| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit ee38ea0ae4ed13fe33e033dc98d11e76bc7167cd upstream.
The minimum firmware versions required for user queue functionality
have been increased to address an issue where the queue privilege
state was lost during queue connect operations.
The problem occurred because the privilege state was being restored
to its initial value at the beginning of the function, overwriting
the state that was properly set during the queue connect case.
This commit updates the minimum version requirements:
- ME firmware from 2390 to 2420
- PFP firmware from 2530 to 2580
- MEC firmware from 2600 to 2650
- MES firmware remains at 120
These updated firmware versions contain the necessary fixes to
properly maintain queue privilege state throughout connect operations.
Fixes: 61ca97e9590c ("drm/amdgpu: Add fw minimum version check for usermode queue")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5f976c9939f0d5916d2b8ef3156a6d1799781df1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c767d74a9cdd1042046d02319d16b85d9aa8a8aa upstream.
If the doorbell is invalid, be sure to set the r to an error
state so the function returns an error.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7e2a5b0a9a165a7c51274aa01b18be29491b4345)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5dff50802b285da8284a7bf17ae2fdc6f1357023 upstream.
the PPSMC_MSG_GetPptLimit msg is not valid for gfx 11.0.3 on vf mode,
so skiped to create power1_cap* hwmon sysfs node.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e82a8d441038d8cb10b63047a9e705c42479d156)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f403699c40f0806a707a9a6eed3b8904224021a upstream.
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit daab47925c06a04792ca720d8438abd37775e357 upstream.
After a recent change in clang to expose uninitialized warnings from
const variables and pointers [1], there is a warning around crtc_state
in dpu_plane_virtual_atomic_check():
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1145:6: error: variable 'crtc_state' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
1145 | if (plane_state->crtc)
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1149:58: note: uninitialized use occurs here
1149 | ret = dpu_plane_atomic_check_nosspp(plane, plane_state, crtc_state);
| ^~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1145:2: note: remove the 'if' if its condition is always true
1145 | if (plane_state->crtc)
| ^~~~~~~~~~~~~~~~~~~~~~
1146 | crtc_state = drm_atomic_get_new_crtc_state(state,
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1139:35: note: initialize the variable 'crtc_state' to silence this warning
1139 | struct drm_crtc_state *crtc_state;
| ^
| = NULL
Initialize crtc_state to NULL like other places in the driver do, so
that it is consistently initialized.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2106
Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes")
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66e82b6e0a28d4970383e1ee5d60f431001128cd upstream.
Function nvkm_gsp_fwsec_v2() sets 'ret' if the kmemdup() call fails, but
it never uses or returns 'ret' after that point. We always need to release
the firmware regardless, so do that and then check for error.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2fe0c54fb7401e6ecd3c10348519ab9e23bd639 upstream.
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org
Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Signed-off-by: James Jones <jajones@nvidia.com>
Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b55ddf36229e0278c956215784ab1feeff510aa upstream.
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 06951c2ee72d ("drm/xe: Use NULL PTEs as scratch PTEs")
Cc: Brian Welty <brian.welty@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821143045.106005-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae668cd567a6a7622bc813ee0bb61c42bed61ba7 upstream.
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines")
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e08fa789d39aa01923e3ba144bd808291895c3c upstream.
We were returning -EOPNOTSUPP for various remap_file_range cases
but for some of these the copy_file_range_syscall() requires -EINVAL
to be returned (e.g. where source and target file ranges overlap when
source and target are the same file). This fixes xfstest generic/157
which was expecting EINVAL for that (and also e.g. for when the src
offset is beyond end of file).
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e81a7f65288c7e2cfb7e7890f648e099fd885ab3 upstream.
Add the following Telit Cinterion LE910C4-WWX new compositions:
0x1034: tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1034 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1037 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1038 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab529e6ca1f67bcf31f3ea80c72bffde2e9e053e upstream.
A possible inconsistent update of refcount was identified in `smb2_compound_op`.
