summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-22Linux 4.15.5v4.15.5Greg Kroah-Hartman1-1/+1
2018-02-22mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardbyinbo.zhu1-4/+8
commit f2bc600008bd6f7f5d0b6b56238d14f95cd454d2 upstream. When system wakes up from sleep on ls1046ardb, the SD operation fails with mmc error messages since ESDHC_TB_EN bit couldn't be cleaned by eSDHC_SYSCTL[RSTA]. It's proper to clean this bit in esdhc_reset() rather than in probe. Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexecyinbo.zhu1-0/+4
commit 97618aca1440b5addc5c3d78659d3e176be23b80 upstream. The bit eSDHC_TBCTL[TB_EN] couldn't be reset by eSDHC_SYSCTL[RSTA] which is used to reset for all. The driver should make sure it's cleared before card initialization, otherwise the initialization would fail. Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22media: r820t: fix r820t_write_reg for KASANArnd Bergmann1-5/+8
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream. With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ARM: dts: Delete bogus reference to the charlcdLinus Walleij1-5/+0
commit 586b2a4befad88cd87b372a1cea01e58c6811ea9 upstream. The EB MP board probably has a character LCD but the board manual does not really state which IRQ it has assigned to this device. The invalid assignment was a mistake by me during submission of the DTSI where I was looking for the reference, didn't find it and didn't fill it in. Delete this for now: it can probably be fixed but that requires access to the actual board for some trial-and-error experiments. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22arm: dts: mt2701: Add reset-cellsMatthias Brugger1-0/+2
commit ae72e95b5e4ded145bfc6926ad9457b74e3af41a upstream. The hifsys and ethsys needs the definition of the reset-cells property. Fix this. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22arm: dts: mt7623: Update ethsys bindingMatthias Brugger1-0/+1
commit 76a09ce214addb8ddc0f6d50dc1106a5f829e713 upstream. The ethsys binding misses the reset-cells, this patch adds this property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ARM: dts: s5pv210: add interrupt-parent for ohciArnd Bergmann1-0/+1
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream. The ohci-hcd node has an interrupt number but no interrupt-parent, leading to a warning with current dtc versions: arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 As seen from the related exynos dts files, the ohci and ehci controllers always share one interrupt number, and the number is the same here as well, so setting the same interrupt-parent is the reasonable solution here. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22arm64: dts: msm8916: Add missing #phy-cellsBjorn Andersson1-0/+1
commit b0ab681285aa66064f2de5b74191c0cabba381ff upstream. Add a missing #phy-cells to the dsi-phy, to silence dtc warning. Cc: Archit Taneja <architt@codeaurora.org> Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ARM: pxa/tosa-bt: add MODULE_LICENSE tagArnd Bergmann1-0/+4
commit 3343647813fdf0f2409fbf5816ee3e0622168079 upstream. Without this tag, we get a build warning: WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o For completeness, I'm also adding author and description fields. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ARM: dts: exynos: fix RTC interrupt for exynos5410Arnd Bergmann1-1/+0
commit 5628a8ca14149ba4226e3bdce3a04c3b688435ad upstream. According to the comment added to exynos_dt_pmu_match[] in commit 8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"), the RTC is not able to wake up the system through the PMU on Exynos5410, unlike Exynos5420. However, when the RTC DT node got added, it was a straight copy of the Exynos5420 node, which now causes a warning from dtc. This removes the incorrect interrupt-parent, which should get the interrupt working and avoid the warning. Fixes: e1e146b1b062 ("ARM: dts: exynos: Add RTC and I2C to Exynos5410") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pagesTony Luck5-18/+26
commit fd0e786d9d09024f67bd71ec094b110237dc3840 upstream. In the following commit: ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") ... we added code to memory_failure() to unmap the page from the kernel 1:1 virtual address space to avoid speculative access to the page logging additional errors. But memory_failure() may not always succeed in taking the page offline, especially if the page belongs to the kernel. This can happen if there are too many corrected errors on a page and either mcelog(8) or drivers/ras/cec.c asks to take a page offline. Since we remove the 1:1 mapping early in memory_failure(), we can end up with the page unmapped, but still in use. On the next access the kernel crashes :-( There are also various debug paths that call memory_failure() to simulate occurrence of an error. Since there is no actual error in memory, we don't need to map out the page for those cases. Revert most of the previous attempt and keep the solution local to arch/x86/kernel/cpu/mcheck/mce.c. Unmap the page only when: 1) there is a real error 2) memory_failure() succeeds. All of this only applies to 64-bit systems. 