summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-18Linux 4.14.280v4.14.280Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220516193614.678319286@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()Yang Yingliang1-1/+1
commit 447ee1516f19f534a228dda237eddb202f23e163 upstream. It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18ping: fix address binding wrt vrfNicolas Dichtel1-1/+11
commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream. When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite. Before the patch: $ sysctl -w net.ipv4.ping_group_range='0 2147483647' $ ip link add blue type vrf table 10 $ ip link add foo type dummy $ ip link set foo master blue $ ip link set foo up $ ip addr add 192.168.1.1/24 dev foo $ ip addr add 2001::1/64 dev foo $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2 ping: bind: Cannot assign requested address $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2 ping6: bind icmp socket: Cannot assign requested address CC: stable@vger.kernel.org Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18drm/vmwgfx: Initialize drm_mode_fb_cmd2Zack Rusin1-1/+1
commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream. Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()Waiman Long1-2/+5
commit 2685027fca387b602ae565bff17895188b803988 upstream. There are 3 places where the cpu and node masks of the top cpuset can be initialized in the order they are executed: 1) start_kernel -> cpuset_init() 2) start_kernel -> cgroup_init() -> cpuset_bind() 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp() The first cpuset_init() call just sets all the bits in the masks. The second cpuset_bind() call sets cpus_allowed and mems_allowed to the default v2 values. The third cpuset_init_smp() call sets them back to v1 values. For systems with cgroup v2 setup, cpuset_bind() is called once. As a result, cpu and memory node hot add may fail to update the cpu and node masks of the top cpuset to include the newly added cpu or node in a cgroup v2 environment. For systems with cgroup v1 setup, cpuset_bind() is called again by rebind_subsystem() when the v1 cpuset filesystem is mounted as shown in the dmesg log below with an instrumented kernel. [ 2.609781] cpuset_bind() called - v2 = 1 [ 3.079473] cpuset_init_smp() called [ 7.103710] cpuset_bind() called - v2 = 0 smp_init() is called after the first two init functions. So we don't have a complete list of active cpus and memory nodes until later in cpuset_init_smp() which is the right time to set up effective_cpus and effective_mems. To fix this cgroup v2 mask setup problem, the potentially incorrect cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed. For cgroup v2 systems, the initial cpuset_bind() call will set the masks correctly. For cgroup v1 systems, the second call to cpuset_bind() will do the right setup. cc: stable@vger.kernel.org Signed-off-by: Waiman Long <longman@redhat.com> Tested-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom MA510 modemSven Schwermer1-0/+2
commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream. The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively: 30: Diag + QDSS + Modem + RMNET 31: Diag + Modem + AT + ECM 32: Modem + AT + ECM The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration. A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 30 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90b2 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0106 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=010a Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom L610 modemSven Schwermer1-0/+2
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream. The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively: 31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d10 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 33 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: qcserial: add support for Sierra Wireless EM7590Ethan Yang1-0/+2
commit 870b1eee2d844727b06e238c121d260bc5645580 upstream. Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions. Signed-off-by: Ethan Yang <etyang@sierrawireless.com> Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: pl2303: add device id for HP LM930 DisplayScott Chen2-0/+2
commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream. Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: cdc-wdm: fix reading stuck on device closeSergey Ryazanov1-0/+1
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream. cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18tcp: resalt the secret every 10 secondsEric Dumazet1-3/+9
[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ] In order to limit the ability for an observer to recognize the source ports sequence used to contact a set of destinations, we should periodically shuffle the secret. 10 seconds looks effective enough without causing particular issues. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: ops: Validate input values in snd_soc_put_volsw_range()Mark Brown1-1/+17
