summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-10usb: dwc2: gadget: fix checkpatch errorsJingoo Han1-2/+3
Fix checkpatch errors as belows. ERROR: open brace '{' following function declarations go on the next line ERROR: space required before the open parenthesis '(' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllersYoshihiro Shimoda5-0/+205
The R-Car H2 and M2 SoCs come with an xHCI controller that requires some specific initializations related to the firmware downloading and some specific registers. This patch adds the support for this special configuration as an xHCI quirk executed during probe and start. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: "mathias.nyman@intel.com" <mathias.nyman@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: host: xhci-plat: use devm_functionsHimangi Saraogi1-20/+4
This patch introduces the use of managed interface devm_ioremap_resource for ioremap_nocache and request_mem_region and removes the corresponding free functions in the probe and remove functions. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10xhci: make error messages grepableOliver Neukum1-18/+18
grep must work, not matter the line length. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10USB: kl5kusb105: Remove klsi_105_tiocmset functionPeter Senna Tschudin1-30/+0
This patch remove the function klsi_105_tiocmset which was only returning -EINVAL. It also removes the function prototype and the .tiocmset entry in the struct usb_serial_driver. Verified by compilation only. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: documentation for usb port power off mechanismsLan Tianyu1-2/+243
describe the mechanisms for controlling port power policy and discovering the port power state. [oliver]: fixes, clarification of wakeup vs port-power-control [sarah]: wordsmithing [djbw]: updates for peer port changes [alan]: review and fixes Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: force warm reset to break link re-connect livelockDan Williams3-20/+39
Resuming a powered down port sometimes results in the port state being stuck in the training sequence. hub 3-0:1.0: debounce: port 1: total 2000ms stable 0ms status 0x2e0 port1: can't get reconnection after setting port power on, status -110 hub 3-0:1.0: port 1 status 0000.02e0 after resume, -19 usb 3-1: can't resume, status -19 hub 3-0:1.0: logical disconnect on port 1 In the case above we wait for the port re-connect timeout of 2 seconds and observe that the port status is USB_SS_PORT_LS_POLLING (although it is likely toggling between this state and USB_SS_PORT_LS_RX_DETECT). This is indicative of a case where the device is failing to progress the link training state machine. It is resolved by issuing a warm reset to get the hub and device link state machines back in sync. hub 3-0:1.0: debounce: port 1: total 2000ms stable 0ms status 0x2e0 usb usb3: port1 usb_port_runtime_resume requires warm reset hub 3-0:1.0: port 1 not warm reset yet, waiting 50ms usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd After a reconnect timeout when we expect the device to be present, force a warm reset of the device. Note that we can not simply look at the link status to determine if a warm reset is required as any of the training states USB_SS_PORT_LS_POLLING, USB_SS_PORT_LS_RX_DETECT, or USB_SS_PORT_LS_COMP_MOD are valid states that do not indicate the need for warm reset by themselves. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Vincent Palatin <vpalatin@chromium.org> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Ksenia Ragiadakou <burzalodowa@gmail.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Sunil Joshi <joshi@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: allow lpm (en/dis)able only if device is atleast in default statePratyush Anand1-2/+4
When a USB device is disconnected, usb_unbind_interface is called, which tries to enable and disable LPM. usb_enable_lpm also try to send a control command SET SEL to the device. Since device is already disconnected, therefore it does not make sense to execute usb_(en/dis)able_lpm. This patch returns from usb_(en/dis)able_lpm, if device was not in default state atleast. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Aymen Bouattay <aymen.bouattay@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10dwc3: host: Enable USB3 LPM capabilityPratyush Anand2-0/+21
All dwc3 based xhci host controller supports USB3.0 LPM functionality. Therefore enable it in platform data for all dwc3 based xhci device if DWC3_HOST_USB3_LPM_ENABLE is selected in Kconfig. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-of-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10xhci: Platform: Set xhci lpm support quirk based on platform dataPratyush Anand3-1/+35
If an xhci platform supports USB3 LPM capability then enable XHCI_LPM_SUPPORT quirk flag. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10xhci: Platform: Add (en/dis)able_usb3_lpm_timeoutPratyush Anand1-0/+3
To use auto U0-U1/U2 transition by xhci platform device add (en/dis)able_usb3_lpm_timeout function to the xhci_plat_xhci_driver struct. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Aymen Bouattay <aymen.bouattay@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10xhci: A default implementation for Ux timeout calculation and tier policy checkPratyush Anand1-18/+48
