summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-04-24Merge branch 'fixes_for_v3.15' of ↵Linus Torvalds1-1/+1
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull dma-mapping fix from Marek Szyprowski: "A small fix for dma-mapping subsystem for ARM" * 'fixes_for_v3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: Fix mapping size value
2014-04-24Merge branch 'for-3.15-fixes' of ↵Linus Torvalds8-37/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Dan updated tag allocation to accomodate devices which choke when tags jump back and forth. Quite a few ahci MSI related fixes. A couple config dependency fixes and other misc fixes" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata/ahci: accommodate tag ordered controllers ahci: Do not receive interrupts sent by dummy ports ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range() ahci: Ensure "MSI Revert to Single Message" mode is not enforced ahci: do not request irq for dummy port pata_samsung_cf: fix ata_host_activate() failure handling pata_arasan_cf: fix ata_host_activate() failure handling ata: fix i.MX AHCI driver dependencies pata_at91: fix ata_host_activate() failure handling libata: Update queued trim blacklist for M5x0 drives libata: make AHCI_XGENE depend on PHY_XGENE
2014-04-24Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds13-21/+44
Pull ARM fixes from Russell King: "Various fixes and post-merge window updates. Included here are: - ensure Kconfig things which should be sorted remain sorted - fix three big-endian bugs which crept in during the last merge window - add the renameat2 syscall - fix big.LITTLE switcher initialisation checks - fix kdump vmcore for LPAE kernels" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add renameat2 syscall ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sorted ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issue ARM: 8032/1: bL_switcher: fix validation check before its activation ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo ARM: 8027/1: fix do_div() bug in big-endian systems ARM: 8026/1: Fix emulation of multiply accumulate instructions ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted
2014-04-23Merge branch 'for-linus' of ↵Linus Torvalds12-151/+263
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The main change is that we now publish "firmware ID" for the serio devices to help userspace figure out the kind of touchpads it is dealing with: i8042 will export PS/2 port's PNP IDs as firmware IDs. You will also get more quirks for Synaptics touchpads in various Lenovo laptops, a change to elantech driver to recognize even more models, and fixups to wacom and couple other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add support for newer elantech touchpads Input: soc_button_array - fix a crash during rmmod Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1 Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property Input: Add INPUT_PROP_TOPBUTTONPAD device property Input: i8042 - add firmware_id support Input: serio - add firmware_id sysfs attribute Input: wacom - handle 1024 pressure levels in wacom_tpc_pen Input: wacom - references to 'wacom->data' should use 'unsigned char*' Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE Input: wacom - use full 32-bit HID Usage value in switch statement Input: wacom - missed the last bit of expresskey for DTU-1031 Input: ads7846 - fix device usage within attribute show Input: da9055_onkey - remove use of regmap_irq_get_virq()
2014-04-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds7-68/+120
Pull radeon drm fixes from Dave Airlie: "This is just radeon fixes, primarily the two pll fix and the aux fix, it also disables dpm on rv770 gpus, fixes driver reloading, and fixes two issues with runtime PM on some GPUS" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't allow runpm=1 on systems with out ATPX drm/radeon: fix ATPX detection on non-VGA GPUs drm/radeon/pm: don't walk the crtc list before it has been initialized (v2) drm/radeon: properly unregister hwmon interface (v2) drm/radeon: fix count in cik_sdma_ring_test() drm/radeon/aux: fix hpd assignment for aux bus drm/radeon: improve PLL limit handling in post div calculation drm/radeon: use fixed PPL ref divider if needed drm/radeon: disable dpm on rv770 by default
2014-04-23arm: dma-mapping: Fix mapping size valueRitesh Harjani1-1/+1
68efd7d2fb("arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()") is causing kernel panic because it wrongly sets the value of mapping->size: Unable to handle kernel NULL pointer dereference at virtual address 000000a0 pgd = e7a84000 [000000a0] *pgd=00000000 ... PC is at bitmap_clear+0x48/0xd0 LR is at __iommu_remove_mapping+0x130/0x164 Fix it by correcting mapping->size value. Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-04-23ARM: add renameat2 syscallMiklos Szeredi2-0/+2
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> [dropped arch/arm/include/asm/unistd.h changes --rmk] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sortedRussell King2-9/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23Input: elantech - add support for newer elantech touchpadsJordan Rife1-0/+1
