| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
commit c6ebcedbab7ca78984959386012a17b21183e1a3 upstream.
Commit b6c159a9cb69 ("i2c: ismt: Don't duplicate the receive length for
block reads") broke I2C block reads. It aimed to fix normal SMBus block
read, but changed the correct behavior of I2C block read in the process.
According to Documentation/i2c/smbus-protocol, one vital difference
between normal SMBus block read and I2C block read is that there is no
byte count prefixed in the data sent on the wire:
SMBus Block Read: i2c_smbus_read_block_data()
S Addr Wr [A] Comm [A]
S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
I2C Block Read: i2c_smbus_read_i2c_block_data()
S Addr Wr [A] Comm [A]
S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
Therefore the two transaction types need to be processed differently in
the driver by copying of the dma_buffer as done previously for the
I2C_SMBUS_I2C_BLOCK_DATA case.
Fixes: b6c159a9cb69 ("i2c: ismt: Don't duplicate the receive length for block reads")
Signed-off-by: Pontus Andersson <epontan@gmail.com>
Tested-by: Stephen Douthit <stephend@adiengineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
Building the linux-3.16 stable branch, I ran into this warning that
shows a serious problem in the xen-netback driver:
drivers/net/xen-netback/netback.c: In function 'xenvif_dealloc_kthread':
drivers/net/xen-netback/netback.c:2002:1: error: the frame size of 16384 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
The bug was fixed in linux-4.4, but for any older stable kernel we
either need to backport that fix, or not use the driver when the page
size is set to 64KB. As the proper fix is way bigger than the usual limit
for stable backport patches, this adds a Kconfig dependency.
Fixes: d0089e8a0e4c ("net/xen-netback: Make it running on 64KB page granularity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 4d5b3bdc0ecb0cf5b1e1598eeaaac4b5cb33868d upstream.
Compiling mm/highmem.c gives a warning: passing argument 1 of
'virt_to_phys' makes pointer from integer without a cast
Fixed by casting to void*
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 30544af5483755b11bb5924736e9e0b45ef0644a upstream.
We were using s64 for lat_ns (latency nano-second value) since in
our calculations a negative value could be a resultant. For negative
values, we then assign lat_ns to be zero, so the value passed to
do_div() was never negative, but do_div() expects the argument type
to be u64, so do a cast to resolve a compile warning seen on
PowerPC.
CC: Yanjiang Jin <yanjiang.jin@windriver.com>
CC: Yanir Lubetkin <yanirx.lubetkin@intel.com>
Reported-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 2f5281ba2a8feaf6f0aee93356f350855bb530fc upstream.
cpmac_start_xmit() used the max() macro on skb->len (an unsigned int)
and ETH_ZLEN (a signed int literal). This led to the following compiler
warning:
In file included from include/linux/list.h:8:0,
from include/linux/module.h:9,
from drivers/net/ethernet/ti/cpmac.c:19:
drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit':
include/linux/kernel.h:748:17: warning: comparison of distinct pointer
types lacks a cast
(void) (&_max1 == &_max2); \
^
drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max'
len = max(skb->len, ETH_ZLEN);
^
On top of this, it assigned the result of the max() macro to a signed
integer whilst all further uses of it result in it being cast to varying
widths of unsigned integer.
Fix this up by using max_t to ensure the comparison is performed as
unsigned integers, and for consistency change the type of the len
variable to unsigned int.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 26f7c4bd05cf34e63a4a794150ab66a40a5a84a9 upstream.