Such inconsistent update could lead to possible resource leaks.
Why it is a possible bug:
1. In the comment section of the function, it clearly states that the
reference to `cfile` should be dropped after calling this function.
2. Every control flow path would check and drop the reference to
`cfile`, except the patched one.
3. Existing callers would not handle refcount update of `cfile` if
-ENOMEM is returned.
To fix the bug, an extra goto label "out" is added, to make sure that the
cleanup logic would always be respected. As the problem is caused by the
allocation failure of `vars`, the cleanup logic between label "finished"
and "out" can be safely ignored. According to the definition of function
`is_replayable_error`, the error code of "-ENOMEM" is not recoverable.
Therefore, the replay logic also gets ignored.
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89a2d212bdb4bc29bed8e7077abe054b801137ea upstream.
When CONFIG_DMA_DIRECT_REMAP is enabled, atomic pool pages are
remapped via dma_common_contiguous_remap() using the supplied
pgprot. Currently, the mapping uses
pgprot_dmacoherent(PAGE_KERNEL), which leaves the memory encrypted
on systems with memory encryption enabled (e.g., ARM CCA Realms).
This can cause the DMA layer to fail or crash when accessing the
memory, as the underlying physical pages are not configured as
expected.
Fix this by requesting a decrypted mapping in the vmap() call:
pgprot_decrypted(pgprot_dmacoherent(PAGE_KERNEL))
This ensures that atomic pool memory is consistently mapped
unencrypted.
Cc: stable@vger.kernel.org
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250811181759.998805-1-sdonthineni@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 198f36f902ec7e99b645382505f74b87a4523ed9 upstream.
If preparing a write bio fails then blk_zone_wplug_bio_work() calls
bio_endio() with zwplug->lock held. If a device mapper driver is stacked
on top of the zoned block device then this results in nested locking of
zwplug->lock. The resulting lockdep complaint is a false positive
because this is nested locking and not recursive locking. Suppress this
false positive by calling blk_zone_wplug_bio_io_error() without holding
zwplug->lock. This is safe because no code in
blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This
patch suppresses the following lockdep complaint:
WARNING: possible recursive locking detected
--------------------------------------------
kworker/3:0H/46 is trying to acquire lock:
ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0
but task is already holding lock:
ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&zwplug->lock);
lock(&zwplug->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/3:0H/46:
#0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c
stack backtrace:
CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: sdd_zwplugs blk_zone_wplug_bio_work
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_deadlock_bug+0x38c/0x398
__lock_acquire+0x13e8/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
blk_zone_write_plug_bio_endio+0x64/0x1f0
bio_endio+0x9c/0x240
__dm_io_complete+0x214/0x260
clone_endio+0xe8/0x214
bio_endio+0x218/0x240
blk_zone_wplug_bio_work+0x204/0x48c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ceca927c86e6f72f72d45487a34368bc9509431d upstream.
Seen during KPTI initialization:
CFI failure at create_kpti_ng_temp_pgd+0x124/0xce8 (target: kpti_ng_pgd_alloc+0x0/0x14; expected type: 0xd61b88b6)
The call site is alloc_init_pud() at arch/arm64/mm/mmu.c:
pud_phys = pgtable_alloc(TABLE_PUD);
alloc_init_pud() has the prototype:
static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags)
where the pgtable_alloc() prototype is declared.
The target (kpti_ng_pgd_alloc) is used in arch/arm64/kernel/cpufeature.c:
create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc), KPTI_NG_TEMP_VA,
PAGE_SIZE, PAGE_KERNEL, kpti_ng_pgd_alloc, 0);
which is an alias for __create_pgd_mapping_locked() with prototype:
extern __alias(__create_pgd_mapping_locked)
void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys,
unsigned long virt,
phys_addr_t size, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags);
__create_pgd_mapping_locked() passes the function pointer down:
__create_pgd_mapping_locked() -> alloc_init_p4d() -> alloc_init_pud()
But the target function (kpti_ng_pgd_alloc) has the wrong signature:
static phys_addr_t __init kpti_ng_pgd_alloc(int shift);
The "int" should be "enum pgtable_type".
