summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-04-18arch: Prepare for smp_mb__{before,after}_atomic()Peter Zijlstra6-14/+82
Since the smp_mb__{before,after}*() ops are fundamentally dependent on how an arch can implement atomics it doesn't make sense to have 3 variants of them. They must all be the same. Furthermore, the 3 variants suggest they're only valid for those 3 atomic ops, while we have many more where they could be applied. So move away from smp_mb__{before,after}_{atomic,clear}_{dec,inc,bit}() and reduce the interface to just the two: smp_mb__{before,after}_atomic(). This patch prepares the way by introducing default implementations in asm-generic/barrier.h that default to a full barrier and providing __deprecated inlines for the previous 6 barriers if they're not provided by the arch. This should allow for a mostly painless transition (lots of deprecated warns in the interim). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-wr59327qdyi9mbzn6x937s4e@git.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Chen, Gong" <gong.chen@linux.intel.com> Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18arc,hexagon: Delete asm/barrier.hPeter Zijlstra2-74/+0
Both already use asm-generic/barrier.h as per their include/asm/Kbuild. Remove the stale files. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-c7vlkshl3tblim0o8z2p70kt@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-hexagon@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18ia64: Fix up smp_mb__{before,after}_clear_bit()Peter Zijlstra2-5/+11
IA64 doesn't actually have acquire/release barriers, its a lie! Add a comment explaining this and fix up the bitop barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-akevfh136um9dqvb1ohm55ca@git.kernel.org Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18Merge branch 'parisc-3.15' of ↵Linus Torvalds6-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There are two major changes in this patchset: The major fix is that the epoll_pwait() syscall for 32bit userspace was not using the compat wrapper on a 64bit kernel. Secondly we changed the value of SHMLBA from 4MB to PAGE_SIZE to reflect that we can actually mmap to any multiple of PAGE_SIZE. The only thing which needs care is that shared mmaps need to be mapped at the same offset inside the 4MB cache window" * 'parisc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix epoll_pwait syscall on compat kernel parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZE parisc: Replace __get_cpu_var uses for address calculation
2014-04-17Merge branch 'ipmi' (emailed ipmi fixes)Linus Torvalds7-155/+261
Merge ipmi fixes from Corey Minyard: "Things collected since last kernel release. Some of these are pretty important. The first three are bug fixes. The next two are to hopefully make everyone happy about allowing ACPI to be on all the time and not have IPMI have an effect on the system when not in use. The last is a little cleanup" * emailed patches from Corey Minyard <cminyard@mvista.com>: ipmi: boolify some things ipmi: Turn off all activity on an idle ipmi interface ipmi: Turn off default probing of interfaces ipmi: Reset the KCS timeout when starting error recovery ipmi: Fix a race restarting the timer Char: ipmi_bt_sm, fix infinite loop
2014-04-17ipmi: boolify some thingsCorey Minyard3-40/+38
Convert some ints to bools. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17ipmi: Turn off all activity on an idle ipmi interfaceCorey Minyard4-97/+182
The IPMI driver would wake up periodically looking for events and watchdog pretimeouts. If there is nothing waiting for these events, it's really kind of pointless to be checking for them. So modify the driver so the message handler can pass down if it needs the lower layer to be waiting for these. Modify the system interface lower layer to turn off all timer and thread activity if the upper layer doesn't need anything and it is not currently handling messages. And modify the message handler to not restart the timer if its timer is not needed. The timers and kthread will still be enabled if: - the SI interface is handling a message. - a user has enabled watching for events. - the IPMI watchdog timer is in use (since it uses pretimeouts). - the message handler is waiting on a remote response. - a user has registered to receive commands. This mostly affects interfaces without interrupts. Interfaces with interrupts already don't use CPU in the system interface when the interface is idle. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17ipmi: Turn off default probing of interfacesCorey Minyard2-1/+13
The default probing can cause problems with some system, slow booting, extra CPU usages, etc. Turn it off by default and give a config option to enable it. From: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17ipmi: Reset the KCS timeout when starting error recoveryCorey Minyard1-2/+3
The OBF timer in KCS was not reset in one situation when error recovery was started, resulting in an immediate timeout. Reported-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17ipmi: Fix a race restarting the timerBodo Stroesser1-18/+28
