| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit af0db3c1f898144846d4c172531a199bb3ca375d upstream.
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Reported-and-tested-by: syzbot+c4b7aa0513823e2ea880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c4b7aa0513823e2ea880
Signed-off-by: Sravan Kumar Gundu <sravankumarlpu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aba6faec0103ed8f169be8dce2ead41fcb689446 upstream.
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David]
Link: https://lkml.kernel.org/r/20250807200418.1963585-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250806220022.926763-1-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d94b19f066480addfcdcb5efde66152ad5a7c0e upstream.
The quotacheck doesn't initialize sc->ip.
Cc: stable@vger.kernel.org # v6.8
Fixes: 21d7500929c8a0 ("xfs: improve dquot iteration for scrub")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4289b494ac553e74e86fed1c66b2bf9530bc1082 upstream.
[BUG]
There is an internal report that balance triggered transaction abort,
with the following call trace:
item 85 key (594509824 169 0) itemoff 12599 itemsize 33
extent refs 1 gen 197740 flags 2
ref#0: tree block backref root 7
item 86 key (594558976 169 0) itemoff 12566 itemsize 33
extent refs 1 gen 197522 flags 2
ref#0: tree block backref root 7
...
BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0
BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117
------------[ cut here ]------------
BTRFS: Transaction aborted (error -117)
WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs]
And btrfs check doesn't report anything wrong related to the extent
tree.
[CAUSE]
The cause is a little complex, firstly the extent tree indeed doesn't
have the backref for 594526208.
The extent tree only have the following two backrefs around that bytenr
on-disk:
item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33
refs 1 gen 197740 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33
refs 1 gen 197522 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
But the such missing backref item is not an corruption on disk, as the
offending delayed ref belongs to subvolume 934, and that subvolume is
being dropped:
item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439
generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328
last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0
drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2
level 2 generation_v2 198229
And that offending tree block 594526208 is inside the dropped range of
that subvolume. That explains why there is no backref item for that
bytenr and why btrfs check is not reporting anything wrong.
But this also shows another problem, as btrfs will do all the orphan
subvolume cleanup at a read-write mount.
So half-dropped subvolume should not exist after an RW mount, and
balance itself is also exclusive to subvolume cleanup, meaning we
shouldn't hit a subvolume half-dropped during relocation.
The root cause is, there is no orphan item for this subvolume.
In fact there are 5 subvolumes from around 2021 that have the same
problem.
It looks like the original report has some older kernels running, and
caused those zombie subvolumes.
Thankfully upstream commit 8d488a8c7ba2 ("btrfs: fix subvolume/snapshot
deletion not triggered on mount") has long fixed the bug.
[ENHANCEMENT]
For repairing such old fs, btrfs-progs will be enhanced.
Considering how delayed the problem will show up (at run delayed ref
time) and at that time we have to abort transaction already, it is too
late.
Instead here we reject any half-dropped subvolume for reloc tree at the
earliest time, preventing confusion and extra time wasted on debugging
similar bugs.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b632596188e1973c6b3ac1c9f8252f735e1039f upstream.
__qgroup_excl_accounting() uses the qgroup iterator machinery to
update the account of one qgroups usage for all its parent hierarchy,
when we either add or remove a relation and have only exclusive usage.
However, there is a small bug there: we loop with an extra iteration
temporary qgroup called `cur` but never actually refer to that in the
body of the loop. As a result, we redundantly account the same usage to
the first qgroup in the list.
This can be reproduced in the following way:
mkfs.btrfs -f -O squota <dev>
mount <dev> <mnt>
btrfs subvol create <mnt>/sv
dd if=/dev/zero of=<mnt>/sv/f bs=1M count=1
sync
btrfs qgroup create 1/100 <mnt>
btrfs qgroup create 2/200 <mnt>
btrfs qgroup assign 1/100 2/200 <mnt>
btrfs qgroup assign 0/256 1/100 <mnt>
btrfs qgroup show <mnt>
and the broken result is (note the 2MiB on 1/100 and 0Mib on 2/100):
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 2.03MiB 2.03MiB 2/100<1 member qgroup>
2/100 0.00B 0.00B <0 member qgroups>
With this fix, which simply re-uses `qgroup` as the iteration variable,
we see the expected result:
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 1.02MiB 1.02MiB 2/100<1 member qgroup>
2/100 1.02MiB 1.02MiB <0 member qgroups>
The existing fstests did not exercise two layer inheritance so this bug
was missed. I intend to add that testing there, as well.
