summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-03-16Merge tag 'topic/drm-misc-2016-03-14' of ↵Dave Airlie31-292/+536
git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits) drm: atomic helper: do not unreference error pointer drm/edid: Extract SADs properly from multiple audio data blocks drm: fix blob pointer check drm: introduce pipe color correction properties drm/atomic: Clean up update_connector_routing. drm/atomic: Clean up steal_encoder, v2. drm/atomic: Handle encoder assignment conflicts in a separate check, v3. drm/atomic: Handle encoder stealing from set_config better. drm/atomic: Always call steal_encoder, v2. drm/ast: removed optional dummy crtc mode_fixup function. drm/bochs: removed optional dummy crtc mode_fixup function. drm/fsl-dcu: removed optional dummy crtc mode_fixup function. drm/virtio: removed optional dummy crtc mode_fixup function. drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function. drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function. drm/sti: removed optional dummy crtc mode_fixup function. drm/shmobile: removed optional dummy crtc mode_fixup function. drm/msm/mdp: removed optional dummy crtc mode_fixup function. drm/omapdrm: removed optional dummy crtc mode_fixup function. drm/rcar-du: removed optional dummy crtc mode_fixup function. ...
2016-03-16Merge tag 'drm-amdkfd-next-fixes-2016-03-15' of ↵Dave Airlie1-1/+1
git://people.freedesktop.org/~gabbayo/linux into drm-next * tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
2016-03-16drm/omap: fix panel/encoder probesTomi Valkeinen2-2/+2
The recent changes which removed platform data support from panels & encoders had a few mistakes, causing probes of DVI connector and DSI command mode panels to fail every time due to missing '!'. Fix the if()s. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-03-15drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()Dan Carpenter1-1/+1
At the end of the function we expect "status" to be zero, but it's either -EINVAL or uninitialized. Fixes: 788bf83db301 ('drm/amdkfd: Add wave control operation to debugger') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2016-03-15Merge tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux into drm-nextDave Airlie7-57/+193
This pull request covers what's left for 4.6. Notably, it includes a significant 3D performance improvement and a fix to HDMI hotplug detection for the Pi2/3. * tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux: drm/vc4: Recognize a more specific compatible string for V3D. dt-bindings: Add binding docs for V3D. drm/vc4: Return -EFAULT on copy_from_user() failure drm/vc4: Respect GPIO_ACTIVE_LOW on HDMI HPD if set in the devicetree. drm/vc4: Let gpiolib know that we're OK with sleeping for HPD. drm/vc4: improve throughput by pipelining binning and rendering jobs
2016-03-14drm/vc4: Recognize a more specific compatible string for V3D.Eric Anholt1-0/+1
The Raspberry Pi Foundation's firmware updates are shipping device trees using the old string, so we'll keep recognizing that as this rev of V3D. Still, we should use a more specific name in the upstream DT to clarify which board is being supported, in case we do other revs of V3D in the future. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-14dt-bindings: Add binding docs for V3D.Eric Anholt1-0/+12
This was missed in the upstreaming process. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-14Merge branch 'linux-4.6' of git://github.com/skeggsb/linux into drm-nextDave Airlie145-6512/+9146
- GM20x secure boot support (hence, acceleration, finally \o/) - GM200 support - GM20B clock driver - Support for power sensors on some GPUs - Various other fixes all over the place * 'linux-4.6' of git://github.com/skeggsb/linux: (95 commits) drm/nouveau/clk/gm20b: add basic driver drm/nouveau/clk/gk20a: share reusable structures/functions drm/nouveau/clk/gk20a: set lowest frequency during init() drm/nouveau/clk/gk20a: split gk20a_clk_new() drm/nouveau/clk/gk20a: abstract pl_to_div drm/nouveau/clk/gk20a: put mnp values into their own struct drm/nouveau/clk/gk20a: emit parent rate as debug message drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed drm/nouveau/clk/gk20a: only compute n_lo if needed drm/nouveau/clk/gk20a: fix VCO bit mask drm/nouveau/clk/gk20a: rename enable/disable functions drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp() drm/nouveau/clk/gk20a: convert parameters to Khz drm/nouveau/volt: add GM20B driver drm/nouveau/volt/gk20a: split constructor drm/nouveau/volt/gk20a: share reusable members & functions drm/nouveau/ce/gm107: expose MaxwellDmaCopyA drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE ...