With recent changes it is possible for the timer handler to detect an idle interface and not start the timer, but the thread to start an operation at the same time. The thread will not start the timer in that instance, resulting in the timer not running. Instead, move all timer operations under the lock and start the timer in the thread if it detect non-idle and the timer is not already running. Moving under locks allows the last timeout to be set in both the thread and the timer. 'Timer is not running' means that the timer is not pending and smi_timeout() is not running. So we need a flag to detect this correctly. Also fix a few other timeout bugs: setting the last timeout when the interrupt has to be disabled and the timer started, and setting the last timeout in check_start_timer_thread possibly racing with the timer Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17Char: ipmi_bt_sm, fix infinite loopJiri Slaby1-1/+1
In read_all_bytes, we do unsigned char i; ... bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; ... for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-debugged-by: Rui Hui Dian <rhdian@novell.com> Cc: Tomas Cech <tcech@suse.cz> Cc: Corey Minyard <minyard@acm.org> Cc: <openipmi-developer@lists.sourceforge.net> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17Merge tag 'stable/for-linus-3.15-rc1-tag' of ↵Linus Torvalds7-16/+98
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from David Vrabel: "Xen regression and bug fixes for 3.15-rc1: - fix completely broken 32-bit PV guests caused by x86 refactoring 32-bit thread_info. - only enable ticketlock slow path on Xen (not bare metal) - fix two bugs with PV guests not shutting down when requested - fix a minor memory leak in xen-pciback error path" * tag 'stable/for-linus-3.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/manage: Poweroff forcefully if user-space is not yet up. xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart. xen/spinlock: Don't enable them unconditionally. xen-pciback: silence an unwanted debug printk xen: fix memory leak in __xen_pcibk_add_pci_dev() x86/xen: Fix 32-bit PV guests's usage of kernel_stack
2014-04-17Merge tag '3.15-fixes' of git://neil.brown.name/mdLinus Torvalds1-2/+1
Pull md bugfix from Neil Brown: "One BUG fix for md for recent commit" * tag '3.15-fixes' of git://neil.brown.name/md: raid5: fix a race of stripe count check
2014-04-17Merge tag 'fbdev-reorder-3.15' of ↵Linus Torvalds482-2666/+2682
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev renaming patches from Tomi Valkeinen: "Reorder drivers/video/ directory so that all fbdev drivers are now located in drivers/video/fbdev/ and the fbdev framework core files are located in drivers/video/fbdev/core/ The drivers/video/Kconfig is modified so that the DRM and the fbdev menu options are in separate submenus, instead of both being mixed in the same 'Graphics support' menu level" * tag 'fbdev-reorder-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: Kconfig: move drm and fb into separate menus fbdev: move fbdev core files to separate directory video: move fbdev to drivers/video/fbdev
2014-04-17raid5: fix a race of stripe count checkShaohua Li1-2/+1
I hit another BUG_ON with e240c1839d11152b0355442. In __get_priority_stripe(), stripe count equals to 0 initially. Between atomic_inc and BUG_ON, get_active_stripe() finds the stripe. So the stripe count isn't 1 any more. V2: keeps the BUG_ON suggested by Neil. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-17video: Kconfig: move drm and fb into separate menusTomi Valkeinen1-0/+4
At the moment the "Device Drivers / Graphics support" kernel config page looks rather messy, with DRM and fbdev driver selections on the same page, some on the top level Graphics support page, some under their respective subsystems. If I'm not mistaken, this is caused by the drivers depending on other things than DRM or FB, which causes Kconfig to arrange the options in not-so-neat manner. Both DRM and FB have a main menuconfig option for the whole DRM or FB subsystem. Optimally, this would be enough to arrange all DRM and FB options under the respective subsystem, but for whatever reason this doesn't work reliably. This patch adds an explicit submenu for DRM and FB, making it much clearer which options are related to FB, and which to DRM. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17fbdev: move fbdev core files to separate directoryTomi Valkeinen23-23/+25
Instead of having fbdev framework core files at the root fbdev directory, mixed with random fbdev device drivers, move the fbdev core files to a separate core directory. This makes it much clearer which of the files are actually part of the fbdev framework, and which are part of device drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17video: move fbdev to drivers/video/fbdevTomi Valkeinen481-2662/+2672
The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-45/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - reboot regression fix - build message spam fix - GPU quirk fix - 'make kvmconfig' fix plus the wire-up of the renameat2() system call on i386" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the PCI reboot method from the default chain x86/build: Supress "Nothing to be done for ..." messages x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks x86/platform: Fix "make O=dir kvmconfig" i386: Wire up the renameat2() syscall
2014-04-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds11-61/+148