Fixes: a0bdc04b0732 ("btrfs: qgroup: use qgroup_iterator in __qgroup_excl_accounting()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit deaf895212da74635a7f0a420e1ecf8f5eca1fe5 upstream.
Inside nocow_one_range(), if the checksum cloning for data reloc inode
failed, we call btrfs_cleanup_ordered_extents() to cleanup the just
allocated ordered extents.
But unlike extent_clear_unlock_delalloc(),
btrfs_cleanup_ordered_extents() requires a length, not an inclusive end
bytenr.
This can be problematic, as the @end is normally way larger than @len.
This means btrfs_cleanup_ordered_extents() can be called on folios
out of the correct range, and if the out-of-range folio is under
writeback, we can incorrectly clear the ordered flag of the folio, and
trigger the DEBUG_WARN() inside btrfs_writepage_cow_fixup().
Fix the wrong parameter with correct length instead.
Fixes: 94f6c5c17e52 ("btrfs: move ordered extent cleanup to where they are allocated")
CC: stable@vger.kernel.org # 6.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a931e9b39c7ff8066657042f5f00d3b7e6ad315 upstream.
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc5799986fbca957e2e3c0480027f249951b7bcf upstream.
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a32e4f0025a74c70dcab4478e9b29c22f5ecf2f upstream.
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
A test case for fstests will be submitted soon.
Reported-by: Peter Jung <ptr1337@cachyos.org>
Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/
Reported-by: burneddi <burneddi@protonmail.com>
Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t
Reported-by: Russell Haley <yumpusamongus@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/
Fixes: f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 005b0a0c24e1628313e951516b675109a92cacfe upstream.
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d013495a80cbb53e2288af7ae0ec4170aafd7c upstream.
If we failed to insert the tree mod log operation, we are not removing the
dirty status from the allocated and dirtied extent buffer before we free
it. Removing the dirty status is needed for several reasons such as to
adjust the fs_info->dirty_metadata_bytes counter and remove the dirty
status from the respective folios. So add the missing call to
btrfs_clear_buffer_dirty().
Fixes: f61aa7ba08ab ("btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24e066ded45b8147b79c7455ac43a5bff7b5f378 upstream.
During log replay, at add_inode_ref(), if we have an extref item that
contains multiple extrefs and one of them points to a directory that does
not exist in the subvolume tree, we are supposed to ignore it and process
the remaining extrefs encoded in the extref item, since each extref can
point to a different parent inode. However when that happens we just
return from the function and ignore the remaining extrefs.
The problem has been around since extrefs were introduced, in commit
f186373fef00 ("btrfs: extended inode refs"), but it's hard to hit in
practice because getting extref items encoding multiple extref requires
getting a hash collision when computing the offset of the extref's
key. The offset if computed like this:
key.offset = btrfs_extref_hash(dir_ino, name->name, name->len);
and btrfs_extref_hash() is just a wrapper around crc32c().
Fix this by moving to next iteration of the loop when we don't find
the parent directory that an extref points to.
Fixes: f186373fef00 ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08530d6e638427e7e1344bd67bacc03882ba95b9 upstream.
When quotas are disabled qgroup ioctls are supposed to return -ENOTCONN,
but the qgroup create ioctl stopped doing that when it races with a quota
disable operation, returning 0 instead. This change of behaviour happened
in commit 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot
creation").