[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ] Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: max98090: Generate notifications on changes for custom controlMark Brown1-1/+1
[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ] The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ASoC: max98090: Reject invalid values in custom control put()Mark Brown1-0/+3
[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ] The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (f71882fg) Fix negative temperatureJi-Ze Hong (Peter Hong)1-2/+3
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ] All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement. In show_temp() temp = data->temp[nr] * 1000; When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000; Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()Taehee Yoo1-0/+5
[ Upstream commit 1fa89ffbc04545b7582518e57f4b63e2a062870f ] In the NIC ->probe() callback, ->mtd_probe() callback is called. If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too. In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and initializes mtd partiion. But mtd partition for sfc is shared data. So that allocated mtd partition data from last called efx_ef10_mtd_probe() will not be used. Therefore it must be freed. But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe(). kmemleak reports: unreferenced object 0xffff88811ddb0000 (size 63168): comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120 [<ffffffffa3873f0e>] __kmalloc+0x20e/0x250 [<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc] [<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc] [<ffffffffa414192c>] local_pci_probe+0xdc/0x170 [<ffffffffa4145df5>] pci_device_probe+0x235/0x680 [<ffffffffa443dd52>] really_probe+0x1c2/0x8f0 [<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460 [<ffffffffa443e92a>] driver_probe_device+0x4a/0x120 [<ffffffffa443f2ae>] __driver_attach+0x16e/0x320 [<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190 [<ffffffffa443b75e>] bus_add_driver+0x39e/0x560 [<ffffffffa4440b1e>] driver_register+0x18e/0x310 [<ffffffffc02e2055>] 0xffffffffc02e2055 [<ffffffffa3001af3>] do_one_initcall+0xc3/0x450 [<ffffffffa33ca574>] do_init_module+0x1b4/0x700 Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Fixes: 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pendingGuangguan Wang1-2/+2
[ Upstream commit f3c46e41b32b6266cf60b0985c61748f53bf1c61 ] Non blocking sendmsg will return -EAGAIN when any signal pending and no send space left, while non blocking recvmsg return -EINTR when signal pending and no data received. This may makes confused. As TCP returns -EAGAIN in the conditions described above. Align the behavior of smc with TCP. Fixes: 846e344eb722 ("net/smc: add receive timeout check") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18s390/lcs: fix variable dereferenced before checkAlexandra Winter1-3/+4
[ Upstream commit 671bb35c8e746439f0ed70815968f9a4f20a8deb ] smatch complains about drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739) Fixes: 27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18s390/ctcm: fix potential memory leakAlexandra Winter1-5/+1
[ Upstream commit 0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ] smatch complains about drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo' mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in ctcmpc_unpack_skb(). Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18s390/ctcm: fix variable dereferenced before checkAlexandra Winter1-2/+3
[ Upstream commit 2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ] Found by cppcheck and smatch. smatch complains about drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42) Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (ltq-cputemp) restrict it to SOC_XWAYRandy Dunlap1-1/+1
[ Upstream commit 151d6dcbed836270c6c240932da66f147950cbdb ] Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build errors since FALCON does not support the same features as XWAY. Change this symbol to depend on SOC_XWAY since that provides the necessary interfaces. Repairs these build errors: ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable': ../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe': ../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function) 92 | if (ltq_soc_type() != SOC_TYPE_VR9_2) Fixes: 7074d0a92758 ("hwmon: (ltq-cputemp) add cpu temp sensor driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Florian Eckert <fe@dev.tdt.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20220509234740.26841-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protectionJohannes Berg1-0/+3
