summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-25Linux 4.14.281v4.14.281Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220523165746.957506211@linuxfoundation.org Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds3-23/+8
commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream. Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig" <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25swiotlb: fix info leak with DMA_FROM_DEVICEHalil Pasic3-1/+20
commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream. The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25net: atlantic: verify hw_head_ lies within TX buffer ringGrant Grundler1-0/+7
[ Upstream commit 2120b7f4d128433ad8c5f503a9584deba0684901 ] Bounds check hw_head index provided by NIC to verify it lies within the TX buffer ring. Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()Yang Yingliang1-3/+1
[ Upstream commit 0807ce0b010418a191e0e4009803b2d74c3245d5 ] Switch to using pcim_enable_device() to avoid missing pci_disable_device(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220510031316.1780409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()Yang Yingliang1-1/+4
[ Upstream commit 51ca86b4c9c7c75f5630fa0dbe5f8f0bd98e3c3e ] Fix the missing pci_disable_device() before return from tulip_init_one() in the error handling case. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220506094250.3630615-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25mac80211: fix rx reordering with non explicit / psmp ack policyFelix Fietkau1-2/+1
[ Upstream commit 5e469ed9764d4722c59562da13120bd2dc6834c5 ] When the QoS ack policy was set to non explicit / psmp ack, frames are treated as not being part of a BA session, which causes extra latency on reordering. Fix this by only bypassing reordering for packets with no-ack policy Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25scsi: qla2xxx: Fix missed DMA unmap for aborted commandsGleb Chesnokov1-0/+3
[ Upstream commit 26f9ce53817a8fd84b69a73473a7de852a24c897 ] Aborting commands that have already been sent to the firmware can cause BUG in qlt_free_cmd(): BUG_ON(cmd->sg_mapped) For instance: - Command passes rdx_to_xfer state, maps sgl, sends to the firmware - Reset occurs, qla2xxx performs ISP error recovery, aborts the command - Target stack calls qlt_abort_cmd() and then qlt_free_cmd() - BUG_ON(cmd->sg_mapped) in qlt_free_cmd() occurs because sgl was not unmapped Thus, unmap sgl in qlt_abort_cmd() for commands with the aborted flag set. Link: https://lore.kernel.org/r/AS8PR10MB4952D545F84B6B1DFD39EC1E9DEE9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25perf bench numa: Address compiler error on s390Thomas Richter1-1/+1
[ Upstream commit f8ac1c478424a9a14669b8cef7389b1e14e5229d ] The compilation on s390 results in this error: # make DEBUG=y bench/numa.o ... bench/numa.c: In function ‘__bench_numa’: bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 10 and 20 [-Werror=format-truncation=] 1749 | snprintf(tname, sizeof(tname), "process%d:thread%d", p, t); ^~ ... bench/numa.c:1749:64: note: directive argument in the range [-2147483647, 2147483646] ... # The maximum length of the %d replacement is 11 characters because of the negative sign. Therefore extend the array by two more characters. Output after: # make DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o # Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()") Suggested-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25gpio: mvebu/pwm: Refuse requests with inverted polarityUwe Kleine-König1-0/+3
[ Upstream commit 3ecb10175b1f776f076553c24e2689e42953fef5 ] The driver doesn't take struct pwm_state::polarity into account when configuring the hardware, so refuse requests for inverted polarity. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25gpio: gpio-vf610: do not touch other bits when set the target bitHaibo Chen1-2/+6
[ Upstream commit 9bf3ac466faa83d51a8fe9212131701e58fdef74 ] For gpio controller contain register PDDR, when set one target bit, current logic will clear all other bits, this is wrong. Use operator '|=' to fix it. Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.Andrew Lunn1-0/+7
[ Upstream commit fbb3abdf2223cd0dfc07de85fe5a43ba7f435bdf ] It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25igb: skip phy status check where unavailableKevin Mitchell1-1/+2
[ Upstream commit 942d2ad5d2e0df758a645ddfadffde2795322728 ] igb_read_phy_reg() will silently return, leaving phy_data untouched, if hw->ops.read_reg isn't set. Depending on the uninitialized value of phy_data, this led to the phy status check either succeeding immediately or looping continuously for 2 seconds before emitting a noisy err-level timeout. This message went out to the console even though there was no actual problem. Instead, first check if there is read_reg function pointer. If not, proceed without trying to check the phy status register. Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition") Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2Ard Biesheuvel1-1/+1
[ Upstream commit 3cfb3019979666bdf33a1010147363cf05e0f17b ] In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow encoding, and so it does not jump to the following instruction as expected. So use W(b) instead. Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25ARM: 9196/1: spectre-bhb: enable for Cortex-A15Ard Biesheuvel1-0/+1
