summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-11-29flow_dissector: use a 64bit load/storeEric Dumazet2-2/+12
Le lundi 28 novembre 2011 à 19:06 -0500, David Miller a écrit : > From: Dimitris Michailidis <dm@chelsio.com> > Date: Mon, 28 Nov 2011 08:25:39 -0800 > > >> +bool skb_flow_dissect(const struct sk_buff *skb, struct flow_keys > >> *flow) > >> +{ > >> + int poff, nhoff = skb_network_offset(skb); > >> + u8 ip_proto; > >> + u16 proto = skb->protocol; > > > > __be16 instead of u16 for proto? > > I'll take care of this when I apply these patches. ( CC trimmed ) Thanks David ! Here is a small patch to use one 64bit load/store on x86_64 instead of two 32bit load/stores. [PATCH net-next] flow_dissector: use a 64bit load/store gcc compiler is smart enough to use a single load/store if we memcpy(dptr, sptr, 8) on x86_64, regardless of CONFIG_CC_OPTIMIZE_FOR_SIZE In IP header, daddr immediately follows saddr, this wont change in the future. We only need to make sure our flow_keys (src,dst) fields wont break the rule. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29sfc: Support for byte queue limitsTom Herbert1-6/+21
Changes to sfc to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Support for byte queue limitsTom Herbert1-4/+22
Changes to bnx2x to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29tg3: Support for byte queue limitsTom Herbert1-0/+8
Changes to tg3 to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29forcedeth: Support for byte queue limitsTom Herbert1-0/+18
Changes to forcedeth to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29e1000e: Support for byte queue limitsTom Herbert1-0/+9
Changes to e1000e to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bql: Byte queue limitsTom Herbert4-9/+172
Networking stack support for byte queue limits, uses dynamic queue limits library. Byte queue limits are maintained per transmit queue, and a dql structure has been added to netdev_queue structure for this purpose. Configuration of bql is in the tx-<n> sysfs directory for the queue under the byte_queue_limits directory. Configuration includes: limit_min, bql minimum limit limit_max, bql maximum limit hold_time, bql slack hold time Also under the directory are: limit, current byte limit inflight, current number of bytes on the queue Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29xps: Add xps_queue_release functionTom Herbert1-42/+47
This patch moves the xps specific parts in netdev_queue_release into its own function which netdev_queue_release can call. This allows netdev_queue_release to be more generic (for adding new attributes to tx queues). Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: Add netdev interfaces for recording sends/compTom Herbert1-0/+28
Add interfaces for drivers to call for recording number of packets and bytes at send time and transmit completion. Also, added a function to "reset" a queue. These will be used by Byte Queue Limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: Add queue state xoff flag for stackTom Herbert7-25/+46
Create separate queue state flags so that either the stack or drivers can turn on XOFF. Added a set of functions used in the stack to determine if a queue is really stopped (either by stack or driver) Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dql: Dynamic queue limitsTom Herbert4-0/+235
Implementation of dynamic queue limits (dql). This is a libary which allows a queue limit to be dynamically managed. The goal of dql is to set the queue limit, number of objects to the queue, to be minimized without allowing the queue to be starved. dql would be used with a queue which has these properties: 1) Objects are queued up to some limit which can be expressed as a count of objects. 2) Periodically a completion process executes which retires consumed objects. 3) Starvation occurs when limit has been reached, all queued data has actually been consumed but completion processing has not yet run, so queuing new data is blocked. 4) Minimizing the amount of queued data is desirable. A canonical example of such a queue would be a NIC HW transmit queue. The queue limit is dynamic, it will increase or decrease over time depending on the workload. The queue limit is recalculated each time completion processing is done. Increases occur when the queue is starved and can exponentially increase over successive intervals. Decreases occur when more data is being maintained in the queue than needed to prevent starvation. The number of extra objects, or "slack", is measured over successive intervals, and to avoid hysteresis the limit is only reduced by the miminum slack seen over a configurable time period. dql API provides routines to manage the queue: - dql_init is called to intialize the dql structure - dql_reset is called to reset dynamic values - dql_queued called when objects are being enqueued - dql_avail returns availability in the queue - dql_completed is called when objects have be consumed in the queue Configuration consists of: - max_limit, maximum limit - min_limit, minimum limit - slack_hold_time, time to measure instances of slack before reducing queue limit Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: add calxeda xgmac ethernet driverRob Herring6-0/+1953
Add support for the XGMAC 10Gb ethernet device in the Calxeda Highbank SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29corral some wayward N/A fw_version dust bunniesRick Jones2-3/+3
Round-up some wayward "N/A" fw_version dust bunnies as part of that clean-up. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29tcp: do not scale TSO segment size with reordering degreeNeal Cardwell3-2/+10
Since 2005 (c1b4a7e69576d65efc31a8cea0714173c2841244) tcp_tso_should_defer has been using tcp_max_burst() as a target limit for deciding how large to make outgoing TSO packets when not using sysctl_tcp_tso_win_divisor. But since 2008 (dd9e0dda66ba38a2ddd1405ac279894260dc5c36) tcp_max_burst() returns the reordering degree. We should not have tcp_tso_should_defer attempt to build larger segments just because there is more reordering. This commit splits the notion of deferral size used in TSO from the notion of burst size used in cwnd moderation, and returns the TSO deferral limit to its original value. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29atm: br2684: Avoid alignment issuesPascal Hambourg1-1/+2
