summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-04-05nfsd4: reject "negative" acl lengthsJ. Bruce Fields1-1/+1
commit 64a817cfbded8674f345d1117b117f942a351a69 upstream. Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here. The symptom seen was a warning when we attempt to a kmalloc with an excessive size. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05loop: prevent bdev freeing while device in useAnatol Pomozov2-1/+9
commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream. struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05KVM: x86: invalid opcode oops on SET_SREGS with OSXSAVE bit set (CVE-2012-4461)Petr Matousek1-0/+6
commit 6d1068b3a98519247d8ba4ec85cd40ac136dbdf9 upstream. On hosts without the XSAVE support unprivileged local user can trigger oops similar to the one below by setting X86_CR4_OSXSAVE bit in guest cr4 register using KVM_SET_SREGS ioctl and later issuing KVM_RUN ioctl. invalid opcode: 0000 [#2] SMP Modules linked in: tun ip6table_filter ip6_tables ebtable_nat ebtables ... Pid: 24935, comm: zoog_kvm_monito Tainted: G D 3.2.0-3-686-pae EIP: 0060:[<f8b9550c>] EFLAGS: 00210246 CPU: 0 EIP is at kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] EAX: 00000001 EBX: 000f387e ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: ef5a0060 ESP: d7c63e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process zoog_kvm_monito (pid: 24935, ti=d7c62000 task=ed84a0c0 task.ti=d7c62000) Stack: 00000001 f70a1200 f8b940a9 ef5a0060 00000000 00200202 f8769009 00000000 ef5a0060 000f387e eda5c020 8722f9c8 00015bae 00000000 ed84a0c0 ed84a0c0 c12bf02d 0000ae80 ef7f8740 fffffffb f359b740 ef5a0060 f8b85dc1 0000ae80 Call Trace: [<f8b940a9>] ? kvm_arch_vcpu_ioctl_set_sregs+0x2fe/0x308 [kvm] ... [<c12bfb44>] ? syscall_call+0x7/0xb Code: 89 e8 e8 14 ee ff ff ba 00 00 04 00 89 e8 e8 98 48 ff ff 85 c0 74 1e 83 7d 48 00 75 18 8b 85 08 07 00 00 31 c9 8b 95 0c 07 00 00 <0f> 01 d1 c7 45 48 01 00 00 00 c7 45 1c 01 00 00 00 0f ae f0 89 EIP: [<f8b9550c>] kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] SS:ESP 0068:d7c63e70 QEMU first retrieves the supported features via KVM_GET_SUPPORTED_CPUID and then sets them later. So guest's X86_FEATURE_XSAVE should be masked out on hosts without X86_FEATURE_XSAVE, making kvm_set_cr4 with X86_CR4_OSXSAVE fail. Userspaces that allow specifying guest cpuid with X86_FEATURE_XSAVE even on hosts that do not support it, might be susceptible to this attack from inside the guest as well. Allow setting X86_CR4_OSXSAVE bit only if host has XSAVE support. Signed-off-by: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05mm/hotplug: correctly add new zone to all other nodes' zone listsJiang Liu1-7/+8
commit 08dff7b7d629807dbb1f398c68dd9cd58dd657a1 upstream. When online_pages() is called to add new memory to an empty zone, it rebuilds all zone lists by calling build_all_zonelists(). But there's a bug which prevents the new zone to be added to other nodes' zone lists. online_pages() { build_all_zonelists() ..... node_set_state(zone_to_nid(zone), N_HIGH_MEMORY) } Here the node of the zone is put into N_HIGH_MEMORY state after calling build_all_zonelists(), but build_all_zonelists() only adds zones from nodes in N_HIGH_MEMORY state to the fallback zone lists. build_all_zonelists() ->__build_all_zonelists() ->build_zonelists() ->find_next_best_node() ->for_each_node_state(n, N_HIGH_MEMORY) So memory in the new zone will never be used by other nodes, and it may cause strange behavor when system is under memory pressure. So put node into N_HIGH_MEMORY state before calling build_all_zonelists(). Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: Jiang Liu <liuj97@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05KVM: Fix buffer overflow in kvm_set_irq()Avi Kivity1-0/+1
commit f2ebd422f71cda9c791f76f85d2ca102ae34a1ed upstream. kvm_set_irq() has an internal buffer of three irq routing entries, allowing connecting a GSI to three IRQ chips or on MSI. However setup_routing_entry() does not properly enforce this, allowing three irqchip routes followed by an MSI route to overflow the buffer. Fix by ensuring that an MSI entry is added to an empty list. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05macvtap: zerocopy: validate vectors before building skbJason Wang1-0/+4