Newer elantech touchpads are not recognized by the current driver, since it fails to detect their firmware version number. This prevents more advanced touchpad features from being usable such as two-finger scrolling. This patch allows newer touchpads to be detected and be fully functional. Tested on Sony Vaio SVF13N17PXB. Signed-off-by: Jordan Rife <jrife0@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-23Input: soc_button_array - fix a crash during rmmodLejun Zhu1-0/+1
When the system has zero or one button available, trying to rmmod soc_button_array will cause crash. Fix this by properly handling -ENODEV in probe(). Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-23Merge branch 'drm-fixes-3.15' of ↵Dave Airlie7-68/+120
git://people.freedesktop.org/~deathsimple/linux into drm-next 1. Further PLL parameter fixes. 2. Fixes for HPD on DP 3. Could of different PM fixes 4. Disabling DPM on RV770 * 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: don't allow runpm=1 on systems with out ATPX drm/radeon: fix ATPX detection on non-VGA GPUs drm/radeon/pm: don't walk the crtc list before it has been initialized (v2) drm/radeon: properly unregister hwmon interface (v2) drm/radeon: fix count in cik_sdma_ring_test() drm/radeon/aux: fix hpd assignment for aux bus drm/radeon: improve PLL limit handling in post div calculation drm/radeon: use fixed PPL ref divider if needed drm/radeon: disable dpm on rv770 by default
2014-04-23ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issueVictor Kamensky1-1/+1
Fix e26a9e00afc482b971afcaef1db8c9034d4d6d7c 'ARM: Better virt_to_page() handling' replaced __pv_phys_offset with __pv_phys_pfn_offset. Also note that size of __pv_phys_offset was quad but size of __pv_phys_pfn_offset is word. Instruction that used to update __pv_phys_offset which address is in r6 had to update low word of __pv_phys_offset so it used #LOW_OFFSET macro for store offset. Now when size of __pv_phys_pfn_offset is word, no difference between little endian and big endian should exist - i.e no offset should be used when __pv_phys_pfn_offset is stored. Note that for little endian image proposed change is noop, since in little endian case #LOW_OFFSET is defined 0 anyway. Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23ARM: 8032/1: bL_switcher: fix validation check before its activationNicolas Pitre3-4/+14
The switcher should not depend on MAX_CLUSTER to determine ifit should be activated or not. In a multiplatform kernel binary it is possible to have dual-cluster and quad-cluster platforms configured in. In that case MAX_CLUSTER which is a build time limit should be 4 and that shouldn't prevent the switcher from working if the kernel is booted on a b.L dual-cluster system. In bL_switcher_halve_cpus() we already have a runtime validation check to make sure we're dealing with only two clusters, so booting on a quad cluster system will be caught and switcher activation aborted. However, the b.L switcher must ensure the MCPM layer is initialized on the booted hardware before doing anything. The mcpm_is_available() function is added to that effect. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Abhilash Kesavan <kesavan.abhilash@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfoLiu Hua1-0/+7
For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Cc: <stable@vger.kernel.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23ARM: 8027/1: fix do_div() bug in big-endian systemsXiangyu Lu1-1/+1
In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: <stable@vger.kernel.org> # 2.6.20+ Signed-off-by: Alex Wu <wuquanming@huawei.com> Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23mm: make fixup_user_fault() check the vma access rights tooLinus Torvalds1-0/+5
fixup_user_fault() is used by the futex code when the direct user access fails, and the futex code wants it to either map in the page in a usable form or return an error. It relied on handle_mm_fault() to map the page, and correctly checked the error return from that, but while that does map the page, it doesn't actually guarantee that the page will be mapped with sufficient permissions to be then accessed. So do the appropriate tests of the vma access rights by hand. [ Side note: arguably handle_mm_fault() could just do that itself, but we have traditionally done it in the caller, because some callers - notably get_user_pages() - have been able to access pages even when they are mapped with PROT_NONE. Maybe we should re-visit that design decision, but in the meantime this is the minimal patch. ] Found by Dave Jones running his trinity tool. Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-22Merge tag 'gpio-v3.15-2' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "A small batch of GPIO fixes for the v3.15 series. I expect more to come in but I'm a bit behind on mail, might as well get these to you right now: - Change a crucial semantic ordering in the GPIO irqchip helpers - Fix two nasty regressions in the ACPI gpiolib extensions" * tag 'gpio-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio / ACPI: Prevent potential wrap of GPIO value on OpRegion read gpio / ACPI: Don't crash on NULL chip->dev gpio: set data first, then chip and handler
2014-04-22Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds1-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso fix from Peter Anvin: "This is a single build fix for building with gold as opposed to GNU ld. It got queued up separately and was expected to be pushed during the merge window, but it got left behind" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Make the vdso linker script compatible with Gold