The issue happens as follows:
1) Task A enters btrfs_ioctl_qgroup_create(), qgroups are enabled and so
qgroup_enabled() returns true since fs_info->quota_root is not NULL;
2) Task B enters btrfs_ioctl_quota_ctl() -> btrfs_quota_disable() and
disables qgroups, so now fs_info->quota_root is NULL;
3) Task A enters btrfs_create_qgroup() and calls btrfs_qgroup_mode(),
which returns BTRFS_QGROUP_MODE_DISABLED since quotas are disabled,
and then btrfs_create_qgroup() returns 0 to the caller, which makes
the ioctl return 0 instead of -ENOTCONN.
The check for fs_info->quota_root and returning -ENOTCONN if it's NULL
is made only after the call btrfs_qgroup_mode().
Fix this by moving the check for disabled quotas with btrfs_qgroup_mode()
into transaction.c:create_pending_snapshot(), so that we don't abort the
transaction if btrfs_create_qgroup() returns -ENOTCONN and quotas are
disabled.
Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_uring_encoded_read()
commit ea124ec327086325fc096abf42837dac471ac7ae upstream.
btrfs_uring_encoded_read() returns early with -ENOTTY if the uring_cmd
is issued with IO_URING_F_COMPAT but the kernel doesn't support compat
syscalls. However, this early return bypasses the syscall accounting.
Go to out_acct instead to ensure the syscall is counted.
Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ef94169db0958d6de39f9ea6e063ce887342e2d upstream.
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new
btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
# --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
# +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
# @@ -1,2 +1,6 @@
# QA output created by 508
# Silence is golden
# +Before:
# +After : stat.btime = Thu Jan 1 09:30:00 1970
# +Before:
# +After : stat.btime = Wed Jul 2 14:53:22 2025
# ...
# (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)
Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test
case will be skipped using the current upstream kernel, as it doesn't
have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG
leaf 30507008 flags 0x1(WRITTEN) backref revision 1
checksum stored e522548d
checksum calced e522548d
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 9 transid 9 size 0 nbytes 0
block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0
sequence 1 flags 0x0(none)
atime 1751432947.492000000 (2025-07-02 14:39:07)
ctime 1751432947.492000000 (2025-07-02 14:39:07)
mtime 1751432947.492000000 (2025-07-02 14:39:07)
otime 0.0 (1970-01-01 09:30:00) <<<
But the old fs tree has all the correct time stamp:
btrfs-progs v6.12
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE
leaf 30425088 flags 0x1(WRITTEN) backref revision 1
checksum stored 48f6c57e
checksum calced 48f6c57e
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 3 transid 0 size 0 nbytes 16384
block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0
sequence 0 flags 0x0(none)
atime 1751432947.0 (2025-07-02 14:39:07)
ctime 1751432947.0 (2025-07-02 14:39:07)
mtime 1751432947.0 (2025-07-02 14:39:07)
otime 1751432947.0 (2025-07-02 14:39:07) <<<
The root cause is that fill_inode_item() in tree-log.c is only
populating a/c/m time, not the otime (or btime in statx output).
Part of the reason is that, the vfs inode only has a/c/m time, no native
btime support yet.
[FIX]
Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and
btrfs_inode::i_otime_nsec.
So what we really need is just fill the otime time stamp in
fill_inode_item() of tree-log.c
There is another fill_inode_item() in inode.c, which is doing the proper
otime population.
Fixes: 94edf4ae43a5 ("Btrfs: don't bother committing delayed inode updates when fsyncing")
CC: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1249667750399a48cafcf5945761d39fa584edf upstream.
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 807d9023e75fc20bfd6dd2ac0408ce4af53f1648 upstream.
If the ssd_spread mount option is enabled, then we run the so called
clustered allocator for data block groups. In practice, this results in
creating a btrfs_free_cluster which caches a block_group and borrows its
free extents for allocation.
Since the introduction of allocation size classes in 6.1, there has been
a bug in the interaction between that feature and ssd_spread.
find_free_extent() has a number of nested loops. The loop going over the
allocation stages, stored in ffe_ctl->loop and managed by
find_free_extent_update_loop(), the loop over the raid levels, and the
loop over all the block_groups in a space_info. The size class feature
relies on the block_group loop to ensure it gets a chance to see a
block_group of a given size class. However, the clustered allocator
uses the cached cluster block_group and breaks that loop. Each call to
do_allocation() will really just go back to the same cached block_group.