2016-03-14drm/nouveau/clk/gm20b: add basic driverAlexandre Courbot4-0/+201
Add a basic clock driver that reuses the GK20A logic. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: share reusable structures/functionsAlexandre Courbot2-36/+73
Make functions/structures that the GM20B driver will reuse public. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: set lowest frequency during init()Alexandre Courbot1-2/+5
Err on the safe side by setting the lowest frequency (and thus voltage) during device init. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: split gk20a_clk_new()Alexandre Courbot1-12/+31
This allows to instanciate drivers that use the same logic as gk20a with different parameters. Add a constructor function to allow other chips that inherit from this clock to easily initialize its members Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: abstract pl_to_divAlexandre Courbot1-21/+36
pl_to_div may be done differently depending on the chip. Abstract this operation so the same logic can be reused for them as well. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: put mnp values into their own structAlexandre Courbot1-31/+36
This allows us to read them using one single function and will be handy to the GM20B driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: emit parent rate as debug messageAlexandre Courbot1-2/+2
Most users are probably not interested in this information. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: only restore divider to 1:1 if neededAlexandre Courbot1-3/+10
Only restore the 1:1 divider if it is not set already. Also use the proper masks for this operation and add a second write as done in the Android code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: only compute n_lo if neededAlexandre Courbot1-3/+5
n_lo is used if we are going to slide. Compute it only if that condition succeeds to avoid confusion about future usage of this computation. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: fix VCO bit maskAlexandre Courbot1-1/+2
Fix the mask specified to switch to VCO mode was given as an (incorrect) immediate value. Although the side-effect happens to be the same, this is clearly incorrect. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: rename enable/disable functionsAlexandre Courbot1-28/+24
gk20a_pllg_disable() is only used in the context of gk20a_clk_fini(). Move its body there and rename _gk20a_pllg_enable() and _gk20a_pllg_disable() to non-underscored versions. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()Alexandre Courbot1-4/+8
Move some variables declarations to the scope where they are actually used to make the code easier to follow. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: convert parameters to KhzAlexandre Courbot1-15/+17
Perform computations in Khz instead of Mhz for better precision. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt: add GM20B driverAlexandre Courbot4-0/+59
Add basic GM20B volt driver that reuses the GK20A logic. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt/gk20a: split constructorAlexandre Courbot2-12/+25
Split the constructor function so we can reuse the same logic in other chips. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt/gk20a: share reusable members & functionsVince Hsu2-18/+51
The CVB calculation and voltage setting functions can be reused for the future chips. So move the declaration to gk20a.h. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/ce/gm107: expose MaxwellDmaCopyABen Skeggs4-2/+59
The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channelsBen Skeggs4-1/+49
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoBBen Skeggs9-2/+89
This class supports a WFI method (0x0078) that's not present on the KeplerChannelGpfifoA class. The binary driver exposes both classes on these GPUs for some reason, though there doesn't appear to be any difference in the setup that's done for each (ie. even if you allocate GpfifoA, the WFI method will still work). We shall just expose GpfifoB, as I don't see a good reason to report the presence of both. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICEBen Skeggs1-1/+2
Prevents the same interrupt from re-triggering forever. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add vic plumbingBen Skeggs2-0/+3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add sec plumbingBen Skeggs2-0/+3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add nvdec plumbingBen Skeggs3-0/+4
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add nvenc plumbingBen Skeggs3-7/+25
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add msenc plumbingBen Skeggs1-0/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add vic plumbingBen Skeggs4-0/+7
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add nvdec plumbingBen Skeggs7-0/+13
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add nvenc plumbingBen Skeggs7-21/+41
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add msenc plumbingBen Skeggs3-0/+6
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: sort engine indices alphabeticallyBen Skeggs1-14/+17
Unlike subdevs, these aren't initialised in a defined order. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info during gpfifo constructionBen Skeggs5-64/+127
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info during fault recoveryBen Skeggs2-34/+26
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info when handling ctxsw timeoutBen Skeggs1-20/+9
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: read device topology information from hwBen Skeggs3-5/+103
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: cosmetic engine->runlist changesBen Skeggs4-48/+50
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: don't attempt recovery of unknown mmu enginesBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: identify fault-recovery members more clearlyBen Skeggs2-10/+12
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: rename spoon to pbdma, and move detection to oneinitBen Skeggs2-10/+14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: fix certain engines not being recovered after a faultBen Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: don't attempt recovery of unknown mmu enginesBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: identify fault-recovery members more clearlyBen Skeggs2-10/+12
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: rename spooon to pbdma, and move detection to oneinitBen Skeggs2-12/+17
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-05 18:15:14 +0300