2014-04-22drm/radeon: don't allow runpm=1 on systems with out ATPXAlex Deucher1-5/+3
vgaswitcheroo and the ATPX ACPI methods are required to power down the dGPU. bug: https://bugzilla.kernel.org/show_bug.cgi?id=73901 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-22drm/radeon: fix ATPX detection on non-VGA GPUsAlex Deucher1-0/+7
Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: airlied@gmail.com
2014-04-22drm/radeon/pm: don't walk the crtc list before it has been initialized (v2)Alex Deucher2-28/+35
Avoids a crash in certain cases when thermal irqs are generated before the display structures have been initialized. v2: fix the vblank and vrefresh helpers as well bug: https://bugzilla.kernel.org/show_bug.cgi?id=73931 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-22drm/radeon: properly unregister hwmon interface (v2)Alex Deucher1-6/+15
Need to properly unregister the hwmon device on driver unload. v2: minor clean up bug: https://bugzilla.kernel.org/show_bug.cgi?id=73931 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-22drm/radeon: fix count in cik_sdma_ring_test()Alex Deucher1-1/+1
Should be 5 rather than 4. Noticed-by: Mathias Fröhlich <Mathias.Froehlich@gmx.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-22drm/radeon/aux: fix hpd assignment for aux busAlex Deucher1-0/+1
The hpd (hot plug detect) pin assignment got lost in the conversion to to the common i2c over aux code. Without this information, aux transactions do not work properly. Fixes DP failures. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds5-297/+84
Pull UML fixes from Richard Weinberger: "Assorted fixes for UML" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Memory corruption on startup um: Missing pipe handling uml: Simplify tempdir logic.
2014-04-21Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds14-137/+188
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "These are regression and bug fixes for ext4. We had a number of new features in ext4 during this merge window (ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so there were many more regression and bug fixes this time around. It didn't help that xfstests hadn't been fully updated to fully stress test COLLAPSE_RANGE until after -rc1" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits) ext4: disable COLLAPSE_RANGE for bigalloc ext4: fix COLLAPSE_RANGE failure with 1KB block size ext4: use EINVAL if not a regular file in ext4_collapse_range() ext4: enforce we are operating on a regular file in ext4_zero_range() ext4: fix extent merging in ext4_ext_shift_path_extents() ext4: discard preallocations after removing space ext4: no need to truncate pagecache twice in collapse range ext4: fix removing status extents in ext4_collapse_range() ext4: use filemap_write_and_wait_range() correctly in collapse range ext4: use truncate_pagecache() in collapse range ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled ext4: always check ext4_ext_find_extent result ext4: fix error handling in ext4_ext_shift_extents ext4: silence sparse check warning for function ext4_trim_extent ext4: COLLAPSE_RANGE only works on extent-based files ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches ext4: use i_size_read in ext4_unaligned_aio() fs: disallow all fallocate operation on active swapfile fs: move falloc collapse range check into the filesystem methods ...
2014-04-21um: Memory corruption on startupAnton Ivanov3-0/+8
The reverse case of this race (you must msync before read) is well known. This is the not so common one. It can be triggered only on systems which do a lot of task switching and only at UML startup. If you are starting 200+ UMLs ~ 0.5% will always die without this fix. Signed-off-by: Anton Ivanov <antivano@cisco.com> [rw: minor whitespace fixes] Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-21um: Missing pipe handlingAnton Ivanov1-0/+1
UML does not handle sigpipe. As a result when running it under expect or redirecting the IO from the console to an external program it will crash if the program stops or exits. Signed-off-by: Anton Ivanov <antivano@cisco.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-21uml: Simplify tempdir logic.Tristan Schmelcher1-297/+75
Inferring the mount hierarchy correctly from /proc/mounts is hard when MS_MOVE may have been used, and the previous code did it wrongly. This change simplifies the logic to only require that /dev/shm be _on_ tmpfs (which can be checked trivially with statfs) rather than that it be a _mountpoint_ of tmpfs, since there isn't a compelling reason to be that strict. We also now check for tmpfs on whatever directory we ultimately use so that the user is better informed. This change also moves the more standard TMPDIR environment variable check ahead of the others. Applies to 3.12. Signed-off-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-20Linux 3.15-rc2v3.15-rc2Linus Torvalds1-1/+1
2014-04-20Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds5-6/+18
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling
2014-04-20Merge tag 'iommu-fixes-v3.15-rc1' of ↵Linus Torvalds3-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea46
2014-04-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
2014-04-20drm/radeon: improve PLL limit handling in post div calculationChristian König1-26/+51
