summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-12-30V4L/DVB (10079): sh_mobile_ceu: use new pixel format translation codeMagnus Damm1-26/+57
This patch converts the sh_mobile_ceu driver to make use of the new pixel format translation code. Only pass-though mode at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10078): video: add NV16 and NV61 pixel formatsMagnus Damm1-0/+2
This patch adds support for NV16 and NV61 pixel formats. These pixel formats use two planes; one for 8-bit Y values and one for interleaved 8-bit U and V values. NV16/NV61 formats are very similar to NV12/NV21 with the exception that NV16/NV61 are using the same number of lines for both planes. The difference between NV16 and NV61 is the U and V byte order. The fourcc values are extrapolated from the NV12/NV21 case. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10077): mt9m111: add support for mt9m112 since sensors seem identicalMike Rapoport2-14/+18
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10076): v4l: add chip ID for MT9M112 camera sensor from MicronMike Rapoport1-0/+1
The chip is largely compatible with MT9M111 and is going to be supported by the same driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10075): pxa-camera: setup the FIFO inactivity time-out registerGuennadi Liakhovetski1-21/+69
Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns. The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than one pixel time. For this we have to know the pixel clock frequency, which usually is provided by the camera. We use the struct soc_camera_sense to request PCLK frequency from the camera driver upon each data format change. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10074): soc-camera: add camera sense dataGuennadi Liakhovetski1-0/+27
Add a struct soc_camera_sense, that can be used by camera host drivers to request additional information from a camera driver, for example, when changing data format. This struct can be extended in the future, its first use is to request the camera driver whether the pixel-clock frequency has changed. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10073): mt9m111: Add automatic white balance controlRobert Jarzmik1-1/+27
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10072): soc-camera: Add signal inversion flags to be used by camera ↵Guennadi Liakhovetski6-14/+65
drivers As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a mt9m111 camera require opposite pixel clock polarity, which means one of them inverts it. This patch adds support for inversion flags and switches all available camera drivers to using them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB: pxa-camera: use memory mapped IO access for camera (QCI) registersEric Miao1-40/+162
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10107): More than one driver defines the same var name ↵Mauro Carvalho Chehab1-3/+3
(dump_bridge). Add "static" on stv06xx for all static functions and parameters to avoid such troubles. Cc: Erik Andren <erik.andren@gmail.com> Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10106): gscpa - stv06xx: Fix compilation with kernel treeMauro Carvalho Chehab1-0/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10069): Add ov7725 support to ov772x driverKuninori Morimoto2-0/+23
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10068): Change device ID selection method on ov772x driverKuninori Morimoto2-7/+22
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10067): Remove ov772x_default_regs from ov772x driverKuninori Morimoto1-18/+3
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10066): mt9m001 mt9v022: fix bus-width switch GPIO availability testGuennadi Liakhovetski2-4/+6
Testing for non-NULL platform-data is not enough, we have to check if the GPIO in the platform data is valid or not. Also see my earlier patch: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10065): mt9m111: add all yuv format combinations.Robert Jarzmik1-1/+23
The Micron mt9m111 offers 4 byte orders for YCbCr output. This patchs adds all possible outputs capabilities to the mt9m111 driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10064): mt9m111: mt9m111_get_global_gain() - unsigned >= 0 is ↵roel kluin1-8/+5
always true unsigned >= 0 is always true and fix formula Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10062): dsbr100: change return values in 3 functionsAlexey Klimov1-10/+10
Patch replace return -1; with return retval; in 3 functions. And we also change if-checks for this returned values. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10061): dsbr100: increase driver versionAlexey Klimov1-2/+6
Due to a lot of patches for dsbr100 last time we should update version of driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10060): dsbr100: fix and add right commentsAlexey Klimov1-11/+10
Fix and add right comments. Few empty lines removed. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10059): dsbr100: dev_err instead of dev_warnAlexey Klimov1-1/+1
