summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-08-14cfg80211: fix nl80211 disconnected eventsJohannes Berg1-2/+2
When reporting a disconnection to userspace, we try to report whether it was from the AP or by our own choice. However, we misreported a broadcast deauth or disassoc as being by own choice, which is wrong. Fix this by checking the sender address instead of the destination address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: stay authenticated after disassocJohannes Berg2-9/+23
After being disassociated by the AP, mac80211 currently reports this to cfg80211, and then goes to delete the association. That's fine, but cfg80211 assumes that it's still authenticated, however, mac80211 throws away all state. This fixes mac80211 to keep track of the authentication in that case so that cfg80211 can request a deauth or new association properly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1271: add wl1271 to Kconfig and the MakefileLuciano Coelho2-0/+18
This patch adds support for the wl1271 driver in the Kconfig and in the Makefile. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1271: add wl1271 driver filesLuciano Coelho23-0/+9431
This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix disassociation warning due to misuse of wdev->current_bssPavel Roskin1-1/+1
WARN_ON was triggered at mlme.c:213 when dissociating from an AP. wdev->current_bss->pub.bssid should be used in place of wdev->current_bss for BSSID comparison. Signed-off-by: Pavel Roskin <proski@gnu.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: consolidate storage of WEP and TKIP keysDavid Kilroy4-62/+139
When TKIP support was added, we stored the keys separately to avoid issues when both TKIP and WEP keys are sent to the driver. We need to consolidate the storage to convert to cfg80211, so do this first and try iron out the issues. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: add function to retrieve current bssidDavid Kilroy3-3/+15
We will need this from the cfg80211 disassociate call. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: move disassociation to hw.cDavid Kilroy3-13/+30
This allows the disassociation to be called via cfg80211. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: pass orinoco_set_tkip_key the sequence lengthsDavid Kilroy3-14/+21
When we store the keys for cfg80211, the sequence lengths will also be stored. So avoid assuming the sequence lengths at this level. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: use local types for auth alg and sequence lengthDavid Kilroy4-25/+33
This helps in the refactorring required to convert the driver to cfg80211. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: prefer_port3 can be a single bitDavid Kilroy1-1/+1
This is a boolean value set based on firmware capabilities, so move the variable to the capabilities section and reduce the structure size. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wireless: display wext SSID when connected by cfg80211Zhu Yi1-1/+9
cfg80211 displays correct link info when connected by wext. But if the connection is setup by cfg80211, wext cannot display the SSID. This patch fixed this issue. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: Fix fallout from the IEEE80211_IF_TYPE to NL80211_IFTYPE change.Gábor Stefanik1-1/+1
Update a comment that still says IEEE80211_IF_TYPE instead of NL80211_IFTYPE. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: remove wrong probe_resp_plcp writegregor kowski1-114/+0
The tkip hw support uncovered a bug in b43_write_probe_resp_template : it is writing at the wrong shm offset, it is in the B43_SHM_SH_TKIPTSCTTAK zone. Remove b43_write_probe_resp_template, b43_write_probe_resp_plcp and b43_write_probe_resp_plcp because the probe response offload is currently not supported by mac80211. Signed-off-by: Gregor Kowski <gregor.kowski@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: Typo fixes & minor cleanupGábor Stefanik2-2/+2
Make use of HostFlags defines in the LP-PHY code. Fix fallout from the IEEE80211_IF_TYPE to NL80211_IFTYPE change. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: fix compilation of mesh (although its disabled)Luis R. Rodriguez2-7/+7
Mesh is currently disabled on mac80211, its marked as broken. This patch gets it to compile though, to account for the mac80211 workqueue changes. There was a simple typo in the patches for mesh for the workqueue migration, but we never compile tested it as we couldn't even select mesh as its broken. Lets at least let it compile for those interested in getting it fixed. Reported-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14b43: Add LP 2063 radio initGábor Stefanik3-56/+386
Add B2063 radio init code and tables for LP-PHY. Rename structures common between B2062 and B2063 to B206X. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14zd1211rw: make it clear we don't use leds.h LED stuffLuis R. Rodriguez3-8/+8
zd1211rw uses its own LED stuff so let rename its LED stuff as such. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: use new FIF_PSPOLL configure filterLuis R. Rodriguez1-2/+1
We used to set pspoll filter on ath9k on AP mode but we no longer need this mode specific check as mac80211 now does the check for us and informs us when we should enable pspoll through FIF_PSPOLL. Cc: Igor Perminov <igor.perminov@inbox.ru> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath5k: fix missing output in monitor mode after ifconfig upJoerg Albert1-20/+15
Let ath5k_chan_set() always call ath5k_reset(). This fixes the bug that we don't get any packets in monitor mode after: ifconfig wlan0 down iwconfig wlan0 mode monitor channel 1 ifconfig wlan0 up but they arrive after iwconfig wlan0 channel 2 Signed-off-by: Joerg Albert <jal2@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-13bnx2x: update version to 1.52.1Eilon Greenstein1-2/+2
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Whitespaces and commentsEilon Greenstein4-115/+121