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, plus a simple hardware-enablement patch for the Intel RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is still fine at this stage" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Instead of redirecting flex output, use -o perf tools: Fix double free in perf test 21 (code-reading.c) perf stat: Initialize statistics correctly perf bench: Set more defaults in the 'numa' suite perf bench: Fix segfault at the end of an 'all' execution perf bench: Update manpage to mention numa and futex perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi() perf probe: Fix to handle errors in line_range searching perf probe: Fix --line option behavior perf tools: Pick up libdw without explicit LIBDW_DIR MAINTAINERS: Change e-mail to kernel.org one perf callchains: Disable unwind libraries when libelf isn't found tools lib traceevent: Do not call warning() directly tools lib traceevent: Print event name when show warning if possible perf top: Fix documentation of invalid -s option perf/x86: Enable DRAM RAPL support on Intel Haswell
2014-04-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "ARM VIC (Vectored Irq Controller) irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: vic: Properly chain the cascaded IRQs
2014-04-17Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds3-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "liblockdep fixes and mutex debugging fixes" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Fix debug_mutexes tools/liblockdep: Add proper versioning to the shared obj tools/liblockdep: Ignore asmlinkage and visible
2014-04-17Merge tag 'fbdev-fixes-3.15' of ↵Linus Torvalds8-32/+87
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fix build errors for bf54x-lq043fb and imxfb - fbcon fix for da8xx-fb - omapdss fixes for hdmi audio, irq handling and fclk calculation * tag 'fbdev-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: bf54x-lq043fb: fix build error OMAPDSS: Change struct reg_field to dispc_reg_field OMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr() OMAPDSS: fix shared irq handlers video: imxfb: Select LCD_CLASS_DEVICE unconditionally OMAPDSS: fix rounding when calculating fclk rate video: da8xx-fb: Fix casting of info->pseudo_palette
2014-04-17Merge tag 'pinctrl-v3.15-2' of ↵Linus Torvalds10-1471/+1514
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol fixes from Linus Walleij: "A first set of pin control fixes for the v3.15 series: - Fix a couple of barnsjukdomar on the Rockchip driver. - Remove an idiotic debug print I happened to leave behind in the Nomadik driver. - Fixup the Qualcomm MSM interrupt handling code for the TLMM v2. - Three patches renaming the Broadcom Capri driver to BCM28155. This has been falling between the chairs for some time due to some cross-tree synchronization misunderstandings, now I'm fed up with this and just rename it in this -rc1 phase" * tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix typo in bindings documentation Update bcm_defconfig with new pinctrl CONFIG pinctrl: Rename Broadcom Capri pinctrl driver pinctrl: msm: Correct interrupt code for TLMM v2 pinctrl: nomadik: delete stray debug print pinctrl: rockchip: handle first half of rk3188-bank0 correctly pinctrl: rockchip: add return value to rockchip_set_mux pinctrl: rockchip: fix offset of mux registers for rk3188
2014-04-16Merge branch 'for-linus' of ↵Linus Torvalds14-36/+223
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "An update to the oops output with additional information about the crash. The renameat2 system call is enabled. Two patches in regard to the PTR_ERR_OR_ZERO cleanup. And a bunch of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp_vt220: Fix kernel panic due to early terminal input s390/compat: fix typo s390/uaccess: fix possible register corruption in strnlen_user_srst() s390: add 31 bit warning message s390: wire up sys_renameat2 s390: show_registers() should not map user space addresses to kernel symbols s390/mm: print control registers and page table walk on crash s390/smp: fix smp_stop_cpu() for !CONFIG_SMP s390: fix control register update
2014-04-16Merge tag 'please-pull-ia64-erratum' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull itanium erratum fix from Tony Luck: "Small workaround for a rare, but annoying, erratum #237" * tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)
2014-04-16[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)Tony Luck3-3/+3
April 2014 Itanium processor specification update: http://www.intel.com/content/www/us/en/processors/itanium/itanium-specification-update.html describes this erratum: ========================================================================= 237. Under a complex set of conditions, store to load forwarding for a sub 8-byte load may complete incorrectly Problem: A load instruction may complete incorrectly when a code sequence using 4-byte or smaller load and store operations to the same address is executed in combination with specific timing of all the following concurrent conditions: store to load forwarding, alignment checking enabled, a mis-predicted branch, and complex cache utilization activity. Implication: The affected sub 8-byte instruction may complete incorrectly resulting in unpredictable system behavior. There is an extremely low probability of exposure due to the significant number of complex microarchitectural concurrent conditions required to encounter the erratum. Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling Hyper-Threading will significantly reduce exposure to the conditions that contribute to encountering the erratum. Status: See the Summary Table of Changes for the affected steppings. ========================================================================= [Table of changes essentially lists all models from McKinley to Tukwila] The PSR.ac bit controls whether the processor will always generate an unaligned reference trap (0x5a00) for a misaligned data access (when PSR.ac=1) or if it will let the access succeed when running on a cpu that implements logic to handle some unaligned accesses. Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3 [IA64] Rationalize kernel mode alignment checking we made the decision to always enable strict checking. We were already doing so in trap/interrupt context because the common preamble code set this bit - but the rest of supervisor code (and by inheritance user code) ran with PSR.ac=0. We now reverse that decision and set PSR.ac=0 everywhere in the kernel (also inherited by user processes). This will avoid the erratum using the method described in the Itanium specification update. Net effect for users is that the processor will handle unaligned access when it can (typically with a tiny performance bubble in the pipeline ... but much less invasive than taking a trap and having the OS perform the access). Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-04-16x86: Remove the PCI reboot method from the default chainIngo Molnar2-42/+44
Steve reported a reboot hang and bisected it back to this commit: a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list He heroically tested all reboot methods and found the following: reboot=t # triple fault ok reboot=k # keyboard ctrl FAIL reboot=b # BIOS ok reboot=a # ACPI FAIL reboot=e # EFI FAIL [system has no EFI] reboot=p # PCI 0xcf9 FAIL And I think it's pretty obvious that we should only try PCI 0xcf9 as a last resort - if at all. The other observation is that (on this box) we should never try the PCI reboot method, but close with either the 'triple fault' or the 'BIOS' (terminal!) reboot methods. Thirdly, CF9_COND is a total misnomer - it should be something like CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ... So this patch fixes the worst problems: - it orders the actual reboot logic to follow the reboot ordering pattern - it was in a pretty random order before for no good reason. - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and BOOT_CF9_SAFE flags to make the code more obvious. - it tries the BIOS reboot method before the PCI reboot method. (Since 'BIOS' is a terminal reboot method resulting in a hang if it does not work, this is essentially equivalent to removing the PCI reboot method from the default reboot chain.) - just for the miraculous possibility of terminal (resulting in hang) reboot methods of triple fault or BIOS returning without having done their job, there's an ordering between them as well. Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds63-279/+454
Pull networking fixes from David Miller: 1) Fix BPF filter validation of netlink attribute accesses, from Mathias Kruase. 2) Netfilter conntrack generation seqcount not initialized properly, from Andrey Vagin. 3) Fix comparison mask computation on big-endian in nft_cmp_fast(), from Patrick McHardy. 4) Properly limit MTU over ipv6, from Eric Dumazet. 5) Fix seccomp system call argument population on 32-bit, from Daniel Borkmann. 6) skb_network_protocol() should not use hard-coded ETH_HLEN, instead skb->mac_len needs to be used. From Vlad Yasevich. 7) We have several cases of using socket based communications to implement a tunnel. For example, some tunnels are encapsulations over UDP so we use an internal kernel UDP socket to do the transmits. These tunnels should behave just like other software devices and pass the packets on down to the next layer. Most importantly we want the top-level socket (eg TCP) that created the traffic to be charged for the SKB memory. However, once you get into the IP output path, we have code that assumed that whatever was attached to skb->sk is an IP socket. To keep the top-level socket being charged for the SKB memory, whilst satisfying the needs of the IP output path, we now pass in an explicit 'sk' argument. From Eric Dumazet. 8) ping_init_sock() leaks group info, from Xiaoming Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) cxgb4: use the correct max size for firmware flash qlcnic: Fix MSI-X initialization code ip6_gre: don't allow to remove the fb_tunnel_dev ipv4: add a sock pointer to dst->output() path. ipv4: add a sock pointer to ip_queue_xmit() driver/net: cosa driver uses udelay incorrectly at86rf230: fix __at86rf230_read_subreg function at86rf230: remove check if AVDD settled net: cadence: Add architecture dependencies net: Start with correct mac_len in skb_network_protocol Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer" cxgb4: Save the correct mac addr for hw-loopback connections in the L2T net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF qlcnic: Do not disable SR-IOV when VFs are assigned to VMs qlcnic: Fix QLogic application/driver interface for virtual NIC configuration qlcnic: Fix PVID configuration on eSwitch port. qlcnic: Fix max ring count calculation qlcnic: Fix to send INIT_NIC_FUNC as first mailbox. qlcnic: Fix panic due to uninitialzed delayed_work struct in use. ...