This improves the PLL parameters when we work at the limits of the allowed ranges. Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar4-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-20Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga ↵Hans de Goede1-0/+42
and X1 We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: synaptics - report INPUT_PROP_TOPBUTTONPAD propertyHans de Goede1-2/+53
Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD property for for touchpads with top button areas. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: Add INPUT_PROP_TOPBUTTONPAD device propertyHans de Goede1-0/+1
On some newer laptops with a trackpoint the physical buttons for the trackpoint have been removed to allow for a larger touchpad. On these laptops the buttonpad has clearly marked areas on the top which are to be used as trackpad buttons. Users of the event device-node need to know about this, so that they can properly interpret BTN_LEFT events as being a left / right / middle click depending on where on the button pad the clicking finger is. This commits adds a INPUT_PROP_TOPBUTTONPAD device property which drivers for such buttonpads will use to signal to the user that this buttonpad not only has the normal bottom button area, but also a top button area. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: i8042 - add firmware_id supportHans de Goede2-0/+21
Fill in the new serio firmware_id sysfs attribute for pnp instantiated 8042 serio ports. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: serio - add firmware_id sysfs attributeHans de Goede2-0/+15
serio devices exposed via platform firmware interfaces such as ACPI may provide additional identifying information of use to userspace. We don't associate the serio devices with the firmware device (we don't set it as parent), so there's no way for userspace to make use of this information. We cannot change the parent for serio devices instantiated though a firmware interface as that would break suspend / resume ordering. Therefore this patch adds a new firmware_id sysfs attribute so that userspace can get a string from there with any additional identifying information the firmware interface may provide. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20perf tools: Improve error reportingAdrien BAK2-2/+9
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf tools: Adjust symbols in VDSOVladimir Nikulichev1-0/+2
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvs Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf kvm: Fix 'Min time' counting in report commandAlexander Yarygin1-0/+1
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20Input: wacom - handle 1024 pressure levels in wacom_tpc_penJason Gerecke1-1/+1
Some tablet PC sensors (e.g. the 0xEC found in the Thinkpad Yoga) report more than 256 pressure levels and will experience wraparound unless the full range is read. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - references to 'wacom->data' should use 'unsigned char*'Jason Gerecke1-18/+9
'wacom->data' contains raw binary data and can lead to unexpected behavior if a byte under examination happens to have its MSB set. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSUREJason Gerecke1-0/+9
The 0xEC sensor is used in multiple tablet PCs and curiously has versions that report 256 levels of pressure (Samsung Slate 7) as well as versions that report 1024 levels (Lenovo Thinkpad Yoga). To allow both versions to work properly, we allow the value of HID_USAGE_PRESSURE reported to override pressure_max. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - use full 32-bit HID Usage value in switch statementJason Gerecke1-128/+109
A HID Usage is a 32-bit value: an upper 16-bit "page" and a lower 16-bit ID. While the two halves are normally reported seperately, only the combination uniquely idenfifes a particular HID Usage. The existing code performs the comparison in two steps, first performing a switch on the ID and then verifying the page within each case. While this works fine, it is very akward to handle two Usages that share a single ID, such as HID_USAGE_PRESSURE and HID_USAGE_X because the case statement can only have a single identifier. To work around this, we now check the full 32-bit HID Usage directly rather than first checking the ID and then the page. This allows the switch statement to have distinct cases for e.g. HID_USAGE_PRESSURE and HID_USAGE_X. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: wacom - missed the last bit of expresskey for DTU-1031Ping Cheng1-1/+1
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: ads7846 - fix device usage within attribute showAlexander Stein1-1/+1
With commit e585c40ba (Input: ads7846 - convert to hwmon_device_register_with_groups()) the device passed to the attribute's show function isn't the spi device as before. So fixup the passed device to ads7846_read12_ser. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-20Input: da9055_onkey - remove use of regmap_irq_get_virq()Adam Thomson1-1/+0
Using platform_get_irq_byname() to retrieve the IRQ number returns the VIRQ number rather than the local IRQ number for the device. Passing that value then into regmap_irq_get_virq() causes a failure because the function is expecting the local IRQ number (e.g. 0, 1, 2, 3, etc). This patch removes use of regmap_irq_get_virq() to prevent this failure from happening. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-29 07:49:10 +0300