Normally, this is OK, as the allocation either succeeds and we don't
want to loop any more or it fails, and we clear the cluster and return
its space to the block_group.
But with size classes, the allocation can succeed, then later fail,
outside of do_allocation() due to size class mismatch. That latter
failure is not properly handled due to the highly complex multi loop
logic. The result is a painful loop where we continue to allocate the
same num_bytes from the cluster in a tight loop until it fails and
releases the cluster and lets us try a new block_group. But by then, we
have skipped great swaths of the available block_groups and are likely
to fail to allocate, looping the outer loop. In pathological cases like
the reproducer below, the cached block_group is often the very last one,
in which case we don't perform this tight bg loop but instead rip
through the ffe stages to LOOP_CHUNK_ALLOC and allocate a chunk, which
is now the last one, and we enter the tight inner loop until an
allocation failure. Then allocation succeeds on the final block_group
and if the next allocation is a size mismatch, the exact same thing
happens again.
Triggering this is as easy as mounting with -o ssd_spread and then
running:
mount -o ssd_spread $dev $mnt
dd if=/dev/zero of=$mnt/big bs=16M count=1 &>/dev/null
dd if=/dev/zero of=$mnt/med bs=4M count=1 &>/dev/null
sync
if you do the two writes + sync in a loop, you can force btrfs to spin
an excessive amount on semi-successful clustered allocations, before
ultimately failing and advancing to the stage where we force a chunk
allocation. This results in 2G of data allocated per iteration, despite
only using ~20M of data. By using a small size classed extent, the inner
loop takes longer and we can spin for longer.
The simplest, shortest term fix to unbreak this is to make the clustered
allocator size_class aware in the dumbest way, where it fails on size
class mismatch. This may hinder the operation of the clustered
allocator, but better hindered than completely broken and terribly
overallocating.
Further re-design improvements are also in the works.
Fixes: 52bb7a2166af ("btrfs: introduce size class to block group allocator")
CC: stable@vger.kernel.org # 6.1+
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ebf381a69421a88265d3c49cd0f007ba7336c9d upstream.
During log replay, at add_inode_ref(), we return -ENOENT if our current
inode isn't found on the subvolume tree or if a parent directory isn't
found. The error comes from btrfs_iget_logging() <- btrfs_iget() <-
btrfs_read_locked_inode().
The single caller of add_inode_ref(), replay_one_buffer(), ignores an
-ENOENT error because it expects that error to mean only that a parent
directory wasn't found and that is ok.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during
log replay") we were converting any error when getting a parent directory
to -ENOENT and any error when getting the current inode to -EIO, so our
caller would fail log replay in case we can't find the current inode.
After that commit however in case the current inode is not found we return
-ENOENT to the caller and therefore it ignores the critical fact that the
current inode was not found in the subvolume tree.
Fix this by converting -ENOENT to 0 when we don't find a parent directory,
returning -ENOENT when we don't find the current inode and making the
caller, replay_one_buffer(), not ignore -ENOENT anymore.
Fixes: 5f61b961599a ("btrfs: fix inode lookup error handling during log replay")
CC: stable@vger.kernel.org # 6.16
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reservations
commit e41c75ca3189341e76e6af64b857c05b68a1d7db upstream.
Before waiting for the rescan worker to finish and flushing reservations,
we clear the BTRFS_FS_QUOTA_ENABLED flag from fs_info. If we fail flushing
reservations we leave with the flag not set which is not correct since
quotas are still enabled - we must set back the flag on error paths, such
as when we fail to start a transaction, except for error paths that abort
a transaction. The reservation flushing happens very early before we do
any operation that actually disables quotas and before we start a
transaction, so set back BTRFS_FS_QUOTA_ENABLED if it fails.
Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3061801420469610c8fa6080a950e56770773ef1 upstream.
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62be7afcc13b2727bdc6a4c91aefed6b452e6ecc upstream.
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b115 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a5898c4aac67494c2f0f7fe38373c95c371c930 upstream.