To make "enum pgtable_type" available to cpufeature.c, move
enum pgtable_type definition from arch/arm64/mm/mmu.c to
arch/arm64/include/asm/mmu.h.
Adjust kpti_ng_pgd_alloc to use "enum pgtable_type" instead of "int".
The function behavior remains identical (parameter is unused).
Fixes: c64f46ee1377 ("arm64: mm: use enum to identify pgtable level instead of *_SHIFT")
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829190721.it.373-kees@kernel.org
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac4ed2da4c1305a1a002415058aa7deaf49ffe3e upstream.
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 185c926283da67a72df20a63a5046b3b4631b7d9 upstream.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
Signed-off-by: Minjong Kim <minbell.kim@samsung.com>
Link: https://patch.msgid.link/20250813-hid-ntrig-page-fault-fix-v2-1-f98581f35106@samsung.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9fc51941d9e7793da969b2c66e6f8213c5b1237f upstream.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab1bb82f3db20e23eace06db52031b1164a110c2 upstream.
Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
or directly. This nano receiver appears to work identically to the 1_1
receiver for the case I've verified, which is the battery status through
lg-hidpp.
The same appears to be the case wired, sharing much with the Pro X
Superlight 2; differences seemed to lie in userland configuration rather
than in interfaces used by hid_logitech_hidpp on the kernel side.
I verified the sysfs interface for battery charge/discharge status, and
capacity read to be working on my 910-007290 device (white).
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f3214aae9f49faf495f3836216afbc6c5400b2e upstream.
The Legion Go features detachable controllers which support a dual
dinput mode. In this mode, the controllers appear under a single HID
device with two applications.
Currently, both controllers appear under the same event device, causing
their controls to be mixed up. This patch separates the two so that
they can be used independently.
In addition, the latest firmware update for the Legion Go swaps the IDs
to the ones used by the Legion Go 2, so add those IDs as well.
[jkosina@suse.com: improved shortlog]
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 832e5777143e799a97e8f9b96f002a90f06ba548 upstream.
The DT2DRBK trackball has 8 buttons, but the report descriptor only
specifies 5. This patch adds the device ID and performs a similar fixup as
for other ELECOM devices to enable the remaining 3 buttons.
Signed-off-by: Martin Hilgendorf <martin.hilgendorf@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0379eb8691b9c4477da0277ae0832036ca4410b4 upstream.
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...]
Fixes: c8000deb6836 ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3af6ca9a8c34bbd8cff32b469b84c9021c9e7e4 upstream.
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfree+0xcf/0x350
[ 21.673700] input_dev_release+0xab/0xd0
[ 21.673700] device_release+0x9f/0x220
[ 21.673700] kobject_put+0x12b/0x220
[ 21.673700] put_device+0x12/0x20
[ 21.673700] input_free_device+0x4c/0xb0
[ 21.673700] hidinput_connect+0x1862/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
Fixes: 9ce12d8be12c ("HID: asus: Add i2c touchpad support")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250810181041.44874-1-qasdev00@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2415c407a2cde01290d52ce2a1f81b0616379a3 upstream.
Prior to the topology parsing rewrite and the switchover to the new parsing
logic for AMD processors in
c749ce393b8f ("x86/cpu: Use common topology code for AMD"),
the initial_apicid on these platforms was:
- First initialized to the LocalApicId from CPUID leaf 0x1 EBX[31:24].
- Then overwritten by the ExtendedLocalApicId in CPUID leaf 0xb
EDX[31:0] on processors that supported topoext.
With the new parsing flow introduced in
f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser"),
parse_8000_001e() now unconditionally overwrites the initial_apicid already
parsed during cpu_parse_topology_ext().