commit b92946e2919134ebe2a4083e4302236295ea2a73 upstream. There're several reasons that the vectors need to be validated: - Return error when caller provides vectors whose num is greater than UIO_MAXIOV. - Linearize part of skb when userspace provides vectors grater than MAX_SKB_FRAGS. - Return error when userspace provides vectors whose total length may exceed - MAX_SKB_FRAGS * PAGE_SIZE. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.de> [patch reduced to the 3rd reason only for 3.0] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05KVM: Ensure all vcpus are consistent with in-kernel irqchip settingsAvi Kivity4-0/+24
commit 3e515705a1f46beb1c942bb8043c16f8ac7b1e9e upstream. If some vcpus are created before KVM_CREATE_IRQCHIP, then irqchip_in_kernel() and vcpu->arch.apic will be inconsistent, leading to potential NULL pointer dereferences. Fix by: - ensuring that no vcpus are installed when KVM_CREATE_IRQCHIP is called - ensuring that a vcpu has an apic if it is installed after KVM_CREATE_IRQCHIP This is somewhat long winded because vcpu->arch.apic is created without kvm->lock held. Based on earlier patch by Michael Ellerman. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05NFS: nfs_getaclargs.acl_len is a size_tChuck Lever1-1/+2
commit 56d08fef2369d5ca9ad2e1fc697f5379fd8af751 upstream. Squelch compiler warnings: fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’: fs/nfs/nfs4proc.c:3811:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/nfs4proc.c:3818:15: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Introduced by commit bf118a34 "NFSv4: include bitmap in nfsv4 get acl data", Dec 7, 2011. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05NFSv4: Fix an Oops in the NFSv4 getacl codeTrond Myklebust3-6/+9
commit 331818f1c468a24e581aedcbe52af799366a9dfe upstream. Commit bf118a342f10dafe44b14451a1392c3254629a1f (NFSv4: include bitmap in nfsv4 get acl data) introduces the 'acl_scratch' page for the case where we may need to decode multi-page data. However it fails to take into account the fact that the variable may be NULL (for the case where we're not doing multi-page decode), and it also attaches it to the encoding xdr_stream rather than the decoding one. The immediate result is an Oops in nfs4_xdr_enc_getacl due to the call to page_address() with a NULL page pointer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05NFSv4: include bitmap in nfsv4 get acl dataAndy Adamson5-48/+89
commit bf118a342f10dafe44b14451a1392c3254629a1f upstream. The NFSv4 bitmap size is unbounded: a server can return an arbitrary sized bitmap in an FATTR4_WORD0_ACL request. Replace using the nfs4_fattr_bitmap_maxsz as a guess to the maximum bitmask returned by a server with the inclusion of the bitmap (xdr length plus bitmasks) and the acl data xdr length to the (cached) acl page data. This is a general solution to commit e5012d1f "NFSv4.1: update nfs4_fattr_bitmap_maxsz" and fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs. Fix a bug in decode_getacl that returned -EINVAL on ACLs > page when getxattr was called with a NULL buffer, preventing ACL > PAGE_SIZE from being retrieved. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05KVM: x86: Prevent starting PIT timers in the absence of irqchip supportJan Kiszka1-3/+7
commit 0924ab2cfa98b1ece26c033d696651fd62896c69 upstream. User space may create the PIT and forgets about setting up the irqchips. In that case, firing PIT IRQs will crash the host: BUG: unable to handle kernel NULL pointer dereference at 0000000000000128 IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm] ... Call Trace: [<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm] [<ffffffff81071431>] process_one_work+0x111/0x4d0 [<ffffffff81071bb2>] worker_thread+0x152/0x340 [<ffffffff81075c8e>] kthread+0x7e/0x90 [<ffffffff815a4474>] kernel_thread_helper+0x4/0x10 Prevent this by checking the irqchip mode before starting a timer. We can't deny creating the PIT if the irqchips aren't set up yet as current user land expects this order to work. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05batman-adv: Only write requested number of byte to user bufferSven Eckelmann1-3/+2
