| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Remove nvram ABI. There was no complaints about the deprecation for
the last 3 years.
- Improve RTC device allocation and registration
- Now available for ARCH=um
Drivers:
- at91rm9200: correction and sam9x60 support
- ds1307: improve ACPI support
- mxc: now DT only
- pcf2127: watchdog support now needs the reset-source property
- pcf8523: set range
- rx6110: i2c support"
* tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits)
rtc: pcf2127: only use watchdog when explicitly available
dt-bindings: rtc: add reset-source property
rtc: fix RTC removal
rtc: s3c: Remove dead code related to periodic tick handling
rtc: s3c: Disable all enable (RTC, tick) bits in the probe
rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time
rtc: test: remove debug message
rtc: mxc{,_v2}: enable COMPILE_TEST
rtc: enable RTC framework on ARCH=um
rtc: pcf8523: use BIT
rtc: pcf8523: set range
rtc: pcf8523: switch to devm_rtc_allocate_device
rtc: destroy mutex when releasing the device
rtc: shrink devm_rtc_allocate_device()
rtc: rework rtc_register_device() resource management
rtc: nvmem: emit an error message when nvmem registration fails
rtc: add devm_ prefix to rtc_nvmem_register()
rtc: nvmem: remove nvram ABI
Documentation: list RTC devres helpers in devres.rst
rtc: omap: use devm_pinctrl_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Don't wait for unfreeze of the wrong filesystems
- Remove an obsolete delete_work_func hack and an incorrect
sb_start_write
- Minor documentation updates and cosmetic care
* tag 'gfs2-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: in signal_our_withdraw wait for unfreeze of _this_ fs only
gfs2: Remove sb_start_write from gfs2_statfs_sync
gfs2: remove trailing semicolons from macro definitions
Revert "GFS2: Prevent delete work from occurring on glocks used for create"
gfs2: Make inode operations static
MAINTAINERS: Add gfs2 bug tracker link
Documentation: Update filesystems/gfs2.rst
|
|
Commit b0a0c2615f6f ("epoll: wire up syscall epoll_pwait2") wired up
the 64 bit syscall instead of the compat variant in a couple of places.
Fixes: b0a0c2615f6f ("epoll: wire up syscall epoll_pwait2")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range fix from Christian Brauner:
"syzbot reported a bug when asking close_range() to unshare the file
descriptor table and making all fds close-on-exec.
If CLOSE_RANGE_UNSHARE the caller will receive a private file
descriptor table in case their file descriptor table is currently
shared before operating on the requested file descriptor range.
For the case where the caller has requested all file descriptors to be
actually closed via e.g. close_range(3, ~0U, CLOSE_RANGE_UNSHARE) the
kernel knows that the caller does not need any of the file descriptors
anymore and will optimize the close operation by only copying all
files in the range from 0 to 3 and no others.
However, if the caller requested CLOSE_RANGE_CLOEXEC together with
CLOSE_RANGE_UNSHARE the caller wants to still make use of the file
descriptors so the kernel needs to copy all of them and can't
optimize.
The original patch didn't account for this and thus could cause oopses
as evidenced by the syzbot report because it assumed that all fds had
been copied. Fix this by handling the CLOSE_RANGE_CLOEXEC case and
copying all fds if the two flags are specified together.
This should've been caught in the selftests but the original patch
didn't cover this case and I didn't catch it during review. So in
addition to the bugfix I'm also adding selftests. They will reliably
reproduce the bug on a non-fixed kernel and allows us to catch
regressions and verify correct behavior.