Although this has not been a problem on baremetal platforms, on virtualized AMD
guests that feature more than 255 cores, QEMU zeros out the CPUID leaf
0x8000001e on CPUs with CoreID > 255 to prevent collision of these IDs in
EBX[7:0] which can only represent a maximum of 255 cores [1].
This results in the following FW_BUG being logged when booting a guest
with more than 255 cores:
[Firmware Bug]: CPU 512: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0200
AMD64 Architecture Programmer's Manual Volume 2: System Programming Pub.
24593 Rev. 3.42 [2] Section 16.12 "x2APIC_ID" mentions the Extended
Enumeration leaf 0xb (Fn0000_000B_EDX[31:0])(which was later superseded by the
extended leaf 0x80000026) provides the full x2APIC ID under all circumstances
unlike the one reported by CPUID leaf 0x8000001e EAX which depends on the mode
in which APIC is configured.
Rely on the APIC ID parsed during cpu_parse_topology_ext() from CPUID leaf
0x80000026 or 0xb and only use the APIC ID from leaf 0x8000001e if
cpu_parse_topology_ext() failed (has_topoext is false).
On platforms that support the 0xb leaf (Zen2 or later, AMD guests on
QEMU) or the extended leaf 0x80000026 (Zen4 or later), the
initial_apicid is now set to the value parsed from EDX[31:0].
On older AMD/Hygon platforms that do not support the 0xb leaf but support the
TOPOEXT extension (families 0x15, 0x16, 0x17[Zen1], and Hygon), retain current
behavior where the initial_apicid is set using the 0x8000001e leaf.
Issue debugged by Naveen N Rao (AMD) <naveen@kernel.org> and Sairaj Kodilkar
<sarunkod@amd.com>.
[ bp: Massage commit message. ]
Fixes: c749ce393b8f ("x86/cpu: Use common topology code for AMD")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Naveen N Rao (AMD) <naveen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/qemu/qemu/commit/35ac5dfbcaa4b [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [2]
Link: https://lore.kernel.org/20250825075732.10694-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fcf8239ad6a5de54fa7ce18e464c6b5951b982cb upstream.
Machines can be shipped without any microcode in the BIOS. Which means,
the microcode patch revision is 0.
Handle that gracefully.
Fixes: 94838d230a6c ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: Vítek Vávra <vit.vavra.kh@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24963ae1b0b6596dc36e352c18593800056251d8 upstream.
Pentium 4's which are INTEL_P4_PRESCOTT (model 0x03) and later have
a constant TSC. This was correctly captured until commit fadb6f569b10
("x86/cpu/intel: Limit the non-architectural constant_tsc model checks").
In that commit, an error was introduced while selecting the last P4
model (0x06) as the upper bound. Model 0x06 was transposed to
INTEL_P4_WILLAMETTE, which is just plain wrong. That was presumably a
simple typo, probably just copying and pasting the wrong P4 model.
Fix the constant TSC logic to cover all later P4 models. End at
INTEL_P4_CEDARMILL which accurately corresponds to the last P4 model.
Fixes: fadb6f569b10 ("x86/cpu/intel: Limit the non-architectural constant_tsc model checks")
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250816065126.5000-1-suchitkarunakaran%40gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799766208f09f95677a9ab111b93872d414fbad7 upstream.
The userspace load can put up to 2048 bits into an xlen bit stack
buffer. We want only xlen bits, so check the size beforehand.
Fixes: 2fa290372dfe ("RISC-V: KVM: add 'vlenb' Vector CSR")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Link: https://lore.kernel.org/r/20250805104418.196023-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c87bd4dd43a624109c3cc42d843138378a7f4548 upstream.
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels.