[ Upstream commit 9e2db50f1ef2238fc2f71c5de1c0418b7a5b0ea2 ] This is needed since it might use (and pass out) pointers to e.g. keys protected by RCU. Can't really happen here as the frames aren't encrypted, but we need to still adhere to the rules. Fixes: cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18netlink: do not reset transport header in netlink_recvmsg()Eric Dumazet1-1/+0
[ Upstream commit d5076fe4049cadef1f040eda4aaa001bb5424225 ] netlink_recvmsg() does not need to change transport header. If transport header was needed, it should have been reset by the producer (netlink_dump()), not the consumer(s). The following trace probably happened when multiple threads were using MSG_PEEK. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1: skb_reset_transport_header include/linux/skbuff.h:2760 [inline] netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x204/0x2c0 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x74/0x90 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0: skb_reset_transport_header include/linux/skbuff.h:2760 [inline] netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978 ____sys_recvmsg+0x162/0x2f0 ___sys_recvmsg net/socket.c:2674 [inline] __sys_recvmsg+0x209/0x3f0 net/socket.c:2704 __do_sys_recvmsg net/socket.c:2714 [inline] __se_sys_recvmsg net/socket.c:2711 [inline] __x64_sys_recvmsg+0x42/0x50 net/socket.c:2711 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff -> 0x0000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220505161946.2867638-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ipv4: drop dst in multicast routing pathLokesh Dhoundiyal1-0/+1
[ Upstream commit 9e6c6d17d1d6a3f1515ce399f9a011629ec79aa0 ] kmemleak reports the following when routing multicast traffic over an ipsec tunnel. Kmemleak output: unreferenced object 0x8000000044bebb00 (size 256): comm "softirq", pid 0, jiffies 4294985356 (age 126.810s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80 ..............t. 80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f83947e0>] __kmalloc+0x1e8/0x300 [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58 [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8 [<00000000824f6cf1>] gre_rcv+0x178/0x540 [<00000000ccd4e162>] gre_rcv+0x7c/0xd8 [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350 [<000000006a483377>] ip_local_deliver_finish+0x54/0x68 [<00000000d9271b3a>] ip_local_deliver+0x128/0x168 [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8 [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0 [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0 [<00000000013d7914>] irq_exit+0xc4/0xe0 [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108 [<000000000751eb8e>] handle_int+0x16c/0x178 [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28 The metadata dst is leaked when ip_route_input_mc() updates the dst for the skb. Commit f38a9eb1f77b ("dst: Metadata destinations") correctly handled dropping the dst in ip_route_input_slow() but missed the multicast case which is handled by ip_route_input_mc(). Drop the dst in ip_route_input_mc() avoiding the leak. Fixes: f38a9eb1f77b ("dst: Metadata destinations") Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18net: Fix features skip in for_each_netdev_feature()Tariq Toukan1-2/+2
[ Upstream commit 85db6352fc8a158a893151baa1716463d34a20d0 ] The find_next_netdev_feature() macro gets the "remaining length", not bit index. Passing "bit - 1" for the following iteration is wrong as it skips the adjacent bit. Pass "bit" instead. Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18batman-adv: Don't skb_split skbuffs with frag_listSven Eckelmann1-0/+11
[ Upstream commit a063f2fba3fa633a599253b62561051ac185fa99 ] The receiving interface might have used GRO to receive more fragments than MAX_SKB_FRAGS fragments. In this case, these will not be stored in skb_shinfo(skb)->frags but merged into the frag list. batman-adv relies on the function skb_split to split packets up into multiple smaller packets which are not larger than the MTU on the outgoing interface. But this function cannot handle frag_list entries and is only operating on skb_shinfo(skb)->frags. If it is still trying to split such an skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST, then validate_xmit_skb() will try to linearize it. But this fails due to inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after skb_copy_bits() returns an error. In case of entries in frag_list, just linearize the skb before operating on it with skb_split(). Reported-by: Felix Kaechele <felix@kaechele.ca> Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Felix Kaechele <felix@kaechele.ca> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-15Linux 4.14.279v4.14.279Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220513142227.381154244@linuxfoundation.org Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15VFS: Fix memory leak caused by concurrently mounting fs with subtypeChenXiaoSong1-3/+6