As best case, a host controller should support U0 to U1 switching for the devices connected below any tier of hub level supported by usb specification. Therefore xhci_check_tier_policy should always return success as default implementation. A host should be able to issue LGO_Ux after the timeout calculated as per definition of system exit latency defined in C.1.5.2. Therefore xhci_calculate_ux_timeout returns ux_params.sel as the default implementation. Use default calculation in absence of any vendor specific limitations. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Aymen Bouattay <aymen.bouattay@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10usb: misc: usb3503: Update error code in print messageTushar Behera1-1/+2
'err' is uninitialized, rather print the error code directly. This also fixes following warning. drivers/usb/misc/usb3503.c: In function ‘usb3503_probe’: drivers/usb/misc/usb3503.c:195:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] dev_err(dev, "unable to request refclk (%d)\n", err); Signed-off-by: Tushar Behera <tushar.b@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08Merge 3.16-rc4 into usb-nextGreg Kroah-Hartman481-3071/+4603
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Linux 3.16-rc4v3.16-rc4Linus Torvalds1-1/+1
2014-07-06Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-0/+15
Pull devicetree bugfix from Grant Likely: "Important bug fix for parsing 64-bit addresses on 32-bit platforms. Without this patch the kernel will try to use memory ranges that cannot be reached" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch
2014-07-06Merge tag 'scsi-for-linus' of ↵Linus Torvalds13-43/+86
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of 13 fixes, a MAINTAINERS update and a sparse update. The fixes are mostly correct value initialisations, avoiding NULL derefs and some uninitialised pointer avoidance. All the patches have been incubated in -next for a few days. The final patch (use the scsi data buffer length to extract transfer size) has been rebased to add a cc to stable, but only the commit message has changed" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] use the scsi data buffer length to extract transfer size virtio-scsi: fix various bad behavior on aborted requests virtio-scsi: avoid cancelling uninitialized work items ibmvscsi: Add memory barriers for send / receive ibmvscsi: Abort init sequence during error recovery qla2xxx: Fix sparse warning in qla_target.c. bnx2fc: Improve stats update mechanism bnx2fc: do not scan uninitialized lists in case of error. fc: ensure scan_work isn't active when freeing fc_rport pm8001: Fix potential null pointer dereference and memory leak. MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs be2iscsi: remove potential junk pointer free be2iscsi: add an missing goto in error path scsi_error: set DID_TIME_OUT correctly scsi_error: fix invalid setting of host byte
2014-07-06Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-5/+51
Pull drm fixes from Dave Airlie: "i915, tda998x and vmwgfx fixes, The main one is i915 fix for missing VGA connectors, along with some fixes for the tda998x from Russell fixing some modesetting problems. (still on holidays, but got a spare moment to find these)" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix incorrect write to read-only register v2: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
2014-07-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds24-67/+292
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - A set of of OMAP patches that we had missed Tony's pull request of: * Reset fix for am43xx * Proper OPP table for omap5 * Fix for SoC detection of one of the DRA7 SoCs * hwmod updates to get SATA and OCP to work on omap5 (drivers merged in 3.16) * ... plus a handful of smaller fixes - sunxi needed to re-add machine specific restart code that was removed in anticipation of a watchdog driver being merged for 3.16, and it didn't make it in. - Marvell fixes for PCIe on SMP and a big-endian fix. - A trivial defconfig update to make my capri test board boot with bcm_defconfig again. ... and a couple of MAINTAINERS updates, one to claim new Keystone drivers that have been merged, and one to merge MXS and i.MX (both Freescale platforms). The largest diffs come from the hwmod code for omap5 and the re-add of the restart code on sunxi. The hwmod stuff is quite late at this point but it slipped through cracks repeatedly while coming up the maintainer chain and only affects the one SoC so risk is low" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add few more Keystone drivers MAINTAINERS: merge MXS entry into IMX one ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk ARM: bcm: Fix bcm and multi_v7 defconfigs ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-06Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds4-6/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A few minor fixlets in ARM SoC irq drivers and a fix for a memory leak which I introduced in the last round of cleanups :(" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix memory leak when calling irq_free_hwirqs() irqchip: spear_shirq: Fix interrupt offset irqchip: brcmstb-l2: Level-2 interrupts are edge sensitive irqchip: armada-370-xp: Mask all interrupts during initialization.
