summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2005-06-28[PATCH] skge: cleanup ethtool mode supportStephen Hemminger1-60/+65
Unify mapping of supported modes based on hardware. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: remove XM phy (untested code)Stephen Hemminger1-217/+138
Remove support for the non-Broadcom genesis based boards. The code is untested, and probably won't work as is. The newer boards are all Yukon based, and only old Genesis board I can find uses Broadcom. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: remove Yukon2 related special casesStephen Hemminger1-47/+7
Remove the bits and pieces added relating to Yukon II chipset. The Yukon 2 will be in a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: remove unused declarationsStephen Hemminger2-390/+24
Get rid of definitions for chip versions and PHY chips that this driver does not support. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: eliminate Yukon2 hooksStephen Hemminger1-10/+0
The Yukon chips don't support TSO, and Yukon2 will be a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: replace chip_rev() accessorStephen Hemminger2-36/+26
Replace inline accessor functions for chip revision and number of ports with simple structure members. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: use pci_read_config_wordStephen Hemminger1-3/+3
Rather than accessing PCI config space through MMIO space, use the standard PCI functions. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: function amd macro name changeStephen Hemminger2-306/+279
The inlines and macro's needed some cleanup's and fixes: * change name of macro SKGEMAC_REG to SK_REG to better reflect usage and fix comments * ditto for SK_GEXM_REG -> SK_XMAC_REG and SKGEGMA_REG -> SK_GMA_REG * change skge_gm_ to just gm_ since it is just a local function and long names look ugly. * change skge_xm_ to just xm_ * fix xm_write32 to write as two u16's with correct byte order * fix xm_outaddr to correctly use offset Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: PCI_DEVICE() macroStephen Hemminger1-22/+11
Use PCI_DEVICE() macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-28[PATCH] skge: whietspace cleanupStephen Hemminger2-47/+47
Cleanup whitespace around if() and switch() and end of lines Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-06-27Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds6-26/+31
2005-06-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds28-55/+73
2005-06-27[IPVS]: Fix for overflowspageexec2-5/+7
From: <pageexec@freemail.hu> $subject was fixed in 2.4 already, 2.6 needs it as well. The impact of the bugs is a kernel stack overflow and privilege escalation from CAP_NET_ADMIN via the IP_VS_SO_SET_STARTDAEMON/IP_VS_SO_GET_DAEMON ioctls. People running with 'root=all caps' (i.e., most users) are not really affected (there's nothing to escalate), but SELinux and similar users should take it seriously if they grant CAP_NET_ADMIN to other users. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PATCH] DM9000 network driver bugfixSascha Hauer1-2/+2
This patch fixes two bugs in the dm9000 network driver: - Don't read one byte too much in 8bit mode. - release correct resource Signed-off-by: Jochen Karrer <j.karrer@lightmaze.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] Documentation/networking/dmfe.txt: Make documentation nicerIsmail Donmez1-38/+44
Patch indents dmfe.txt to look like other docs. It adds a tip about CNET cards using Davicom chipsets. Also it removes parts where it refers to how to build driver out-of-kernel which seems to be cruft from times where the driver was out of the kernel. Signed-off-by: Ismail Donmez <ismail@kde.org.tr> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] fealnx.c calls dev_kfree_skb from atomic contextDenis Vlasenko1-2/+1
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] fix int vs. pm_message_t confusion in airoPavel Machek1-5/+5
Fix int vs. pm_message_t confusion in airo. Should change no code. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] defxx: Use irqreturn_t for the interrupt handlerMaciej W. Rozycki1-37/+51
This is a fix for the interrupt handler in the defxx driver to use irqreturn_t. Beside the obvious fix of returning a proper status at all, it actually checks board registers as appropriate for determining if an interrupt has been recorded in the bus-specific interface logic. The patch also includes an obvious one-line fix for SET_NETDEV_DEV needed for the EISA variation, for which I've decided there is no point in sending separately. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] dmfe warning fixAndrew Morton1-2/+3
drivers/net/tulip/dmfe.c: In function `dmfe_parse_srom': drivers/net/tulip/dmfe.c:1805: warning: passing arg 1 of `__le16_to_cpup' from incompatible pointer type drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type This is basically a guess: Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27[PATCH] document that 8139TOO supports 8129/8130Adrian Bunk2-3/+4
The 8129/8130 support is a sub-option that is not visible if the user hasn't enabled the 8139 support. Let's make it a bit easier for users to find the driver for their nic. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-27[NETLINK]: Fix two socket hashing bugs.David S. Miller1-3/+8
1) netlink_release() should only decrement the hash entry count if the socket was actually hashed. This was causing hash->entries to underflow, which resulting in all kinds of troubles. On 64-bit systems, this would cause the following conditional to erroneously trigger: err = -ENOMEM; if (BITS_PER_LONG > 32 && unlikely(hash->entries >= UINT_MAX)) goto err; 2) netlink_autobind() needs to propagate the error return from netlink_insert(). Otherwise, callers will not see the error as they should and thus try to operate on a socket with a zero pid, which is very bad. However, it should not propagate -EBUSY. If two threads race to autobind the socket, that is fine. This is consistent with the autobind behavior in other protocols. So bug #1 above, combined with this one, resulted in hangs on netlink_sendmsg() calls to the rtnetlink socket. We'd try to do the user sendmsg() with the socket's pid set to zero, later we do a socket lookup using that pid (via the value we stashed away in NETLINK_CB(skb).pid), but that won't give us the user socket, it will give us the rtnetlink socket. So when we try to wake up the receive queue, we dive back into rtnetlink_rcv() which tries to recursively take the rtnetlink semaphore. Thanks to Jakub Jelink for providing backtraces. Also, thanks to Herbert Xu for supplying debugging patches to help track this down, and also finding a mistake in an earlier version of this fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PATCH] net/slip: replace schedule_timeout() with msleep_interruptible()Nishanth Aravamudan1-4/+2
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected.
