summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-03-09mlx4: do not access rx_desc from mlx4_en_process_rx_cq()Eric Dumazet1-6/+3
Instead of fetching dma address from rx_desc->data[0].addr, prefer using frags[0].dma + frags[0].page_offset to avoid a potential cache line miss. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: add rx_alloc_pages counter in ethtool -SEric Dumazet5-6/+12
This new counter tracks number of pages that we allocated for one port. lpaa24:~# ethtool -S eth0 | egrep 'rx_alloc_pages|rx_packets' rx_packets: 306755183 rx_alloc_pages: 932897 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: add page recycling in receive pathEric Dumazet2-177/+82
Same technique than some Intel drivers, for arches where PAGE_SIZE = 4096 In most cases, pages are reused because they were consumed before we could loop around the RX ring. This brings back performance, and is even better, a single TCP flow reaches 30Gbit on my hosts. v2: added full memset() in mlx4_en_free_frag(), as Tariq found it was needed if we switch to large MTU, as priv->log_rx_info can dynamically be changed. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: use order-0 pages for RXEric Dumazet2-44/+33
Use of order-3 pages is problematic in some cases. This patch might add three kinds of regression : 1) a CPU performance regression, but we will add later page recycling and performance should be back. 2) TCP receiver could grow its receive window slightly slower, because skb->len/skb->truesize ratio will decrease. This is mostly ok, we prefer being conservative to not risk OOM, and eventually tune TCP better in the future. This is consistent with other drivers using 2048 per ethernet frame. 3) Because we allocate one page per RX slot, we consume more memory for the ring buffers. XDP already had this constraint anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: removal of frag_sizes[]Eric Dumazet2-22/+10
We will soon use order-0 pages, and frag truesize will more precisely match real sizes. In the new model, we prefer to use <= 2048 bytes fragments, so that we can use page-recycle technique on PAGE_SIZE=4096 arches. We will still pack as much frames as possible on arches with big pages, like PowerPC. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: reduce rx ring page_cache sizeEric Dumazet3-10/+15
We only need to store the page and dma address. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: rx_headroom is a per port attributeEric Dumazet2-4/+4
No need to duplicate it per RX queue / frags. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: get rid of frag_prefix_sizeEric Dumazet2-17/+13
Using per frag storage for frag_prefix_size is really silly. mlx4_en_complete_rx_desc() has all needed info already. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: remove order field from mlx4_en_frag_infoEric Dumazet2-4/+4
This is really a port attribute, no need to duplicate it per RX queue and per frag. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlx4: dma_dir is a mlx4_en_priv attributeEric Dumazet3-12/+12
No need to duplicate it for all queues and frags. num_frags & log_rx_info become u8 to save space. u8 accesses are a bit faster than u16 anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09Merge branch 'mlxsw-cosmetics'David S. Miller3-25/+12
Jiri Pirko says: ==================== mlxsw: cosmetics Couple of cosmetic mlxsw patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlxsw: pci: Remove unused bitIdo Schimmel2-14/+0
The overrun ignore bit isn't supported by the device's firmware and was recently removed from the programmer's reference manual (PRM). Remove it from the driver as well. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09mlxsw: spectrum: Fix helper function and port variable namesJiri Pirko1-11/+12
Commit dd82364c3ab9 ("mlxsw: Flip to the new dev walk API") did some small changes in mlxsw code, but it did not respect the naming conventions. So fix this now. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: use proper lockdep annotation in __sk_dst_set()Eric Dumazet1-5/+2
__sk_dst_set() must be called while we own the socket. We can get proper lockdep coverage using lockdep_sock_is_held() and rcu_dereference_protected() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09Merge branch 'flow_dissector-improvements'David S. Miller1-188/+238
Jiri Pirko says: ==================== flow dissector improvements This patchset follows-up the discussion about future extensions of flow dissector and tries to address the mentioned concerns. Some parts are cut out into sub-functions. Also, the processing of the code (ARP, MPLS) is made dependent on user actually requiring the bisected values. This prepares the code for future extensions to bisect IPv6 ND messages, TCP flags, etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09flow_dissector: Move GRE dissection into a separate functionJiri Pirko1-110/+134
Make the main flow_dissect function a bit smaller and move the GRE dissection into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09flow_dissector: rename "proto again" goto labelJiri Pirko1-4/+4
Align with "ip_proto_again" label used in the same function and rename vague "again" to "proto_again". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09flow_dissector: Fix GRE header error pathJiri Pirko1-3/+3
Now, when an unexpected element in the GRE header appears, we break so the l4 ports are processed. But since the ports are processed unconditionally, there will be certainly random values dissected. Fix this by just bailing out in such situations. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09flow_dissector: Move MPLS dissection into a separate functionJiri Pirko1-22/+34
Make the main flow_dissect function a bit smaller and move the MPLS dissection into a separate function. Along with that, do the MPLS header processing only in case the flow dissection user requires it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09flow_dissector: Move ARP dissection into a separate functionJiri Pirko1-53/+67