commit b5a1eeef04cc7859f34dec9b72ea1b28e4aba07c upstream. Don't write more than the requested number of bytes of an batman-adv icmp packet to the userspace buffer. Otherwise unrelated userspace memory might get overridden by the kernel. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05batman-adv: bat_socket_read missing checksPaul Kot1-2/+2
commit c00b6856fc642b234895cfabd15b289e76726430 upstream. Writing a icmp_packet_rr and then reading icmp_packet can lead to kernel memory corruption, if __user *buf is just below TASK_SIZE. Signed-off-by: Paul Kot <pawlkt@gmail.com> [sven@narfation.org: made it checkpatch clean] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05x25: Handle undersized/fragmented skbsMatthew Daley6-17/+87
commit cb101ed2c3c7c0224d16953fe77bfb9d6c2cb9df upstream. There are multiple locations in the X.25 packet layer where a skb is assumed to be of at least a certain size and that all its data is currently available at skb->data. These assumptions are not checked, hence buffer overreads may occur. Use pskb_may_pull to check these minimal size assumptions and ensure that data is available at skb->data when necessary, as well as use skb_copy_bits where needed. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05x25: Validate incoming call user data lengthsMatthew Daley2-0/+9
commit c7fd0d48bde943e228e9c28ce971a22d6a1744c4 upstream. X.25 call user data is being copied in its entirety from incoming messages without consideration to the size of the destination buffers, leading to possible buffer overflows. Validate incoming call user data lengths before these copies are performed. It appears this issue was noticed some time ago, however nothing seemed to come of it: see http://www.spinics.net/lists/linux-x25/msg00043.html and commit 8db09f26f912f7c90c764806e804b558da520d4f. Signed-off-by: Matthew Daley <mattjd@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05KVM: Clean up error handling during VCPU creationJan Kiszka2-10/+6
commit d780592b99d7d8a5ff905f6bacca519d4a342c76 upstream. So far kvm_arch_vcpu_setup is responsible for freeing the vcpu struct if it fails. Move this confusing resonsibility back into the hands of kvm_vm_ioctl_create_vcpu. Only kvm_arch_vcpu_setup of x86 is affected, all other archs cannot fail. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Btrfs: limit the global reserve to 512mbJosef Bacik1-1/+1
commit fdf30d1c1b386e1b73116cc7e0fb14e962b763b0 upstream. A user reported a problem where he was getting early ENOSPC with hundreds of gigs of free data space and 6 gigs of free metadata space. This is because the global block reserve was taking up the entire free metadata space. This is ridiculous, we have infrastructure in place to throttle if we start using too much of the global reserve, so instead of letting it get this huge just limit it to 512mb so that users can still get work done. This allowed the user to complete his rsync without issues. Thanks Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: xhci: Fix TRB transfer length macro used for Event TRB.Vivek Gautam2-12/+16
commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream. Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs. This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci: Bulk transfer support". This patch will have issues applying to older kernels. Signed-off-by: Vivek gautam <gautam.vivek@samsung.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05net/irda: add missing error path release_sock callKees Cook1-2/+4
commit 896ee0eee6261e30c3623be931c3f621428947df upstream. This makes sure that release_sock is called for all error conditions in irda_getsockopt. Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05mwifiex: cancel cmd timer and free curr_cmd in shutdown processBing Zhao1-0/+8
commit 084c7189acb3f969c855536166042e27f5dd703f upstream. curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05vt: synchronize_rcu() under spinlock is not nice...Al Viro1-2/+4
commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream. vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BDKonstantin Holoborodko2-0/+8
commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream. It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them. https://search.meau.com/?q=FX-USB-AW Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com> Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05xen-blkback: fix dispatch_rw_block_io() error pathJan Beulich1-6/+1