[ Upstream commit 0dc14aa94ccd8ba35eb17a0f9b123d1566efd39e ] The Spectre-BHB mitigations were inadvertently left disabled for Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in that case. So fix that. Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net: af_key: add check for pfkey_broadcast in function pfkey_processJiasheng Jiang1-2/+4
[ Upstream commit 4dc2a5a8f6754492180741facf2a8787f2c415d7 ] If skb_clone() returns null pointer, pfkey_broadcast() will return error. Therefore, it should be better to check the return value of pfkey_broadcast() and return error if fails. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25NFC: nci: fix sleep in atomic context bugs caused by nci_skb_allocDuoming Zhou2-3/+3
[ Upstream commit 23dd4581350d4ffa23d58976ec46408f8f4c1e16 ] There are sleep in atomic context bugs when the request to secure element of st-nci is timeout. The root cause is that nci_skb_alloc with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is a timer handler. The call paths that could trigger bugs are shown below: (interrupt context 1) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_skb_alloc(..., GFP_KERNEL) //may sleep (interrupt context 2) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_send_data nci_queue_tx_data_frags nci_skb_alloc(..., GFP_KERNEL) //may sleep This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net/qla3xxx: Fix a test in ql_reset_work()Christophe JAILLET1-1/+2
[ Upstream commit 5361448e45fac6fb96738df748229432a62d78b6 ] test_bit() tests if one bit is set or not. Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit QL_RESET_START (i.e. 3) is set. In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say QL_ADAPTER_UP. This looks harmless, because this bit is likely be set, and when the ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set. This has been spotted by smatch. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25clk: at91: generated: consider range when calculating best rateCodrin Ciubotariu1-0/+4
[ Upstream commit d0031e6fbed955ff8d5f5bbc8fe7382482559cec ] clk_generated_best_diff() helps in finding the parent and the divisor to compute a rate closest to the required one. However, it doesn't take into account the request's range for the new rate. Make sure the new rate is within the required range. Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220413071318.244912-1-codrin.ciubotariu@microchip.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()Zixuan Fu1-0/+4
[ Upstream commit edf410cb74dc612fd47ef5be319c5a0bcd6e6ccd ] In vmxnet3_rq_create(), when dma_alloc_coherent() fails, vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all() -> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls vmxnet3_force_close() -> dev_close() in error handling code. And the driver calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all() -> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(), rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing a NULL pointer dereference. To fix this possible bug, an if statement is added to check whether rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so. The error log in our fault-injection testing is shown as follows: [ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3] ... [ 65.227977] Call Trace: ... [ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3] [ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3] [ 65.228866] __dev_close_many+0x288/0x350 [ 65.229607] dev_close_many+0xa4/0x480 [ 65.231124] dev_close+0x138/0x230 [ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3] [ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3] ... Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()Zixuan Fu1-0/+2
[ Upstream commit 9e7fef9521e73ca8afd7da9e58c14654b02dfad8 ] In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is freed immediately. Similarly, in another branch, when dma_map_page() fails, rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf() returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all() -> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs. To fix these possible bugs, rbi->skb and rbi->page should be cleared after they are freed. The error log in our fault-injection testing is shown as follows: [ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150 ... [ 14.321586] Call Trace: ... [ 14.325357] consume_skb+0x2f/0x150 [ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3] [ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3] [ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.361675] Allocated by task 351: ... [ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0 [ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3] [ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.367309] [ 14.367412] Freed by task 351: ... [ 14.368932] __dev_kfree_skb_any+0xd2/0xe0 [ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3] [ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3] [ 14.370174] __dev_open+0x28a/0x420 [ 14.370399] __dev_change_flags+0x192/0x590 [ 14.370667] dev_change_flags+0x7a/0x180 [ 14.370919] do_setlink+0xb28/0x3570 [ 14.371150] rtnl_newlink+0x1160/0x1740 [ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50 [ 14.371661] netlink_rcv_skb+0x1cd/0x3e0 [ 14.371913] netlink_unicast+0x5dc/0x840 [ 14.372169] netlink_sendmsg+0x856/0xc40 [ 14.372420] ____sys_sendmsg+0x8a7/0x8d0 [ 14.372673] __sys_sendmsg+0x1c2/0x270 [ 14.372914] do_syscall_64+0x41/0x90 [ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae ... Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()Ulf Hansson1-10/+8
commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 upstream All callers of __mmc_switch() should now be specifying a valid timeout for the CMD6 command. However, just to be sure, let's print a warning and default to use the generic_cmd6_time in case the provided timeout_ms argument is zero. In this context, let's also simplify some of the corresponding code and clarify some related comments. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSDUlf Hansson1-3/+3
commit ad91619aa9d78ab1c6d4a969c3db68bc331ae76c upstream The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is used to prepare an erase/trim operation. However, it doesn't make sense to use a timeout of 10 minutes while updating the register, which becomes the case when the timeout_ms argument for mmc_switch() is set to zero. Instead, let's use the generic_cmd6_time, as that seems like a reasonable timeout to use for these cases. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMCUlf Hansson1-3/+6
commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH to complete, are not defined by the eMMC spec. However, a timeout of 10 minutes as is currently being used, is just silly for both of these cases. Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for CACHE_FLUSH. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25drm/dp/mst: fix a possible memory leak in fetch_monitor_name()Hangyu Hua1-0/+1
commit 6e03b13cc7d9427c2c77feed1549191015615202 upstream. drm_dp_mst_get_edid call kmemdup to create mst_edid. So mst_edid need to be freed after use. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20220516032042.13166-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25perf: Fix sys_perf_event_open() race against selfPeter Zijlstra1-0/+14
commit 3ac6487e584a1eb54071dbe1212e05b884136704 upstream. Norbert reported that it's possible to race sys_perf_event_open() such that the looser ends up in another context from the group leader, triggering many WARNs. The move_group case checks for races against itself, but the !move_group case doesn't, seemingly relying on the previous group_leader->ctx == ctx check. However, that check is racy due to not holding any locks at that time. Therefore, re-check the result after acquiring locks and bailing if they no longer match. Additionally, clarify the not_move_group case from the move_group-vs-move_group race. Fixes: f63a8daa5812 ("perf: Fix event->ctx locking") Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25ALSA: wavefront: Proper check of get_user() errorTakashi Iwai1-1/+2
commit a34ae6c0660d3b96b0055f68ef74dc9478852245 upstream. The antient ISA wavefront driver reads its sample patch data (uploaded over an ioctl) via __get_user() with no good reason; likely just for some performance optimizations in the past. Let's change this to the standard get_user() and the error check for handling the fault case properly. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()linyujun1-5/+5
[ Upstream commit 9be4c88bb7924f68f88cfd47d925c2d046f51a73 ] The following KASAN warning is detected by QEMU. ================================================================== BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870 Read of size 4 at addr c36bba90 by task cat/163 CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40 Hardware name: ARM-Versatile Express [<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14) [<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0) [<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc) [<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170) [<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870) [<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134) [<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4) [<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60) [<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c) [<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120) [<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334) [<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc) [<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518) [<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0) [<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110) [<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8) [<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94) Exception stack(0xc36bb928 to 0xc36bb970) b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730 b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978 b960: c010e298 c011373c 60000013 ffffffff [<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870) [<c011373c>] (unwind_frame) from [<00000000>] (0x0) The buggy address belongs to the page: page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb flags: 0x0() raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000 page dumped because: kasan: bad access detected addr c36bba90 is located in stack of task cat/163 at offset 48 in frame: stack_trace_save+0x0/0xb4 this frame has 1 object: [32, 48) 'trace' Memory state around the buggy address: c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 >c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== There is a same issue on x86 and has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to arm architecture too. Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reported-by: He Ying <heying24@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25drbd: remove usage of list iterator variable after loopJakob Koschel1-2/+5