Note, the kernel selftest tree contained a bunch of changes that made
the original selftest fail to compile so there are small fixups in
here make them compile without warnings"
* tag 'close-range-cloexec-unshare-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/core: add regression test for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
selftests/core: add test for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
selftests/core: handle missing syscall number for close_range
selftests/core: fix close_range_test build after XFAIL removal
close_range: unshare all fds for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Some minor cleanup patches and a small series disentangling some Xen
related Kconfig options"
* tag 'for-linus-5.11-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Kconfig: remove X86_64 depends from XEN_512GB
xen/manage: Fix fall-through warnings for Clang
xen-blkfront: Fix fall-through warnings for Clang
xen: remove trailing semicolon in macro definition
xen: Kconfig: nest Xen guest options
xen: Remove Xen PVH/PVHVM dependency on PCI
x86/xen: Convert to DEFINE_SHOW_ATTRIBUTE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia updates from Dominik Brodowski:
"Besides a few PCMCIA odd fixes, the NEC VRC4173 CARDU driver is
removed, as it has not compiled in ages"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: omap: Fix error return code in omap_cf_probe()
pcmcia: Remove NEC VRC4173 CARDU
pcmcia: db1xxx_ss: remove unneeded semicolon
pcmcia/electra_cf: Fix some return values in 'electra_cf_probe()' in case of error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Add the HCI driver
- Add a missing destroy_workqueue() in an error path
- Flag Alexandre Belloni as the new maintainer
* tag 'i3c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning
i3c: Resign from my maintainer role
i3c/master: Fix uninitialized variable next_addr
i3c/master: introduce the mipi-i3c-hci driver
dt-bindings: i3c: MIPI I3C Host Controller Interface
i3c master: fix missing destroy_workqueue() on error in i3c_master_register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- collie_battery, generic-adc-battery, s3c-adc-battery: convert to
GPIO descriptors (incl ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for force disabling a regulator
- use printk format symbol resolver
- ocelot: add support for Luton and Jaguar2"
* tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits)
power: supply: Fix a typo in warning message
Documentation: DT: binding documentation for regulator-poweroff
power: reset: new driver regulator-poweroff
power: supply: ab8500: Use dev_err_probe() for IIO channels
power: supply: ab8500_fg: Request all IRQs as threaded
power: supply: ab8500_charger: Oneshot threaded IRQs
power: supply: ab8500: Convert to dev_pm_ops
power: supply: ab8500: Use local helper
power: supply: wm831x_power: remove unneeded break
power: supply: bq24735: Drop unused include
power: supply: bq24190_charger: Drop unused include
power: supply: generic-adc-battery: Use GPIO descriptors
power: supply: collie_battery: Convert to GPIO descriptors
power: supply: bq24190_charger: fix reference leak
power: supply: s3c-adc-battery: Convert to GPIO descriptors
power: reset: Use printk format symbol resolver
power: supply: axp20x_usb_power: Use power efficient workqueue for debounce
power: supply: axp20x_usb_power: fix typo
power: supply: max8997-charger: Improve getting charger status
power: supply: max8997-charger: Fix platform data retrieval
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
"Misc cleanups"
* tag 'hsi-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: core: fix a kernel-doc markup
HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This is a fairly big release cycle from the PWM framework's point of
view.
There's a large patcheset here which converts drivers to use the new
devm_platform_ioremap_resource() helper and a bunch of minor fixes to
existing drivers. Some of the existing drivers also add support for
more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.
Finally there's a couple of new drivers for Intel Keem Bay and LGM
SoCs as well as the DesignWare PWM controller"
* tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits)
pwm: sun4i: Remove erroneous else branch
pwm: sl28cpld: Set driver data before registering the PWM chip
pwm: Remove unused function pwmchip_add_inversed()
pwm: imx27: Fix overflow for bigger periods
pwm: bcm2835: Support apply function for atomic configuration
pwm: keembay: Fix build failure with -Os
pwm: core: Use octal permission
pwm: lpss: Make compilable with COMPILE_TEST
pwm: Fix dependencies on HAS_IOMEM
pwm: Use -EINVAL for unsupported polarity
pwm: sti: Remove unnecessary blank line
pwm: sti: Avoid conditional gotos
pwm: Add PWM fan controller driver for LGM SoC
Add DT bindings YAML schema for PWM fan controller of LGM SoC
pwm: Add DesignWare PWM Controller Driver
dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
pwm: mediatek: Add MT8183 SoC support
pwm: mediatek: Always use bus clock
dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
pwm: Add PWM driver for Intel Keem Bay
...