These are generated by very recent toolchains and result in an error
message when attenpting to convert a kernel from ELF to ECOFF.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
kernelci found build error on the 3.16 and 3.18 stable trees that don't
show up in later versions:
arch/mips/jz4740/irq.h:21:38: error: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
arch/mips/jz4740/irq.h:20:39: error: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
include/linux/irqdesc.h:92:33: error: 'NR_IRQS' undeclared here (not in a function)
arch/mips/jz4740/irq.c:91:41: error: 'JZ4740_IRQ_BASE' undeclared (first use in this function)
arch/mips/jz4740/irq.c:68:6: error: conflicting types for 'jz4740_irq_resume'
arch/mips/jz4740/irq.c:62:6: error: conflicting types for 'jz4740_irq_suspend'
arch/mips/jz4740/irq.c:49:39: error: 'JZ4740_IRQ_BASE' undeclared (first use in this function)
arch/mips/jz4740/gpio.c:47:32: error: initializer element is not constant
arch/mips/jz4740/gpio.c:46:32: error: initializer element is not constant
arch/mips/jz4740/gpio.c:45:32: error: initializer element is not constant
arch/mips/jz4740/gpio.c:44:32: error: initializer element is not constant
arch/mips/jz4740/gpio.c:447:22: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
arch/mips/jz4740/gpio.c:446:23: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
arch/mips/jz4740/gpio.c:427:14: error: implicit declaration of function 'JZ4740_IRQ_INTC_GPIO' [-Werror=implicit-function-declaration]
arch/mips/jz4740/gpio.c:269:9: error: implicit declaration of function 'JZ4740_IRQ_GPIO' [-Werror=implicit-function-declaration]
The problem seems to be caused by commit 83bc76920080 ("MIPS: JZ4740: Use
generic irq chip") from linux-3.2, but only showed up in a defconfig
build when qi_lb60_defconfig was added in linux-3.13 and that configuration
never successfully built.
The code has changed in a number of ways before 4.4, which builds fine.
While I did not bisect the problem to a specific change, I found a simple
fix by including the obviously missing header.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 86038c5ea81b519a8a1fcfcd5e4599aab0cdd119 upstream.
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.
The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.
Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.
This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.
Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.
We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).
One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 2630628b2dbc3fc320aafaf84836119e4e3d62f1 upstream.
Apparently we now implicitly get definitions for BITS_PER_PAGE and
BITS_PER_PAGE_MASK from the pid_namespace.h
Instead of renaming our defines, I chose to define only if not yet
defined, but to double check the value if already defined.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit d09957fbb4d0b059b3176b510540df69048ad170 upstream.
The cfi_staa_write_buffers function uses a large amount of kernel stack
whenever CONFIG_MTD_MAP_BANK_WIDTH_32 is set, and that results in a
warning on ARM allmodconfig builds:
drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers':
drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=]
It turns out that this is largely a result of a suboptimal implementation
of map_word_andequal(). Replacing this function with a straightforward
one reduces the stack size in this function by exactly 200 bytes,
shrinks the .text segment for this file from 27648 bytes to 26608 bytes,
and makes the warning go away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
In stable/linux-3.16.y, we get a warning for 64-bit architectures:
drivers/staging/rtl8192ee/pci.c: In function '_rtl_pci_rx_interrupt':
include/linux/kern_levels.h:4:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'sk_buff_data_t {aka unsigned char *}' [-Wformat=]
include/linux/kern_levels.h:4:18: warning: format '%d' expects argument of type 'int', but argument 3 has type 'sk_buff_data_t {aka unsigned char *}' [-Wformat=]
The driver was removed in 3.18 before this was fixed, so there is no
workaround to backport, but it's easy enough to avoid the problem
by changing the printk message to something similar that uses
proper accessors for the skb fields.
Fixes: 78de2c063710 ("staging: r8192ee: Add source files for core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 2d76e9633b572ae5a64150b638eed77f4afc12db upstream.
HOSTCC arch/mips/boot/elf2ecoff
arch/mips/boot/elf2ecoff.c: In function ‘main’:
arch/mips/boot/elf2ecoff.c:271:8: warning: variable ‘shstrtab’ set but not used [-Wunused-but-set-variable]
char *shstrtab;
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 1bc2d3e38e5bf90af4e9d64e1696f2d39757355a upstream.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7216/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 5b235dc2647e4977b17b5c41d959d0f455831c3f upstream.
