summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-04-28mac80211: avoid calling useless channel context codeZhao, Gang1-9/+9
ieee80211_assign_chanctx() checks if local->use_chanctx is true, so the two code block related to ieee80211_assign_chanctx() can be moved into above if clause, emphasize that these code are executed only if local->use_chanctx is true. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: Use 5MHz bandwidth by default when checking usable channelsRostislav Lisovy1-7/+15
Current code checks if the 20MHz bandwidth is allowed for particular channel -- if it is not, the channel is disabled. Since we need to use 5/10 MHz channels, this code is modified in the way that the default bandwidth to check is 5MHz. If the maximum bandwidth allowed by the channel is smaller than 5MHz, the channel is disabled. Otherwise the channel is used and the flags are set according to the bandwidth allowed by the channel. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: Add attributes describing prohibited channel bandwidthRostislav Lisovy4-0/+27
Since there are frequency bands (e.g. 5.9GHz) allowing channels with only 10 or 5 MHz bandwidth, this patch adds attributes that allow keeping track about this information. When channel attributes are reported to user-space, make sure to not break old tools, i.e. if the 'split wiphy dump' is enabled, report the extra attributes (if present) describing the bandwidth restrictions. If the 'split wiphy dump' is not enabled, completely omit those channels that have flags set to either IEEE80211_CHAN_NO_10MHZ or IEEE80211_CHAN_NO_20MHZ. Add the check for new bandwidth restriction flags in cfg80211_chandef_usable() to comply with the restrictions. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: change return value of notifier functionZhao, Gang3-9/+8
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change return value of notifier functionZhao, Gang2-2/+4
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang12-117/+118
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change registered device pointer nameZhao, Gang3-196/+196
Name "dev" is too common and ambiguous, let all the pointer name pointing to struct cfg80211_registered_device be "rdev". This can improve code readability and consistency(since other places have already called it rdev). Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: remove unnecessary BUG_ON()Zhao, Gang1-2/+1
The BUG_ON(!err) can't be triggered in the code path, so remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: return bool instead of numbers in yes/no functionZhao, Gang1-9/+10
And some code style changes in the function, and correct a typo in comment. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add option to generate CCMP IVs only for mgmt framesMarek Kwaczynski2-7/+14
Some chips can encrypt managment frames in HW, but require generated IV in the frame. Add a key flag that allows us to achieve this. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [use BIT(0) to fill that spot, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: compute chanctx refcount on-the-flyMichal Kazior4-17/+49
It doesn't make much sense to store refcount in the chanctx structure. One still needs to hold chanctx_mtx to get the value safely. Besides, refcount isn't on performance critical paths. This will make implementing chanctx reservation refcounting a little easier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: fix racy usage of chanctx->refcountMichal Kazior1-8/+9
Channel context refcount is protected by chanctx_mtx. Accessing the value without holding the mutex is racy. RCU section didn't guarantee anything here. Theoretically ieee80211_channel_switch() could fail to see refcount change and read "1" instead of, e.g. "2". This means mac80211 could accept CSA even though it shouldn't have. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_free_chanctx()Michal Kazior1-12/+16
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_new_chanctx()Michal Kazior1-13/+43
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: improve chanctx reservation lookupMichal Kazior1-2/+88
Use a separate function to look for reservation chanctx. For multi-interface/channel reservation search sematics differ slightly. The new routine allows reservations to be merged with chanctx that are already reserved by other interface(s). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: improve find_chanctx() for reservationsMichal Kazior1-27/+29
This allows new vifs to be assigned to a chanctx as long as chanctx's reservation chandefs (if any) and chanctx's current chandef (implied by assigned vifs at the time, if any) and the new vif chandef are all compatible. This implies it is impossible to assign a new vif to an in-place reservation chanctx. This gives no advantages for single-channel hardware. It makes sense for multi-channel hardware only. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: track reserved vifs in chanctxMichal Kazior3-4/+13
This can be useful. Provides a more straghtforward way to iterate over interfaces taking part in chanctx reservation and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: track assigned vifs in chanctxMichal Kazior3-0/+9
This can be useful. Provides a more straghtforward way to iterate over interfaces bound to a given chanctx and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add support for radar detection for reservationsMichal Kazior2-2/+7
Initial chanctx reservation code wasn't aware of radar detection requirements. This is necessary for chanctx reservations to be used for channel switching in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: prevent chanctx overcommitMichal Kazior1-1/+23