Signed-off-by: Thijs Raymakers <thijs@raymakers.nl>
Cc: stable@vger.kernel.org
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 715062970f37 ("KVM: X86: Implement PV sched yield hypercall")
Fixes: bdf7ffc89922 ("KVM: LAPIC: Fix pv ipis out-of-bounds access")
Fixes: 4180bf1b655a ("KVM: X86: Implement "send IPI" hypercall")
Link: https://lore.kernel.org/r/20250804064405.4802-1-thijs@raymakers.nl
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c34414883f773412964404d77cd2fea04c6f7d60 ]
In mtk_hdmi driver, a recent change replaced custom register access
function calls by regmap ones, but two replacements by regmap_update_bits
were done incorrectly, because original offset and mask parameters were
inverted, so fix them.
Fixes: d6e25b3590a0 ("drm/mediatek: hdmi: Use regmap instead of iomem for main registers")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250818-mt8173-fix-hdmi-issue-v1-1-55aff9b0295d@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98b6fa62c84f2e129161e976a5b9b3cb4ccd117b ]
Since the buffers are mapped from userspace, it is prudent to use
READ_ONCE() to read the value into a local variable, and use that for
any other actions taken. Having a stable read of the buffer length
avoids worrying about it changing after checking, or being read multiple
times.
Similarly, the buffer may well change in between it being picked and
being committed. Ensure the looping for incremental ring buffer commit
stops if it hits a zero sized buffer, as no further progress can be made
at that point.
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://lore.kernel.org/io-uring/tencent_000C02641F6250C856D0C26228DE29A3D30A@qq.com/
Reported-by: Qingyue Zhang <chunzhennn@qq.com>
Reported-by: Suoxing Zhang <aftern00n@qq.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dac978e51cce0c1f00a14c4a82f81d387f79b2d4 ]
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6358f8cf64850f3f27857b8ed8c1b08cfc4685c ]
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ede14a2c6365e7e5d855643c7c8390b5268c467 ]
The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b8c88f875c04d4cb9111bd5dd9291c7e9691bf5 ]
pppol2tp_session_get_sock() is using RCU, it must be ready
for sk_refcnt being zero.
Commit ee40fb2e1eb5 ("l2tp: protect sock pointer of
struct pppol2tp_session with RCU") was correct because it
had a call_rcu(..., pppol2tp_put_sk) which was later removed in blamed commit.
pppol2tp_recv() can use pppol2tp_session_get_sock() as well.
Fixes: c5cbaef992d6 ("l2tp: refactor ppp socket/session relationship")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250826134435.1683435-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e8750469242cad8f01f320131fd5a6f540dbb99 ]
syzbot found that sin6_scope_id was not properly initialized,
leading to undefined behavior.
Clear sin6_scope_id and sin6_flowinfo.
BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649
__sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649
sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983
sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390
sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452
sctp_get_port net/sctp/socket.c:8523 [inline]
sctp_listen_start net/sctp/socket.c:8567 [inline]
sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636
__sys_listen_socket net/socket.c:1912 [inline]
__sys_listen net/socket.c:1927 [inline]
__do_sys_listen net/socket.c:1932 [inline]
__se_sys_listen net/socket.c:1930 [inline]
__x64_sys_listen+0x343/0x4c0 net/socket.c:1930
x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable addr.i.i created at:
sctp_get_port net/sctp/socket.c:8515 [inline]
sctp_listen_start net/sctp/socket.c:8567 [inline]
sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636
__sys_listen_socket net/socket.c:1912 [inline]
__sys_listen net/socket.c:1927 [inline]
__do_sys_listen net/socket.c:1932 [inline]
__se_sys_listen net/socket.c:1930 [inline]
__x64_sys_listen+0x343/0x4c0 net/socket.c:1930
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+e69f06a0f30116c68056@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68adc0a2.050a0220.37038e.00c4.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250826141314.1802610-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da9c9c877597170b929a6121a68dcd3dd9a80f45 ]
Current implementation maintains two separate reference counting
mechanisms: the 'count' field in struct rose_neigh tracks references from
rose_node structures, while the 'use' field (now refcount_t) tracks
references from rose_sock.
