summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-05-22libceph: fix pg_temp updatesSage Weil1-1/+5
Usually, we are adding pg_temp entries or removing them. Occasionally they update. In that case, osdmap_apply_incremental() was failing because the rbtree entry already exists. Fix by removing the existing entry before inserting a new one. Fixes http://tracker.newdream.net/issues/2446 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-19libceph: avoid unregistering osd request when not registeredSage Weil1-0/+6
There is a race between two __unregister_request() callers: the reply path and the ceph_osdc_wait_request(). If we get a reply *and* the timeout expires at roughly the same time, both callers will try to unregister the request, and the second one will do bad things. Simply check if the request is still already unregistered; if so, return immediately and do nothing. Fixes http://tracker.newdream.net/issues/2420 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-19ceph: add auth buf in prepare_write_connect()Alex Elder1-9/+9
Move the addition of the authorizer buffer to a connection's out_kvec out of get_connect_authorizer() and into its caller. This way, the caller--prepare_write_connect()--can avoid adding the connect header to out_kvec before it has been fully initialized. Prior to this patch, it was possible for a connect header to be sent over the wire before the authorizer protocol or buffer length fields were initialized. An authorizer buffer associated with that header could also be queued to send only after the connection header that describes it was on the wire. Fixes http://tracker.newdream.net/issues/2424 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: rename prepare_connect_authorizer()Alex Elder1-6/+7
Change the name of prepare_connect_authorizer(). The next patch is going to make this function no longer add anything to the connection's out_kvec, so it will no longer fit the pattern of the rest of the prepare_connect_*() functions. In addition, pass the address of a variable that will hold the authorization protocol to use. Move the assignment of that to the connection's out_connect structure into prepare_write_connect(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: return pointer from prepare_connect_authorizer()Alex Elder1-9/+9
Change prepare_connect_authorizer() so it returns a pointer (or pointer-coded error). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: use info returned by get_authorizerAlex Elder4-25/+10
Rather than passing a bunch of arguments to be filled in with the content of the ceph_auth_handshake buffer now returned by the get_authorizer method, just use the returned information in the caller, and drop the unnecessary arguments. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: have get_authorizer methods return pointersAlex Elder4-21/+34
Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: ensure auth ops are defined before useAlex Elder2-13/+16
In the create_authorizer method for both the mds and osd clients, the auth_client->ops pointer is blindly dereferenced. There is no obvious guarantee that this pointer has been assigned. And furthermore, even if the ops pointer is non-null there is definitely no guarantee that the create_authorizer or destroy_authorizer methods are defined. Add checks in both routines to make sure they are defined (non-null) before use. Add similar checks in a few other spots in these files while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: reduce args to create_authorizerAlex Elder5-50/+39
Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: define ceph_auth_handshake typeAlex Elder5-41/+47
The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: check return from get_authorizerAlex Elder1-3/+7
In prepare_connect_authorizer(), a connection's get_authorizer method is called but ignores its return value. This function can return an error, so check for it and return it if that ever occurs. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: rework prepare_connect_authorizer()Alex Elder1-9/+19
Change prepare_connect_authorizer() so it returns without dropping the connection mutex if the connection has no get_authorizer method. Use the symbolic CEPH_AUTH_UNKNOWN instead of 0 when assigning authorization protocols. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: check prepare_write_connect() resultAlex Elder1-4/+12
prepare_write_connect() can return an error, but only one of its callers checks for it. All the rest are in functions that already return errors, so it should be fine to return the error if one gets returned. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: don't set WRITE_PENDING too earlyAlex Elder1-1/+5
prepare_write_connect() prepares a connect message, then sets WRITE_PENDING on the connection. Then *after* this, it calls prepare_connect_authorizer(), which updates the content of the connection buffer already queued for sending. It's also possible it will result in prepare_write_connect() returning -EAGAIN despite the WRITE_PENDING big getting set. Fix this by preparing the connect authorizer first, setting the WRITE_PENDING bit only after that is done. Partially addresses http://tracker.newdream.net/issues/2424 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: drop msgr argument from prepare_write_connect()Alex Elder1-14/+11
In all cases, the value passed as the msgr argument to prepare_write_connect() is just con->msgr. Just get the msgr value from the ceph connection and drop the unneeded argument. The only msgr passed to prepare_write_banner() is also therefore just the one from con->msgr, so change that function to drop the msgr argument as well. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: send banner in process_connect()Alex Elder1-9/+7
prepare_write_connect() has an argument indicating whether a banner should be sent out before sending out a connection message. It's only ever set in one of its callers, so move the code that arranges to send the banner into that caller and drop the "include_banner" argument from prepare_write_connect(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17ceph: messenger: reset connection kvec callerAlex Elder1-1/+5
