summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-18Linux 3.18.100v3.18.100Greg Kroah-Hartman1-1/+1
2018-03-18fixup: sctp: verify size of a new chunk in _sctp_make_chunk()Greg Kroah-Hartman1-1/+1
Ben writes: > > + int chunklen; > > + > > + chunklen = sizeof(*chunk_hdr) + paylen; > > I think this length still needs to be rounded up (with WORD_ROUND here, > instead of SCTP_PAD4 upstream). So here's a fix for this problem. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: 8250_pci: Add Brainboxes UC-260 4 port serial deviceNikola Ciprich1-0/+11
commit 9f2068f35729948bde84d87a40d135015911345d upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: usbmon: Read text within supplied buffer sizePete Zaitcev1-48/+78
commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream. This change fixes buffer overflows and silent data corruption with the usbmon device driver text file read operations. Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18USB: usbmon: remove assignment from IS_ERR argumentJulia Lawall1-2/+4
commit 46c236dc7d1212d7417e6fb0317f91c44c719322 upstream. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; statement S1,S2; @@ +e1 = e2; if (IS_ERR( e1 - = e2 )) S1 else S2 // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: quirks: add control message delay for 1b1c:1b20Danilo Krummrich3-1/+9
commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18staging: android: ashmem: Fix lockdep issue during llseekJoel Fernandes1-8/+7
commit cb57469c9573f6018cd1302953dd45d6e05aba7b upstream. ashmem_mutex create a chain of dependencies like so: (1) mmap syscall -> mmap_sem -> (acquired) ashmem_mmap ashmem_mutex (try to acquire) (block) (2) llseek syscall -> ashmem_llseek -> ashmem_mutex -> (acquired) inode_lock -> inode->i_rwsem (try to acquire) (block) (3) getdents -> iterate_dir -> inode_lock -> inode->i_rwsem (acquired) copy_to_user -> mmap_sem (try to acquire) There is a lock ordering created between mmap_sem and inode->i_rwsem causing a lockdep splat [2] during a syzcaller test, this patch fixes the issue by unlocking the mutex earlier. Functionally that's Ok since we don't need to protect vfs_llseek. [1] https://patchwork.kernel.org/patch/10185031/ [2] https://lkml.org/lkml/2018/1/10/48 Acked-by: Todd Kjos <tkjos@google.com> Cc: Arve Hjonnevag <arve@android.com> Cc: stable@vger.kernel.org Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com Signed-off-by: Joel Fernandes <joelaf@google.com> Acked-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18uas: fix comparison for error codeOliver Neukum1-1/+1
commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream. A typo broke the comparison. Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset") Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@kernel.org Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tty/serial: atmel: add new version check for usartJonas Danielsson1-0/+1
commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: sh-sci: prevent lockup on full TTY buffersUlrich Hecht1-0/+2
commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18x86: Treat R_X86_64_PLT32 as R_X86_64_PC32H.J. Lu3-0/+5
commit b21ebf2fb4cde1618915a97cc773e287ff49173e upstream. On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18x86/module: Detect and skip invalid relocationsJosh Poimboeuf1-0/+13
commit eda9cec4c9a12208a6f69fbe68f72a6311d50032 upstream. There have been some cases where external tooling (e.g., kpatch-build) creates a corrupt relocation which targets the wrong address. This is a silent failure which can corrupt memory in unexpected places. On x86, the bytes of data being overwritten by relocations are always initialized to zero beforehand. Use that knowledge to add sanity checks to detect such cases before they corrupt memory. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jeyu@kernel.org Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com [ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18scripts: recordmcount: break hardlinksRussell King1-0/+14
commit dd39a26538e37f6c6131e829a4a510787e43c783 upstream. recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18ubi: Fix race condition between ubi volume creation and udevClay McClure1-5/+10
commit a51a0c8d213594bc094cb8e54aad0cb6d7f7b9a6 upstream. Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by: Clay McClure <clay@daemons.net> Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pktFlorian Westphal1-0/+4
commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream. l4proto->manip_pkt() can cause reallocation of skb head so pointer to the ipv6 header must be reloaded. Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com> Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: bridge: ebt_among: add missing match size checksFlorian Westphal1-2/+19
commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream. ebt_among is special, it has a dynamic match size and is exempt from the central size checks. Therefore it must check that the size of the match structure provided from userspace is sane by making sure em->match_size is at least the minimum size of the expected structure. The module has such a check, but its only done after accessing a structure that might be out of bounds. tested with: ebtables -A INPUT ... \ --among-dst fe:fe:fe:fe:fe:fe --among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsetsFlorian Westphal1-1/+12
commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream. We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: IDLETIMER: be syzkaller friendlyEric Dumazet1-3/+6
commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream. We had one report from syzkaller [1] First issue is that INIT_WORK() should be done before mod_timer() or we risk timer being fired too soon, even with a 1 second timer. Second issue is that we need to reject too big info->timeout to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or risk looping, if result after overflow is 0. [1] WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x211/0x2d0 lib/bug.c:184 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988 RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 RSP: 0018:ffff8801db507538 EFLAGS: 00010006 RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404 RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082 RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6 R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488 queue_work include/linux/workqueue.h:488 [inline] schedule_work include/linux/workqueue.h:546 [inline] idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184 RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12 RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006 RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282 RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8 R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378 debug_object_init+0x17/0x20 lib/debugobjects.c:391 __init_work+0x2b/0x60 kernel/workqueue.c:506 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline] idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: nat: cope with negative port rangePaolo Abeni1-2/+5
commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream. syzbot reported a division by 0 bug in the netfilter nat code: divide error: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: 0018:ffff8801b2466778 EFLAGS: 00010246 RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900 R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153 R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30 get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362 nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406 nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124 redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41 nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302 nf_nat_ipv6_local_fn+0x33/0x5d0 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407 ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142 dccp_connect+0x369/0x670 net/dccp/output.c:564 dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946 __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x441c69 RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69 RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590 R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000 Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b 45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48 c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01 RIP: nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778 The problem is that currently we don't have any check on the configured port range. A port range == -1 triggers the bug, while other negative values may require a very long time to complete the following loop. This commit addresses the issue swapping the two ends on negative ranges. The check is performed in nf_nat_l4proto_unique_tuple() since the nft nat loads the port values from nft registers at runtime. v1 -> v2: use the correct 'Fixes' tag v2 -> v3: update commit message, drop unneeded READ_ONCE() Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack") Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: fix missing timer initialization in xt_LEDPaolo Abeni1-6/+6
commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream. syzbot reported that xt_LED may try to use the ledinternal->timer without previously initializing it: ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline] RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293 RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6 RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68 RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000 R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90 FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243 NF_HOOK include/linux/netfilter.h:286 [inline] ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491 ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633 addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb 57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3 57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70 RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8 RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8 ---[ end trace f661ab06f5dd8b3d ]--- The ledinternal struct can be shared between several different xt_LED targets, but the related timer is currently initialized only if the first target requires it. Fix it by unconditionally initializing the timer struct. v1 -> v2: call del_timer_sync() unconditionally, too. Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target") Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18ALSA: seq: More protection for concurrent write and ioctl racesTakashi Iwai4-13/+24
commit 7bd80091567789f1c0cb70eb4737aac8bcd2b6b9 upstream. This patch is an attempt for further hardening against races between the concurrent write and ioctls. The previous fix d15d662e89fc ("ALSA: seq: Fix racy pool initializations") covered the race of the pool initialization at writer and the pool resize ioctl by the client->ioctl_mutex (CVE-2018-1000004). However, basically this mutex should be applied more widely to the whole write operation for avoiding the unexpected pool operations by another thread. The only change outside snd_seq_write() is the additional mutex argument to helper functions, so that we can unlock / relock the given mutex temporarily during schedule() call for blocking write. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Reviewed-and-tested-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18ALSA: seq: Don't allow resizing pool in useTakashi Iwai1-0/+3
commit d85739367c6d56e475c281945c68fdb05ca74b4c upstream. This is a fix for a (sort of) fallout in the recent commit d15d662e89fc ("ALSA: seq: Fix racy pool initializations") for CVE-2018-1000004. As the pool resize deletes the existing cells, it may lead to a race when another thread is writing concurrently, eventually resulting a UAF. A simple workaround is not to allow the pool resizing when the pool is in use. It's an invalid behavior in anyway. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18x86/MCE: Serialize sysfs changesSeunghun Han1-1/+21
commit b3b7c4795ccab5be71f080774c45bbbcc75c2aaf upstream. The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18Input: matrix_keypad - fix race when disabling interruptsZhang Bo1-1/+3
commit ea4f7bd2aca9f68470e9aac0fc9432fd180b1fe7 upstream. If matrix_keypad_stop() is executing and the keypad interrupt is triggered, disable_row_irqs() may be called by both matrix_keypad_interrupt() and matrix_keypad_stop() at the same time, causing interrupts to be disabled twice and the keypad being "stuck" after resuming. Take lock when setting keypad->stopped to ensure that ISR will not race with matrix_keypad_stop() disabling interrupts. Signed-off-by: Zhang Bo <zbsdta@126.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18MIPS: BMIPS: Do not mask IPIs during suspendJustin Chen1-4/+4
commit 06a3f0c9f2725f5d7c63c4203839373c9bd00c28 upstream. Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17385/ [jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs] Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTShimanshu.madhani@cavium.com1-0/+1
commit 1514839b366417934e2f1328edb50ed1e8a719f5 upstream. This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <stable@vger.kernel.org> #4.4+ Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11Linux 3.18.99v3.18.99Greg Kroah-Hartman1-1/+1
2018-03-11dm io: fix duplicate bio completion due to missing ref countMike Snitzer1-0/+1
commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream. If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count. Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077 Reported-by: Zhang Yi <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11fib_semantics: Don't match route with mismatching tclassidStefano Brivio1-0/+5