32-bit kernel doesn't map all of memory into kernel space. It isn't worth adding the code to unmap the piece that is mapped because nobody would run a 32-bit kernel on a machine that has recoverable machine checks. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert (Persistent Memory) <elliott@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org #v4.14 Fixes: ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORTJames Hogan2-8/+8
commit ec897569ad7dbc6d595873a487c3fac23f463f76 upstream. Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is conditional upon USB && USB_SUPPORT, so that it can be freely selected by platform Kconfig symbols in architecture code. For example once the MIPS_GENERIC platform selects are fixed in commit 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS 32r6_defconfig warns like so: warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB) Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-usb@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Patchwork: https://patchwork.linux-mips.org/patch/18559/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22mvpp2: fix multicast address filterMikulas Patocka1-3/+8
commit 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: seq: Fix racy pool initializationsTakashi Iwai1-2/+6
commit d15d662e89fc667b90cd294b0eb45694e33144da upstream. ALSA sequencer core initializes the event pool on demand by invoking snd_seq_pool_init() when the first write happens and the pool is empty. Meanwhile user can reset the pool size manually via ioctl concurrently, and this may lead to UAF or out-of-bound accesses since the function tries to vmalloc / vfree the buffer. A simple fix is to just wrap the snd_seq_pool_init() call with the recently introduced client->ioctl_mutex; as the calls for snd_seq_pool_init() from other side are always protected with this mutex, we can avoid the race. Reported-by: 范龙飞 <long7573@126.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: usb: add more device quirks for USB DSD devicesDaniel Mack1-2/+5
commit 7c74866baef1827e18f8269aec85030063520bd4 upstream. Add some more devices that need quirks to handle DSD modes correctly. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-and-tested-by: Thomas Gresens <tgresens@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204Lassi Ylikojola1-0/+9
commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 upstream. Add quirk to ensure a sync endpoint is properly configured. This patch is a fix for same symptoms on Behringer UFX1204 as patch from Albertto Aquirre on Dec 8 2016 for Axe-Fx II. Signed-off-by: Lassi Ylikojola <lassi.ylikojola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: hda/realtek: PCI quirk for Fujitsu U7x7Jan-Marek Glogowski1-0/+19
commit fdcc968a3b290407bcba9d4c90e2fba6d8d928f1 upstream. These laptops have a combined jack to attach headsets, the U727 on the left, the U757 on the right, but a headsets microphone doesn't work. Using hdajacksensetest I found that pin 0x19 changed the present state when plugging the headset, in addition to 0x21, but didn't have the correct configuration (shown as "Not connected"). So this sets the configuration to the same values as the headphone pin 0x21 except for the device type microphone, which makes it work correctly. With the patch the configured pins for U727 are Pin 0x12 (Internal Mic, Mobile-In): present = No Pin 0x14 (Internal Speaker): present = No Pin 0x19 (Black Mic, Left side): present = No Pin 0x1d (Internal Aux): present = No Pin 0x21 (Black Headphone, Left side): present = No Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platformKailang Yang1-0/+42
commit 61fcf8ece9b6b09450250c4ca40cc3b81a96a68d upstream. Thinkpad Dock device support for ALC298 platform. It need to use SSID for the quirk table. Because IdeaPad also has ALC298 platform. Use verb for the quirk table will confuse. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: hda/realtek - Add headset mode support for Dell laptopKailang Yang1-0/+2
commit 40e2c4e5a7efcd50983aacbddd3c617e776018bf upstream. This platform had two Dmic and single Dmic. This update was for single Dmic. This commit was for two Dmic. Fixes: 75ee94b20b46 ("ALSA: hda - fix headset mic problem for Dell machines...") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attributeKirill Marinushkin1-7/+11
