summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-01-21[media] az6007: CodingStyle fixesMauro Carvalho Chehab1-14/+13
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Enable the driver at the building systemMauro Carvalho Chehab2-1/+11
Add the corresponding entries to allow building this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Use the right keycode for Terratec H7Mauro Carvalho Chehab2-1/+53
Instead of using a fake keycode, just for testing, use the right one, for Terratec H7. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Convert IR to use the rc_core logicMauro Carvalho Chehab1-23/+7
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix IR handlingMauro Carvalho Chehab1-18/+13
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Be sure to use kmalloc'ed buffer for transfersMauro Carvalho Chehab1-10/+17
USB data transfers may not work if the buffer is allocated at the stack. Be sure to use kmalloc on all places where a buffer is needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Protect read/write calls with a mutexMauro Carvalho Chehab1-60/+62
This will avoid interference with CI and IR I/O operations. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Driver cleanupMauro Carvalho Chehab1-43/+13
Remove commented test code, remove unused poweroff stuff, and fix the copyright data. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: code cleanups and fixesMauro Carvalho Chehab1-65/+83
Several changes were needed to make az6007 to work, producing the same commands as the original driver. This patch does that. While here, be less verbose when debug is not enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] drxk: Allow enabling MERR/MVAL cfgMauro Carvalho Chehab4-2/+13
Those two settings are different when used with az6007. Add a config option to enable it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] drxk: add support for Mpeg output clock drive strength configMauro Carvalho Chehab3-9/+10
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Use DRX-K dynamic clock modeMauro Carvalho Chehab1-4/+5
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] drxk: Allow setting it on dynamic_clock modeMauro Carvalho Chehab2-12/+19
This is used on az6007. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Use a per device private structMauro Carvalho Chehab1-6/+5
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Change it to use the MFE solution adopted at dvb-usbMauro Carvalho Chehab1-25/+17
This driver were written to use a previous solution for MFE at dvb-usb. Due to the internal API changes, change the binding to work with the new way. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Use the new MFE support at dvb-usbMauro Carvalho Chehab1-36/+38
Use the newly dvb-usb MFE support added by changeset 9bd9e3bd2c57530dfe3057dd0aa9bdb37824925d. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: improve the error messages for az6007 read/write callsMauro Carvalho Chehab1-4/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix IR receive codeMauro Carvalho Chehab1-11/+26
The code still needs to be commented, as there's a mutex missing at the az6007_read() call. A mutex there is needed, in order to prevent RC (or CI) calls while other operations are in progress. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Simplify the code by removing an uneeded functionMauro Carvalho Chehab1-29/+0
Everything to reset the demod is already at az6007_frontend_poweron(). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Simplify the read/write logicMauro Carvalho Chehab1-98/+87
This patch introduces no functional changes. It basically defines a macro for each different req found at the driver, and cleans the code to use them, making easier to understand the code. With regards to the IR handling code, although the original code doesn't define what's the request, it is clear, from the USB logs, that 0xc5 is for IR polling. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Change the az6007 read/write routine parameterMauro Carvalho Chehab1-28/+28
Use usb_device for those routines, as it allows using them on all places. While there, rename to better express the meaning. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix some init sequences and use the right firmwaresMauro Carvalho Chehab1-62/+43
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: need to define drivers name before including dvb-usb.hMauro Carvalho Chehab1-1/+1
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] drxk: Don't assume a default firmware nameMauro Carvalho Chehab4-6/+8
Move the ngene/ddbridge firmware into their drivers. There are two reasons for that: 1) The firmware used there didn't work for a few devices I tested here (Terratec H5, H6 and H7); 2) At least Terratec H7 doesn't seem to require a firmware for it to work. After this change, if firmware is not specified, the driver will use a rom-based firmware (this seems to be the case for Terratec H7, although I need to better check the USB dumps to be sure about that). In any case, the firmware seems to be optional, as the DRX-K driver don't return the firmware load error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: make driver less verboseMauro Carvalho Chehab1-18/+17
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: move device PID's to the proper placeMauro Carvalho Chehab2-4/+2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Replace the comments at the beginning of the driverMauro Carvalho Chehab1-3/+20
The comments there is wrong. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Get rid of az6007.hMauro Carvalho Chehab2-20/+9