2014-07-06Merge tag 'drm-intel-fixes-2014-07-03' of ↵Dave Airlie3-1/+42
git://anongit.freedesktop.org/drm-intel Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away on a bunch of machines. Also a vblank fix for BDW and a power workaround fix for VLV. * tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW
2014-07-06Merge branch 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linuxDave Airlie1-1/+0
fix to a 3.15 commit. * 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix incorrect write to read-only register v2:
2014-07-06Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie1-3/+9
mode fixes for tda998x. * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
2014-07-05genirq: Fix memory leak when calling irq_free_hwirqs()Keith Busch1-2/+2
irq_free_hwirqs() always calls irq_free_descs() with a cnt == 0 which makes it a no-op since the interrupt count to free is decremented in itself. Fixes: 7b6ef1262549f6afc5c881aaef80beb8fd15f908 Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1404167084-8070-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-05Merge tag 'arm64-fixes' of ↵Linus Torvalds5-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 fixes from Catalin Marinas: - Exception level check at boot time (for completeness, not triggering any bug before) - I/D-cache synchronisation logic for huge pages - Config symbol typo * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix el2_setup check of CurrentEL arm64: mm: Make icache synchronisation logic huge page aware arm64: mm: Fix horrendous config typo
2014-07-05MAINTAINERS: Add few more Keystone driversSantosh Shilimkar1-1/+25
Update MAINTAINERS file for recently added reset controller, AEMIF and clocksource driver for Keystone SOCs. The EMIF memory controller driver is also added along with AEMIF. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-05MAINTAINERS: merge MXS entry into IMX oneShawn Guo1-7/+1
The mach-mxs platform is actually co-maintained by myself and pengutronix folks. Also it's hosted in the same kernel tree as IMX. So let's merge the entry into IMX one. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-05Merge tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson4-18/+47
mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-05ARM: sunxi: Reintroduce the restart code for A10/A20 SoCsMaxime Ripard1-0/+77
This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-05Merge tag 'omap-for-v3.16/fixes-against-rc1' of ↵Olof Johansson16-39/+139
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge OMAP fixes from Tony Lindgren: Fixes for omaps for issues discovered during the merge window and enabling of a few features that had to wait for the driver dependencies to clear. The fixes included are: - Fix am43xx hard reset flags - Fix SoC detection for DRA722 - Fix CPU OPP table for omap5 - Fix legacy mux parser bug if requested muxname is a prefix of multiple mux entries - Fix qspi interrupt binding that relies on the irq crossbar that has not yet been enabled - Add missing phy_sel for am43x-epos-evm - Drop unused gic_init_irq() that is no longer needed And the enabling of features that had driver dependencies are: - Change dra7 to use Audio Tracking Logic clock instead of a fixed clock now that the clock driver for it has been merged - Enable off idle configuration for selected omaps as all the kernel dependencies for device tree based booting are finally merged as this is needed to get the automated PM tests working finally with device tree based booting - Add hwmod entry for ocp2scp3 for omap5 to get sata working as all the driver dependencies are now in the kernel and this patch fell through the cracks during the merge window * tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-04Merge tag 'md/3.16-fixes' of git://neil.brown.name/mdLinus Torvalds1-1/+14
Pull md bugfixes from Neil Brown: "Two minor bugfixes for md in 3.16" * tag 'md/3.16-fixes' of git://neil.brown.name/md: md: flush writes before starting a recovery. md: make sure GET_ARRAY_INFO ioctl reports correct "clean" status