Reset a connection's kvec fields in the caller rather than in prepare_write_connect(). This ends up repeating a few lines of code but it's improving the separation between distinct operations on the connection, which we can take advantage of later. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17libceph: don't reset kvec in prepare_write_banner()Alex Elder1-3/+1
Move the kvec reset for a connection out of prepare_write_banner and into its only caller. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16ceph: ignore preferred_osd fieldSage Weil1-4/+0
Old users may not expect EINVAL, and there is no clear user-visibile behavior change now that we ignore it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-16ceph: fully initialize new layoutSage Weil2-6/+15
When we are setting a new layout, fully initialize the structure: - zero it out - always set preferred_osd to -1 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-14ceph: messenger: change read_partial() to take "end" argAlex Elder1-22/+38
Make the second argument to read_partial() be the ending input byte position rather than the beginning offset it now represents. This amounts to moving the addition "to + size" into the caller. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-14ceph: messenger: update "to" in read_partial() callerAlex Elder1-15/+16
read_partial() always increases whatever "to" value is supplied by adding the requested size to it, and that's the only thing it does with that pointed-to value. Do that pointer advance in the caller (and then only when the updated value will be subsequently used), and change the "to" parameter to be an in-only and non-pointer value. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-14ceph: messenger: use read_partial() in read_partial_message()Alex Elder1-20/+10
There are two blocks of code in read_partial_message()--those that read the header and footer of the message--that can be replaced by a call to read_partial(). Do that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-14rbd: correct sysfs snap attribute documentationJosh Durgin1-2/+2
Each attribute is prefixed with "snap_". Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: rename __rbd_update_snaps to __rbd_refresh_headerJosh Durgin1-6/+6
This function rereads the entire header and handles any changes in it, not just changes in snapshots. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: fix snapshot size typeJosh Durgin1-3/+3
Snapshot sizes should be the same type as regular image sizes. This only affects their displayed size in sysfs, not the reported size of an actual block device sizes. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: remove conditional snapid parametersJosh Durgin1-2/+2
The snapid parameters passed to rbd_do_op() and rbd_req_sync_op() are now always either a valid snapid or an explicit CEPH_NOSNAP. [elder@dreamhost.com: Rephrased the description] Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: store snapshot id instead of indexJosh Durgin1-22/+5
When a device was open at a snapshot, and snapshots were deleted or added, data from the wrong snapshot could be read. Instead of assuming the snap context is constant, store the actual snap id when the device is initialized, and rely on the OSDs to signal an error if we try reading from a snapshot that was deleted. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: protect read of snapshot sequence numberJosh Durgin1-1/+3
This is updated whenever a snapshot is added or deleted, and the snapc pointer is changed with every refresh of the header. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14rbd: fix integer overflow in rbd_header_from_disk()Xi Wang1-4/+6
ondisk->snap_count is read from disk via rbd_req_sync_read() and thus needs validation. Otherwise, a bogus `snap_count' could overflow the kmalloc() size, leading to memory corruption. Also use `u32' consistently for `snap_count'. [elder@dreamhost.com: changed to use UINT_MAX rather than ULONG_MAX] Signed-off-by: Xi Wang <xi.wang@gmail.com> Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14rbd: use gfp_flags parameter in rbd_header_from_disk()Dan Carpenter1-2/+2
We should use the gfp_flags that the caller specified instead of GFP_KERNEL here. There is only one caller and it uses GFP_KERNEL, so this change is just a cleanup and doesn't change how the code works. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14ceph: fix bounds check in ceph_decode_need and ceph_encode_needXi Wang1-2/+7
Given a large n, the bounds check (*p + n > end) can be bypassed due to pointer wraparound. A safer check is (n > end - *p). [elder@dreamhost.com: inverted test and renamed ceph_has_room()] Signed-off-by: Xi Wang <xi.wang@gmail.com> Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14ceph: osd_client: fix endianness bug in osd_req_encode_op()Alex Elder1-1/+1
From Al Viro <viro@zeniv.linux.org.uk> Al Viro noticed that we were using a non-cpu-encoded value in a switch statement in osd_req_encode_op(). The result would clearly not work correctly on a big-endian machine. Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-05-08crush: warn on do_rule failureSage Weil1-4/+11
If we get an error code from crush_do_rule(), print an error to the console. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: fix memory leak when destroying tree bucketsSage Weil1-0/+2
Reflects ceph.git commit 46d63d98434b3bc9dad2fc9ab23cbaedc3bcb0e4. Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: fix tree node weight lookupSage Weil2-3/+6
Fix the node weight lookup for tree buckets by using a correct accessor. Reflects ceph.git commit d287ade5bcbdca82a3aef145b92924cf1e856733. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: remove parent mapsSage Weil3-43/+0