|
|
Merge still more updates from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (memcg and cleanups) and
epoll"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/Kconfig: fix spelling mistake "whats" -> "what's"
selftests/filesystems: expand epoll with epoll_pwait2
epoll: wire up syscall epoll_pwait2
epoll: add syscall epoll_pwait2
epoll: convert internal api to timespec64
epoll: eliminate unnecessary lock for zero timeout
epoll: replace gotos with a proper loop
epoll: pull all code between fetch_events and send_event into the loop
epoll: simplify and optimize busy loop logic
epoll: move eavail next to the list_empty_careful check
epoll: pull fatal signal checks into ep_send_events()
epoll: simplify signal handling
epoll: check for events when removing a timed out thread from the wait queue
mm/memcontrol:rewrite mem_cgroup_page_lruvec()
mm, kvm: account kvm_vcpu_mmap to kmemcg
mm/memcg: remove unused definitions
mm/memcg: warning on !memcg after readahead page charged
mm/memcg: bail early from swap accounting if memcg disabled
|
|
There is a spelling mistake in the Kconfig help text. Fix it.
Link: https://lkml.kernel.org/r/20201217172717.58203-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Code coverage for the epoll_pwait2 syscall.
epoll62: Repeat basic test epoll1, but exercising the new syscall.
epoll63: Pass a timespec and exercise the timeout wakeup path.
Link: https://lkml.kernel.org/r/20201121144401.3727659-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add syscall epoll_pwait2, an epoll_wait variant with nsec resolution that
replaces int timeout with struct timespec. It is equivalent otherwise.
int epoll_pwait2(int fd, struct epoll_event *events,
int maxevents,
const struct timespec *timeout,
const sigset_t *sigset);
The underlying hrtimer is already programmed with nsec resolution.
pselect and ppoll also set nsec resolution timeout with timespec.
The sigset_t in epoll_pwait has a compat variant. epoll_pwait2 needs
the same.
For timespec, only support this new interface on 2038 aware platforms
that define __kernel_timespec_t. So no CONFIG_COMPAT_32BIT_TIME.
Link: https://lkml.kernel.org/r/20201121144401.3727659-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "add epoll_pwait2 syscall", v4.
Enable nanosecond timeouts for epoll.
Analogous to pselect and ppoll, introduce an epoll_wait syscall
variant that takes a struct timespec instead of int timeout.
This patch (of 4):
Make epoll more consistent with select/poll: pass along the timeout as
timespec64 pointer.
In anticipation of additional changes affecting all three polling
mechanisms:
- add epoll_pwait2 syscall with timespec semantics,
and share poll_select_set_timeout implementation.
- compute slack before conversion to absolute time,
to save one ktime_get_ts64 call.
Link: https://lkml.kernel.org/r/20201121144401.3727659-1-willemdebruijn.kernel@gmail.com
Link: https://lkml.kernel.org/r/20201121144401.3727659-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We call ep_events_available() under lock when timeout is 0, and then call
it without locks in the loop for the other cases.
Instead, call ep_events_available() without lock for all cases. For
non-zero timeouts, we will recheck after adding the thread to the wait
queue. For zero timeout cases, by definition, user is opportunistically
polling and will have to call epoll_wait again in the future.
Note that this lock was kept in c5a282e9635e9 because the whole loop was
historically under lock.
This patch results in a 1% CPU/RPC reduction in RPC benchmarks.
Link: https://lkml.kernel.org/r/20201106231635.3528496-9-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The existing loop is pointless, and the labels make it really hard to
follow the structure.