2005-06-27[PATCH] drivers/net/ewrk3.c: remove dead codeAdrian Bunk1-9/+3
This patch removes some obviously dead code found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-27[PATCH] drivers/net/skfp/: fix LITTLE_ENDIANAdrian Bunk2-1/+3
This patch fixes the LITTLE_ENDIAN #define and a function prototype. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-27[PATCH] drivers/net/tokenring/: cleanupsAdrian Bunk12-90/+21
This patch contains the follwing cleanups: - make needlessly global code static - remove obsolete Emacs settings Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-27[ATALK]: Include asm/byteorder.h in linux/atalk.hDavid S. Miller1-0/+2
We're using __be16 in userland visible types, so we have to include asm/byteorder.h so that works. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PKTGEN]: Fix random packet sizes causing panicRobert Olsson1-16/+13
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PATCH] pcnet_cs.c: IRQ handler optimizationAndreas Mohr1-4/+6
During some performance diagnostics I stumbled on this slightly wasteful code in pcnet_cs.c which I made the patch included at the bottom for (two minor comment fixes included). Improvement: instead of *always* calculating lea 0x2c0(%edx),%ebx and then additionally doing the mov %edx,0xc0(%ebx) addition *if we need it*, we now do the *whole* calculation of mov %edx,0x380(%ebx) *only* if we need it. This even manages to save us a whole 16-byte alignment buffer loss in this compilation case. Result: slightly improves IRQ handler performance in both shared and non-shared IRQ case, which should make my rusty P3/700 a slight bit happier. Thank you for your support, Andreas Mohr old asm result (using gcc 3.3.5): 000015a0 <ei_irq_wrapper>: 15a0: 55 push %ebp 15a1: 89 e5 mov %esp,%ebp 15a3: 53 push %ebx 15a4: 8d 9a c0 02 00 00 lea 0x2c0(%edx),%ebx 15aa: e8 fc ff ff ff call 15ab <ei_irq_wrapper+0xb> 15af: 83 f8 01 cmp $0x1,%eax 15b2: 74 03 je 15b7 <ei_irq_wrapper+0x17> 15b4: 5b pop %ebx 15b5: 5d pop %ebp 15b6: c3 ret 15b7: 31 d2 xor %edx,%edx 15b9: 89 93 c0 00 00 00 mov %edx,0xc0(%ebx) 15bf: eb f3 jmp 15b4 <ei_irq_wrapper+0x14> 15c1: eb 0d jmp 15d0 <ei_watchdog> 15c3: 90 nop 15c4: 90 nop 15c5: 90 nop 15c6: 90 nop 15c7: 90 nop 15c8: 90 nop 15c9: 90 nop 15ca: 90 nop 15cb: 90 nop 15cc: 90 nop 15cd: 90 nop 15ce: 90 nop 15cf: 90 nop 000015d0 <ei_watchdog>: new asm result: 000015a0 <ei_irq_wrapper>: 15a0: 55 push %ebp 15a1: 89 e5 mov %esp,%ebp 15a3: 53 push %ebx 15a4: 89 d3 mov %edx,%ebx 15a6: e8 fc ff ff ff call 15a7 <ei_irq_wrapper+0x7> 15ab: 83 f8 01 cmp $0x1,%eax 15ae: 74 03 je 15b3 <ei_irq_wrapper+0x13> 15b0: 5b pop %ebx 15b1: 5d pop %ebp 15b2: c3 ret 15b3: 31 d2 xor %edx,%edx 15b5: 89 93 80 03 00 00 mov %edx,0x380(%ebx) 15bb: eb f3 jmp 15b0 <ei_irq_wrapper+0x10> 15bd: 8d 76 00 lea 0x0(%esi),%esi 000015c0 <ei_watchdog>: Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27drivers/net/: Use the DMA_{64,32}BIT_MASK constantsDomen Puncer11-16/+27
Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org>
2005-06-27[TCP]: Let TCP_CONG_ADVANCED default to nAdrian Bunk1-1/+0
It doesn't seem to make much sense to let an "If unsure, say N." option default to y. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[IPV4]: Fix thinko in TCP_CONG_BIC default.David S. Miller1-1/+1
Since it is tristate when we offer it as a choice, we should definte it also as tristate when forcing it as the default. Otherwise kconfig warns. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PATCH] arlan: module parameter fixesMagnus Damm1-14/+12
Make sure the code compiles with and without ARLAN_ENTRY_EXIT_DEBUGGING. Only provide parameter descriptions when parameters are defined. Remove "arlan_"-prefix to shape up built-in parameter names: arlan.arlan_debug -> arlan.debug arlan.arlan_EEPROM_bad -> arlan.EEPROM_bad arlan.arlan_entry_and_exit_debug -> arlan.entry_and_exit_debug arlan.arlan_entry_debug -> arlan.entry_debug arlan.arlan_exit_debug -> arlan.exit_debug Signed-off-by: Magnus Damm <damm@opensource.se>