We should use dev_err (not dev_warn) if video_register_device fails. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10058): dsbr100: fix codingstyle, add dev_err messagesAlexey Klimov1-47/+137
We should make if-constructions more clear. Introduce int retval variables in some functions to make it this way. Also a lot of useful dev_err messages added. And now we check every returned value after usb_control_msg. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10057): dsbr100: place dev_warn instead of printkAlexey Klimov1-1/+2
Remove printk in one line and place dev_warn there. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10056): em28xx: Add snapshot button on Pixelview Prolink PlayTV USB 2.0Douglas Schilling Landgraf1-0/+1
Added snapshot feature for Pixelview Prolink PlayTV USB 2.0 Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10055): em28xx: Add entry for PixelView PlayTV Box 4Douglas Schilling Landgraf3-0/+24
Added board PixelView PlayTV Box 4 Thanks to Vildenei Negrao Pereira <neodarkaman@brturbo.com.br> for testing and data collection. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10054): dsbr100: fix unplug oopsAlexey Klimov1-29/+77
This patch corrects unplug procedure. Patch adds usb_dsbr100_video_device_release, new macros - videodev_to_radio, mutex lock and a lot of safety checks. Struct video_device videodev is embedded in dsbr100_device structure. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10053): radio-mr800: disable autosuspend supportAlexey Klimov1-1/+1
Because this device doesn't provide any powermanagment capabilities(may be they exist but unknown to me yet, so they are not implemented), we should turn them off. Patch sets support_autosuspend equal to 0. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10052): radio-mr800: correct unplug, fix to previous patchAlexey Klimov1-19/+19
This patch corrects unplug procedure, that was implemented wrong in previous patch. New function usb_amradio_device_release added. Disconnect lock removed. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10050): gspca - vc032x: Webcam 046d:0897 added.Jean-Francois Moine2-0/+2
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10049): gspca - many subdrivers: Set 'const' the pixel format table.Jean-Francois Moine23-33/+33
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10048): gspca - stv06xx: New subdriver.Erik Andren14-1/+2808
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10046): gspca - ov534: Use the gspca usb buf for usb control messages.Jean-Francois Moine1-51/+53
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10045): gspca - ov534: Remove empty line in trace.Jean-Francois Moine1-1/+1
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10044): gspca - pac7311: Webcam 093a:2620 added.Hans de Goede2-0/+2
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10041): m5602 - rework parts of the resolution initializationErik Andrén2-35/+32
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10040): m5602 - ov9650: Activate variopixelErik Andrén1-0/+7
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10039): m5602 - ov9650: Add CIF modeErik Andrén2-1/+51
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10038): m5602: tweak the hsync. Remove redundant init sequenceErik Andrén1-9/+4
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10037): m5602: add QVGA mode for the ov9650 sensorErik Andrén2-3/+51
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10036): m5602 - ov9650: Prepare the sensor to set multiple resolutionsErik Andrén2-26/+57
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10035): m5602: add a start sending hook in the sensor structErik Andrén2-0/+6
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10034): m5602: fixup offset in order to align imageErik Andrén1-3/+3
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10033): m5602: add some commentsErik Andrén2-9/+10
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10032): m5602: add vflip quirk for Alienware m9700Erik Andrén1-0/+7
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10031): m5602: correct the name of the Pascal Stangs libraryErik Andrén1-1/+1
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10030): m5602: Use read/modify/write when toggling vflip on the po1030Erik Andrén1-4/+12
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10029): m5602: remove uneeded test on po1030Erik Andrén1-6/+0
The po1030 never sends long i2c messages, no need to test for that in the init phase. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10028): mt5602: Remove the s5k83a specific read_sensor functionErik Andrén2-40/+0
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10027): m5602: convert the s5k83a sensor to use the common functionErik Andrén1-13/+13
Convert the s5k83a sensor to use the common read_sensor function Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10026): m5602: remove the s5k4aa implementation of the read_sensorErik Andrén2-43/+0
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-16 01:41:04 +0300