commit 447cae58cecd69392b74a4a42cd0ab9cabd816af upstream. The layout of the UAC2 Control request and response varies depending on the request type. With the current implementation, only the Layout 2 Parameter Block (with the 2-byte sized RANGE attribute) is handled properly. For the Control requests with the 1-byte sized RANGE attribute (Bass Control, Mid Control, Tremble Control), the response is parsed incorrectly. This commit: * fixes the wLength field value in the request * fixes parsing the range values from the response Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ALSA: hda - Fix headset mic detection problem for two Dell machinesHui Wang1-0/+9
commit 3f2f7c553d077be6a30cb96b2976a2c940bf5335 upstream. One of them has the codec of alc256 and the other one has the codec of alc289. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22mtd: nand: vf610: set correct ooblayoutStefan Agner1-4/+2
commit ea56fb282368ea08c2a313af6b55cb597aec4db1 upstream. With commit 3cf32d180227 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-229p/trans_virtio: discard zero-length replyGreg Kurz1-1/+2
commit 26d99834f89e76514076d9cd06f61e56e6a509b8 upstream. When a 9p request is successfully flushed, the server is expected to just mark it as used without sending a 9p reply (ie, without writing data into the buffer). In this case, virtqueue_get_buf() will return len == 0 and we must not report a REQ_STATUS_RCVD status to the client, otherwise the client will erroneously assume the request has not been flushed. Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix unexpected -EEXIST when creating new inodeLiu Bo1-0/+18
commit 900c9981680067573671ecc5cbfa7c5770be3a40 upstream. The highest objectid, which is assigned to new inode, is decided at the time of initializing fs roots. However, in cases where log replay gets processed, the btree which fs root owns might be changed, so we have to search it again for the highest objectid, otherwise creating new inode would end up with -EEXIST. cc: <stable@vger.kernel.org> v4.4-rc6+ Fixes: f32e48e92596 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix use-after-free on root->orphan_block_rsvLiu Bo1-13/+21
commit 1a932ef4e47984dee227834667b5ff5a334e4805 upstream. I got these from running generic/475, WARNING: CPU: 0 PID: 26384 at fs/btrfs/inode.c:3326 btrfs_orphan_commit_root+0x1ac/0x2b0 [btrfs] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: btrfs_block_rsv_release+0x1c/0x70 [btrfs] Call Trace: btrfs_orphan_release_metadata+0x9f/0x200 [btrfs] btrfs_orphan_del+0x10d/0x170 [btrfs] btrfs_setattr+0x500/0x640 [btrfs] notify_change+0x7ae/0x870 do_truncate+0xca/0x130 vfs_truncate+0x2ee/0x3d0 do_sys_truncate+0xaf/0xf0 SyS_truncate+0xe/0x10 entry_SYSCALL_64_fastpath+0x1f/0x96 The race is between btrfs_orphan_commit_root and btrfs_orphan_del, t1 t2 btrfs_orphan_commit_root btrfs_orphan_del spin_lock check (&root->orphan_inodes) root->orphan_block_rsv = NULL; spin_unlock atomic_dec(&root->orphan_inodes); access root->orphan_block_rsv Accessing root->orphan_block_rsv must be done before decreasing root->orphan_inodes. cc: <stable@vger.kernel.org> v3.12+ Fixes: 703c88e03524 ("Btrfs: fix tracking of orphan inode count") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctlyLiu Bo1-1/+1
commit e8f1bc1493855e32b7a2a019decc3c353d94daf6 upstream. This regression is introduced in commit 3d48d9810de4 ("btrfs: Handle uninitialised inode eviction"). There are two problems, a) it is ->destroy_inode() that does the final free on inode, not ->evict_inode(), b) clear_inode() must be called before ->evict_inode() returns. This could end up hitting BUG_ON(inode->i_state != (I_FREEING | I_CLEAR)); in evict() because I_CLEAR is set in clear_inode(). Fixes: commit 3d48d9810de4 ("btrfs: Handle uninitialised inode eviction") Cc: <stable@vger.kernel.org> # v4.7-rc6+ Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix extent state leak from tree logLiu Bo1-2/+3
commit 55237a5f2431a72435e3ed39e4306e973c0446b7 upstream. It's possible that btrfs_sync_log() bails out after one of the two btrfs_write_marked_extents() which convert extent state's state bit into EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY and EXTENT_NEW are searched by free_log_tree() so that those extent states with EXTENT_NEED_WAIT lead to memory leak. cc: <stable@vger.kernel.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix crash due to not cleaning up tree log block's dirty bitsLiu Bo1-0/+9
commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream. In cases that the whole fs flips into readonly status due to failures in critical sections, then log tree's blocks are still dirty, and this leads to a crash during umount time, the crash is about use-after-free, umount -> close_ctree -> stop workers -> iput(btree_inode) -> iput_final -> write_inode_now -> ... -> queue job on stop'd workers cc: <stable@vger.kernel.org> v3.12+ Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22Btrfs: fix deadlock in run_delalloc_nocowLiu Bo1-1/+4