2014-07-04Merge tag 'sound-3.16-rc4' of ↵Linus Torvalds6-41/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains a few fixes for HD-audio: yet another Dell headset pin quirk, a fixup for Thinkpad T540P, and an improved fix for Haswell/Broadwell HDMI clock setup" * tag 'sound-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA controller drm/i915: provide interface for audio driver to query cdclk ALSA: hda - Add a fixup for Thinkpad T540p ALSA: hda - Add another headset pin quirk for some Dell machines
2014-07-04Merge branch 'for-linus' of ↵Linus Torvalds14-47/+109
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We've queued up a few fixes in my for-linus branch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix crash when starting transaction Btrfs: fix btrfs_print_leaf for skinny metadata Btrfs: fix race of using total_bytes_pinned btrfs: use E2BIG instead of EIO if compression does not help btrfs: remove stale comment from btrfs_flush_all_pending_stuffs Btrfs: fix use-after-free when cloning a trailing file hole btrfs: fix null pointer dereference in btrfs_show_devname when name is null btrfs: fix null pointer dereference in clone_fs_devices when name is null btrfs: fix nossd and ssd_spread mount option regression Btrfs: fix race between balance recovery and root deletion Btrfs: atomically set inode->i_flags in btrfs_update_iflags btrfs: only unlock block in verify_parent_transid if we locked it Btrfs: assert send doesn't attempt to start transactions btrfs compression: reuse recently used workspace Btrfs: fix crash when mounting raid5 btrfs with missing disks btrfs: create sprout should rename fsid on the sysfs as well btrfs: dev replace should replace the sysfs entry btrfs: dev add should add its sysfs entry btrfs: dev delete should remove sysfs entry btrfs: rename add_device_membership to btrfs_kobj_add_device
2014-07-04arm64: fix el2_setup check of CurrentELMarc Zyngier3-4/+6
The CurrentEL system register reports the Current Exception Level of the CPU. It doesn't say anything about the stack handling, and yet we compare it to PSR_MODE_EL2t and PSR_MODE_EL2h. It works by chance because PSR_MODE_EL2t happens to match the right bits, but that's otherwise a very bad idea. Just check for the EL value instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: fixed arch/arm64/kernel/efi-entry.S] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-04arm64: mm: Make icache synchronisation logic huge page awareSteve Capper1-1/+2
The __sync_icache_dcache routine will only flush the dcache for the first page of a compound page, potentially leading to stale icache data residing further on in a hugetlb page. This patch addresses this issue by taking into consideration the order of the page when flushing the dcache. Reported-by: Mark Brown <broonie@linaro.org> Tested-by: Mark Brown <broonie@linaro.org> Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
2014-07-04arm64: mm: Fix horrendous config typoSteve Capper1-1/+1
The define ARM64_64K_PAGES is tested for rather than CONFIG_ARM64_64K_PAGES. Correct that typo here. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-04ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA ↵Mengdong Lin3-41/+66
controller For HSW/BDW display HD-A controller, hda_set_bclk() is defined to set BCLK by programming the M/N values as per the core display clock (CDCLK) queried from i915 display driver. And the audio driver will also set BCLK in azx_first_init() since the display driver can turn off the shared power in boot phase if only eDP is connected and M/N values will be lost and must be reprogrammed. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-04drm/i915: provide interface for audio driver to query cdclkJani Nikula2-0/+22
For Haswell and Broadwell, if the display power well has been disabled, the display audio controller divider values EM4 M VALUE and EM5 N VALUE will have been lost. The CDCLK frequency is required for reprogramming them to generate 24MHz HD-A link BCLK. So provide a private interface for the audio driver to query CDCLK. This is a stopgap solution until a more generic interface between audio and display drivers has been implemented. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-04Merge tag 'usb-3.16-rc4' of ↵Linus Torvalds32-94/+164