The header file serves for no purpose and exports some things that should be static. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: CodingStyle cleanupMauro Carvalho Chehab1-119/+120
make checkpatch.pl happy Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Remove some dead code that doesn't seem to be neededMauro Carvalho Chehab1-63/+16
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Comment the gate_ctl mutexMauro Carvalho Chehab1-1/+5
The mutex is there to protect the I2C gate. However, for some reason, it is being called twice: [ 2103.542796] usbcore: registered new interface driver dvb_usb_az6007 [ 2103.772392] az6007: drxk_gate_ctrl: enable [ 2103.793900] az6007: drxk_gate_ctrl: enable For now, let's just comment, to allow the driver to run. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix the I2C code in order to handle mt2063Mauro Carvalho Chehab1-17/+30
mt2063 uses a one-byte transfer. This requires a special handling inside the i2c code. Fix it to properly accept i2c reads. This is needed to make the mt2063 to be detected. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix it to allow loading it without crashMauro Carvalho Chehab1-92/+98
Add some fixes to allow frontend attachment. The patch is not complete yet, as just the frontend 0 is initialized. So, more changes will be needed, including some changes at dvb-usb core. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] az6007: Fix compilation troubles at az6007Mauro Carvalho Chehab2-72/+104
Some changes are needed, in order to make az6007 compile with the upstream tree. Most of the changes are due to the upstream drxk module. Even allowing its compilation, the driver is not working yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21[media] dvb: Add a new driver for az6007Mauro Carvalho Chehab2-0/+645
Import the az6007 driver from Terratec H7 source, as-is. It won't compile or run, so latter patches are needed in order to fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] as3645a: Fix compilation by including slab.hLaurent Pinchart1-0/+1
The as3645a driver calls kzalloc(). Include slab.h. Reported-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.cSachin Kamat1-1/+0
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] s5p-mfc: Remove linux/version.h include from s5p_mfc.cSachin Kamat1-1/+0
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] ds3000: using logical && instead of bitwise &Dan Carpenter1-1/+1
The intent here was to test if the FE_HAS_LOCK was set. The current test is equivalent to "if (status) { ..." Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] v4l2-ctrls: make control names consistentHans Verkuil1-27/+27
Several control names used inconsistent capitalization or were inconsistent in other ways. I also corrected a spelling mistake and fixed four strings that were too long (>31 characters). Harmless, but the string is cut off when it is returned with QUERYCTRL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] DVB: dib0700, add support for Nova-TD LEDsJiri Slaby2-1/+42
Add an override of read_status to intercept lock status. This allows us to switch LEDs appropriately on and off with signal un/locked. The second phase is to override sleep to properly turn off both. This is a hackish way to achieve that. Thanks to Mike Krufky for his help. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] DVB: dib0700, add corrected Nova-TD frontend_attachJiri Slaby1-2/+34
This means cut & paste from the former f. attach. But while at it write to the right GPIO to turn on the right LED. Also turn the other two off jsut for sure. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] DVB: dib0700, separate stk7070pd initializationJiri Slaby1-8/+14
The start is common for both stk7070pd and novatd specific routine. This is just a preparation for the next patch. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] DVB: dib0700, move Nova-TD Stick to a separate setJiri Slaby1-5/+52
To properly support the three LEDs which are on the stick, we need a special handling in the ->frontend_attach function. Thus let's have a separate ->frontend_attach instead of ifs in the common one. The hadnling itself will be added in further patches. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] : add MODULE_FIRMWARE to dib0700Patrick Boettcher1-0/+1
The dib0700 needs a binary firmware file. This patch added the MODULE_FIRMWARE-macro. Signed-off-by: Christoph Anton Mitterer <calestyo@scientia.net> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] DVB-CORE: remove superfluous DTV_CMDsPatrick Boettcher1-19/+0
This small patch removes superfluous DTV_CMDs from dvb_frontend.c which were added in the initially when ISBD-T support was added. They were there unnoticed even though compilers should have warning about those duplicates. Finally they did and now we can remove them. Thanks to Dan Carpenter <dan.carpenter@oracle.com> for pointing that out. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] s5p-jpeg: adapt to recent videobuf2 changesMarek Szyprowski1-3/+4
queue_setup callback has been extended with struct v4l2_format *fmt parameter in 2d86401c2c commit. This patch adds this parameter to s5p-jpeg driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] s5p-g2d: fixed a bug in controls setting functionKamil Debski1-0/+1
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] s5p-mfc: Fix volatile controls setupKamil Debski1-1/+1
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-18[media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double testJulia Lawall1-1/+1
Rewrite a duplicated test to test the correct value The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-02 09:34:41 +0300