commit e89166990f11c3f21e1649d760dd35f9e410321c upstream. @cur_offset is not set back to what it should be (@cow_start) if btrfs_next_leaf() returns something wrong, and the range [cow_start, cur_offset) remains locked forever. cc: <stable@vger.kernel.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22dm: correctly handle chained bios in dec_pending()NeilBrown1-1/+2
commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by: Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org (v3.14+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22iscsi-target: make sure to wake up sleeping login workerFlorian Westphal1-0/+3
commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream. Mike Christie reports: Starting in 4.14 iscsi logins will fail around 50% of the time. Problem appears to be that iscsi_target_sk_data_ready() callback may return without doing anything in case it finds the login work queue is still blocked in sock_recvmsg(). Nicholas Bellinger says: It would indicate users providing their own ->sk_data_ready() callback must be responsible for waking up a kthread context blocked on sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is received before the first sock_recvmsg(..., MSG_WAITALL) completes. So, do this and invoke the original data_ready() callback -- in case of tcp sockets this takes care of waking the thread. Disclaimer: I do not understand why this problem did not show up before tcp prequeue removal. (Drop WARN_ON usage - nab) Reported-by: Mike Christie <mchristi@redhat.com> Bisected-by: Mike Christie <mchristi@redhat.com> Tested-by: Mike Christie <mchristi@redhat.com> Diagnosed-by: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: e7942d0633c4 ("tcp: remove prequeue support") Signed-off-by: Florian Westphal <fw@strlen.de> Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22target/iscsi: avoid NULL dereference in CHAP auth error pathDavid Disseldorp1-1/+2
commit ce512d79d0466a604793addb6b769d12ee326822 upstream. If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then crypto_free_shash() is called with a NULL pointer which gets dereferenced in crypto_shash_tfm(). Fixes: 69110e3cedbb ("iscsi-target: Use shash and ahash") Suggested-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David Disseldorp <ddiss@suse.de> Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22blk-wbt: account flush requests correctlyJens Axboe1-1/+9
commit 5235553d821433e1f4fa720fd025d2c4b7ee9994 upstream. Mikulas reported a workload that saw bad performance, and figured out what it was due to various other types of requests being accounted as reads. Flush requests, for instance. Due to the high latency of those, we heavily throttle the writes to keep the latencies in balance. But they really should be accounted as writes. Fix this by checking the exact type of the request. If it's a read, account as a read, if it's a write or a flush, account as a write. Any other request we disregard. Previously everything would have been mistakenly accounted as reads. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22xprtrdma: Fix BUG after a device removalChuck Lever1-3/+3
commit e89e8d8fcdc6751e86ccad794b052fe67e6ad619 upstream. Michal Kalderon reports a BUG that occurs just after device removal: [ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049 [ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma] The RPC/RDMA client transport attempts to allocate some resources on demand. Registered buffers are one such resource. These are allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call and Reply messages. A hardware resource is associated with each of these buffers, as they can be used for a Send or Receive Work Request. If a device is removed from under an NFS/RDMA mount, the transport layer is responsible for releasing all hardware resources before the device can be finally unplugged. A BUG results when the NFS mount hasn't yet seen much activity: the transport tries to release resources that haven't yet been allocated. rpcrdma_free_regbuf() already checks for this case, so just move that check to cover the DEVICE_REMOVAL case as well. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22xprtrdma: Fix calculation of ri_max_send_sgesChuck Lever2-2/+2