Somehow the wrong version of the patch to remove the use of custom
gpio.h on mips has been merged. This patch add the missing fixes for a
build error on jz4740 because linux/gpio.h doesn't provide any machine
specfics definitions anymore.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11089/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit c4a305374bbf36414515d2ae00d588c67051e67d upstream.
Caller (generic PCI code) already do proper locking so no need to add
another one here.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7601/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 23ca9b522383d3b9b7991d8586db30118992af4a upstream.
kernelci reports a failure of the ip28_defconfig build after upgrading its
gcc version:
arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop.
The problem apparently is that the -mr10k-cache-barrier=store option is now
rejected for CPUs other than r10k. Explicitly including the CPU in the
check fixes this and is safe because both options were introduced in
gcc-4.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 68fe55680d0f3342969f49412fceabb90bdfadba upstream.
Fix a commit 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in
delay slots") regression and remove assembly errors:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat"
triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU
instruction. This is because with that option in place the instruction
becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU)
sequence that uses $at as a temporary register.
With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though,
and this is already enforced in arch/mips/Makefile, so choose the 32-bit
expansion variant for the supported configurations and then replace the
64-bit variant with #error just in case.
Fixes: 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in delay slots")
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16893/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 3021773c7c3e75e20b693931a19362681e744ea9 upstream.
When expanding the la or dla pseudo-instruction in a delay slot the GNU
assembler will complain should the pseudo-instruction expand to multiple
actual instructions, since only the first of them will be in the delay
slot leading to the pseudo-instruction being only partially executed if
the branch is taken. Use of PTR_LA in the dec int-handler.S leads to
such warnings:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot
arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot
Avoid this by open coding the PTR_LA macros.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 4ec8f9e9b08451303253249e4e302f10ee23d565 upstream.
Commit 078a55fc824c1 ("Delete __cpuinit/__CPUINIT usage from MIPS code")
removed our __CPUINIT directives, so now the ".previous" directives
are superfluous. Remove them.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8156/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 20e783e39e55c2615fb61d1b3d139ee9edcf6772 upstream.
The aurora cache controller is the only remaining user of a couple
of functions in this file and are completely unused when that is
disabled, leading to build warnings:
arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function]
arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function]
arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function]
With the knowledge that the code is now aurora-specific, we can
simplify it noticeably:
- The pl310 errata workarounds are not needed on aurora and can be removed
- As confirmed by Thomas Petazzoni from the data sheet, the cache_wait()
macro is never needed.
- No need to hold the lock across atomic cache sync
- We can load the l2x0_base into a local variable across operations
There should be no functional change in this patch, but readability
and the generated object code improves, along with avoiding the
warnings.
(on Armada 370 RD and Armada XP GP, boot tested, plus a little bit of
DMA traffic by reading data from a SD card)
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit e16343c47e4276f5ebc77ca16feb5e50ca1918f9 upstream.
The warning was introduced in 2009 (commit 4bf1fa5a34aa ([ARM] 5613/1:
implement CALLER_ADDRESSx)). The only "problem" here is that
CALLER_ADDRESSx for x > 1 returns NULL which doesn't do much harm.
The drawback of implementing a fix (i.e. use unwind tables to implement CALLER_ADDRESSx) is that much of the unwinder code would need to be marked as not
traceable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 52aaac5ae52ad9a7016410ffeedbaf24b722f3a2 upstream.
Commit 21278aeafbfa ("ARM: use menuconfig for sub-arch menus") improved
the sub-arch menus, but accidentally caused new warnings for omap1.
This was because the commit added a menu entry around config ARCH_OMAP
bool entry where the menu had depends on ARCH_MULTI_V6 || ARCH_MULTI_V7.
As ARCH_OMAP is shared between omap1 and omap2plus, let's fix the
issue by defining ARCH_OMAP in the shared plat-omap/Kconfig.