If two processes mount same superblock, memory leak occurs: CPU0 | CPU1 do_new_mount | do_new_mount fs_set_subtype | fs_set_subtype kstrdup | | kstrdup memrory leak | The following reproducer triggers the problem: 1. shell command: mount -t ntfs /dev/sda1 /mnt & 2. c program: mount("/dev/sda1", "/mnt", "fuseblk", 0, "...") with kmemleak report being along the lines of unreferenced object 0xffff888235f1a5c0 (size 8): comm "mount.ntfs", pid 2860, jiffies 4295757824 (age 43.423s) hex dump (first 8 bytes): 00 a5 f1 35 82 88 ff ff ...5.... backtrace: [<00000000656e30cc>] __kmalloc_track_caller+0x16e/0x430 [<000000008e591727>] kstrdup+0x3e/0x90 [<000000008430d12b>] do_mount.cold+0x7b/0xd9 [<0000000078d639cd>] ksys_mount+0xb2/0x150 [<000000006015988d>] __x64_sys_mount+0x29/0x40 [<00000000e0a7c118>] do_syscall_64+0xc1/0x1d0 [<00000000bcea7df5>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<00000000803a4067>] 0xffffffffffffffff Linus's tree already have refactoring patchset [1], one of them can fix this bug: c30da2e981a7 ("fuse: convert to use the new mount API") After refactoring, init super_block->s_subtype in fuse_fill_super. Since we did not merge the refactoring patchset in this branch, I create this patch. This patch fix this by adding a write lock while calling fs_set_subtype. [1] https://patchwork.kernel.org/project/linux-fsdevel/patch/20190903113640.7984-3-mszeredi@redhat.com/ Fixes: 79c0b2df79eb ("add filesystem subtype support") Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lockTakashi Iwai4-11/+39
commit bc55cfd5718c7c23e5524582e9fa70b4d10f2433 upstream. syzbot caught a potential deadlock between the PCM runtime->buffer_mutex and the mm->mmap_lock. It was brought by the recent fix to cover the racy read/write and other ioctls, and in that commit, I overlooked a (hopefully only) corner case that may take the revert lock, namely, the OSS mmap. The OSS mmap operation exceptionally allows to re-configure the parameters inside the OSS mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the copy_from/to_user calls at read/write operations also take the mm->mmap_lock internally, hence it may lead to a AB/BA deadlock. A similar problem was already seen in the past and we fixed it with a refcount (in commit b248371628aa). The former fix covered only the call paths with OSS read/write and OSS ioctls, while we need to cover the concurrent access via both ALSA and OSS APIs now. This patch addresses the problem above by replacing the buffer_mutex lock in the read/write operations with a refcount similar as we've used for OSS. The new field, runtime->buffer_accessing, keeps the number of concurrent read/write operations. Unlike the former buffer_mutex protection, this protects only around the copy_from/to_user() calls; the other codes are basically protected by the PCM stream lock. The refcount can be a negative, meaning blocked by the ioctls. If a negative value is seen, the read/write aborts with -EBUSY. In the ioctl side, OTOH, they check this refcount, too, and set to a negative value for blocking unless it's already being accessed. Reported-by: syzbot+6e5c88838328e99c7e1c@syzkaller.appspotmail.com Fixes: dca947d4d26d ("ALSA: pcm: Fix races among concurrent read/write and buffer changes") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000381a0d05db622a81@google.com Link: https://lore.kernel.org/r/20220330120903.4738-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix races among concurrent prealloc proc writesTakashi Iwai1-4/+7
commit 69534c48ba8ce552ce383b3dfdb271ffe51820c3 upstream. We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations). Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220322170720.3529-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free callsTakashi Iwai1-14/+18
commit 3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream. Like the previous fixes to hw_params and hw_free ioctl races, we need to paper over the concurrent prepare ioctl calls against hw_params and hw_free, too. This patch implements the locking with the existing runtime->buffer_mutex for prepare ioctls. Unlike the previous case for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is performed to the linked streams, hence the lock can't be applied simply on the top. For tracking the lock in each linked substream, we modify snd_pcm_action_group() slightly and apply the buffer_mutex for the case stream_lock=false (formerly there was no lock applied) there. Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix races among concurrent read/write and buffer changesTakashi Iwai1-0/+4
commit dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream. In the current PCM design, the read/write syscalls (as well as the equivalent ioctls) are allowed before the PCM stream is running, that is, at PCM PREPARED state. Meanwhile, we also allow to re-issue hw_params and hw_free ioctl calls at the PREPARED state that may change or free the buffers, too. The problem is that there is no protection against those mix-ups. This patch applies the previously introduced runtime->buffer_mutex to the read/write operations so that the concurrent hw_params or hw_free call can no longer interfere during the operation. The mutex is unlocked before scheduling, so we don't take it too long. Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix races among concurrent hw_params and hw_free callsTakashi Iwai3-19/+39
commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream. Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity. Reported-by: Hu Jiahui <kirin.say@gmail.com> Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and ↵Muchun Song1-0/+3
__mcopy_atomic() commit 7c25a0b89a487878b0691e6524fb5a8827322194 upstream. userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this by insert flush_dcache_page() after copy_from_user() succeeds. Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com Fixes: b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic") Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: hugetlb: fix missing cache flush in copy_huge_page_from_user()Muchun Song1-0/+2
commit e763243cc6cb1fcc720ec58cfd6e7c35ae90a479 upstream. userfaultfd calls copy_huge_page_from_user() which does not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this issue by flushing dcache in copy_huge_page_from_user(). Link: https://lkml.kernel.org/r/20220210123058.79206-4-songmuchun@bytedance.com Fixes: fa4d75c1de13 ("userfaultfd: hugetlbfs: add copy_huge_page_from_user for hugetlb userfaultfd support") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mmc: rtsx: add 74 Clocks in power on flowRicky WU1-10/+20
commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream. SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15Bluetooth: Fix the creation of hdev->nameItay Iellin2-3/+6
commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream. Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation. Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000. Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15can: grcan: only use the NAPI poll budget for RXAndreas Larsson1-15/+7
commit 2873d4d52f7c52d60b316ba6c47bd7122b5a9861 upstream. The previous split budget between TX and RX made it return not using the entire budget but at the same time not having calling called napi_complete. This sometimes led to the poll to not be called, and at the same time having TX and RX interrupts disabled resulting in the driver getting stuck. Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15can: grcan: grcan_probe(): fix broken system id check for errata workaround ↵Andreas Larsson1-5/+11
needs commit 1e93ed26acf03fe6c97c6d573a10178596aadd43 upstream. The systemid property was checked for in the wrong place of the device tree and compared to the wrong value. Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicitLee Jones1-5/+8
commit 1f1e87b4dc4598eac57a69868534b92d65e47e82 upstream. Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’: drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’: drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’: drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15MIPS: Use address-of operator on section symbolsNathan Chancellor4-4/+4
commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream. When building xway_defconfig with clang: arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare] else if (__dtb_start != __dtb_end) ^ 1 error generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison. Link: https://github.com/ClangBuiltLinux/linux/issues/1232 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12Linux 4.14.278v4.14.278Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220510130732.522479698@linuxfoundation.org Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Fix reading MSI interrupt numberPali Rohár1-7/+3
commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 upstream. In advk_pcie_handle_msi() it is expected that when bit i in the W1C register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is updated to contain the MSI number corresponding to index i. Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG always contains the number of the last received MSI, overall. Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt number. Since Aardvark already forbids more than 32 interrupts and uses own allocated hwirq numbers, the msi_idx already corresponds to the received MSI number. Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Clear all MSIs at setupPali Rohár1-2/+4
commit 7d8dc1f7cd007a7ce94c5b4c20d63a8b8d6d7751 upstream. We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT). Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs, to ensure that we don't start receiving spurious interrupts. Use this new mask in advk_pcie_handle_msi(); Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12dm: interlock pending dm_io and dm_wait_for_bios_completionMike Snitzer1-0/+2