commit 0e5e098ac22dae38f957e951b70d3cf73beff0f7 upstream. Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions). Also remove a misleading and a stale (after said commit) comment. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05b43: A fix for DMA transmission sequence errorsIestyn C. Elfick1-12/+53
commit b251412db99ccd4495ce372fec7daee27bf06923 upstream. Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine <chris@cvine.freeserve.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05sysfs: handle failure path correctly for readdir()Ming Lei1-0/+4
commit e5110f411d2ee35bf8d202ccca2e89c633060dca upstream. In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(), the failure from filldir() isn't handled, and the reference counter of the sysfs_dirent object pointed by filp->private_data will be released without clearing filp->private_data, so use after free bug will be triggered later. This patch returns immeadiately under the situation for fixing the bug, and it is reasonable to return from readdir() when filldir() fails. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05sysfs: fix race between readdir and lseekMing Lei1-1/+12
commit 991f76f837bf22c5bb07261cfd86525a0a96650c upstream. While readdir() is running, lseek() may set filp->f_pos as zero, then may leave filp->private_data pointing to one sysfs_dirent object without holding its reference counter, so the sysfs_dirent object may be used after free in next readdir(). This patch holds inode->i_mutex to avoid the problem since the lock is always held in readdir path. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05staging: comedi: s626: fix continuous acquisitionIan Abbott1-1/+1
commit e4317ce877a31dbb9d96375391c1c4ad2210d637 upstream. For the s626 driver, there is a bug in the handling of asynchronous commands on the AI subdevice when the stop source is `TRIG_NONE`. The command should run continuously until cancelled, but the interrupt handler stops the command running after the first scan. The command set-up function `s626_ai_cmd()` contains this code: switch (cmd->stop_src) { case TRIG_COUNT: /* data arrives as one packet */ devpriv->ai_sample_count = cmd->stop_arg; devpriv->ai_continous = 0; break; case TRIG_NONE: /* continous acquisition */ devpriv->ai_continous = 1; devpriv->ai_sample_count = 0; break; } The interrupt handler `s626_irq_handler()` contains this code: if (!(devpriv->ai_continous)) devpriv->ai_sample_count--; if (devpriv->ai_sample_count <= 0) { devpriv->ai_cmd_running = 0; /* ... */ } So `devpriv->ai_sample_count` is only decremented for the `TRIG_COUNT` case, but `devpriv->ai_cmd_running` is set to 0 (and the command stopped) regardless. Fix this in `s626_ai_cmd()` by setting `devpriv->ai_sample_count = 1` for the `TRIG_NONE` case. The interrupt handler will not decrement it so it will remain greater than 0 and the check for stopping the acquisition will fail. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Bluetooth: Add support for Dell[QCA 0cf3:817a]Ming Lei2-0/+3
commit ebaf5795ef57a70a042ea259448a465024e2821d upstream. Add support for the AR9462 chip T: Bus=03 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=817a Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Bluetooth: Add support for Dell[QCA 0cf3:0036]Ming Lei2-0/+3
commit d66629c1325399cf080ba8b2fb086c10e5439cdd upstream. Add support for the AR9462 chip T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=0036 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05Bluetooth: Fix not closing SCO sockets in the BT_CONNECT2 stateVinicius Costa Gomes1-0/+1