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55f7c65b2f69c7e4cb7aa7c1654a228ccf734fd8 upstream.
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb0752a ("btrfs: zoned: make auto-reclaim less aggressive")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64690a90cd7c6db16d3af8616be1f4bf8d492850 upstream.
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f6c0 ("cdc-acm: Add support of ATOL FPrint fiscal printers")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e61f6ab08786d66a11cfc51e13d6f08a6b06c56 upstream.
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cc1f66cb23cccc704e3def27ad31ed479e934a5 upstream.
The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been
intended to be TBSVC_MATCH_PROTOCOL_REVISION.
Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol")
Cc: stable <stable@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35b6fc51c666fc96355be5cd633ed0fe4ccf68b2 upstream.
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
Cc: stable <stable@kernel.org>
Fixes: 2f3fdcd7ce93 ("staging: comedi: add rw_semaphore to protect against device detachment")
Link: https://lore.kernel.org/all/687bd5fe.a70a0220.693ce.0091.GAE@google.com/
Reported-by: syzbot+01523a0ae5600aef5895@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=01523a0ae5600aef5895
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250722155316.27432-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7616f006db07017ef5d4ae410fca99279aaca7aa upstream.
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 966c5cd72be8989c8a559ddef8e8ff07a37c5eb0 upstream.
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection")
Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf16f408364efd8a68f39011a3b073c83a03612d upstream.
usb_parse_ss_endpoint_companion() checks descriptor type before length,
enabling a potentially odd read outside of the buffer size.
Fix this up by checking the size first before looking at any of the
fields in the descriptor.
Signed-off-by: Xinyu Liu <katieeliu@tencent.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82e6381e23f1ea7a14f418215068aaa2ca046c84 upstream.
Various changes in the "ext4: better scalability for ext4 block
allocation" patch series have resulted in kunit test failures, most
notably in the test_new_blocks_simple and the test_mb_mark_used tests.
The root cause of these failures is that various in-memory ext4 data
structures were not getting initialized, and while previous versions
of the functions exercised by the unit tests didn't use these
structure members, this was arguably a test bug.
Since one of the patches in the block allocation scalability patches
is a fix which is has a cc:stable tag, this commit also has a
cc:stable tag.
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250714130327.1830534-1-libaokun1@huawei.com
Link: https://patch.msgid.link/20250725021550.3177573-1-yi.zhang@huaweicloud.com
Link: https://patch.msgid.link/20250725021654.3188798-1-yi.zhang@huaweicloud.com
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-ext4/b0635ad0-7ebf-4152-a69b-58e7e87d5085@roeck-us.net/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d345aa1fac4c2ec9584fbd6f389f2c2368671d5 upstream.
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c320d8e92925bb7615f83a7b6e3f402a5c2ca63 upstream.
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b42497e3c0e74db061eafad41c0cd7243c46436b upstream.
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range.
Cc: stable@vger.kernel.org
Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping")
Reported-by: syzbot+c2f65e2801743ca64e08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/685af644.a00a0220.2e5631.0094.GAE@google.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://patch.msgid.link/all/1-v1-7b4a16fc390b+10f4-iommufd_alloc_overflow_jgg@nvidia.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b23e09f9997771b4b739c1c694fa832b5fa2de02 upstream.
There are callers that read the unmapped bytes even when rc != 0. Thus, do
not forget to report it in the error path too.
Fixes: 8d40205f6093 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/e2b61303bbc008ba1a4e2d7c2a2894749b59fdac.1752126748.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7fa8520f30373ce99c436c4d57c76befdacbef3 upstream.
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)
------------[ cut here ]------------
!aspace
WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
Modules linked in: ... (long list of modules)
CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_gem_vma_init+0x150/0x18c [msm]
lr : msm_gem_vma_init+0x150/0x18c [msm]
sp : ffff80008144b280
...
