summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-05-25mISDN: Reduce stack size in dsp_cmx_send()Frank Seidel2-2/+3
Reduce stack size memory footprint of mISDN_dsp. (From 1468 bytes for dsp_cmx_send on i386 down to 44). Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Echo canceler now gets delay information from hardwareAndreas Eversberg10-41/+60
Added tx-fifo information for calculation of current delay to sync tx and rx streams for echo canceler. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: DSP now uses ring buffer for echo cancelerAndreas Eversberg2-1/+3
DSP now uses ring buffer for echo canceler. Added missing include in l1oip_codec.c Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mISDN: Add watchdog functionality to hfcmulti driverAndreas Eversberg3-2/+34
This patch was made by Titus Moldovan and provides IOCTL functions for enabling and disabling the controller's built in watchdog. The use is optional. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25skbuff: Copy csum instead of csum_start/csum_offsetHerbert Xu1-2/+1
Hi: skbuff: Copy csum instead of csum_start/csum_offset It's easier to copy the u32 csum instead of its two u16 constituents. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25skbuff: Move new code into __copy_skb_headerHerbert Xu1-5/+9
Hi: skbuff: Move new __skb_clone code into __copy_skb_header It seems that people just keep on adding stuff to __skb_clone instead __copy_skb_header. This is wrong as it means your brand-new attributes won't always get copied as you intended. This patch moves them to the right place, and adds a comment to prevent this from happening again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25Merge branch 'master' of ↵David S. Miller124-1745/+13213
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-05-25myri10ge: Add support for vlan_featuresBrice Goglin1-1/+7
Add support for netdev->vlan_features in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25myri10ge: drop myri10ge_lro module parameterBrice Goglin1-6/+1
Drop the myri10ge_lro module parameter now that we have ethtool to enable/disable LRO in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25myri10ge: fix the invokation of lro_flush_allBrice Goglin1-1/+2
Fix the way we check whether lro_flush_all should be called in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mlx4_en: Fix partial rings featureYevgeny Petrilin3-39/+58
In case of allocation failure, the actual ring size is rounded down to nearest power of 2. The remaining descriptors are freed. The CQ and SRQ are allocated with the actual size and the mask is updated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mlx4_en: Removed redundant stride variableYevgeny Petrilin1-3/+0
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22iwlwifi: check for valid band for channel infoWey-Yi Guy1-38/+41
when display channel info in debugfs, always check for valid band before access the pointer and display information for 1000 NIC, it only support "bgn" mode, so there is no 5.2GHz channels available to display. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlagn: co-exist with AMTMohamed Abbas3-4/+60
Enable using iwlwifi driver in AMT system. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Set rb_timeout to 0x10 for devices with ICTMohamed Abbas1-1/+4
rb value should be 0x10 for devices using ICT. RX interrupt was not performing well with 0 value Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Add support for periodic RX interruptMohamed Abbas5-13/+46
Periodic RX interrupt needed with ICT interrupt to prevent RX race. Sending RX interrupt require many steps to be done in the the device: 1- write interrupt to current index in ICT table. 2- dma RX frame. 3- update RX shared data to indicate last write index. 4- send interrupt. This could lead to RX race, driver could receive RX interrupt but the shared data changes does not reflect that. this could lead to RX race, RX periodic will solve this race Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: Allow skb allocation from tasklet.Mohamed Abbas4-10/+34
If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: support ICT interruptMohamed Abbas9-12/+483
Add ICT interrupt handler support, ICT should improve CPU utilization since it does not require target read which is very expensive. This interrupt handler only added to 5000 cards and newer. Device will write interrupts to ICT shared table to inform driver about its interrupts. These patches will not touch 3945 and 4965 interrupt handlers and tasklet. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support "pure 40MHz" in RXON commandWey-Yi Guy4-43/+72
Fix the bug when using 11n "pure 40MHz" mode cause uCode crashing by adding support for "pure 40MHz" in RX_ON command flag. the "mode" field (bits 25:26) has value of 0-3 0 = 20 MHz only 1 = 40MHz only 2 = Mixed 3 = Reserved Control Channel ID (bit 22) is valid only in Mixed mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: report the rate index as an MCS rate numberWey-Yi Guy1-4/+27
If transmit in HT rate, report the rate index as an MCS rate number instead of an index. so "iw" can display correct BitRate Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlcore: register locksMohamed Abbas12-524/+203