Replace that control structure with a simple loop that returns when there
are new events, there is a signal, or the thread has timed out.
Link: https://lkml.kernel.org/r/20201106231635.3528496-8-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a no-op change which simplifies the follow up patches.
Link: https://lkml.kernel.org/r/20201106231635.3528496-7-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ep_events_available() is called multiple times around the busy loop logic,
even though the logic is generally not used. ep_reset_busy_poll_napi_id()
is similarly always called, even when busy loop is not used.
Eliminate ep_reset_busy_poll_napi_id() and inline it inside
ep_busy_loop(). Make ep_busy_loop() return whether there are any events
available after the busy loop. This will eliminate unnecessary loads and
branches, and simplifies the loop.
Link: https://lkml.kernel.org/r/20201106231635.3528496-6-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a no-op change and simply to make the code more coherent.
Link: https://lkml.kernel.org/r/20201106231635.3528496-5-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To simplify the code, pull in checking the fatal signals into
ep_send_events(). ep_send_events() is called only from ep_poll().
Note that, previously, we were always checking fatal events, but it is
checked only if eavail is true. This should be fine because the goal of
that check is to quickly return from epoll_wait() when there is a pending
fatal signal.
Link: https://lkml.kernel.org/r/20201106231635.3528496-4-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check signals before locking ep->lock, and immediately return -EINTR if
there is any signal pending.
This saves a few loads, stores, and branches from the hot path and
simplifies the loop structure for follow up patches.
Link: https://lkml.kernel.org/r/20201106231635.3528496-3-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "simplify ep_poll".
This patch series is a followup based on the suggestions and feedback by
Linus:
https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com
The first patch in the series is a fix for the epoll race in presence of
timeouts, so that it can be cleanly backported to all affected stable
kernels.
The rest of the patch series simplify the ep_poll() implementation. Some
of these simplifications result in minor performance enhancements as well.
We have kept these changes under self tests and internal benchmarks for a
few days, and there are minor (1-2%) performance enhancements as a result.
This patch (of 8):
After abc610e01c66 ("fs/epoll: avoid barrier after an epoll_wait(2)
timeout"), we break out of the ep_poll loop upon timeout, without checking
whether there is any new events available. Prior to that patch-series we
always called ep_events_available() after exiting the loop.
This can cause races and missed wakeups. For example, consider the
following scenario reported by Guantao Liu:
Suppose we have an eventfd added using EPOLLET to an epollfd.
Thread 1: Sleeps for just below 5ms and then writes to an eventfd.
Thread 2: Calls epoll_wait with a timeout of 5 ms. If it sees an
event of the eventfd, it will write back on that fd.
Thread 3: Calls epoll_wait with a negative timeout.
Prior to abc610e01c66, it is guaranteed that Thread 3 will wake up either
by Thread 1 or Thread 2. After abc610e01c66, Thread 3 can be blocked
indefinitely if Thread 2 sees a timeout right before the write to the
eventfd by Thread 1. Thread 2 will be woken up from
schedule_hrtimeout_range and, with evail 0, it will not call
ep_send_events().
To fix this issue:
1) Simplify the timed_out case as suggested by Linus.
2) while holding the lock, recheck whether the thread was woken up
after its time out has reached.
Note that (2) is different from Linus' original suggestion: It do not set
"eavail = ep_events_available(ep)" to avoid unnecessary contention (when
there are too many timed-out threads and a small number of events), as
well as races mentioned in the discussion thread.
This is the first patch in the series so that the backport to stable
releases is straightforward.
Link: https://lkml.kernel.org/r/20201106231635.3528496-1-soheil.kdev@gmail.com
Link: https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com
Link: https://lkml.kernel.org/r/20201106231635.3528496-2-soheil.kdev@gmail.com
Fixes: abc610e01c66 ("fs/epoll: avoid barrier after an epoll_wait(2) timeout")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Guantao Liu <guantaol@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Guantao Liu <guantaol@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem_cgroup_page_lruvec() in memcontrol.c and mem_cgroup_lruvec() in
memcontrol.h is very similar except for the param(page and memcg) which
also can be convert to each other.