Call trace:
msm_gem_vma_init+0x150/0x18c [msm] (P)
get_vma_locked+0xc0/0x194 [msm]
msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
msm_gem_kernel_new+0x48/0x160 [msm]
msm_gpu_init+0x34c/0x53c [msm]
adreno_gpu_init+0x1b0/0x2d8 [msm]
a6xx_gpu_init+0x1e8/0x9e0 [msm]
adreno_bind+0x2b8/0x348 [msm]
component_bind_all+0x100/0x230
msm_drm_bind+0x13c/0x3d0 [msm]
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa4/0x174
component_add+0x14/0x20
dsi_dev_attach+0x20/0x34 [msm]
dsi_host_attach+0x58/0x98 [msm]
devm_mipi_dsi_attach+0x34/0x90
lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
i2c_device_probe+0x148/0x2a8
really_probe+0xbc/0x2c0
__driver_probe_device+0x78/0x120
driver_probe_device+0x3c/0x154
__driver_attach+0x90/0x1a0
bus_for_each_dev+0x68/0xb8
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x68/0x124
i2c_register_driver+0x48/0xcc
lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
do_one_initcall+0x60/0x1d4
do_init_module+0x54/0x1fc
load_module+0x1748/0x1c8c
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x130/0x2f8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x2c/0x80
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
msm_dpu 5e01000.display-controller: failed to load adreno gpu
platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
msm_dpu 5e01000.display-controller: adev bind failed: -22
lt9611uxc 0-002b: failed to attach dsi to host
lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250613173238.15061-1-alexey.klimov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12724ce3fe1a3d8f30d56e48b4f272d8860d1970 upstream.
The iotlb_sync_map iommu ops allows drivers to perform necessary cache
flushes when new mappings are established. For the Intel iommu driver,
this callback specifically serves two purposes:
- To flush caches when a second-stage page table is attached to a device
whose iommu is operating in caching mode (CAP_REG.CM==1).
- To explicitly flush internal write buffers to ensure updates to memory-
resident remapping structures are visible to hardware (CAP_REG.RWBF==1).
However, in scenarios where neither caching mode nor the RWBF flag is
active, the cache_tag_flush_range_np() helper, which is called in the
iotlb_sync_map path, effectively becomes a no-op.
Despite being a no-op, cache_tag_flush_range_np() involves iterating
through all cache tags of the iommu's attached to the domain, protected
by a spinlock. This unnecessary execution path introduces overhead,
leading to a measurable I/O performance regression. On systems with NVMes
under the same bridge, performance was observed to drop from approximately
~6150 MiB/s down to ~4985 MiB/s.
Introduce a flag in the dmar_domain structure. This flag will only be set
when iotlb_sync_map is required (i.e., when CM or RWBF is set). The
cache_tag_flush_range_np() is called only for domains where this flag is
set. This flag, once set, is immutable, given that there won't be mixed
configurations in real-world scenarios where some IOMMUs in a system
operate in caching mode while others do not. Theoretically, the
immutability of this flag does not impact functionality.
Reported-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2115738
Link: https://lore.kernel.org/r/20250701171154.52435-1-ioanna-maria.alifieraki@canonical.com
Fixes: 129dab6e1286 ("iommu/vt-d: Use cache_tag_flush_range_np() in iotlb_sync_map")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250703031545.3378602-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250714045028.958850-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d5eff7821f6d70f7d1b4d8a60680fba4de868a7 upstream.
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0acf9e65a47d1e489c8b24c45a64436e30bcccf4 upstream.
On SM8750 the setting rate of pixel and byte clocks, while the parent
DSI PHY PLL, fails with:
disp_cc_mdss_byte0_clk_src: rcg didn't update its configuration.
DSI PHY PLL has to be unprepared and its "PLL Power Down" bits in
CMN_CTRL_0 asserted.
Mark these clocks with CLK_OPS_PARENT_ENABLE to ensure the parent is
enabled during rate changes.
Cc: stable@vger.kernel.org
Fixes: f1080d8dab0f ("clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250520090741.45820-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 077ec7bcec9a8987d2a133afb7e13011878c7576 upstream.