2014-04-15cxgb4: use the correct max size for firmware flashSteve Wise1-1/+1
The wrong max fw size was being used and causing false "too big" errors running ethtool -f. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15qlcnic: Fix MSI-X initialization codeAlexander Gordeev1-12/+16
Function qlcnic_setup_tss_rss_intr() might enter endless loop in case pci_enable_msix() contiguously returns a positive number of MSI-Xs that could have been allocated. Besides, the function contains 'err = -EIO;' assignment that never could be reached. This update fixes the aforementioned issues. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ip6_gre: don't allow to remove the fb_tunnel_devNicolas Dichtel1-0/+10
It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a4664 ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet19-46/+74
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: * Instead of redirecting flex output, use -o (Cody P Schafer) * Fix double free in perf test 21 (Adrian Hunter) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-15ipv4: add a sock pointer to ip_queue_xmit()Eric Dumazet10-13/+13
ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15xen/manage: Poweroff forcefully if user-space is not yet up.Konrad Rzeszutek Wilk1-2/+30
The user can launch the guest in this sequence: xl create -p /vm.cfg [launch, but pause it] xl shutdown latest [sets control/shutdown=poweroff] xl unpause latest xl console latest [and see that the guest has completely ignored the shutdown request] In reality the guest hasn't ignored it. It registers a watch and gets a notification that there is value. It then calls the shutdown_handler which ends up calling orderly_shutdown. Unfortunately that is so early in the bootup that there are no user-space. Which means that the orderly_shutdown fails. But since the force flag was set to false it continues on without reporting. What we really want to is to use the force when we are in the SYSTEM_BOOTING state and not use the 'force' when SYSTEM_RUNNING. However, if we are in the running state - and the shutdown command has been given before the user-space has been setup, there is nothing we can do. Worst yet, we stop ignoring the 'xl shutdown' requests! As such, the other part of this patch is to only stop ignoring the 'xl shutdown' when we are truly in the power off sequence. That means the user can do multiple 'xl shutdown' and we will try to act on them instead of ignoring them. Fixes-Bug: http://bugs.xenproject.org/xen/bug/6 Reported-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart.Konrad Rzeszutek Wilk1-3/+41
The 'read_reply' works with 'process_msg' to read of a reply in XenBus. 'process_msg' is running from within the 'xenbus' thread. Whenever a message shows up in XenBus it is put on a xs_state.reply_list list and 'read_reply' picks it up. The problem is if the backend domain or the xenstored process is killed. In which case 'xenbus' is still awaiting - and 'read_reply' if called - stuck forever waiting for the reply_list to have some contents. This is normally not a problem - as the backend domain can come back or the xenstored process can be restarted. However if the domain is in process of being powered off/restarted/halted - there is no point of waiting on it coming back - as we are effectively being terminated and should not impede the progress. This patch solves this problem by checking whether the guest is the right domain. If it is an initial domain and hurtling towards death - there is no point of continuing the wait. All other type of guests continue with their behavior (as Xenstore is expected to still be running in another domain). Fixes-Bug: http://bugs.xenproject.org/xen/bug/8 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15xen/spinlock: Don't enable them unconditionally.Konrad Rzeszutek Wilk1-1/+4
The git commit a945928ea2709bc0e8e8165d33aed855a0110279 ('xen: Do not enable spinlocks before jump_label_init() has executed') was added to deal with the jump machinery. Earlier the code that turned on the jump label was only called by Xen specific functions. But now that it had been moved to the initcall machinery it gets called on Xen, KVM, and baremetal - ouch!. And the detection machinery to only call it on Xen wasn't remembered in the heat of merge window excitement. This means that the slowpath is enabled on baremetal while it should not be. Reported-by: Waiman Long <waiman.long@hp.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> CC: stable@vger.kernel.org CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15xen-pciback: silence an unwanted debug printkDan Carpenter1-1/+2