So rewrite mem_cgroup_page_lruvec() with mem_cgroup_lruvec().
[alex.shi@linux.alibaba.com: add missed warning in mem_cgroup_lruvec]
Link: https://lkml.kernel.org/r/94f17bb7-ec61-5b72-3555-fabeb5a4d73b@linux.alibaba.com
[lstoakes@gmail.com: warn on missing memcg on mem_cgroup_page_lruvec()]
Link: https://lkml.kernel.org/r/20201125112202.387009-1-lstoakes@gmail.com
Link: https://lkml.kernel.org/r/20201108143731.GA74138@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A VCPU of a VM can allocate couple of pages which can be mmap'ed by the
user space application. At the moment this memory is not charged to the
memcg of the VMM. On a large machine running large number of VMs or
small number of VMs having large number of VCPUs, this unaccounted
memory can be very significant. So, charge this memory to the memcg of
the VMM. Please note that lifetime of these allocations corresponds to
the lifetime of the VMM.
Link: https://lkml.kernel.org/r/20201106202923.2087414-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some definitions are left unused, just clean them.
Link: https://lkml.kernel.org/r/20201108003834.12669-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add VM_WARN_ON_ONCE_PAGE() macro.
Since readahead page is charged on memcg too, in theory we don't have to
check this exception now. Before safely remove them all, add a warning
for the unexpected !memcg.
Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "bail out early for memcg disable".
These 2 patches are indepenedent from per memcg lru lock, and may
encounter unexpected warning, so let's move out them from per memcg
lru locking patchset.
This patch (of 2):
We could bail out early when memcg wasn't enabled.
Link: https://lkml.kernel.org/r/1604283436-18880-1-git-send-email-alex.shi@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604283436-18880-2-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CLOSE_RANGE_CLOEXEC
This test is a minimalized version of the reproducer given by syzbot
(cf. [1]).
After introducing CLOSE_RANGE_CLOEXEC syzbot reported a crash when
CLOSE_RANGE_CLOEXEC is specified in conjunction with
CLOSE_RANGE_UNSHARE. When CLOSE_RANGE_UNSHARE is specified the caller
will receive a private file descriptor table in case their file
descriptor table is currently shared.
For the case where the caller has requested all file descriptors to be
actually closed via e.g. close_range(3, ~0U, 0) the kernel knows that
the caller does not need any of the file descriptors anymore and will
optimize the close operation by only copying all files in the range from
0 to 3 and no others.
However, if the caller requested CLOSE_RANGE_CLOEXEC together with
CLOSE_RANGE_UNSHARE the caller wants to still make use of the file
descriptors so the kernel needs to copy all of them and can't optimize.
The original patch didn't account for this and thus could cause oopses
as evidenced by the syzbot report. Add tests for this regression.
We first create a huge gap in the fd table. When we now call
CLOSE_RANGE_UNSHARE with a shared fd table and and with ~0U as upper
bound the kernel will only copy up to fd1 file descriptors into the new
fd table. If the kernel is buggy and doesn't handle CLOSE_RANGE_CLOEXEC
correctly it will not have copied all file descriptors and we will oops!
This test passes on a fixed kernel and will trigger an oops on a buggy
kernel.
[1]: https://syzkaller.appspot.com/text?tag=KernelConfig&x=db720fe37a6a41d8
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201218145415.801063-4-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add a test to verify that CLOSE_RANGE_UNSHARE works correctly when combined
with CLOSE_RANGE_CLOEXEC for the single-threaded case.
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20201218145415.801063-3-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
This improves the syscall number handling in the close_range()
selftests. This should handle any architecture.