Fixes: 21278aeafbfa ("ARM: use menuconfig for sub-arch menus")
Reported-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 5008efc83bf85b647aa1cbc44718b1675bbb7444 upstream.
The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2
mode, due to the way it performs arithmetic on the program counter, so it
is built in ARM mode instead. However, building C files in ARM mode under
CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed
by subsystems like ftrace does not expect having to deal with interworking
branches.
Since the sequence in question is simply a poor man's ISB instruction,
let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2
implies V7, so 'isb' should always be supported in that case.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 13d1b9575ac2c2da143cd2236b6cf0fc314570f8 upstream.
Two files that get included when building the multi_v7_defconfig target
fail to build when selecting THUMB2_KERNEL for this configuration.
In both cases, we can just build the file as ARM code, as none of its
symbols are exported to modules, so there are no interworking concerns.
In the iwmmxt.S case, add ENDPROC() declarations so the symbols are
annotated as functions, resulting in the linker to emit the appropriate
mode switches.
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
This shuts up a warning in the 3.18-stable series that has been fixed
in newer kernels with commit 498a92d42596 ("ARM: cns3xxx: pci: avoid
potential stack overflow"):
arch/arm/mach-cns3xxx/pcie.c: In function 'cns3xxx_pcie_hw_init':
arch/arm/mach-cns3xxx/pcie.c:313:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
The fix that went into v4.4 is known to be buggy and was later
fixed again with commit 88e9da9a2a70 ("CNS3xxx: Fix PCI
cns3xxx_write_config()"). While we could backport both to 3.18,
they are fairly invasive and the warning is definitely harmless
here as the call chain is known to not overflow the stack of the
init task.
This simply adds a Makefile flag to extend the limit for this one
file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 927392d73a97d8d235bb65400e2e3c7f0bec2b6f upstream.
Linus reported the following new warning on x86 allmodconfig with GCC 5.1:
> ./arch/x86/include/asm/spinlock.h: In function ‘arch_spin_lock’:
> ./arch/x86/include/asm/spinlock.h:119:3: warning: implicit declaration
> of function ‘__ticket_lock_spinning’ [-Wimplicit-function-declaration]
> __ticket_lock_spinning(lock, inc.tail);
> ^
This warning triggers because of these hacks in misc.h:
/*
* we have to be careful, because no indirections are allowed here, and
* paravirt_ops is a kind of one. As it will only run in baremetal anyway,
* we just keep it from happening
*/
#undef CONFIG_PARAVIRT
#undef CONFIG_KASAN
But these hacks were not updated when CONFIG_PARAVIRT_SPINLOCKS was added,
and eventually (with the introduction of queued paravirt spinlocks in
recent kernels) this created an invalid Kconfig combination and broke
the build.
So add a CONFIG_PARAVIRT_SPINLOCKS #undef line as well.
Also remove the _ASM_X86_DESC_H quirk: that undocumented quirk
was originally added ages ago, in:
099e1377269a ("x86: use ELF format in compressed images.")
and I went back to that kernel (and fixed up the main Makefile
which didn't build anymore) and checked what failure it
avoided: it avoided an include file dependencies related
build failure related to our old x86-platforms code.
That old code is long gone, the header dependencies got cleaned
up, and the build does not fail anymore with the totality of
asm/desc.h included - so remove the quirk.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 1cf38741308c64d08553602b3374fb39224eeb5a upstream.
xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit ea6e9dea2e72a7abd146a2c5bab726b27f34b36c upstream.
This comit fixes the following sparse warnign:
drivers/staging/dgnc/dgnc_tty.c:572:1:
warning: the frame size of 1060 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This was caused by having buffer as an automatic variable. This commit
moves it from the stack to the heap.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 41cb65c4854e14f12b1cbb8215e509d8ad4d0c88 upstream.