[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ] In fib_nh_match(), if output interface or gateway are passed in the FIB configuration, we don't have to check next hops of multipath routes to conclude whether we have a match or not. However, we might still have routes with different realms matching the same output interface and gateway configuration, and this needs to cause the match to fail. Otherwise the first route inserted in the FIB will match, regardless of the realms: # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev eth0 scope link realms 1/2 1.1.1.1 dev eth0 scope link realms 3/4 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev ens3 scope link realms 3/4 whereas route with realms 3/4 should have been deleted instead. Explicitly check for fc_flow passed in the FIB configuration (this comes from RTA_FLOW extracted by rtm_to_fib_config()) and fail matching if it differs from nh_tclassid. The handling of RTA_FLOW for multipath routes later in fib_nh_match() is still needed, as we can have multiple RTA_FLOW attributes that need to be matched against the tclassid of each next hop. v2: Check that fc_flow is set before discarding the match, so that the user can still select the first matching rule by not specifying any realm, as suggested by David Ahern. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68Sabrina Dubroca1-2/+5
[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ] According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11sctp: verify size of a new chunk in _sctp_make_chunk()Alexey Kodanev1-2/+6
[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix IPA command submission raceJulian Wiedmann1-9/+10
[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix SETIP command handlingJulian Wiedmann2-6/+13
[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ] send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11sctp: fix dst refcnt leak in sctp_v6_get_dst()Alexey Kodanev1-3/+7
[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ] When going through the bind address list in sctp_v6_get_dst() and the previously found address is better ('matchlen > bmatchlen'), the code continues to the next iteration without releasing currently held destination. Fix it by releasing 'bdst' before continue to the next iteration, and instead of introducing one more '!IS_ERR(bdst)' check for dst_release(), move the already existed one right after ip6_dst_lookup_flow(), i.e. we shouldn't proceed further if we get an error for the route lookup. Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11udplite: fix partial checksum initializationAlexey Kodanev3-0/+11
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ppp: prevent unregistered channels from connecting to PPP unitsGuillaume Nault1-0/+9
[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ] PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11netlink: ensure to loop over all netns in genlmsg_multicast_allns()Nicolas Dichtel1-2/+10
[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ] Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e63756d5f was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: fix race on decreasing number of TX queuesJakub Kicinski1-2/+9
[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ] netif_set_real_num_tx_queues() can be called when netdev is up. That usually happens when user requests change of number of channels/rings with ethtool -L. The procedure for changing the number of queues involves resetting the qdiscs and setting dev->num_tx_queues to the new value. When the new value is lower than the old one, extra care has to be taken to ensure ordering of accesses to the number of queues vs qdisc reset. Currently the queues are reset before new dev->num_tx_queues is assigned, leaving a window of time where packets can be enqueued onto the queues going down, leading to a likely crash in the drivers, since most drivers don't check if TX skbs are assigned to an active queue. Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann1-1/+1
[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ] gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du1-1/+4
[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ] Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <dudenis2000@yahoo.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11bridge: check brport attr show in brport_showXin Long1-0/+3
[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ] Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file. Xiong found this issue when running the commands: ip link add br0 type bridge ip link add type veth ip link set veth0 master br0 chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush kernel crashed with NULL a pointer dereference call trace. This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store(). Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table") Reported-by: Xiong Zhou <xzhou@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11leds: do not overflow sysfs buffer in led_trigger_showNathan Sullivan1-5/+7
commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream. Per the documentation, use scnprintf instead of sprintf to ensure there is never more than PAGE_SIZE bytes of trigger names put into the buffer. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: fec: introduce fec_ptp_stop and use in probe fail pathLucas Stach3-3/+13
commit 32cba57ba74be58589aeb4cb6496183e46a5e3e5 upstream. This function frees resources and cancels delayed work item that have been initialized in fec_ptp_init(). Use this to do proper error handling if something goes wrong in probe function after fec_ptp_init has been called. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> [groeck: backport: context changes in .../fec_main.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ARM: mvebu: Fix broken PL310_ERRATA_753970 selectsUlf Magnusson1-2/+2
commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream. The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970, but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds"). Fix the selects to use the new name. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Fixes: fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds" cc: stable@vger.kernel.org Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()Viresh Kumar1-1/+7
commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ALSA: usb-audio: Add a quirck for B&W PX headphonesErik Veijola1-0/+47
commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by: Erik Veijola <erik.veijola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the busJeremy Boone1-2/+6
commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on ↵Jeremy Boone1-2/+3
the bus commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03Linux 3.18.98v3.18.98Greg Kroah-Hartman1-1/+1
2018-03-03net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu1-2/+1
[ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-06 06:33:16 +0300