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Removing unused definitionsEilon Greenstein1-811/+0
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Beautify bnx2x_dump.hEilon Greenstein1-441/+449
Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Re-factor the initialization codeEilon Greenstein5-464/+495
Moving the code to a more logical place and beautifying it. No real change in behavior. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Using PCI_DEVICE macroEilon Greenstein1-6/+3
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Adding explicit castingEilon Greenstein1-3/+3
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Using macro for phy addressEilon Greenstein3-89/+39
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Re-arrange the link structures for better alignmentEilon Greenstein2-15/+22
Change ieee_fc to u16 instead of u32 and re-arrange the link parameters structures Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Missing smp_wmb for statistics state machineEilon Greenstein1-0/+3
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Remove SGMII configuration when not requiredEilon Greenstein1-3/+10
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Keep only one HW path activeEilon Greenstein1-3/+4
Disable bmac access while working with emac and keep the single lane SerDes in reset while working with 4 lanes XGXS Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Check unzip return codeEilon Greenstein1-1/+3
Without this check, when running out of memory, we will see PSOD's in bnx2x_init_fill() when doing a memset(). This is because at that time, bp->gunzip_buf is not pointing to a valid allocated space. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Remove the init_dmae field from bpEilon Greenstein2-48/+47
Moved the dmae_command from the heap to the stack. This will save 56 bytes per bnx2x structure. As a side benefit, we can also reduce the time the dmae_mutex is held. This is because do we not need to hold this mutex when setting up the dmae command. The memory where is dmae command is stored is not a shared resource and doesn not need to be protected. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Updating regdump_len at drvinfoEilon Greenstein1-36/+33
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Move printing of version from probe to the initEilon Greenstein1-4/+2
Move printing of version from probe to the init function Rather then checking if this is the first module probe call to print the version of the driver only once, the statement is moved to the init function of the module where init is only called once Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Combine get_pcie_width and get_pcie_speedEilon Greenstein1-18/+16
The functions bnx2x_get_pcie_width() and bnx2x_get_pcie_speed() were combined into bnx2x_get_pcie_width_speed() so that there is only 1 PCI read to PCICFG_OFFSET + PCICFG_LINK_CONTROL rather then 2 reads. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Stop loading if error condition detectedEilon Greenstein2-0/+9
Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Calling pci_set_drvdata earlierEilon Greenstein1-2/+2
In case of error, bnx2x_init_dev calls pci_set_drvdata(pdev, NULL) Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Configurable pause schemeEilon Greenstein2-4/+12
When a given ring is running out of space, the FW can send pause towards the network. When working with multi-queues, when one queue is getting out of space it can block all other queues. The preferred scheme is to send pause frames only when running out of the shared internal chip buffers and if a given queue cannot place a packet on the host, it will drop it. Since some users might want to work in drop-less mode, allowing changing the behavior as a module parameter. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Adding Likely directiveEilon Greenstein1-1/+2
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Prefetch the page containing the BD descriptorEilon Greenstein1-0/+7
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Reporting host statistics to management FWEilon Greenstein2-53/+176
This is required for NCSI statistics Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Removing old PHY FW upgrade codeEilon Greenstein2-429/+0
This code should not have resided in the driver. Now that we have a new interface, this logic can reside in the application that whishes to upgrade the PHY FW Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Supporting PHY FW upgradeEilon Greenstein3-30/+67
There are 3 operations that the driver needs to support to allow applications to access the PHY FW (on top of the MDC/MDIO access). Since those are essentially nvram access commands, adding them to the ethtool -E interface. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: MDC/MDIO CL45 IOCTLsEilon Greenstein3-37/+88
As suggested by Ben Hutchings <bhutchings@solarflare.com>, using the MDC/MDIO IOCTL Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Adding XAUI CL73 autoneg supportEilon Greenstein2-30/+180
Adding CL73 support to the built in PHY in the 5771x device. Also supporting fallbacks to CL73 if the link partner does not respond. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: BCM8727 FW loadEilon Greenstein1-7/+9
The BCM8727 is a dual port PHY. The FW must be loaded in a given order on all designs - including those which swapped the ports (calling port number zero the second port) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: get_ext_phy_fw_version returns NULL if not applicableEilon Greenstein1-2/+4
To avoid confusion, if the PHY does not have a FW (and so, no FW version) make sure that the string is NULL. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bnx2x: Reading the FW version of the BCM8481 PHYEilon Greenstein1-5/+113
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-27 12:40:42 +0300