Fix the following sparse warning :
In file included from drivers/staging/wlan-ng/prism2usb.c:5:0:
drivers/staging/wlan-ng/prism2fw.c: In function
‘read_cardpda.constprop.43’:
drivers/staging/wlan-ng/prism2fw.c:792:1: warning: the frame size of
1068 bytes is larger than 1024 bytes [-Wframe-larger-than=]
The variable to 'struct p80211msg_p2req_readpda' was previously being created
on the stack, which inturn exeeded the frame size limit, resulting in a
sparse warning. This patch alloctes the memory to the structure dynamically
and the operations are left unchanged.
Signed-off-by: A Raghavendra Rao <arrao@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 8c182ae20791d638c07ff499709c4a1d4697bd7c upstream.
For loop is outside of the else branch of the above conditional statement.
Fixing misleading indentation.
Fix a smatch warning:
drivers/staging/rtl8723au/core/rtw_wlan_util.c:528
WMMOnAssocRsp23a() warn: curly braces intended?
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 53bd4a004ee5ff0f71a858de78faac98924b4a87 upstream.
>From the indenting, it looks like curly braces were intended here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit b6acb0cfc21293a1bfc283e9217f58f7474ef728 upstream.
Fix indent warning when building with gcc 6:
drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented
as if it were guarded by... [-Wmisleading-indentation]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
We get a warning for the large stack usage in some configurations:
drivers/staging/vt6655/device_main.c: In function 'device_ioctl':
drivers/staging/vt6655/device_main.c:2974:1: warning: the frame size of 1304 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is addressed in linux-3.19 with commit 67013f2c0e58 ("staging: vt6655:
mac80211 conversion add main mac80211 functions"), which obsoletes the
device_ioctl() function, but as that does not apply to stable kernels,
this picks an easier way out by using dynamic allocation.
The driver was merged in 2.6.31, and the fix applies to all versions
before 3.19.
Fixes: 5449c685a4b3 ("Staging: Add pristine upstream vt6655 driver sources")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
gcc-6 produces a harmless warning:
drivers/staging/imx-drm/imx-hdmi.c: In function 'hdmi_config_AVI':
drivers/staging/imx-drm/imx-hdmi.c:967:2: error: this 'else' clause does not guard... [-Werror=misleading-indentation]
Commit d083c312cba2 ("drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little")
in linux-4.3 fixes this with a larger rewrite that is not applicable here.
After that rewrite, the variable that gets assigned here no longer exists.
The assignment is rather pointless here, as we just set a variable to zero
that is later added into another variable using a bitwise or operator, and
that has no effect, so I'm just changing the indentation here to shut up
the warning.
The driver was originally merged in linux-3.13, and the fix applies
to all versions between that and 4.2.
Fixes: 9aaf880ed4ee ("imx-drm: Add mx6 hdmi transmitter support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
The driver uses a 32-bit variable to store a pointer, causing a couple of
warnings:
../drivers/staging/bcm/CmHost.c: In function 'StoreCmControlResponseMessage':
../drivers/staging/bcm/CmHost.c:1503:3: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bcm_connect_mgr_params *) ntohl(
^
../drivers/staging/bcm/CmHost.c:1546:3: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bcm_connect_mgr_params *) ntohl(
^
../drivers/staging/bcm/CmHost.c:1564:3: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bcm_connect_mgr_params *) ntohl(
I fixed other warnings in an earlier commit 9f1c75ac2dba ("staging/bcm: fix most
build warnings"), but couldn't figure out what was the intended behavior on
64-bit machines here.
The driver was removed in linux-3.19, commit d09e9b160fc1 ("staging: bcm: remove
driver") which explains that it never worked on 64-bit machines. This adds
a Kconfig dependency instead to prevent it from being built in the known
broken configuration. This workaround applies to v2.6.37 or higher.
Fixes: f8942e07a3db ("staging: Beeceem USB Wimax driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 9c8ee3c7341393811d5be5eb61b815e76f92c799 upstream.