[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ] In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or skip the iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25MIPS: lantiq: check the return value of kzalloc()Xiaoke Wang3-16/+34
[ Upstream commit 34123208bbcc8c884a0489f543a23fe9eebb5514 ] kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check the return value of it to prevent potential wrong memory access or memory leak. Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: stmfts - fix reference leak in stmfts_input_openZheng Yongjun1-3/+5
[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ] pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: add bounds checking to input_set_capability()Jeff LaBundy1-0/+19
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ] Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com> Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25um: Cleanup syscall_handler_t definition/cast, fix warningDavid Gow1-3/+2
[ Upstream commit f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 ] The syscall_handler_t type for x86_64 was defined as 'long (*)(void)', but always cast to 'long (*)(long, long, long, long, long, long)' before use. This now triggers a warning (see below). Define syscall_handler_t as the latter instead, and remove the cast. This simplifies the code, and fixes the warning. Warning: In file included from ../arch/um/include/asm/processor-generic.h:13 from ../arch/x86/um/asm/processor.h:41 from ../include/linux/rcupdate.h:30 from ../include/linux/rculist.h:11 from ../include/linux/pid.h:5 from ../include/linux/sched.h:14 from ../include/linux/ptrace.h:6 from ../arch/um/kernel/skas/syscall.c:7: ../arch/um/kernel/skas/syscall.c: In function ‘handle_syscall’: ../arch/x86/um/shared/sysdep/syscalls_64.h:18:11: warning: cast between incompatible function types from ‘long int (*)(void)’ to ‘long int (*)(long int, long int, long int, long int, long int, long int)’ [ -Wcast-function-type] 18 | (((long (*)(long, long, long, long, long, long)) \ | ^ ../arch/x86/um/asm/ptrace.h:36:62: note: in definition of macro ‘PT_REGS_SET_SYSCALL_RETURN’ 36 | #define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res)) | ^~~ ../arch/um/kernel/skas/syscall.c:46:33: note: in expansion of macro ‘EXECUTE_SYSCALL’ 46 | EXECUTE_SYSCALL(syscall, regs)); | ^~~~~~~~~~~~~~~ Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25floppy: use a statically allocated error counterWilly Tarreau1-10/+7
commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream. Interrupt handler bad_flp_intr() may cause a UAF on the recently freed request just to increment the error count. There's no point keeping that one in the request anyway, and since the interrupt handler uses a static pointer to the error which cannot be kept in sync with the pending request, better make it use a static error counter that's reset for each new request. This reset now happens when entering redo_fd_request() for a new request via set_next_request(). One initial concern about a single error counter was that errors on one floppy drive could be reported on another one, but this problem is not real given that the driver uses a single drive at a time, as that PC-compatible controllers also have this limitation by using shared signals. As such the error count is always for the "current" drive. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18Linux 4.14.280v4.14.280Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220516193614.678319286@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()Yang Yingliang1-1/+1
commit 447ee1516f19f534a228dda237eddb202f23e163 upstream. It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18ping: fix address binding wrt vrfNicolas Dichtel1-1/+11
commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream. When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite. Before the patch: $ sysctl -w net.ipv4.ping_group_range='0 2147483647' $ ip link add blue type vrf table 10 $ ip link add foo type dummy $ ip link set foo master blue $ ip link set foo up $ ip addr add 192.168.1.1/24 dev foo $ ip addr add 2001::1/64 dev foo $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2 ping: bind: Cannot assign requested address $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2 ping6: bind icmp socket: Cannot assign requested address CC: stable@vger.kernel.org Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18drm/vmwgfx: Initialize drm_mode_fb_cmd2Zack Rusin1-1/+1
commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream. Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()Waiman Long1-2/+5