Make the main flow_dissect function a bit smaller and move the ARP dissection into a separate function. Along with that, do the ARP header processing only in case the flow dissection user requires it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: toshiba: spider_net: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-10/+14
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: toshiba: ps3_genic_net: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+29
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: sun: sunhme: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-28/+34
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: sun: sungem: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-41/+57
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: sun: niu: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-17/+20
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: sun: cassini: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-46/+52
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: smsc: smc91x: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+25
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-24/+27
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-08decnet: Use TCP nagle macro instead of literal number in decnetGao Feng1-6/+7
Use existing TCP nagle macro TCP_NAGLE_OFF and TCP_NAGLE_CORK instead of the literal number 1 and 2 in the current decnet codes. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: qcom/emac: optimize QDF2400 SGMII RX/TX impedence valuesTimur Tabi1-0/+6
Adjust the impedance values of the RX and TX lanes in the SGMII block so that they are closer to optimal values. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07Merge branch 'bgmac-cleanups-PM-support'David S. Miller4-37/+116
Jon Mason says: ==================== net: ethernet: bgmac: PM support and clean-ups Changes in v3: * Corrected a bug Florian found and added his Reviewed-by Changes in v2: * Reworked the PM patch with Florian's suggestions Add code to support Power Management (only tested on NS2), and add some code clean-ups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: ethernet: bgmac: driver power manangementJoey Zhong3-0/+87
Implement suspend/resume callbacks in the bgmac driver. This makes sure that we de-initialize and re-initialize the hardware correctly before entering suspend and when resuming. Signed-off-by: Joey Zhong <zhongx@broadcom.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: ethernet: bgmac: unify code of the same familyJon Mason1-36/+28
BCM471X and BCM535X are of the same family (from what I can derive from internal documents). Group them into the case statement together, which results in more code reuse. Also, use existing helper variables to make the code a little more readable too. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: ethernet: bgmac: use #defines for MAX sizeJon Mason1-1/+1
The maximum frame size is really just the standard ethernet frame size and FCS. So use those existing defines to make the code a little more beautiful. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: axienet: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure ndev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07Merge branch 'netvsc-NAPI'David S. Miller6-143/+242
Stephen Hemminger says: ==================== NAPI support for Hyper-V These patches enable NAPI, GRO and napi_alloc_skb for Hyper-V netvsc driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07netvsc: replace netdev_alloc_skb_ip_align with napi_alloc_skbstephen hemminger1-2/+4
Gives potential performance gain. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07netvsc: enable GROstephen hemminger1-4/+4
Use GRO when receiving packets. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07netvsc: implement NAPIstephen hemminger4-47/+102
Use NAPI (softirq), to handle receive packets and send completions. Previously this was handled by tasklet. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07vmbus: introduce in-place packet iteratorstephen hemminger3-91/+133
This is mostly just a refactoring of previous functions (get_pkt_next_raw, put_pkt_raw and commit_rd_index) to make it easier to use for other drivers and NAPI. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07netvsc: don't overload variable in same functionstephen hemminger1-2/+2
There are two variables named packet in the same function. One is the metadata descriptor from host (vmpacket_descriptor) and the other is the control block in the skb used to hold metadata from send. Change name to avoid possible confusion and bugs. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07tools: hv: Add clean up function for Ubuntu configHaiyang Zhang1-0/+18
This patch adds a function to clean up duplicate config info on Ubuntu. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07ipv6: Provide ipv6 version of "disable_policy" sysctlDavid Forster3-0/+116
This provides equivalent functionality to the existing ipv4 "disable_policy" systcl. ie. Allows IPsec processing to be skipped on terminating packets on a per-interface basis. Signed-off-by: David Forster <dforster@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: smsc: smc91c92_cs: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-46/+52
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: smsc: epic100: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-7/+9
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: sis: sis900: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-9/+9
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: sis: sis190: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: silan: sc92031: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-36/+47
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: sgi: ioc3-eth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: rocker: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-23/+32
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 21:10:49 +0300