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB bugfixes from Greg KH: "Here's a round of USB bugfixes, quirk additions, and new device ids for 3.16-rc4. Nothing major in here at all, just a bunch of tiny changes. All have been in linux-next with no reported issues" * tag 'usb-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: chipidea: udc: delete td from req's td list at ep_dequeue usb: Kconfig: make EHCI_MSM selectable for QCOM SOCs usb-storage/SCSI: Add broken_fua blacklist flag usb: musb: dsps: fix the base address for accessing the mode register tools: ffs-test: fix header values endianess usb: phy: msm: Do not do runtime pm if the phy is not idle usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq usb: gadget: gr_udc: Fix check for invalid number of microframes usb: musb: Fix panic upon musb_am335x module removal usb: gadget: f_fs: resurect usb_functionfs_descs_head structure Revert "tools: ffs-test: convert to new descriptor format fixing compilation error" xhci: Fix runtime suspended xhci from blocking system suspend. xhci: clear root port wake on bits if controller isn't wake-up capable xhci: correct burst count field for isoc transfers on 1.0 xhci hosts xhci: Use correct SLOT ID when handling a reset device command MAINTAINERS: update e-mail address usb: option: add/modify Olivetti Olicard modems USB: ftdi_sio: fix null deref at port probe MAINTAINERS: drop two usb-serial subdriver entries USB: option: add device ID for SpeedUp SU9800 usb 3g modem ...
2014-07-04Merge tag 'staging-3.16-rc4' of ↵Linus Torvalds4-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver bugfixes from Greg KH: "Nothing major here, just 4 small bugfixes that resolve some issues reported for the IIO (staging and non-staging) and the tidspbridge driver" * tag 'staging-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: tidspbridge: fix an erroneous removal of parentheses iio: of_iio_channel_get_by_name() returns non-null pointers for error legs staging: iio/ad7291: fix error code in ad7291_probe() iio:adc:ad799x: Fix reading and writing of event values, apply shift
2014-07-04Merge tag 'driver-core-3.16-rc4' of ↵Linus Torvalds3-15/+61
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Well, one drivercore fix for kernfs to resolve a reported issue with sysfs files being updated from atomic contexts, and another lz4 bugfix for testing potential buffer overflows" * tag 'driver-core-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: add overrun checks to lz4_uncompress_unknownoutputsize() kernfs: kernfs_notify() must be useable from non-sleepable contexts
2014-07-04Merge tag 'trace-fixes-v3.16-rc3' of ↵Linus Torvalds3-24/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Oleg Nesterov found and fixed a bug in the perf/ftrace/uprobes code where running: # perf probe -x /lib/libc.so.6 syscall # echo 1 >> /sys/kernel/debug/tracing/events/probe_libc/enable # perf record -e probe_libc:syscall whatever kills the uprobe. Along the way he found some other minor bugs and clean ups that he fixed up making it a total of 4 patches. Doing unrelated work, I found that the reading of the ftrace trace file disables all function tracer callbacks. This was fine when ftrace was the only user, but now that it's used by perf and kprobes, this is a bug where reading trace can disable kprobes and perf. A very unexpected side effect and should be fixed" * tag 'trace-fixes-v3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove ftrace_stop/start() from reading the trace file tracing/uprobes: Fix the usage of uprobe_buffer_enable() in probe_event_enable() tracing/uprobes: Kill the bogus UPROBE_HANDLER_REMOVE code in uprobe_dispatcher() uprobes: Change unregister/apply to WARN() if uprobe/consumer is gone tracing/uprobes: Revert "Support mix of ftrace and perf"
2014-07-04Merge branch 'rc-fixes' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "There is one more fix for the relative paths series from -rc1: Print the path to the build directory at the start of the build, so that editors and IDEs can match the relative paths to source files" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Print the name of the build directory