commit 9f6dc633761006f974701d4c88da71ab68670749 upstream. Commit d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO") didn't go far enough. When bio_end_io_acct ends the count of in-flight I/Os may reach zero and the DM device may be suspended. There is a possibility that the suspend races with dm_stats_account_io. Fix this by adding percpu "pending_io" counters to track outstanding dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also, rename md_in_flight_bios() to dm_in_flight_bios() and update it to iterate all pending_io counters. Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO") Cc: stable@vger.kernel.org Co-developed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12dm: fix mempool NULL pointer race when completing IOJiazi Li1-7/+10
commit d208b89401e073de986dc891037c5a668f5d5d95 upstream. dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). Cc: stable@vger.kernel.org Signed-off-by: Jiazi Li <lijiazi@xiaomi.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12net: ipv6: ensure we call ipv6_mc_down() at most oncej.nixdorf@avm.de1-2/+6
commit 9995b408f17ff8c7f11bc725c8aa225ba3a63b1c upstream. There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything Fixes: 3ce62a84d53c ("ipv6: exit early in addrconf_notify() if IPv6 is disabled") Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de> Signed-off-by: David S. Miller <davem@davemloft.net> [jnixdorf: context updated for bpo to v4.9/v4.14] Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMUSandipan Das1-0/+5
[ Upstream commit 5a1bde46f98b893cda6122b00e94c0c40a6ead3c ] On some x86 processors, CPUID leaf 0xA provides information on Architectural Performance Monitoring features. It advertises a PMU version which Qemu uses to determine the availability of additional MSRs to manage the PMCs. Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for the same, the kernel constructs return values based on the x86_pmu_capability irrespective of the vendor. This leaf and the additional MSRs are not supported on AMD and Hygon processors. If AMD PerfMonV2 is detected, the PMU version is set to 2 and guest startup breaks because of an attempt to access a non-existent MSR. Return zeros to avoid this. Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Sandipan Das <sandipan.das@amd.com> Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()Eric Dumazet1-3/+6
commit dba5bdd57bea587ea4f0b79b03c71135f84a7e8b upstream. syzbot reported an UAF in ip_mc_sf_allow() [1] Whenever RCU protected list replaces an object, the pointer to the new object needs to be updated _before_ the call to kfree_rcu() or call_rcu() Because kfree_rcu(ptr, rcu) got support for NULL ptr only recently in commit 12edff045bc6 ("rcu: Make kfree_rcu() ignore NULL pointers"), I chose to use the conditional to make sure stable backports won't miss this detail. if (psl) kfree_rcu(psl, rcu); net/ipv6/mcast.c has similar issues, addressed in a separate patch. [1] BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908 CPU: 0 PID: 908 Comm: syz-executor.5 Not tainted 5.18.0-rc4-syzkaller-00064-g8f4dd16603ce #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 raw_v4_input net/ipv4/raw.c:190 [inline] raw_local_deliver+0x4d1/0xbe0 net/ipv4/raw.c:218 ip_protocol_deliver_rcu+0xcf/0xb30 net/ipv4/ip_input.c:193 ip_local_deliver_finish+0x2ee/0x4c0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x1b3/0x200 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish+0x1cb/0x2f0 net/ipv4/ip_input.c:437 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0xaa/0xd0 net/ipv4/ip_input.c:556 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 netif_receive_skb_internal net/core/dev.c:5605 [inline] netif_receive_skb+0x13e/0x8e0 net/core/dev.c:5664 tun_rx_batched.isra.0+0x460/0x720 drivers/net/tun.c:1534 tun_get_user+0x28b7/0x3e30 drivers/net/tun.c:1985 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2015 call_write_iter include/linux/fs.h:2050 [inline] new_sync_write+0x38a/0x560 fs/read_write.c:504 vfs_write+0x7c0/0xac0 fs/read_write.c:591 ksys_write+0x127/0x250 fs/read_write.c:644 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3f12c3bbff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 99 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 cc fd ff ff 48 RSP: 002b:00007f3f13ea9130 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f3f12d9bf60 RCX: 00007f3f12c3bbff RDX: 0000000000000036 RSI: 0000000020002ac0 RDI: 00000000000000c8 RBP: 00007f3f12ce308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000036 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffb68dd79f R14: 00007f3f13ea9300 R15: 0000000000022000 </TASK> Allocated by task 908: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 kasan_kmalloc include/linux/kasan.h:234 [inline] __do_kmalloc mm/slab.c:3710 [inline] __kmalloc+0x209/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] sock_kmalloc net/core/sock.c:2501 [inline] sock_kmalloc+0xb5/0x100 net/core/sock.c:2492 ip_mc_source+0xba2/0x1100 net/ipv4/igmp.c:2392 do_ip_setsockopt