This patch merges these two reference counting systems using 'use' field
for proper reference management. Specifically, this patch adds incrementing
and decrementing of rose_neigh->use when rose_neigh->count is incremented
or decremented.
This patch also modifies rose_rt_free(), rose_rt_device_down() and
rose_clear_route() to properly release references to rose_neigh objects
before freeing a rose_node through rose_remove_node().
These changes ensure rose_neigh structures are properly freed only when
all references, including those from rose_node structures, are released.
As a result, this resolves a slab-use-after-free issue reported by Syzbot.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+942297eecf7d2d61d1f1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=942297eecf7d2d61d1f1
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-4-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d860d1faa6b2ce3becfdb8b0c2b048ad31800061 ]
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-3-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcb34659028f856c423a29ef9b4e2571d203444d ]
The current rose_remove_neigh() performs two distinct operations:
1. Removes rose_neigh from rose_neigh_list
2. Frees the rose_neigh structure
Split these operations into separate functions to improve maintainability
and prepare for upcoming refcount_t conversion. The timer cleanup remains
in rose_remove_neigh() because free operations can be called from timer
itself.
This patch introduce rose_neigh_put() to handle the freeing of rose_neigh
structures and modify rose_remove_neigh() to handle removal only.
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-2-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d860d1faa6b2 ("net: rose: convert 'use' field to refcount_t")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c64eff368ac676e8540344d27a3de47e0ad90d21 ]
When importing and using buffers, buf->len is considered unsigned.
However, buf->len is converted to signed int when committing. This can
lead to unexpected behavior if the buffer is large enough to be
interpreted as a negative value. Make min_t calculation unsigned.
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Co-developed-by: Suoxing Zhang <aftern00n@qq.com>
Signed-off-by: Suoxing Zhang <aftern00n@qq.com>
Signed-off-by: Qingyue Zhang <chunzhennn@qq.com>
Link: https://lore.kernel.org/r/tencent_4DBB3674C0419BEC2C0C525949DA410CA307@qq.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9448ccd853368582efa9db05db344f8bb9dffe0f ]
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c749d ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1eded580ab28119de0b0f21efe37ee2b4419144 ]
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 42ef11b2bff5b6a2910c28d2ea47cc00e0fbcaec ]
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214a7 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214a7 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f23382841e67174211271a454811dd17c0ef3c5 ]
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aca0c31af61e0d5cf1675a0cbd29460b95ae693c ]
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d24341740fe48add8a227a753e68b6eedf4b385a ]
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb ]
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf9a8627b9a369ba01d37be6f71b297beb688faa ]
Changing flow steering modes is not allowed when eswitch is in switchdev
mode. This fix ensures that any steering mode change, including to
firmware steering, is correctly blocked while eswitch mode is switchdev.
Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26e42ec7712d392d561964514b1f253b1a96f42d ]
If PF (Physical Function) has SFs (Sub-Functions), since the SFs are not
taking part in the synchronization flow, sync reset can lead to fatal
error on the SFs, as the function will be closed unexpectedly from the
SF point of view.
Add a check to prevent sync reset when there are SFs on a PF device
which is not ECPF, as ECPF is teardowned gracefully before reset.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 902a8bc23a24882200f57cadc270e15a2cfaf2bb ]
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 7a9770f1bfea ("net/mlx5: Handle sync reset unload event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34cc6a54914f478c93e176450fae6313404f9f74 ]
The devlink reload fw_activate command performs firmware activation
followed by driver reload, while devlink reload driver_reinit triggers
only driver reload. However, the driver reload logic differs between the
two modes, as on driver_reinit mode mlx5 also reloads auxiliary drivers,
while in fw_activate mode the auxiliary drivers are suspended where
applicable.
Additionally, following the cited commit, if the device has multiple PFs,
the behavior during fw_activate may vary between PFs: one PF may suspend
auxiliary drivers, while another reloads them.
Align devlink dev reload fw_activate behavior with devlink dev reload
driver_reinit, to reload all auxiliary drivers.
Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