Do not allocate more channel contexts than a driver is capable for currently matching interface combination. This allows the ieee80211_vif_reserve_chanctx() to act as a guard against breaking interface combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add max channel calculation utility functionMichal Kazior2-0/+43
The utility function has no uses yet. It is aimed at future chanctx reservation management and channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: allow drivers to iterate over matching combinationsMichal Kazior2-7/+64
The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: Fix GO Concurrent relaxation on UNII-3Ilan Peer1-1/+17
At some locations, channels 149-165 are considered a single bundle, while at some other locations, e.g., Indonesia, channels 149-161 are considered a single bundle, while channel 165 belongs to a different bundle. This means that: 1. A station interface connection to an AP on channel 165 allows the instantiation of a P2P GO on channels 149-165. 2. A station interface connection to an AP on channels 149-161 does NOT allow the instantiation of a P2P GO on channel 165. Fix this. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: mesh: always use the latest target_snBob Copeland1-1/+2
When a path target responds to a path request, its response always contains the most up-to-date information; accordingly, it should use the latest target_sn, regardless of net_traversal_jiffies(). Otherwise, only the first path response is considered when constructing a path, as it will have the highest target_sn of all replies during that period. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: fix mesh_add_rsn_ie IE finding loopBob Copeland1-13/+8
Previously, the code to copy the RSN IE from the mesh config would increment its pointer by one in the loop instead of by the element length, so there was the potential for mistaking another IE's data fields as the RSN IE. cfg80211_find_ie() exists, so just use that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: mesh: use u16 return type for u16 getterBob Copeland1-1/+1
u16_field_get() is a simple wrapper around get_unaligned_le16(), and it is being assigned to a u16, so there's no need to promote to u32 in the middle. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: Allow HT capa override to add 40 MHz intolerantJouni Malinen2-2/+19
This can be useful for testing purposes to confirm valid AP behavior on HT 20/40 co-existence functionality. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22cfg80211: fix processing world regdomain when non modularLuis R. Rodriguez1-1/+1
This allows processing of the last regulatory request when we determine its still pending. Without this if a regulatory request failed to get processed by userspace we wouldn't be able to re-process it later. An example situation that can lead to an unprocessed last_request is enabling cfg80211 to be built-in to the kernel, not enabling CFG80211_INTERNAL_REGDB and the CRDA binary not being available at the time the udev rule that kicks of CRDA triggers. In such a situation we want to let some cfg80211 triggers eventually kick CRDA for us again. Without this if the first cycle attempt to kick off CRDA failed we'd be stuck without the ability to change process any further regulatory domains. cfg80211 will trigger re-processing of the regulatory queue whenever schedule_work(&reg_work) is called, currently this happens when: * suspend / resume * disconnect * a beacon hint gets triggered (non DFS 5 GHz AP found) * a regulatory request gets added to the queue We don't have any specific opportunistic late boot triggers to address a late mount of where CRDA resides though, adding that should be done separately through another patch. Without an opportunistic fix then this fix relies at least one of the triggeres above to happen. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22cfg80211: avoid freeing last_request while in flightArik Nemtsov1-8/+16
Avoid freeing the last request while it is being processed. This can happen in some cases if reg_work is kicked for some reason while the currently pending request is in flight. Cc: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Eliad Peller <eliad@wizery.com> Tested-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11cfg80211: reg: set DFS CAC time in case of custom regdJanusz Dziedzic1-0/+7
Set DFS CAC time also in case of using custom and strict regulatory from drivers. In other case we could have unset DFS CAC time directly after driver loaded and before issue regulatory set from user mode. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10cfg80211: ignore invalid BSSIDs when looking for BSSesJohannes Berg1-0/+2
When looking for a BSS matching given parameters, ignore invalid BSSIDs. This avoids, for example, trying to join an IBSS that has a multicast BSSID, which isn't supported by all drivers nor is it a valid configuration of the IBSS so better create a new one with a correctly chosen random BSSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10cfg80211: reject invalid IBSS BSSIDs in wext compat codeJohannes Berg1-0/+3
Don't allow using a multicast address as the BSSID, that isn't a valid configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10cfg80211: remove unused wiphy argument from cfg80211_wext_freq()Zhao, Gang5-8/+12
cfg80211_wext_freq() is declared in wext-compat.h, but its parameter struct wiphy's declaration is not included there. As the parameter isn't used, just remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [remove parameter instead of changing to netdev] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: fix some missing includesZhao, Gang3-0/+5
Some header files in mac80211 don't include all the header files they require, fix that. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: Update conf_is_ht() to work properly with 5/10MHz channelsRostislav Lisovy1-1/+3