net/ipv4/ip_sockglue.c:1296 [inline] ip_setsockopt+0x2312/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 753: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x13d/0x180 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:200 [inline] __cache_free mm/slab.c:3439 [inline] kmem_cache_free_bulk+0x69/0x460 mm/slab.c:3774 kfree_bulk include/linux/slab.h:437 [inline] kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3318 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3595 ip_mc_msfilter+0x712/0xb60 net/ipv4/igmp.c:2510 do_ip_setsockopt net/ipv4/ip_sockglue.c:1257 [inline] ip_setsockopt+0x32e1/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:3074 mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938 call_netdevice_notifiers_extack net/core/dev.c:1976 [inline] call_netdevice_notifiers net/core/dev.c:1990 [inline] unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751 default_device_exit_batch+0x449/0x590 net/core/dev.c:11245 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 The buggy address belongs to the object at ffff88807d37b900 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 4 bytes inside of 64-byte region [ffff88807d37b900, ffff88807d37b940) The buggy address belongs to the physical page: page:ffffea0001f4dec0 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d37b180 pfn:0x7d37b flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffff888010c41340 ffffea0001c795c8 ffff888010c40200 raw: ffff88807d37b180 ffff88807d37b000 000000010000001f 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x342040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_HARDWALL|__GFP_THISNODE), pid 2963, tgid 2963 (udevd), ts 139732238007, free_ts 139730893262 prep_new_page mm/page_alloc.c:2441 [inline] get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408 __alloc_pages_node include/linux/gfp.h:587 [inline] kmem_getpages mm/slab.c:1378 [inline] cache_grow_begin+0x75/0x350 mm/slab.c:2584 cache_alloc_refill+0x27f/0x380 mm/slab.c:2957 ____cache_alloc mm/slab.c:3040 [inline] ____cache_alloc mm/slab.c:3023 [inline] __do_cache_alloc mm/slab.c:3267 [inline] slab_alloc mm/slab.c:3309 [inline] __do_kmalloc mm/slab.c:3708 [inline] __kmalloc+0x3b3/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:714 [inline] tomoyo_encode2.part.0+0xe9/0x3a0 security/tomoyo/realpath.c:45 tomoyo_encode2 security/tomoyo/realpath.c:31 [inline] tomoyo_encode+0x28/0x50 security/tomoyo/realpath.c:80 tomoyo_realpath_from_path+0x186/0x620 security/tomoyo/realpath.c:288 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x21b/0x400 security/tomoyo/file.c:822 security_inode_getattr+0xcf/0x140 security/security.c:1350 vfs_getattr fs/stat.c:157 [inline] vfs_statx+0x16a/0x390 fs/stat.c:232 vfs_fstatat+0x8c/0xb0 fs/stat.c:255 __do_sys_newfstatat+0x91/0x110 fs/stat.c:425 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1356 [inline] free_pcp_prepare+0x549/0xd20 mm/page_alloc.c:1406 free_unref_page_prepare mm/page_alloc.c:3328 [inline] free_unref_page+0x19/0x6a0 mm/page_alloc.c:3423 __vunmap+0x85d/0xd30 mm/vmalloc.c:2667 __vfree+0x3c/0xd0 mm/vmalloc.c:2715 vfree+0x5a/0x90 mm/vmalloc.c:2746 __do_replace+0x16b/0x890 net/ipv6/netfilter/ip6_tables.c:1117 do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] do_ip6t_set_ctl+0x90d/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1026 tcp_setsockopt+0x136/0x2520 net/ipv4/tcp.c:3696 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc Fixes: c85bb41e9318 ("igmp: fix ip_mc_sf_allow race [v5]") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12btrfs: always log symlinks in full modeFilipe Manana1-1/+13
commit d0e64a981fd841cb0f28fcd6afcac55e6f1e6994 upstream. On Linux, empty symlinks are invalid, and attempting to create one with the system call symlink(2) results in an -ENOENT error and this is explicitly documented in the man page. If we rename a symlink that was created in the current transaction and its parent directory was logged before, we actually end up logging the symlink without logging its content, which is stored in an inline extent. That means that after a power failure we can end up with an empty symlink, having no content and an i_size of 0 bytes. It can be easily reproduced like this: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ sync # Create a file inside the directory and fsync the directory. $ touch /mnt/testdir/foo $ xfs_io -c "fsync" /mnt/testdir # Create a symlink inside the directory and then rename the symlink. $ ln -s /mnt/testdir/foo /mnt/testdir/bar $ mv /mnt/testdir/bar /mnt/testdir/baz # Now fsync again the directory, this persist the log tree. $ xfs_io -c "fsync" /mnt/testdir <power failure> $ mount /dev/sdc /mnt $ stat -c %s /mnt/testdir/baz 0 $ readlink /mnt/testdir/baz $ Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that their content is also logged. A test case for fstests will follow. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-02 14:15:40 +0300