summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-02-18cfg80211: add correct docbook entriesJohannes Berg1-2/+2
Update the 802.11 book to list the correct data structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: Fix incorrect use of STA_PR_FMT in trace pointsSeth Forshee1-3/+3
Several tracepoints are using STA_PR_FMT where STA_PR_ARG should be used, resulting in messages like "phy0 sta:ARG TYPE NOT FIELD BUT 1". Change these to STA_PR_ARG. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: enable vif.cab_queue for meshBob Copeland1-1/+2
Since mesh powersaving was added, pending bcast/mcast frames may go out the CAB queue now. Unfortunately, the queue was only set up for AP mode, so we would try to tx on the IEEE80211_INVAL_HW_QUEUE. Allow cab_queue for mesh interfaces as well. Fixes the following warning (or crash without MAC80211_VERBOSE_DEBUG): WARNING: at net/mac80211/tx.c:1223 __ieee80211_tx+0x162/0x35f [mac80211]() Modules linked in: mac80211_hwsim mac80211 cfg80211 [...] Pid: 3085, comm: avahi-daemon Tainted: G W 3.8.0-rc1+ #377 Call Trace: [<ffffffff81045c20>] warn_slowpath_common+0x83/0x9c [<ffffffff81045c53>] warn_slowpath_null+0x1a/0x1c [<ffffffffa083aef0>] __ieee80211_tx+0x162/0x35f [mac80211] [<ffffffffa083cb1d>] ieee80211_tx+0xd3/0xf9 [mac80211] [<ffffffffa083cc0f>] ieee80211_xmit+0xcc/0xd5 [mac80211] [<ffffffffa083db59>] ieee80211_subif_start_xmit+0xc53/0xcd8 [mac80211] [<ffffffff81319acd>] dev_hard_start_xmit+0x259/0x3ce [<ffffffff81333d6b>] sch_direct_xmit+0x74/0x17d [<ffffffff8131a0b1>] dev_queue_xmit+0x230/0x414 [<ffffffff8134877a>] ip_finish_output2+0x348/0x3aa [<ffffffff81349029>] ip_finish_output+0x6c/0x71 [<ffffffff81349046>] NF_HOOK_COND.constprop.44+0x18/0x58 [<ffffffff8134a03a>] ip_mc_output+0x134/0x13c [<ffffffff8134835a>] dst_output+0x18/0x1c [<ffffffff81349a24>] ip_local_out+0x20/0x24 [<ffffffff8134a8cf>] ip_send_skb+0x16/0x3c [<ffffffff8136bfba>] udp_send_skb+0x254/0x2b9 [<ffffffff8136c85e>] udp_sendmsg+0x5a8/0x7d4 Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up mesh codeJohannes Berg10-263/+252
There's various code with strange indentation, questionable loop and locking constructs, etc. The bigger change is moving the "sdata" argument to the first argument of all functions, like all other mac80211 functions that have one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211_hwsim: ask mac80211 to reserve space for chanctx.drv_privKarl Beldan1-0/+1
Otherwise memory corruption occurs when using channel contexts (ATM when param 'channel' > 1). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: prevent spurious HT/VHT downgrade messageJohannes Berg1-0/+4
Even when connecting to an AP that doesn't support VHT, and even when the local device doesn't support it either, the downgrade message gets printed. Suppress the message if HT and/or VHT is disabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATEJohannes Berg2-3/+3
Adding the flag to mac80211 already without testing was clearly a mistake, one that we now pay for by having to reserve bit 13 forever. The problem is cfg80211 doesn't allow capability/rate changes for station entries that were added unassociated, so the station entries cannot be set up properly when marked associated. Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value to make it clear to userspace implementations that all current kernels don't actually support it, even though the previous bit is set, and of course also remove the flag from mac80211 until we test and fix the issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_stationJouni Malinen2-11/+85
The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: Pass station (extended) capability info to kernelJouni Malinen3-0/+54
The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: advertise operating mode notification capabilityJohannes Berg2-0/+11
Use the new extended capabilities advertising to advertise the fact that operating mode notification is supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: advertise extended capabilities to userspaceJohannes Berg3-0/+29
In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop modifying HT SMPS capabilityJohannes Berg11-48/+50
Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: generate mesh probe responsesThomas Pedersen2-2/+63
Mesh interfaces will now respond to any broadcast (or matching directed mesh) probe requests with a probe response. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: cache mesh beaconThomas Pedersen6-65/+171
Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: constify IE parsingJohannes Berg9-87/+96
Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15nl80211: advertise HT/VHT channel limitationsJohannes Berg3-1/+31
When drivers or regulatory have limitations on 40, 80 or 160 MHz channels, advertise these to userspace via nl80211. Also add a new feature flag to let userspace know this is supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: allow drivers to selectively disable 80/160 MHzJohannes Berg3-1/+32
Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: properly track HT/VHT operation changesJohannes Berg1-68/+168