Commit 7edaa761ee81b ("video: mx3fb: Add backlight control support")
changed the mx3fb driver so it always selects the BACKLIGHT_CLASS_DEVICE
symbol, but that is hidden behind BACKLIGHT_LCD_SUPPORT in Kconfig, so
we get a Kconfig warning for multi_v5_defconfig, which doesn't have that:
Warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 &&
DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY
&& FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI &&
EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE
which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)
This makes sure we always enable both symbols together for mx3fb, like
we do for the other drivers that can't be built without backlight
support. Note that a better solution would be to ensure the driver can
work with or without backlight support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit ba0635ffb7665d76715b43ae8144e014a90c1e63 upstream.
Static checkers complain that we should probably add curly braces
because, from the indenting, it looks like seq_printf() should be inside
the list_for_each_entry() loop. But the code is actually correct, it's
just the indenting which is off.
Besides fixing the indenting on seq_printf(), I did add curly braces,
because generally mult-line indents should have curly braces to make
them more readable.
The unintended indent was left behind and not unindented in
commit d7f46fc4e7323887494db13f063a8e59861fefb0
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Fri Dec 6 14:10:55 2013 -0800
drm/i915: Make pin count per VMA
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 129d23a56623eea0947a05288158d76dc7f2f0ac upstream.
This fixes:
====================
net/netfilter/nft_reject.c: In function ‘nft_reject_dump’:
net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswitch]
switch (priv->type) {
^
net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_ICMPX_UNREACH’ not handled in switch [-Wswi\
tch]
net/netfilter/nft_reject_inet.c: In function ‘nft_reject_inet_dump’:
net/netfilter/nft_reject_inet.c:105:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswi\
tch]
switch (priv->type) {
^
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit c1f866767777d1c6abae0ec57effffcb72017c00 upstream.
More recent GCC warns about two kinds of switch statement uses:
1) Switching on an enumeration, but not having an explicit case
statement for all members of the enumeration. To show the
compiler this is intentional, we simply add a default case
with nothing more than a break statement.
2) Switching on a boolean value. I think this warning is dumb
but nevertheless you get it wholesale with -Wswitch.
This patch cures all such warnings in netfilter.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 22f44150aad7a1d6b074ab6cf59abee61c7187c6 upstream.
gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac
driver:
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process':
drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
This is a false positive, and marking the brcmf_fws_hanger_poppkt function
as 'static inline' makes the warning go away. I have checked the object
file output and while a little code gets moved around, the size of
the binary remains identical.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 2cce76c3fab410520610a7d2f52faebc3cfcf843 upstream.
gcc-6 warns about code in il3945_hw_txq_ctx_free() being
somewhat ambiguous:
drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
This adds a set of curly braces to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 48dc5fb3ba53b20418de8514700f63d88c5de3a3 upstream.
The driver reads a value from hfa384x_from_bap(), which may fail,
and then assigns the value to a local variable. gcc detects that
in in the failure case, the 'rlen' variable now contains
uninitialized data:
In file included from ../drivers/net/wireless/intersil/hostap/hostap_pci.c:220:0:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function 'hfa384x_get_rid':
drivers/net/wireless/intersil/hostap/hostap_hw.c:842:5: warning: 'rec' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (le16_to_cpu(rec.len) == 0) {
This restructures the function as suggested by Russell King, to
make it more readable and get more reliable error handling, by
handling each failure mode using a goto.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
uli526x_timer
commit e1395a321eab1a7833d82e952eb8255e0a1f03cb upstream.
This code in drivers/net/ethernet/dec/tulip/uli526x.c
function "uli526x_timer":
1086 } else
1087 if ((tmp_cr12 & 0x3) && db->link_failed) {
[...snip...]
1109 }
1110 else if(!(tmp_cr12 & 0x3) && db->link_failed)
1111 {
[...snip...]
1117 }
1118 db->init=0;
is misleadingly indented: the
db->init=0
is indented as if part of the else clause at line 1086, but it is
independent of it (no braces before the "if" at line 1087).
This patch fixes the indentation to reflect the actual meaning of the code,
though is it actually meant to be part of the "else" clause? (I'm a
compiler developer, not a kernel person). It also adds spaces around
the assignment, to placate checkpatch.pl.