2014-07-04Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-11/+13
Pull nfsd bugfixes from Bruce Fields: "By coincidence, two NFSv4 symlink bugs, one introduced in the 3.16 xdr encoding rewrite, the other a decoding bug that I think we've had since the start but that just doesn't trigger very often" * 'for-3.16' of git://linux-nfs.org/~bfields/linux: nfs: fix nfs4d readlink truncated packet nfsd: fix rare symlink decoding bug
2014-07-04ptrace,x86: force IRET path after a ptrace_stop()Tejun Heo2-0/+19
The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-04lz4: add overrun checks to lz4_uncompress_unknownoutputsize()Greg Kroah-Hartman1-1/+5
Jan points out that I forgot to make the needed fixes to the lz4_uncompress_unknownoutputsize() function to mirror the changes done in lz4_decompress() with regards to potential pointer overflows. The only in-kernel user of this function is the zram code, which only takes data from a valid compressed buffer that it made itself, so it's not a big issue. But due to external kernel modules using this function, it's better to be safe here. Reported-by: Jan Beulich <JBeulich@suse.com> Cc: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-03Merge remote-tracking branch 'scsi-queue/drivers-for-3.16' into for-linusJames Bottomley11-32/+75
2014-07-03[SCSI] use the scsi data buffer length to extract transfer sizeMartin K. Petersen1-1/+1
Commit 8846bab180fa introduced a helper that can be used to query the wire transfer size for a SCSI command taking protection information into account. However, some commands do not have a 1:1 mapping between the block range they work on and the payload size (discard, write same). After the scatterlist has been set up these requests use __data_len to store the number of bytes to report completion on. This means that callers of scsi_transfer_length() would get the wrong byte count for these types of requests. To overcome this we make scsi_transfer_length() use the scatterlist length in the scsi_data_buffer as basis for the wire transfer calculation instead of __data_len. Reported-by: Christoph Hellwig <hch@infradead.org> Debugged-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Fixes: d77e65350f2d82dfa0557707d505711f5a43c8fd Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-07-03Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds14-86/+89
Merge fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: shmem: fix init_page_accessed use to stop !PageLRU bug kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()" tools/testing/selftests/ipc/msgque.c: improve error handling when not running as root fs/seq_file: fallback to vmalloc allocation /proc/stat: convert to single_open_size() hwpoison: fix the handling path of the victimized page frame that belong to non-LRU mm:vmscan: update the trace-vmscan-postprocess.pl for event vmscan/mm_vmscan_lru_isolate msync: fix incorrect fstart calculation zram: revalidate disk after capacity change tools: memory-hotplug fix unexpected operator error tools: cpu-hotplug fix unexpected operator error autofs4: fix false positive compile error slub: fix off by one in number of slab tests mm: page_alloc: fix CMA area initialisation when pageblock > MAX_ORDER
2014-07-03shmem: fix init_page_accessed use to stop !PageLRU bugHugh Dickins1-5/+10
Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU) in isolate_lru_pages() at mm/vmscan.c:1281! Commit 2457aec63745 ("mm: non-atomically mark page accessed during page cache allocation where possible") looks like interrupted work-in-progress. mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's - shmem_write_begin() is clearly wrong to use it after shmem_getpage(), when the page is always visible in radix_tree, and often already on LRU. Revert change to shmem_write_begin(), and use init_page_accessed() or mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp(). SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed() before; but since many other filesystems use [__]page_symlink(), which did and does mark the page accessed, consider this as rectifying an oversight. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>