commit eb20ff9c91ddcb2d55c1849a87d3db85af5e88a9 upstream. With deferred setup for SCO, it is possible that userspace closes the socket when it is in the BT_CONNECT2 state, after the Connect Request is received but before the Accept Synchonous Connection is sent. If this happens the following crash was observed, when the connection is terminated: [ +0.000003] hci_sync_conn_complete_evt: hci0 status 0x10 [ +0.000005] sco_connect_cfm: hcon ffff88003d1bd800 bdaddr 40:98:4e:32:d7:39 status 16 [ +0.000003] sco_conn_del: hcon ffff88003d1bd800 conn ffff88003cc8e300, err 110 [ +0.000015] BUG: unable to handle kernel NULL pointer dereference at 0000000000000199 [ +0.000906] IP: [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] PGD 3d21f067 PUD 3d291067 PMD 0 [ +0.000000] Oops: 0002 [#1] SMP [ +0.000000] Modules linked in: rfcomm bnep btusb bluetooth [ +0.000000] CPU 0 [ +0.000000] Pid: 1481, comm: kworker/u:2H Not tainted 3.9.0-rc1-25019-gad82cdd #1 Bochs Bochs [ +0.000000] RIP: 0010:[<ffffffff810620dd>] [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] RSP: 0018:ffff88003c3c19d8 EFLAGS: 00010002 [ +0.000000] RAX: 0000000000000001 RBX: 0000000000000246 RCX: 0000000000000000 [ +0.000000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003d1be868 [ +0.000000] RBP: ffff88003c3c1a98 R08: 0000000000000002 R09: 0000000000000000 [ +0.000000] R10: ffff88003d1be868 R11: ffff88003e20b000 R12: 0000000000000002 [ +0.000000] R13: ffff88003aaa8000 R14: 000000000000006e R15: ffff88003d1be850 [ +0.000000] FS: 0000000000000000(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 [ +0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ +0.000000] CR2: 0000000000000199 CR3: 000000003c1cb000 CR4: 00000000000006b0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ +0.000000] Process kworker/u:2H (pid: 1481, threadinfo ffff88003c3c0000, task ffff88003aaa8000) [ +0.000000] Stack: [ +0.000000] ffffffff81b16342 0000000000000000 0000000000000000 ffff88003d1be868 [ +0.000000] ffffffff00000000 00018c0c7863e367 000000003c3c1a28 ffffffff8101efbd [ +0.000000] 0000000000000000 ffff88003e3d2400 ffff88003c3c1a38 ffffffff81007c7a [ +0.000000] Call Trace: [ +0.000000] [<ffffffff8101efbd>] ? kvm_clock_read+0x34/0x3b [ +0.000000] [<ffffffff81007c7a>] ? paravirt_sched_clock+0x9/0xd [ +0.000000] [<ffffffff81007fd4>] ? sched_clock+0x9/0xb [ +0.000000] [<ffffffff8104fd7a>] ? sched_clock_local+0x12/0x75 [ +0.000000] [<ffffffff810632d1>] lock_acquire+0x93/0xb1 [ +0.000000] [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffff8105f3d8>] ? lock_release_holdtime.part.22+0x4e/0x55 [ +0.000000] [<ffffffff814f6038>] _raw_spin_lock+0x40/0x74 [ +0.000000] [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffff814f6936>] ? _raw_spin_unlock+0x23/0x36 [ +0.000000] [<ffffffffa0022339>] spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffffa00230cc>] sco_conn_del+0x76/0xbb [bluetooth] [ +0.000000] [<ffffffffa002391d>] sco_connect_cfm+0x2da/0x2e9 [bluetooth] [ +0.000000] [<ffffffffa000862a>] hci_proto_connect_cfm+0x38/0x65 [bluetooth] [ +0.000000] [<ffffffffa0008d30>] hci_sync_conn_complete_evt.isra.79+0x11a/0x13e [bluetooth] [ +0.000000] [<ffffffffa000cd96>] hci_event_packet+0x153b/0x239d [bluetooth] [ +0.000000] [<ffffffff814f68ff>] ? _raw_spin_unlock_irqrestore+0x48/0x5c [ +0.000000] [<ffffffffa00025f6>] hci_rx_work+0xf3/0x2e3 [bluetooth] [ +0.000000] [<ffffffff8103efed>] process_one_work+0x1dc/0x30b [ +0.000000] [<ffffffff8103ef83>] ? process_one_work+0x172/0x30b [ +0.000000] [<ffffffff8103e07f>] ? spin_lock_irq+0x9/0xb [ +0.000000] [<ffffffff8103fc8d>] worker_thread+0x123/0x1d2 [ +0.000000] [<ffffffff8103fb6a>] ? manage_workers+0x240/0x240 [ +0.000000] [<ffffffff81044211>] kthread+0x9d/0xa5 [ +0.000000] [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60 [ +0.000000] [<ffffffff814f75bc>] ret_from_fork+0x7c/0xb0 [ +0.000000] [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60 [ +0.000000] Code: d7 44 89 8d 50 ff ff ff 4c 89 95 58 ff ff ff e8 44 fc ff ff 44 8b 8d 50 ff ff ff 48 85 c0 4c 8b 95 58 ff ff ff 0f 84 7a 04 00 00 <f0> ff 80 98 01 00 00 83 3d 25 41 a7 00 00 45 8b b5 e8 05 00 00 [ +0.000000] RIP [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] RSP <ffff88003c3c19d8> [ +0.000000] CR2: 0000000000000199 [ +0.000000] ---[ end trace e73cd3b52352dd34 ]--- Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Tested-by: Frederic Dalleau <frederic.dalleau@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_lockedTrond Myklebust1-2/+7
commit 1166fde6a923c30f4351515b6a9a1efc513e7d00 upstream. We need to be careful when testing task->tk_waitqueue in rpc_wake_up_task_queue_locked, because it can be changed while we are holding the queue->lock. By adding appropriate memory barriers, we can ensure that it is safe to test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORERAndrew Morton1-1/+1
commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream. __ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorerBen Hutchings13-0/+17
Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side struct sigaction declarations'. flush_signal_handlers() needs to know whether sigaction::sa_restorer is defined, not whether SA_RESTORER is defined. Define the __ARCH_HAS_SA_RESTORER macro to indicate this. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Linux 3.0.71v3.0.71Greg Kroah-Hartman1-1/+1
2013-03-28asus-laptop: Do not call HWRS on initBen Hutchings1-13/+4
commit cb7da022450cdaaebd33078b6b32fb7dd2aaf6db upstream. Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by: ryan <draziw+deb@gmail.com> References: http://bugs.debian.org/692436 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28rt2x00: error in configurations with mesh support disabledFelix Fietkau1-0/+2
commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. [Backported for 3.8-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d 3.9-rc1.] Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Reviewed-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28exec: use -ELOOP for max recursion depthKees Cook5-17/+6
commit d740269867021faf4ce38a449353d2b986c34a67 upstream. To avoid an explosion of request_module calls on a chain of abusive scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon as maximum recursion depth is hit, the error will fail all the way back up the chain, aborting immediately. This also has the side-effect of stopping the user's shell from attempting to reexecute the top-level file as a shell script. As seen in the dash source: if (cmd != path_bshell && errno == ENOEXEC) { *argv-- = cmd; *argv = cmd = path_bshell; goto repeat; } The above logic was designed for running scripts automatically that lacked the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC, things continue to behave as the shell expects. Additionally, when tracking recursion, the binfmt handlers should not be involved. The recursion being tracked is the depth of calls through search_binary_handler(), so that function should be exclusively responsible for tracking the depth. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28i915: initialize CADL in opregionLekensteyn1-1/+22
commit d627b62ff8d4d36761adbcd90ff143d79c94ab22 upstream. This is rather a hack to fix brightness hotkeys on a Clevo laptop. CADL is not used anywhere in the driver code at the moment, but it could be used in BIOS as is the case with the Clevo laptop. The Clevo B7130 requires the CADL field to contain at least the ID of the LCD device. If this field is empty, the ACPI methods that are called on pressing brightness / display switching hotkeys will not trigger a notification. As a result, it appears as no hotkey has been pressed. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=45452 Tested-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28udf: avoid info leak on exportMathias Krause1-0/+1
commit 0143fc5e9f6f5aad4764801015bc8d4b4a278200 upstream. For type 0x51 the udf.parent_partref member in struct fid gets copied uninitialized to userland. Fix this by initializing it to 0. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Jan Kara <jack@suse.cz> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28isofs: avoid info leak on exportMathias Krause1-0/+1
commit fe685aabf7c8c9f138e5ea900954d295bf229175 upstream. For type 1 the parent_offset member in struct isofs_fid gets copied uninitialized to userland. Fix this by initializing it to 0. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Jan Kara <jack@suse.cz> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and ↵Mathieu Desnoyers2-10/+9