Seen via an experimental new gcc warning I'm working on for gcc 6,
-Wmisleading-indentation, using gcc r223098 adding
-Werror=misleading-indentation to KBUILD_CFLAGS in Makefile.
The experimental GCC emits this warning (as an error), rightly IMHO:
drivers/net/ethernet/dec/tulip/uli526x.c: In function ‘uli526x_timer’:
drivers/net/ethernet/dec/tulip/uli526x.c:1118:3: error: statement is
indented as if it were guarded by... [-Werror=misleading-indentation]
db->init=0;
^
drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: note: ...this ‘else’
clause, but it is not
} else
^
Hope this is helpful
Dave
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 57e7c8cef224af166b8ec932b5e383641418c005 upstream.
When CONFIG_PCI_MSI is disabled, we get warnings about unused functions
in the vxge driver:
drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]
We could add another #ifdef here, but it's nicer to avoid those warnings
for good by converting the existing #ifdef to if(IS_ENABLED()), which has
the same effect but provides better compile-time coverage in general,
and lets the compiler understand better when the function is intentionally
unused.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit de92718883ddbcd11b738d36ffcf57617b97fa12 upstream.
The tulip driver causes annoying build-time warnings for allmodconfig
builds for all recent architectures:
dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined
dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined!
This is the last remaining warning for arm64, and I'd like to get rid of
it. We don't really know the cache line size, architecturally it would
be at least 16 bytes, but all implementations I found have 64 or 128
bytes. Configuring tulip for 32-byte lines as we do on ARM32 seems to
be the safe but slow default, and nobody who cares about performance these
days would use a tulip chip anyway, so we can just use that.
To save the next person the job of trying to find out what this is for
and picking a default for their architecture just to kill off the warning,
I'm now removing the preprocessor #warning and turning it into a pr_warn
or dev_warn that prints the equivalent information when the driver gets
loaded.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 5f5316fcd08ef74b282adf6774956431fac62663 upstream.
Resolves compile warning about use of a deprecated function call:
drivers/net/ethernet/amd/nmclan_cs.c: In function ‘nmclan_config’:
drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: ‘pcmcia_request_exclusive_irq’ is deprecated (declared at include/pcmcia/ds.h:213) [-Wdeprecated-declarations]
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
Updates pcmcia_request_exclusive_irq() to pcmcia_request_irq().
CC: Roger Pao <rpao@paonet.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 96a30175f927facfb421655ef08b7a0fe546fbed upstream.
A recent patch tried to work around a valid warning for the use of a
deprecated interface by blindly changing from the old
pcmcia_request_exclusive_irq() interface to pcmcia_request_irq().
This driver has an interrupt handler that is not currently aware
of shared interrupts, but can be easily converted to be.
At the moment, the driver reads the interrupt status register
repeatedly until it contains only zeroes in the interesting bits,
and handles each bit individually.
This patch adds the missing part of returning IRQ_NONE in case none
of the bits are set to start with, so we can move on to the next
interrupt source.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5f5316fcd08ef7 ("am2150: Update nmclan_cs.c to use update PCMCIA API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit 8e0cc8c326d99e41468c96fea9785ab78883a281 upstream.
gcc points out code that is not indented the way it is
interpreted:
net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen':
net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
return cfpkt_getlen(pkt);
^~~~~~
net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not
else
^~~~
It is clear from the context that not returning here would be
a bug, as we'd end up passing a negative length into a function
that takes a u16 length, so it is not missing curly braces
here, and I'm assuming that the indentation is the only part
that's wrong about it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
|
commit d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 upstream.
The #warning was present 10 years ago when the driver first got merged.
As the platform is rather obsolete by now, it seems very unlikely that
the warning will cause anyone to fix the code properly.
kernelci.org reports the warning for every build in the meantime, so
I think it's better to just turn it into a code comment to reduce
noise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
|