These were used for the ill-fated forcefeed feature. Remove them. Reflects ceph.git commit ebdf80edfecfbd5a842b71fbe5732857994380c1. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: remove forcefeed functionalitySage Weil3-49/+2
Remove forcefeed functionality from CRUSH. This is an ugly misfeature that is mostly useless and unused. Remove it. Reflects ceph.git commit ed974b5000f2851207d860a651809af4a1867942. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com> Conflicts: net/ceph/crush/mapper.c
2012-05-08crush: use a temporary variable to simplify crush_do_ruleSage Weil1-9/+11
Use a temporary variable here to avoid repeated array lookups and clean up the code a bit. This reflects ceph.git commit 6b5be27634ad307b471a5bf0db85c4f5c834885f. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: be more tolerant of nonsensical crush mapsSage Weil1-9/+24
If we get a map that doesn't make sense, error out or ignore the badness instead of BUGging out. This reflects the ceph.git commits 9895f0bff7dc68e9b49b572613d242315fb11b6c and 8ded26472058d5205803f244c2f33cb6cb10de79. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: adjust local retry thresholdSage Weil1-1/+1
This small adjustment reflects a change that was made in ceph.git commit af6a9f30696c900a2a8bd7ae24e8ed15fb4964bb, about 6 months ago. An N-1 search is not exhaustive. Fixed ceph.git bug #1594. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08crush: clean up types, const-nessSage Weil4-23/+24
Move various types from int -> __u32 (or similar), and add const as appropriate. This reflects changes that have been present in the userland implementation for some time. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08ceph: refactor SETLAYOUT and SETDIRLAYOUT ioctl checks into common helperSage Weil1-44/+38
Both of these methods perform similar checks; move that code to a helper so that we can ensure the checks are consistent. Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-08ceph: drop support for preferred_osd pgsSage Weil7-62/+17
This was an ill-conceived feature that has been removed from Ceph. Do this gracefully: - reject attempts to specify a preferred_osd via the ioctl - stop exposing this information via virtual xattrs - always fill in -1 for requests, in case we talk to an older server - don't calculate preferred_osd placements/pgids Reviewed-by: Alex Elder <elder@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-04-06rbd: don't hold spinlock during messenger flushAlex Elder1-2/+2
A recent change made changes to the rbd_client_list be protected by a spinlock. Unfortunately in rbd_put_client(), the lock is taken before possibly dropping the last reference to an rbd_client, and on the last reference that eventually calls flush_workqueue() which can sleep. The problem was flagged by a debug spinlock warning: BUG: spinlock wrong CPU on CPU#3, rbd/27814 The solution is to move the spinlock acquisition and release inside rbd_client_release(), which is the spot where it's really needed for protecting the removal of the rbd_client from the client list. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-03-22rbd: move snap_rwsem to the device, rename to header_rwsemJosh Durgin1-11/+11
A new temporary header is allocated each time the header changes, but only the changed properties are copied over. We don't need a new semaphore for each header update. This addresses http://tracker.newdream.net/issues/2174 Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-03-22ceph: fix three bugs, two in ceph_vxattrcb_file_layout()Alex Elder1-3/+8
In ceph_vxattrcb_file_layout(), there is a check to determine whether a preferred PG should be formatted into the output buffer. That check assumes that a preferred PG number of 0 indicates "no preference," but that is wrong. No preference is indicated by a negative (specifically, -1) PG number. In addition, if that condition yields true, the preferred value is formatted into a sized buffer, but the size consumed by the earlier snprintf() call is not accounted for, opening up the possibilty of a buffer overrun. Finally, in ceph_vxattrcb_dir_rctime() where the nanoseconds part of the time displayed did not include leading 0's, which led to erroneous (sub-second portion of) time values being shown. This fixes these three issues: http://tracker.newdream.net/issues/2155 http://tracker.newdream.net/issues/2156 http://tracker.newdream.net/issues/2157 Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-03-22libceph: isolate kmap() call in write_partial_msg_pages()Alex Elder1-11/+2
In write_partial_msg_pages(), every case now does an identical call to kmap(page). Instead, just call it once inside the CRC-computing block where it's needed. Move the definition of kaddr inside that block, and make it a (char *) to ensure portable pointer arithmetic. We still don't kunmap() it until after the sendpage() call, in case that also ends up needing to use the mapping. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-03-22libceph: rename "page_shift" variable to something sensibleAlex Elder1-5/+6
In write_partial_msg_pages() there is a local variable used to track the starting offset within a bio segment to use. Its name, "page_shift" defies the Linux convention of using that name for log-base-2(page size). Since it's only used in the bio case rename it "bio_offset". Use it along with the page_pos field to compute the memory offset when computing CRC's in that function. This makes the bio case match the others more closely. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-03-22libceph: get rid of zero_page_addressAlex Elder1-9/+2
There's not a lot of benefit to zero_page_address, which basically holds a mapping of the zero page through the life of the messenger module. Even with our own mapping, the sendpage interface where it's used may need to kmap() it again. It's almost certain to be in low memory anyway. So stop treating the zero page specially in write_partial_msg_pages() and just get rid of zero_page_address entirely. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-21 23:12:36 +0300