commit 1179e2c27efe21167ec9d882b14becefba2ee990 upstream. Commit 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes a problem where xprtrdma would not work if the device's max_sge capability was small (low single digits). At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of each RPC. ri_max_send_sges is set to this value: ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES; Then when marshaling each RPC, rpcrdma_args_inline uses that value to determine whether the device has enough Send SGEs to convey an NFS WRITE payload inline, or whether instead a Read chunk is required. More recently, commit ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments") used the ri_max_send_sges value to calculate the size of an array, but that commit erroneously assumed ri_max_send_sges contains a value similar to the device's max_sge, and not one that was reduced by the minimum SGE count. This assumption results in the calculated size of the sendctx's Send SGE array to be too small. When the array is used to marshal an RPC, the code can write Send SGEs into the following sendctx element in that array, corrupting it. When the device's max_sge is large, this issue is entirely harmless; but it results in an oops in the provider's post_send method, if dev.attrs.max_sge is small. So let's straighten this out: ri_max_send_sges will now contain a value with the same meaning as dev.attrs.max_sge, which makes the code easier to understand, and enables rpcrdma_sendctx_create to calculate the size of the SGE array correctly. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22arm64: proc: Set PTE_NG for table entries to avoid traversing them twiceWill Deacon1-5/+9
commit 2ce77f6d8a9ae9ce6d80397d88bdceb84a2004cd upstream. When KASAN is enabled, the swapper page table contains many identical mappings of the zero page, which can lead to a stall during boot whilst the G -> nG code continually walks the same page table entries looking for global mappings. This patch sets the nG bit (bit 11, which is IGNORED) in table entries after processing the subtree so we can easily skip them if we see them a second time. Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22rtlwifi: rtl8821ae: Fix connection lost problem correctlyLarry Finger2-2/+4
commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream. There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75 ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by: Pkshih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22mpls, nospec: Sanitize array index in mpls_label_ok()Dan Williams1-10/+14
commit 3968523f855050b8195134da951b87c20bd66130 upstream. mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: <stable@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22tracing: Fix parsing of globs with a wildcard at the beginningSteven Rostedt (VMware)1-5/+4
commit 07234021410bbc27b7c86c18de98616c29fbe667 upstream. Al Viro reported: For substring - sure, but what about something like "*a*b" and "a*b"? AFAICS, filter_parse_regex() ends up with identical results in both cases - MATCH_GLOB and *search = "a*b". And no way for the caller to tell one from another. Testing this with the following: # cd /sys/kernel/tracing # echo '*raw*lock' > set_ftrace_filter bash: echo: write error: Invalid argument With this patch: # echo '*raw*lock' > set_ftrace_filter # cat set_ftrace_filter _raw_read_trylock _raw_write_trylock _raw_read_unlock _raw_spin_unlock _raw_write_unlock _raw_spin_trylock _raw_spin_lock _raw_write_lock _raw_read_lock Al recommended not setting the search buffer to skip the first '*' unless we know we are not using MATCH_GLOB. This implements his suggested logic. Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk Cc: stable@vger.kernel.org Fixes: 60f1d5e3bac44 ("ftrace: Support full glob matching") Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Suggsted-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22seq_file: fix incomplete reset on read from zero offsetMiklos Szeredi1-1/+4
commit cf5eebae2cd28d37581507668605f4d23cd7218d upstream. When resetting iterator on a zero offset we need to discard any data already in the buffer (count), and private state of the iterator (version). For example this bug results in first line being repeated in /proc/mounts if doing a zero size read before a non-zero size read. Reported-by: Rich Felker <dalias@libc.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: e522751d605d ("seq_file: reset iterator to first record for zero offset") Cc: <stable@vger.kernel.org> # v4.10 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22xenbus: track caller request idJoao Martins3-0/+5
commit 29fee6eed2811ff1089b30fc579a2d19d78016ab upstream. Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guestsSimon Gaiser1-0/+6
commit 781198f1f373c3e350dbeb3af04a7d4c81c1b8d7 upstream. Commit 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths") removed the check for autotranslation from {set,clear}_foreign_p2m_mapping but those are called by grant-table.c also on PVH/HVM guests. Cc: <stable@vger.kernel.org> # 4.14 Fixes: 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22rbd: whitelist RBD_FEATURE_OPERATIONS feature bitIlya Dryomov1-1/+3