There is a missing curly brace here so we might print some extra debug information. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15xen: fix memory leak in __xen_pcibk_add_pci_dev()Daeseok Youn1-0/+2
It need to free dev_entry when it failed to assign to a new slot on the virtual PCI bus. smatch says: drivers/xen/xen-pciback/vpci.c:142 __xen_pcibk_add_pci_dev() warn: possible memory leak of 'dev_entry' Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15irqchip: vic: Properly chain the cascaded IRQsLinus Walleij1-0/+6
We are flagging the parent IRQ as chained, then we must also make sure to call the chained_irq_[enter|exit] functions for things to work smoothly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: http://lkml.kernel.org/r/1397550484-7119-1-git-send-email-linus.walleij@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-15x86/xen: Fix 32-bit PV guests's usage of kernel_stackBoris Ostrovsky2-9/+19
Commit 198d208df4371734ac4728f69cb585c284d20a15 ("x86: Keep thread_info on thread stack in x86_32") made 32-bit kernels use kernel_stack to point to thread_info. That change missed a couple of updates needed by Xen's 32-bit PV guests: 1. kernel_stack needs to be initialized for secondary CPUs 2. GET_THREAD_INFO() now uses %fs register which may not be the kernel's version when executing xen_iret(). With respect to the second issue, we don't need GET_THREAD_INFO() anymore: we used it as an intermediate step to get to per_cpu xen_vcpu and avoid referencing %fs. Now that we are going to use %fs anyway we may as well go directly to xen_vcpu. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15perf tools: Instead of redirecting flex output, use -oCody P Schafer1-2/+2
This gives us a real filename instead of having '<stdout>' show up all over the place when debugging. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1396652539-2416-1-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-15perf tools: Fix double free in perf test 21 (code-reading.c)Adrian Hunter1-0/+1
perf_evlist__delete() deletes attached cpu and thread maps but the test is still using them, so remove them from the evlist before deleting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/53465E3E.8070201@intel.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-15video: bf54x-lq043fb: fix build errorSteven Miao1-1/+1
Fix build error by including linux/gpio.h. Also drop asm/gpio.h which is not needed. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-15driver/net: cosa driver uses udelay incorrectlyLi, Zhen-Hua1-4/+0
In cosa driver, udelay with more than 20000 may cause __bad_udelay. Use msleep for instead. Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15at86rf230: fix __at86rf230_read_subreg functionAlexander Aring1-1/+1
The __at86rf230_read_subreg function don't mask and shift register contents which it should do. This patch adds the necessary masks and shift operations in this function. Since we have csma support this can make some trouble on state changes. Since CSMA support turned on some bits in the TRX_STATUS register that used to be zero, not masking broke checking of the TRX_STATUS field after commanding a state change. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15at86rf230: remove check if AVDD settledAlexander Aring1-8/+0
The AVDD regulator is only enabled when the RF section is active TX_ON (PLL_ON) state. Since commit 7dcbd22a97eb0689e6c583ad630ae0e7341e34c1 ("ieee802154: ensure that first RF212 state comes from TRX_OFF"). We are in TRX_OFF state at the time at86rf230_hw_init is run. Note that this test would only fail in case of a severe hardware malfunction (faulty/shorted power supply, etc.) so it wasn't all that useful in the first place. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15net: cadence: Add architecture dependenciesJean Delvare1-3/+3
The Cadence ethernet chipsets are only used on specific ARM architectures. Add Kconfig dependencies so that drivers for these chipsets are only buildable on the relevant architectures. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-29/+113
Pull KVM fixes from Marcelo Tosatti: - Fix for guest triggerable BUG_ON (CVE-2014-0155) - CR4.SMAP support - Spurious WARN_ON() fix * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove WARN_ON from get_kernel_ns() KVM: Rename variable smep to cr4_smep KVM: expose SMAP feature to guest KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode KVM: Add SMAP support when setting CR4 KVM: Remove SMAP bit from CR4_RESERVED_BITS KVM: ioapic: try to recover if pending_eoi goes out of range KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)