security keys commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream. Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to compat_process_vm_rw() shows that the compatibility code requires an explicit "access_ok()" check before calling compat_rw_copy_check_uvector(). The same difference seems to appear when we compare fs/read_write.c:do_readv_writev() to fs/compat.c:compat_do_readv_writev(). This subtle difference between the compat and non-compat requirements should probably be debated, as it seems to be error-prone. In fact, there are two others sites that use this function in the Linux kernel, and they both seem to get it wrong: Now shifting our attention to fs/aio.c, we see that aio_setup_iocb() also ends up calling compat_rw_copy_check_uvector() through aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to be missing. Same situation for security/keys/compat.c:compat_keyctl_instantiate_key_iov(). I propose that we add the access_ok() check directly into compat_rw_copy_check_uvector(), so callers don't have to worry about it, and it therefore makes the compat call code similar to its non-compat counterpart. Place the access_ok() check in the same location where copy_from_user() can trigger a -EFAULT error in the non-compat code, so the ABI behaviors are alike on both compat and non-compat. While we are here, fix compat_do_readv_writev() so it checks for compat_rw_copy_check_uvector() negative return values. And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error handling. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28key: Fix resource leakAlan Cox1-2/+2
commit a84a921978b7d56e0e4b87ffaca6367429b4d8ff upstream. On an error iov may still have been reallocated and need freeing Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: io_ti: fix get_icount for two port adaptersJohan Hovold1-0/+1
commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: garmin_gps: fix memory leak on disconnectJohan Hovold1-6/+1
commit 618aa1068df29c37a58045fe940f9106664153fd upstream. Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28udf: Fix bitmap overflow on large filesystems with small block sizeJan Kara1-1/+1
commit 89b1f39eb4189de745fae554b0d614d87c8d5c63 upstream. For large UDF filesystems with 512-byte blocks the number of necessary bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows (the number will overflow for filesystems larger than 128 GB with 512-byte blocks). That results in ENOSPC errors despite the filesystem has plenty of free space. Fix the problem by changing s_nr_groups' type to 'int'. That is enough even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize. Reported-and-tested-by: v10lator@myway.de Signed-off-by: Jan Kara <jack@suse.cz> Cc: Jim Trigg <jtrigg@spamcop.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: serial: fix interface refcountingJohan Hovold1-1/+2
commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: xhci - fix bit definitions for IMAN registerDmitry Torokhov1-2/+2
commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28x86-64: Fix the failure case in copy_user_handle_tail()CQ Tang1-2/+2
commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream. The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by: CQ Tang <cq.tang@intel.com> Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28clockevents: Don't allow dummy broadcast timersMark Rutland1-1/+2
commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream. Currently tick_check_broadcast_device doesn't reject clock_event_devices with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real hardware if they have a higher rating value. In this situation, the dummy timer is responsible for broadcasting to itself, and the core clockevents code may attempt to call non-existent callbacks for programming the dummy, eventually leading to a panic. This patch makes tick_check_broadcast_device always reject dummy timers, preventing this problem. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28IPoIB: Fix send lockup due to missed TX completionMike Marciniszyn1-2/+6
commit 1ee9e2aa7b31427303466776f455d43e5e3c9275 upstream. Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM traffic") attempts to solve an issue where unprocessed UD send completions can deadlock the netdev. The patch doesn't fully resolve the issue because if more than half the tx_outstanding's were UD and all of the destinations are RC reachable, arming the CQ doesn't solve the issue. This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the ib_req_notify_cq(). If the rc is above 0, the UD send cq completion callback is called directly to re-arm the send completion timer. This issue is seen in very large parallel filesystem deployments and the patch has been shown to correct the issue. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 14:30:40 +0300