A while ago, I made the mac80211 station code never change the channel type after association. This solved a number of issues but is ultimately wrong, we should react if the AP changes the HT operation IE and switches bandwidth. One of the issues is that we associate as HT40 capable, but if the AP ever switches to 40 MHz we won't be able to receive such frames because we never set our channel to 40 MHz. This addresses this and VHT operation changes. If there's a change that is incompatible with our setup, e.g. if the AP decides to change the channel entirely (and for some reason we still hear the beacon) we'll just disconnect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: move ieee80211_determine_chantype functionJohannes Berg1-195/+195
The next patch will need it further up in the file, so move it unchanged now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: add ieee80211_vif_change_bandwidthJohannes Berg3-0/+57
For HT and VHT the current bandwidth can change, add the function ieee80211_vif_change_bandwidth() to take care of this. It returns a failure if the new bandwidth isn't compatible with the existing channel context, the caller has to handle that. When it happens, also inform the driver that the bandwidth changed for this virtual interface (no drivers would actually care today though.) Changing to/from HT/VHT isn't allowed though. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up channel use in ieee80211_config_ht_txJohannes Berg1-11/+3
The channel use is confusing, some uses the channel context and some the bss_conf.chandef. The latter is fine, so get rid of the channel context part. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: disable HT/VHT if AP has no HT/VHT capabilityJohannes Berg1-2/+14
Having HT/VHT operation IEs but not capability IEs leads to a strange situation where we configure the channel to an HT or VHT bandwidth and then can't actually use it. Prevent this by checking that the HT and VHT capability IEs are present as well as the operation IEs; if not, disable HT and/or VHT. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: handle operating mode notif in beacon/assoc responseJohannes Berg5-6/+38
In beacons and association response frames an AP may include an operating mode notification element to advertise changes in the number of spatial streams it can receive. Handle this using the existing function that handles the action frame, but only handle NSS changes, not bandwidth changes which aren't allowed here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix ieee80211_change_chandef nameJohannes Berg1-3/+3
This should be called ieee80211_change_chanctx() since it changes the channel context, not a chandef. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix HT/VHT disable flagsJohannes Berg1-2/+2
The code to disable HT and VHT if VHT was advertised without VHT is wrong -- it accidentally uses the wrong flags. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: init HT TX data before rate controlJohannes Berg1-20/+19
In case of connection, the station data is initialised from the beacon/probe response first and then updated from the association response. If the latter is different we update the rate control algorithm and driver. Instead of doing it this way, set the station data properly with data from the association response before initializing rate control. Also simplify the code by passing the station pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: handle VHT operating mode notificationJohannes Berg7-10/+128
Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: track number of spatial streamsJohannes Berg4-0/+49
With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15wireless: define operating mode action frameJohannes Berg1-0/+37
Define the action frame format, the VHT category and its action types and the field format and EID for operating mode notifications. The frame may be used outside of VHT context as well, so don't include "VHT" in the names. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40Johannes Berg27-158/+184
For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_capJohannes Berg4-8/+9
Like with HT, make things a bit simpler in future patches by passing the station to ieee80211_vht_cap_ie_to_sta_vht_cap() instead of the vht_cap pointer. Also disable VHT here if HT isn't supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15Merge remote-tracking branch 'mac80211/master' into HEADJohannes Berg3-6/+10
2013-02-15mac80211: use spin_lock_bh() for TKIP lockJohannes Berg2-9/+6
Since no driver calls the TKIP functions from interrupt context, there's no need to use spin_lock_irqsave(). Just use spin_lock_bh() (and spin_lock() in the TX path where we're in a BH or they're already disabled.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: use spin_lock_bh() for tim_lockJohannes Berg2-7/+4
There's no need to use _irqsave() as the lock is never used in interrupt context. This also fixes a problem in the iwlwifi MVM driver that calls spin_unlock_bh() within its set_tim() callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: don't pick up WPA vendor IEJohannes Berg2-7/+1