commit 2685027fca387b602ae565bff17895188b803988 upstream. There are 3 places where the cpu and node masks of the top cpuset can be initialized in the order they are executed: 1) start_kernel -> cpuset_init() 2) start_kernel -> cgroup_init() -> cpuset_bind() 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp() The first cpuset_init() call just sets all the bits in the masks. The second cpuset_bind() call sets cpus_allowed and mems_allowed to the default v2 values. The third cpuset_init_smp() call sets them back to v1 values. For systems with cgroup v2 setup, cpuset_bind() is called once. As a result, cpu and memory node hot add may fail to update the cpu and node masks of the top cpuset to include the newly added cpu or node in a cgroup v2 environment. For systems with cgroup v1 setup, cpuset_bind() is called again by rebind_subsystem() when the v1 cpuset filesystem is mounted as shown in the dmesg log below with an instrumented kernel. [ 2.609781] cpuset_bind() called - v2 = 1 [ 3.079473] cpuset_init_smp() called [ 7.103710] cpuset_bind() called - v2 = 0 smp_init() is called after the first two init functions. So we don't have a complete list of active cpus and memory nodes until later in cpuset_init_smp() which is the right time to set up effective_cpus and effective_mems. To fix this cgroup v2 mask setup problem, the potentially incorrect cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed. For cgroup v2 systems, the initial cpuset_bind() call will set the masks correctly. For cgroup v1 systems, the second call to cpuset_bind() will do the right setup. cc: stable@vger.kernel.org Signed-off-by: Waiman Long <longman@redhat.com> Tested-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom MA510 modemSven Schwermer1-0/+2
commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream. The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively: 30: Diag + QDSS + Modem + RMNET 31: Diag + Modem + AT + ECM 32: Modem + AT + ECM The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration. A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 30 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90b2 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0106 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=010a Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom L610 modemSven Schwermer1-0/+2
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream. The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively: 31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d10 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 33 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: qcserial: add support for Sierra Wireless EM7590Ethan Yang1-0/+2
commit 870b1eee2d844727b06e238c121d260bc5645580 upstream. Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions. Signed-off-by: Ethan Yang <etyang@sierrawireless.com> Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: pl2303: add device id for HP LM930 DisplayScott Chen2-0/+2
commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream. Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: cdc-wdm: fix reading stuck on device closeSergey Ryazanov1-0/+1
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream. cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18tcp: resalt the secret every 10 secondsEric Dumazet1-3/+9
[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ] In order to limit the ability for an observer to recognize the source ports sequence used to contact a set of destinations, we should periodically shuffle the secret. 10 seconds looks effective enough without causing particular issues. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: ops: Validate input values in snd_soc_put_volsw_range()Mark Brown1-1/+17
[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ] Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: max98090: Generate notifications on changes for custom controlMark Brown1-1/+1
[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ] The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: max98090: Reject invalid values in custom control put()Mark Brown1-0/+3
[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ] The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (f71882fg) Fix negative temperatureJi-Ze Hong (Peter Hong)1-2/+3
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ] All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement. In show_temp() temp = data->temp[nr] * 1000; When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000; Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()Taehee Yoo1-0/+5
[ Upstream commit 1fa89ffbc04545b7582518e57f4b63e2a062870f ] In the NIC ->probe() callback, ->mtd_probe() callback is called. If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too. In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and initializes mtd partiion. But mtd partition for sfc is shared data. So that allocated mtd partition data from last called efx_ef10_mtd_probe() will not be used. Therefore it must be freed. But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe(). kmemleak reports: unreferenced object 0xffff88811ddb0000 (size 63168): comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120 [<ffffffffa3873f0e>] __kmalloc+0x20e/0x250 [<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc] [<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc] [<ffffffffa414192c>] local_pci_probe+0xdc/0x170 [<ffffffffa4145df5>] pci_device_probe+0x235/0x680 [<ffffffffa443dd52>] really_probe+0x1c2/0x8f0 [<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460 [<ffffffffa443e92a>] driver_probe_device+0x4a/0x120 [<ffffffffa443f2ae>] __driver_attach+0x16e/0x320 [<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190 [<ffffffffa443b75e>] bus_add_driver+0x39e/0x560 [<ffffffffa4440b1e>] driver_register+0x18e/0x310 [<ffffffffc02e2055>] 0xffffffffc02e2055 [<ffffffffa3001af3>] do_one_initcall+0xc3/0x450 [<ffffffffa33ca574>] do_init_module+0x1b4/0x700 Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Fixes: 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 12:51:26 +0300