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20201218145415.801063-2-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
XFAIL was removed in commit 9847d24af95c ("selftests/harness: Refactor
XFAIL into SKIP") and its use in close_range_test was already replaced
by commit 1d44d0dd61b6 ("selftests: core: use SKIP instead of XFAIL in
close_range_test.c"). However, commit 23afeaeff3d9 ("selftests: core:
add tests for CLOSE_RANGE_CLOEXEC") introduced usage of XFAIL in
TEST(close_range_cloexec). Use SKIP there as well.
Fixes: 23afeaeff3d9 ("selftests: core: add tests for CLOSE_RANGE_CLOEXEC")
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20201218112428.13662-1-tklauser@distanz.ch
Link: https://lore.kernel.org/r/20201218145415.801063-1-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
After introducing CLOSE_RANGE_CLOEXEC syzbot reported a crash when
CLOSE_RANGE_CLOEXEC is specified in conjunction with CLOSE_RANGE_UNSHARE.
When CLOSE_RANGE_UNSHARE is specified the caller will receive a private
file descriptor table in case their file descriptor table is currently
shared.
For the case where the caller has requested all file descriptors to be
actually closed via e.g. close_range(3, ~0U, 0) the kernel knows that
the caller does not need any of the file descriptors anymore and will
optimize the close operation by only copying all files in the range from
0 to 3 and no others.
However, if the caller requested CLOSE_RANGE_CLOEXEC together with
CLOSE_RANGE_UNSHARE the caller wants to still make use of the file
descriptors so the kernel needs to copy all of them and can't optimize.
The original patch didn't account for this and thus could cause oopses
as evidenced by the syzbot report because it assumed that all fds had
been copied. Fix this by handling the CLOSE_RANGE_CLOEXEC case.
syzbot reported
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: null-ptr-deref in atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
BUG: KASAN: null-ptr-deref in atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
BUG: KASAN: null-ptr-deref in filp_close+0x22/0x170 fs/open.c:1274
Read of size 8 at addr 0000000000000077 by task syz-executor511/8522
CPU: 1 PID: 8522 Comm: syz-executor511 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
__kasan_report mm/kasan/report.c:549 [inline]
kasan_report.cold+0x5/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
filp_close+0x22/0x170 fs/open.c:1274
close_files fs/file.c:402 [inline]
put_files_struct fs/file.c:417 [inline]
put_files_struct+0x1cc/0x350 fs/file.c:414
exit_files+0x12a/0x170 fs/file.c:435
do_exit+0xb4f/0x2a00 kernel/exit.c:818
do_group_exit+0x125/0x310 kernel/exit.c:920
get_signal+0x428/0x2100 kernel/signal.c:2792
arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x124/0x200 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x447039
Code: Unable to access opcode bytes at RIP 0x44700f.
RSP: 002b:00007f1b1225cdb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000006dbc28 RCX: 0000000000447039
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000006dbc2c
RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 00007fff223b6bef R14: 00007f1b1225d9c0 R15: 00000000006dbc2c
==================================================================
syzbot has tested the proposed patch and the reproducer did not trigger any issue:
Reported-and-tested-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Tested on:
commit: 10f7cddd selftests/core: add regression test for CLOSE_RAN..
git tree: git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git vfs
kernel config: https://syzkaller.appspot.com/x/.config?x=5d42216b510180e3
dashboard link: https://syzkaller.appspot.com/bug?extid=96cfd2b22b3213646a93
compiler: gcc (GCC) 10.1.0-syz 20200507
Reported-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Fixes: 582f1fb6b721 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20201217213303.722643-1-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
commit bfda93aee0ec ("xen: Kconfig: nest Xen guest options")
accidentally re-added X86_64 as a dependency to XEN_512GB. It was
originally removed in commit a13f2ef168cb ("x86/xen: remove 32-bit Xen
PV guest support"). Remove it again.
