Daniele Furlan1-49/+25
In function is_bidirectional_neigh the code that find out the one hop neighbor is duplicated. Signed-off-by: Daniele Furlan <daniele.furlan@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Remove multiline comments from line endingSven Eckelmann4-28/+29
It is slightly irritating that comments after a long line span over multiple lines without any code. It is easier to put them before the actual code and reduce the number of lines which the eye has to read. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: rename everything from *hna* into *tt* (translation table)Antonio Quartulli19-330/+332
To be coherent, all the functions/variables/constants have been renamed to the TranslationTable style Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Fix refcount imbalance in find_routerMarek Lindner1-5/+9
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Avoid deadlock between rtnl_lock and s_activeSven Eckelmann1-9/+9
The hard_if_event is called by the notifier with rtnl_lock and tries to remove sysfs entries when a NETDEV_UNREGISTER event is received. This will automatically take the s_active lock. The s_active lock is also used when a new interface is added to a meshif through sysfs. In that situation we cannot wait for the rntl_lock before creating the actual batman-adv interface to prevent a deadlock. It is still possible to try to get the rtnl_lock and immediately abort the current operation when the trylock call failed. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: Remove unnecessary hardif_list_lockSven Eckelmann4-24/+13
hardif_list_lock is unneccessary because we already ensure that no multiple admin operations can take place through rtnl_lock. hardif_list_lock only adds additional overhead and complexity. Critical functions now check whether they are called with rtnl_lock using ASSERT_RTNL. It indirectly fixes the problem that orig_hash_del_if() expects that only one interface is deleted from hardif_list at a time, but hardif_remove_interfaces() removes all at once and then calls orig_hash_del_if(). Reported-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: multi vlan support for bridge loop detectionMarek Lindner3-113/+298
The bridge loop detection for batman-adv allows the bat0 interface to be bridged into an ethernet segment which other batman-adv nodes are connected to. In order to also allow multiple VLANs on top of the bat0 interface to be bridged into the ethernet segment this patch extends the aforementioned bridge loop detection. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08batman-adv: remove misplaced commentMarek Lindner1-2/+0
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08Merge branch 'master' of ↵David S. Miller7-96/+100
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-05-08hamachi: Put back RX_CHECKSUMDavid S. Miller1-0/+1
I deleted it by mistake in the TX_CHECKSUM removal commit. Reported-by: Michał Mirosław <mirqus@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07ixgbe: add ethtool counters for OS2BMCEmil Tantilov3-1/+18
OS2BMC registers are available for X540. This patch adds ethtool counters based on those registers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 11:52:22 +0300