The channels with 5/10MHz bandwidth are not HT. We have to reflect this in conf_is_ht() function which returns whether the particular channel is HT or not. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: update comment about WIPHY_FLAG_CUSTOM_REGULATORYKalle Valo1-1/+1
Commit a2f73b6c5db3c ("cfg80211: move regulatory flags to their own variable") renamed WIPHY_FLAG_CUSTOM_REGULATORY to REGULATORY_CUSTOM_REG, but missed to update one comment. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: Allow disabling LDPCPawel Kulakowski2-1/+6
This allows user-space (wpa_supplicant) to disable LDPC coding. Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: fix radar_detect combination checkingMichal Kazior1-1/+1
All bits from radar_detect must match combination radar bitmask. Otherwise it is theoretically possible to lead into an invalid combination provided a driver reports strange combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: allow reservation of a running chanctxLuciano Coelho2-18/+68
With single-channel drivers, we need to be able to change a running chanctx if we want to use chanctx reservation. Not all drivers may be able to do this, so add a flag that indicates support for it. Changing a running chanctx can also be used as an optimization in multi-channel drivers when the context needs to be reserved for future usage. Introduce IEEE80211_CHANCTX_RESERVED chanctx mode to mark a channel as reserved so nobody else can use it (since we know it's going to change). In the future, we may allow several vifs to use the same reservation as long as they plan to use the chanctx on the same future channel. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: implement chanctx reservationLuciano Coelho2-34/+176
In order to support channel switch with multiple vifs and multiple contexts, we implement a concept of channel context reservation. This allows us to reserve a channel context to be used later. The reservation functionality is not tied directly to channel switch and may be used in other situations (eg. reserving a channel context during IBSS join). We first check if an existing compatible context exists and if it does, we reserve it. If there is no compatible context we create a new one and reserve it. Additionally, split ieee80211_vif_copy_chanctx_to_vlans() so we can call it while already holding the chanctx mutex. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: refactor ieee80211_assign/unassign_vif_chanctx into oneLuciano Coelho1-42/+43
Combine the functions into one, so that we can switch from one context to the other without having to unassign and assign separately. This is needed by the channel reservation functionality because otherwise we have a small period of time when the chanctx is set to NULL, which can cause problems if someone else is trying to dereference it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: split ieee80211_vif_change_channel in twoLuciano Coelho1-25/+33
ieee80211_vif_change_channel() locks chanctx_mtx. When implementing channel reservation for CS, we will need to call the function to change channel when the lock is already held, so split the part that requires the lock out and leave the locking in the original function. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: protect AP VLAN list with local->mtxMichal Kazior4-6/+14
It was impossible to change chanctx of master AP for AP VLANs because the copy function requires RTNL which can't be simply taken in mac80211 code due to possible deadlocks. This is required for future chanctx reservation that re-bind vifs to new chanctx. This requires safe AP VLAN iteration without RTNL. Now VLANs can be iterated while holding either RTNL or local->mtx because the list is modified while holding both of these locks. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move more combination checks to mac80211Luciano Coelho7-42/+26
Get rid of the cfg80211_can_add_interface() and cfg80211_can_change_interface() functions by moving that functionality to mac80211. With this patch all interface combination checks are now out of cfg80211 (except for the channel switch case which will be addressed in a future commit). Additionally, modify the ieee80211_check_combinations() function so that an undefined chandef can be passed, in order to use it before a channel is defined. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move combination check to mac80211 for ibssLuciano Coelho2-31/+29
Now that mac80211 can check the interface combinations itself, move the combinations check from cfg80211 to mac80211 when joining an IBSS. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho11-80/+110
Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: refactor cfg80211_chandef_dfs_required()Luciano Coelho6-62/+104
Some interface types don't require DFS (such as STATION, P2P_CLIENT etc). In order to centralize these decisions, make cfg80211_chandef_dfs_required() take the iftype into consideration. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: refactor cfg80211_can_use_iftype_chan()Luciano Coelho3-56/+96
Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: Enable GO operation on indoor channelsIlan Peer3-2/+20
Allow GO operation on a channel marked with IEEE80211_CHAN_INDOOR_ONLY iff there is a user hint indicating that the platform is operating in an indoor environment, i.e., the platform is a printer or media center device. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: Add an option to hint indoor operationIlan Peer4-12/+68
Add the option to hint the wireless core that it is operating in an indoor environment. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 05:49:10 +0300