With the conversion done by commit e88f03230dc0 ("clk: qcom: gcc-ipq8074:
rework nss_port5/6 clock to multiple conf") a Copy-Paste error was made
for the nss_port6_tx_clk_src frequency table.
This was caused by the wrong setting of the parent in
ftbl_nss_port6_tx_clk_src that was wrongly set to P_UNIPHY1_RX instead
of P_UNIPHY2_TX.
This cause the UNIPHY2 port to malfunction when it needs to be scaled to
higher clock. The malfunction was observed with the example scenario
with an Aquantia 10G PHY connected and a speed higher than 1G (example
2.5G)
Fix the broken frequency table to restore original functionality.
Cc: stable@vger.kernel.org
Fixes: e88f03230dc0 ("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20250522202600.4028-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2df7168717b7d2d32bcf017c68be16e4aae9dd13 upstream.
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f70291411ba20d50008db90a6f0731efac27872c upstream.
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 579bd5006fe7f4a7abb32da0160d376476cab67d upstream.
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com
Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ed1165c37277822b519f519d0982d36efc30006 upstream.
Patch series "mm/damon: fix misc bugs in DAMON modules".
From manual code review, I found below bugs in DAMON modules.
DAMON sample modules crash if those are enabled at boot time, via kernel
command line. A similar issue was found and fixed on DAMON non-sample
modules in the past, but we didn't check that for sample modules.
DAMON non-sample modules are not setting 'enabled' parameters accordingly
when real enabling is failed. Honggyu found and fixed[1] this type of
bugs in DAMON sample modules, and my inspection was motivated by the great
work. Kudos to Honggyu.
Finally, DAMON_RECLIAM is mistakenly losing scheme internal status due to
misuse of damon_commit_ctx(). DAMON_LRU_SORT has a similar misuse, but
fortunately it is not causing real status loss.
Fix the bugs. Since these are similar patterns of bugs that were found in
the past, it would be better to add tests or refactor the code, in future.
This patch (of 6):
If 'enable' parameter of the 'wsse' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250706193207.39810-2-sj@kernel.org
Link: https://lore.kernel.org/20250702000205.1921-1-honggyu.kim@sk.com [1]
Fixes: b757c6cfc696 ("samples/damon/wsse: start and stop DAMON as the user requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abbf9a44944171ca99c150adad9361a2f517d3b6 upstream.
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/rust-for-linux/36cdc798-524f-4910-8b77-d7b9fac08d77@oss.qualcomm.com/
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250727092317.2930617-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 252fea131e15aba2cd487119d1a8f546471199e2 upstream.
`rustdoc` can get confused when generating documentation into a folder
that contains generated files from other `rustdoc` versions.
For instance, running something like:
rustup default 1.78.0
make LLVM=1 rustdoc
rustup default 1.88.0
make LLVM=1 rustdoc
may generate errors like:
error: couldn't generate documentation: invalid template: last line expected to start with a comment
|
= note: failed to create or modify "./Documentation/output/rust/rustdoc/src-files.js"
Thus just always clean the output folder before generating the
documentation -- we are anyway regenerating it every time the `rustdoc`
target gets called, at least for the time being.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Daniel Almeida <daniel.almeida@collabora.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/527201113
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://lore.kernel.org/r/20250726133435.2460085-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 040bc6d0e0e9c814c9c663f6f1544ebaff6824a8 ]
It should use vm flags instead of pte flags
to specify bo vm attributes.
Fixes: 7946340fa389 ("drm/amdgpu: Move csa related code to separate file")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b08425fa77ad2f305fe57a33dceb456be03b653f)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10ef476aad1c848449934e7bec2ab2374333c7b6 ]
The vram block allocation flag must be cleared
before making vram reservation, otherwise reserving
addresses within the currently freed memory range
will always fail.
Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d38eaf27de1b8584f42d6fb3f717b7ec44b3a7a1)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 184889dfe0568528fd6d14bba864dd57ed45bbf2 ]
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877bb ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
(cherry picked from commit 46fb38cb20c0d185a6391ab524b23e0e0219c41f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b63335fb3d32579c5ff0b7038b9cc23688fff528 ]
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