2005-06-27[PATCH] net/sis900: Use the DMA_32BIT_MASK constantTobias Klauser1-3/+2
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() instead of custom macros. This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
2005-06-27Merge /spare/repo/netdev-2.6/ branch 'register-netdev'Jeff Garzik21-228/+156
2005-06-27Merge /spare/repo/linux-2.6/Jeff Garzik3272-77453/+199552
2005-06-278139cp: safer spin loop for get_statisticsStephen Hemminger1-6/+6
The spin loop in 8139cp is limited to 100 iterations when pulling hardware stats. There is no allowance for processor speed so on a fast machine, the stats may not be available that fast. Also, if the board doesn't return soon enough make sure turn the address back off to prevent later updates when memory has gone away.
2005-06-27gianfar: Update Marvell PHY nameKumar Gala1-1/+1
This patch updates the name identifier to list both of the Marvell PHYs that are supported. Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
2005-06-27bonding: xor/802.3ad improved slave hashJay Vosburgh4-13/+114
Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27bonding: gratuitous ARPJay Vosburgh2-34/+255
Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27Tulip fixes for Cobalt Qube/RaQRalf Baechle3-2/+21
2005-06-27[PATCH] ARM: 2757/1: remove ixdp2400_init_irq from ixdp2800 codeLennert Buytenhek1-6/+0
Patch from Lennert Buytenhek Compiling one kernel that supports both ixdp2400 and ixdp2800 gives an error, as a copy of the ixdp2400 irq init routing accidentally ended up in ixdp2800.c somehow. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] ARM: 2756/1: add ixp2000 msf mappingLennert Buytenhek2-0/+9
Patch from Lennert Buytenhek Add a mapping for the ixp2400 and ixp2800 msf unit. The msf is the ixp2000's 'media and switch fabric' unit, which handles the networking part of the chip. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] ARM: 2755/1: describe ixp2000 virtual memory map layoutLennert Buytenhek1-0/+15
Patch from Lennert Buytenhek Add a comment to asm/arch-ixp2000/ixp2000-regs.h describing the ixp2000 virtual memory map layout. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] ARM: 2754/1: move ixp2000 VMALLOC_END upLennert Buytenhek1-1/+1
Patch from Lennert Buytenhek As the ixdp cpld mappings now live at 0xfe000000, we can push VMALLOC_END upwards to 0xfb000000, where the first iotable mapping begins. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] ARM: 2753/1: move ixdp* cpld mappingsLennert Buytenhek2-4/+4
Patch from Lennert Buytenhek All ixdp platforms currently have a cpld mapped in at 0xfafff000. Since this address is not 1M-aligned, a regular page mapping will be used instead of a section mapping, which opens up the possibility of triggering ixp2400 erratum #66 as we only do the XCB=101 workaround thing for section mappings. There is still a lot of space higher up in the virtual memory map for 1M mappings, so move the cpld mapping to 0xfe000000 and make it 1M big so that a section mapping will be used for it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27Merge upstream (approx. 2.6.12-git8) into 'janitor' branch of netdev-2.6.Jeff Garzik3272-77453/+199553
2005-06-26Merge 'drm-3264' branch of ↵Linus Torvalds8-10/+1501
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
2005-06-26Merge 'drm-fixes' branch of ↵Linus Torvalds8-26/+151
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
2005-06-26[PATCH] ARM: Add SA_TIMER flag to timer interruptsRussell King23-44/+44
VST needs to know which timer handler is for the timer interrupt. Mark all timer interrupts with the SA_TIMER flag. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26[PATCH] ppc32: Fix MPC83xx IPIC external interrupt pending register offsetKumar Gala1-7/+7
The pending registers for IRQ1-IRQ7 were pointing to the interrupt pending register instead of the external one. Signed-off-by: Tony Li <Tony.Li@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 10:41:08 +0300