Add new lock to be used when accessing some registers. Also move the register lock and iwl_grab_nic_access inside the function for register access. This will prevent from forgetting to hold locks and nic access in the right way and make code easier to maintain. We over use the priv->lock spin lock and I guess we need to add new one for Tx queue after that we might need to change most of these lock to BH and just keep priv->lock as irq type. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: support NVM access (EEPROM/OTP)Wey-Yi Guy7-27/+161
Two type of NVM available for devices 1000, 6000 and after, adding support to read OTP lower blocks if OTP is used instead of EEPROM. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rt2x00: Remove usage of IEEE80211_CONF_CHANGE_BEACON_INTERVALIvo van Doorn8-112/+42
IEEE80211_CONF_CHANGE_BEACON_INTERVAL was deprecated a month ago, it is about time to remove all usage from the rt2x00 drivers and use the correct beacon interval configuration through the bss_info structure. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rt2x00: Add new rt2800usb USB ID's for SweexIvo van Doorn1-2/+4
The USB ID with unknown manufacturer is apparently sweex, copy it to the correct location of the list and add 2 additional USB ID's also belonging to Sweex. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: do not try to restore wpa keys using add_wep_key()Jussi Kivilinna1-2/+6
set_infra_mode() tried to restore wpa keys using add_wep_key(). This never worked so prevent driver from trying. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: split add_wpa_key from rndis_iw_set_encode_extJussi Kivilinna1-53/+76
Split add_wpa_key() from rndis_iw_set_encode_ext so that conversion to cfg80211 would be easier later on. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: explain bits used in key setup code.Jussi Kivilinna1-5/+18
Driver uses some unnamed bits to control encryption setup. Move these to enumerations with proper names explaining their meaning. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: remove CAP_SUPPORT_TXPOWER/OID_802_11_TX_POWER_LEVEL codeJussi Kivilinna1-38/+8
BCM4320 doesn't support OID_802_11_TX_POWER_LEVEL (chip implements the command but setting value has no effect and getting txpower value always returns 0xff, full power). So remove the code for cleanup. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22rndis_wlan: fix support for bcm4320aJussi Kivilinna1-4/+14
Old variant of bcm4320 doesn't handle setting configuration parameters correctly. One symptom is that MAC gets partially overwritten when any config parameters are set. This patch disables config-params for bcm4320a (and generic rndis-wlan). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: Temperature sensor voltage reading for 5150Wey-Yi Guy5-35/+131
The temperature measurement by uCode for 5150 and 5000 are different CSR_HW_REV_TYPE_5150: temperature sensor output voltage CSR_HW_REV_TYPE_5000: temperature in Celsius temperature related operation for 5150 is measured by temperature sensor output voltage; additional conversion is required for set and store the temperature. To make sure support different HW design; implement _ops method for temperature related functions (temperature reading and set ct kill threshold) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwlwifi: add Greenfield support for 11nWey-Yi Guy1-14/+20
Add "Greenfield" support for all devices except 4965 and 3945. "Greenfield" is part of 11n features to improve HT performance. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwl3945: improve 3945 ledsAbhijeet Kolekar1-24/+46
'tpt' is a delta throughput (number of packets) and is corelated to brightness of the LED. We already maintain a delta of packets in rxtxpackets. There is no need to calculate this delta again which was affecting the behaviour of LEDS. Also add two new callback functions for ASSOCIATED/DISASSOCIATED states where LED's will be *on* for associated state and *off* for disassociated state. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1771. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: read SD8688 firmware status from new registerBing Zhao2-8/+28
The scratch pad register is used to store firmware status after firmware is downloaded and initialized. After firmware status is verified OK, the same register is used to store RX packet length. Hence the firmware status code is no longer valid afterwards. SD8688 firmware introduces a new register for firmware status which will never be overwritten. Also add scratch_reg variable to if_sdio_card structure and initialize it based on the model of the card during probe. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driverZhu Yi29-0/+9713
This driver supports Intel's full MAC wireless multicomm 802.11 hardware. Although the hardware is a 802.11agn device, we currently only support 802.11ag, in managed and ad-hoc mode (no AP mode for now). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22wireless: move some utility functions from mac80211 to cfg80211Zhu Yi14-230/+375
The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22mac80211: correct probe wait timeJohannes Berg1-1/+1
My first patch submission used 200ms, which I then somehow managed to revert back to the earlier 50ms I had used for some tests in the second patch submission -- but that was wrong, I should have used 200ms here. Correct that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22ath9k: Update Beacon timers based on timestamp from the APJouni Malinen3-1/+16