Fixes: bfda93aee0ec ("xen: Kconfig: nest Xen guest options")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20201216140838.16085-1-jandryuk@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Most boards using the pcf2127 chip (in my bubble) don't make use of the
watchdog functionality and the respective output is not connected. The
effect on such a board is that there is a watchdog device provided that
doesn't work.
So only register the watchdog if the device tree has a "reset-source"
property.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[RV: s/has-watchdog/reset-source/]
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201218101054.25416-3-rasmus.villemoes@prevas.dk
|
|
Some RTCs, e.g. the pcf2127, can be used as a hardware watchdog. But
if the reset pin is not actually wired up, the driver exposes a
watchdog device that doesn't actually work.
Provide a standard binding that can be used to indicate that a given
RTC can perform a reset of the machine, similar to wakeup-source.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201218101054.25416-2-rasmus.villemoes@prevas.dk
|
|
If iter->count is 0 and iocb->ki_pos is page aligned, this causes
nr_pages to be 0.
Then in generic_file_buffered_read_get_pages() find_get_pages_contig()
returns 0 - because we asked for 0 pages, so we call
generic_file_buffered_read_no_cached_page() which attempts to add a page
to the page cache, which fails with -EEXIST, and then we loop. Oops...
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs updates from Darrick Wong:
"In this release we add the ability to set a 'needsrepair' flag
indicating that we /know/ the filesystem requires xfs_repair, but
other than that, it's the usual strengthening of metadata validation
and miscellaneous cleanups.
Summary:
- Introduce a "needsrepair" "feature" to flag a filesystem as needing
a pass through xfs_repair. This is key to enabling filesystem
upgrades (in xfs_db) that require xfs_repair to make minor
adjustments to metadata.
- Refactor parameter checking of recovered log intent items so that
we actually use the same validation code as them that generate the
intent items.
- Various fixes to online scrub not reacting correctly to directory
entries pointing to inodes that cannot be igetted.
- Refactor validation helpers for data and rt volume extents.
- Refactor XFS_TRANS_DQ_DIRTY out of existence.
- Fix a longstanding bug where mounting with "uqnoenforce" would
start user quotas in non-enforcing mode but /proc/mounts would
display "usrquota", implying that they are being enforced.
- Don't flag dax+reflink inodes as corruption since that is a valid
(but not fully functional) combination right now.
- Clean up raid stripe validation functions.
- Refactor the inode allocation code to be more straightforward.
- Small prep cleanup for idmapping support.
- Get rid of the xfs_buf_t typedef"
* tag 'xfs-5.11-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
xfs: remove xfs_buf_t typedef
fs/xfs: convert comma to semicolon
xfs: open code updating i_mode in xfs_set_acl
xfs: remove xfs_vn_setattr_nonsize
xfs: kill ialloced in xfs_dialloc()
xfs: spilt xfs_dialloc() into 2 functions
xfs: move xfs_dialloc_roll() into xfs_dialloc()
xfs: move on-disk inode allocation out of xfs_ialloc()
xfs: introduce xfs_dialloc_roll()
xfs: convert noroom, okalloc in xfs_dialloc() to bool
xfs: don't catch dax+reflink inodes as corruption in verifier
xfs: fix the forward progress assertion in xfs_iwalk_run_callbacks
xfs: remove unneeded return value check for *init_cursor()
xfs: introduce xfs_validate_stripe_geometry()
xfs: show the proper user quota options
xfs: remove the unused XFS_B_FSB_OFFSET macro
xfs: remove unnecessary null check in xfs_generic_create
xfs: directly return if the delta equal to zero
xfs: check tp->t_dqinfo value instead of the XFS_TRANS_DQ_DIRTY flag
xfs: delete duplicated tp->t_dqinfo null check and allocation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"No new features. Just a couple of fixes that I had in my local
repository that fixed issues with sending the result emails"
* tag 'ktest-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix the logic for truncating the size of the log file for email
ktest.pl: If size of log is too big to email, email error message
|
|
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixlet from Daniel Lezcano:
"A trivial change which fell through the cracks:
Add Alder Lake support ACPI ids (Srinivas Pandruvada)"
* tag 'thermal-v5.11-2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: int340x: Support Alder Lake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"This is mainly to decouple udelay() and arch_cpu_idle() and simplify
both of them.