There's no use for it, WPA is entirely handled in wpa_supplicant in userspace, so don't pick the IE. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: always unblock CSA queue stop when disconnectingJohannes Berg1-2/+2
In some cases when disconnecting after (or during?) CSA the queues might not recover, and then the only way to recover is reloading the module. Fix this by always unblocking the queue CSA reason when disconnecting. Cc: stable@vger.kernel.org Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: don't call bss_info_changed on p2p-device/monitorJohannes Berg2-9/+18
Since the idle decision rework, mac80211 started calling bss_info_changed() for the driver's monitor interface, which causes a crash for iwlwifi, but drivers generally don't expect this to happen. Therefore, avoid it. While at it, also prevent calling it in such cases and only print a warning. For the P2P Device interface the idle will no longer be called (no channel context), so also prevent that and warn on it. Reported-by: Chaitanya <chaitanya.mgit@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix auth/assoc timeout handlingJohannes Berg4-4/+25
In my commit 1672c0e31917f49d31d30d79067103432bc20cc7 ("mac80211: start auth/assoc timeout on frame status") I broke auth/assoc timeout handling: in case we wait for the TX status, it now leaves the timeout field set to 0, which is a valid time and can compare as being before now ("jiffies"). Thus, if the work struct runs for some other reason, the auth/assoc is treated as having timed out. Fix this by introducing a separate "timeout_started" variable that tracks whether the timeout has started and is checked before timing out. Additionally, for proper TX status handling the change requires that the skb->dev pointer is set up for all the frames, so set it up for all frames in mac80211. Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix ieee80211_sta_tx_notify for nullfuncWojciech Dubowik1-4/+5
Function ieee80211_sta_reset_conn_monitor has been resetting probe_send_count too early and nullfunc check was never called after succesfull ack. Reported-by: Magnus Cederlöf <mcider@gmail.com> Tested-by: Magnus Cederlöf <mcider@gmail.com> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: consolidate MBSS change notificationThomas Pedersen5-37/+55
A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix WPA with VLAN on AP side with ps-staMichael Braun1-0/+1
When sending a broadcast while at least on of the connected stations is sleeping, it gets queued and send after a DTIM beacon is sent. If the packet was to be sent on a vlan interface, the vif used for dequeing from the per-bss queue does not hold the per-vlan sdata. The correct sdata is required to use the correct per-vlan broadcast/multicast key. This patch fixes this by restoring the per-vlan sdata using the skb->dev entry. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: free ps->bc_buf skbs on vlan device stopMichael Braun1-0/+14
When the vlan device is removed, ps->bc_buf processing can no longer send its frames. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: add radar detection command/eventSimon Wunderlich11-1/+204
Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15nl80211/cfg80211: add radar detection command/eventSimon Wunderlich11-17/+570
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13cfg80211: configuration for WoWLAN over TCPJohannes Berg4-4/+474
Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13mac80211/minstrel_ht: add support for using CCK ratesFelix Fietkau5-60/+237
When MCS rates start to get bad in 2.4 GHz because of long range or strong interference, CCK rates can be a lot more robust. This patch adds a pseudo MCS group containing CCK rates (long preamble in the lower 4 slots, short preamble in the upper slots). Signed-off-by: Felix Fietkau <nbd@openwrt.org> [make minstrel_ht_get_stats static] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13cfg80211: check vendor IE length to avoid overrunLuciano Coelho1-4/+8
cfg80211_find_vendor_ie() was checking only that the vendor IE would fit in the remaining IEs buffer. If a corrupt includes a vendor IE that is too small, we could potentially overrun the IEs buffer. Fix this by checking that the vendor IE fits in the reported IE length field and skip it otherwise. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <coelho@ti.com> [change BUILD_BUG_ON to != 1 (from >= 2)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13nl80211: add packet offset information for wowlan patternAmitkumar Karwar3-30/+60
If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [refactor pattern sending] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12mac80211: allow driver to be stateless wrt. SMSP requestsEmmanuel Grumbach1-0/+3
Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12nl80211: minor correction in sample wowlan mask calculationAmitkumar Karwar1-1/+1
The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 22:35:33 +0300