Some APs seem to drift away from the expected TBTT (timestamp % beacon_int_in_usec differs quite a bit from zero) which can result in us waking up way too early to receive a Beacon frame. In order to work around this, re-configure the Beacon timers after having received a Beacon frame from the AP (i.e., when we know the offset between the expected TBTT and the actual time the AP is sending out the Beacon frame). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22ath9k: Optimize TBTT/DTIM calculation for timersJouni Malinen1-7/+21
The previous version used a simple loop to go through all Beacon frames when determining the next TBTT and DTIM count. This is not too bad for the case where the setup happens before timesync (i.e., very small TSF), but this can become very heavy operation if a short Beacon interval is used and the current TSF is large. In preparation for a patch to update timer setup based on Beacon timestamp, optimize this routine to take fixed time regardless of the actual TSF value. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: implement function init/shutdown commands for SD8688Bing Zhao4-3/+62
SD8688 is a WLAN/Bluetooth combo chip and both functions are supported in a single firmware image. FUNC_INIT and FUNC_SHUTDOWN commands are implemented to utilize the multiple function feature. When SD8688 card is inserted, the firmware image should be downloaded only once through either WLAN function (Libertas driver) or Bluetooth function (Bluetooth driver). This patch adds function init/shutdown for SD8688 WLAN function only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: get SD8688 rx length with one CMD52Bing Zhao2-2/+58
Usually, the 16-bit rx length is read from scratch pad registers with two CMD52 transactions: SD8385: IF_SDIO_SCRATCH_OLD (0x80fe/0x80ff) SD8686/SD8688: IF_SDIO_SCRATCH (0x34/0x35) Alternatively, SD8688 firmware offers an enhanced method for driver to read an 8-bit rx length (in units) with a single CMD52: IF_SDIO_RX_UNIT 0x43 is read one time after firmware is ready. IF_SDIO_RX_LEN 0x42 is read every time when rx interrupt is received. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: define macros for SDIO model numbersBing Zhao2-9/+13
replace direct usages of SDIO model numbers with defined macros. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: fix GSPI card event handlingandrey@cozybit.com1-0/+7
The GPSI interface driver does not re-enable the Card Event Interrupt, which causes problems after a card event (for example: link-loss) comes in. This can lead, for example, to the card failing to re-associate. This patch ensures that we re-enable the Card Event Interrupt when we handle card events. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22mac80211: fix probe response wait timingJohannes Berg1-4/+5
In "mac80211: split out and decrease probe wait time" I tried to reduce the time waiting for a probe response, but failed to take into account the case where we are detecting beacon loss in software -- in that case we still wait the monitoring time rather than the probe wait time. Fix this by refactoring the mod_timer() calls in ieee80211_associated(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22wext: remove atomic requirement for wireless statsJohannes Berg1-5/+27
The requirement for wireless stats to be atomic is now mostly artificial since we hold the rtnl _and_ the dev_base_lock for iterating the device list. Doing that is not required, just the rtnl is sufficient (and the rtnl is required for other reasons outlined in commit "wext: fix get_wireless_stats locking"). This will fix http://bugzilla.kernel.org/show_bug.cgi?id=13344 and make things easier for drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22tcp: Unexport TCPv6 GRO functionsHerbert Xu1-4/+3
Sinec the TCPv6 GRO functions are used in the same file where they are defined, we do not need to export them. This was a cut-n-paste from the IPv4 code which does need to export them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22net: Fix arg to trace_napi_poll() in netpoll.David S. Miller1-1/+1
Reproted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22ixgbe: only register DCA requester onceAlexander Duyck1-20/+4
The current driver tries to re-register the DCA requester after reset and this is not correct. This change makes it so all we are doing is resetting the DCA registers after reset and not re-adding the requester. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22igb: do not re-register DCA requester on device resetAlexander Duyck1-3/+9
The current driver is re-registering the DCA requester after every reset. Instead of doing this we should only be updating the on board DCA registers and not unregistering/re-registering our requester. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22wireless: Use genl_register_family_with_ops()Michał Mirosław1-8/+3
Use genl_register_family_with_ops() instead of a copy. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22netlabel: Use genl_register_family_with_ops()Michał Mirosław3-42/+6
Use genl_register_family_with_ops() instead of a copy. This fixes genetlink family leak on error path. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 22:17:20 +0300