Summary:
- Always initialize kernel stack backchain when entering the kernel,
so that unwinding works properly.
- Fix stack unwinder test case to avoid rare interrupt stack
corruption.
- Simplify udelay() and just let it busy loop instead of implementing
a complex logic.
- arch_cpu_idle() cleanup.
- Some other minor improvements"
* tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: convert comma to semicolon
s390/idle: allow arch_cpu_idle() to be kprobed
s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle()
s390/idle: merge enabled_wait() and arch_cpu_idle()
s390/delay: remove udelay_simple()
s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
s390/delay: simplify udelay
s390/test_unwind: use timer instead of udelay
s390/test_unwind: fix CALL_ON_STACK tests
s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced
s390: always clear kernel stack backchain before calling functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"These are some some trivial updates that mostly fix/clean-up code
pushed during the merging window:
- Work around broken GCC 4.9 handling of "S" asm constraint
- Suppress W=1 missing prototype warnings
- Warn the user when a small VA_BITS value cannot map the available
memory
- Drop the useless update to per-cpu cycles"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Work around broken GCC 4.9 handling of "S" constraint
arm64: Warn the user when a small VA_BITS value wastes memory
arm64: entry: suppress W=1 prototype warnings
arm64: topology: Drop the useless update to per-cpu cycles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for the merge window
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh2bp34m.fsf@intel.com
|
|
That seems to be unused.
Daniel: Mike reported a warning when booting with qxl, which this
patch fixes:
[ 1.815561] WARNING: CPU: 7 PID: 355 at drivers/gpu/drm/ttm/ttm_pool.c:365 ttm_pool_alloc+0x41b/0x540 [ttm]
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
References: https://lore.kernel.org/lkml/7cb43d5b-4e6a-defc-1ab6-5f713ad5a963@amd.com/
Reviewed-by: David Airlie <airlied@redhat.com>
[davnet: bring commit message up to par.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218134243.110884-1-christian.koenig@amd.com
|
|
As per the radeon/amdgpu fix don't use multihop if hw moves
aren't enabled.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Fixes: 0c8c0659d747 ("drm/nouveau/ttm: use multihop")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217200943.30511-1-airlied@gmail.com
|
|
Fix TGL REVID macros to fetch correct display/gt stepping based
on SOC rev id from INTEL_REVID() macro. Previously, we were just
returning the first element of the revid array instead of using
the correct index based on SOC rev id.
Fixes: c33298cb34f5 ("drm/i915/tgl: Fix stepping WA matching")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-1-aditya.swarup@intel.com
(cherry picked from commit 83dbd74f8243f020d1ad8a3a3b3cd0795067920e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When inserting a VMA, we restrict the placement to the low 4G unless the
caller opts into using the full range. This was done to allow usersapce
the opportunity to transition slowly from a 32b address space, and to
avoid breaking inherent 32b assumptions of some commands.
However, for insert we limited ourselves to 4G-4K, but on verification
we allowed the full 4G. This causes some attempts to bind a new buffer
to sporadically fail with -ENOSPC, but at other times be bound
successfully.
commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1
page") suggests that there is a genuine problem with stateless addressing
that cannot utilize the last page in 4G and so we purposefully excluded
it. This means that the quick pin pass may cause us to utilize a buggy
placement.
Reported-by: CQ Tang <cq.tang@intel.com>
Testcase: igt/gem_exec_params/larger-than-life-batch
Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: CQ Tang <cq.tang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk
(cherry picked from commit 5f22cc0b134ab702d7f64b714e26018f7288ffee)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