commit e573427a440fd67d3f522357d7ac901d59281948 upstream. This feature bit restricts older clients from performing certain maintenance operations against an image (e.g. clone, snap create). krbd does not perform maintenance operations. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22console/dummy: leave .con_font_get set to NULLNicolas Pitre1-1/+0
commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream. When this method is set, the caller expects struct console_font fields to be properly initialized when it returns. Leave it unset otherwise nonsensical (leaked kernel stack) values are returned to user space. Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22video: fbdev: atmel_lcdfb: fix display-timings lookupJohan Hovold1-1/+7
commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent display node was also prematurely freed. Note that the display and timings node references are never put after a successful dt-initialisation so the nodes would leak on later probe deferrals and on driver unbind. Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22PCI: keystone: Fix interrupt-controller-node lookupJohan Hovold1-1/+4
commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> [lorenzo.pieralisi@arm.com: updated commit subject] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22PCI: pciehp: Assume NoCompl+ for Thunderbolt portsLukas Wunner1-0/+7
commit 493fb50e958c1c6deef7feff0b8c3855def78d75 upstream. Certain Thunderbolt 1 controllers claim to support Command Completed events (value of 0b in the No Command Completed Support field of the Slot Capabilities register) but in reality they neither set the Command Completed bit in the Slot Status register nor signal a Command Completed interrupt: 8086:1513 CV82524 [Light Ridge 4C 2010] 8086:151a DSL2310 [Eagle Ridge 2C 2011] 8086:151b CVL2510 [Light Peak 2C 2010] 8086:1547 DSL3510 [Cactus Ridge 4C 2012] 8086:1548 DSL3310 [Cactus Ridge 2C 2012] 8086:1549 DSL2210 [Port Ridge 1C 2011] All known newer chips (Redwood Ridge and onwards) set No Command Completed Support, indicating that they do not support Command Completed events. The user-visible impact is that after unplugging such a device, 2 seconds elapse until pciehp is unbound. That's because on ->remove, pcie_write_cmd() is called via pcie_disable_notification() and every call to pcie_write_cmd() takes 2 seconds (1 second for each invocation of pcie_wait_cmd()): [ 337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago) [ 340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago) That by itself has always been unpleasant, but the situation has become worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown"): Now pciehp is unbound on ->shutdown. Because Thunderbolt controllers typically have 4 hotplug ports, every reboot and shutdown is now delayed by 8 seconds, plus another 2 seconds for every attached Thunderbolt 1 device. Thunderbolt hotplug slots are not physical slots that one inserts cards into, but rather logical hotplug slots implemented in silicon. Devices appear beyond those logical slots once a PCI tunnel is established on top of the Thunderbolt Converged I/O switch. One would expect commands written to the Slot Control register to be executed immediately by the silicon, so for simplicity we always assume NoCompl+ for Thunderbolt ports. Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org # v4.12+ Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Yehezkel Bernat <yehezkel.bernat@intel.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22PCI: iproc: Fix NULL pointer dereference for BCMARay Jui3-3/+14
commit 3b65ca50d24ce33cb92d88840e289135c92b40ed upstream. With the inbound DMA mapping supported added, the iProc PCIe driver parses DT property "dma-ranges" through call to "of_pci_dma_range_parser_init()". In the case of BCMA, this results in a NULL pointer deference due to a missing of_node. Fix this by adding a guard in pcie-iproc-platform.c to only enable the inbound DMA mapping logic when DT property "dma-ranges" is present. Fixes: dd9d4e7498de3 ("PCI: iproc: Add inbound DMA mapping support") Reported-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Ray Jui <ray.jui@broadcom.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port modeDongdong Liu1-1/+1
commit deb86999323661c019ef2740eb9d479d1e526b5c upstream. HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It always advertises an MSI capability, but it can only generate MSIs when in Endpoint mode. The device has the same Vendor and Device IDs in both modes, so check the Class Code and disable MSI only when operating as a Root Port. [bhelgaas: changelog] Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-12 20:42:55 +0300