Use memcmp() instead of cast to u16 when checking the PAD field. Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29atm: br2684: Make headroom and hard_header_len depend on the payload typePascal Hambourg1-2/+6
Routed payload requires less headroom than bridged payload. So do not reallocate headroom if not needed. Also, add worst case AAL5 overhead to netdev->hard_header_len. Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: optimize socket timestampingEric Dumazet1-15/+12
We can test/set multiple bits from sk_flags at once, to shorten a bit socket setup/dismantle phase. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: dont call jump_label_dec from irq contextEric Dumazet3-3/+31
Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()Axel Lin31-416/+32
This patch converts the drivers in drivers/net/ethernet/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jonas Bonn <jonas@southpole.se> Cc: Sebastian Poehn <sebastian.poehn@belden.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/can: convert drivers/net/can/* to use module_platform_driver()Axel Lin10-122/+11
This patch converts the drivers in drivers/net/can/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: Fix formatting.Ralf Baechle1-1/+2
The Linux coding style wants the return statement on its own line. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: Cleanup argument SIOCADDRT ioctl argument checking.Ralf Baechle1-4/+2
nr_route.ndigis is unsigned int so the nr_route.ndigis < 0 expression is never true and can be dropped. Doing the nr_ax25_dev_get call later allows the nr_route.ndigis test to bail out without having to dev_put. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: When adding a route verify length of mnemonic string.Ralf Baechle1-0/+5
struct nr_route_struct's mnemonic permits a string of up to 7 bytes to be used. If userland passes a not zero terminated string to the kernel adding a node to the routing table might result in the kernel attempting to read copy a too long string. Mnemonic is part of the NET/ROM routing protocol; NET/ROM routing table updates only broadcast 6 bytes. The 7th byte in the mnemonic array exists only as a \0 termination character for the kernel code's convenience. Fixed by rejecting mnemonic strings that have no terminating \0 in the first 7 characters. Do this test only NETROM_NODE to avoid breaking NETROM_NEIGH where userland might passing an uninitialized mnemonic field. Initial patch by Dan Carpenter <dan.carpenter@oracle.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Walter Harms <wharms@bfs.de> Cc: Thomas Osterried <thomas@osterried.de> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: AX.25: Check ioctl arguments to avoid overflows further down the road.Ralf Baechle1-6/+11
Very large, nonsenical arguments or use in very extreme conditions could result in integer overflows. Check ioctls arguments to avoid such overflows and return -EINVAL for too large arguments. To allow the use of AX.25 for even the most extreme setup (think packet radio to the Phase 5E mars probe) we make no further attempt to clamp the argument range. Originally reported by Fan Long <longfancn@gmail.com> and a first patch was sent by Xi Wang <xi.wang@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Xi Wang <xi.wang@gmail.com> Cc: Joerg Reuter <jreuter@yaina.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings11-46/+49
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move all definitions needed by drivers into <net/dsa.h>Ben Hutchings6-95/+94
Any headers included by drivers should be under include/, and any definitions they use are not really private to the core as the name "dsa_priv.h" suggests. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Remove unnecessary exportsBen Hutchings1-2/+0
I mistakenly exported functions from slave.c that are only called from dsa.c, part of the same module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29Merge branch 'for-davem' of ↵David S. Miller167-39230/+40219
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2011-11-29tg3: Scale back code that modifies MRRSMatt Carlson1-17/+10
Tg3 normally gets a performance boost by increasing the PCI Maximum Read Request Size (MRRS) to 4k. Unfortunately, this is causing some problems on particular hardware platforms. This patch removes all code that modifies the MRRS except for one case. As part of a solution to fix an internal FIFO problem on the 5719, the driver artificially capped the MRRS to 2k for the entire 5719, and later 5720, ASIC revs. This was overly aggressive and only really needed to be done for the 5719 A0. In the spirit of the rest of this patch, the driver will only reprogram the MRRS for this device if the value exceeds the 2k cap. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29tg3: Fix TSO CAP for 5704 devs w / ASF enabledMatt Carlson1-2/+12
On the earliest TSO capable devices, TSO was accomplished through firmware. The TSO cannot coexist with ASF management firmware though. The tg3 driver determines whether or not ASF is enabled by calling tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory. Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move TSO_CAPABLE assignment", accidentally moved the code that determines TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a consequence, the driver was attempting to determine TSO capabilities before it had all the data it needed to make the decision. This patch fixes the problem by revisiting and reevaluating the decision after tg3_get_eeprom_hw_cfg() is called. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29sch_sfb: use skb_flow_dissect()Eric Dumazet1-3/+14
Current SFB double hashing is not fulfilling SFB theory, if two flows share same rxhash value. Using skb_flow_dissect() permits to really have better hash dispersion, and get tunnelling support as well. Double hashing point was mentioned by Florian Westphal Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29cls_flow: use skb_flow_dissect()Eric Dumazet1-132/+48
Instead of using a custom flow dissector, use skb_flow_dissect() and benefit from tunnelling support. This lack of tunnelling support was mentioned by Dan Siemon. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: use skb_flow_dissect() in __skb_get_rxhash()Eric Dumazet1-111/+14
No functional changes. This uses the code we factorized in skb_flow_dissect() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: introduce skb_flow_dissect()Eric Dumazet3-1/+150
We use at least two flow dissectors in network stack, with known limitations and code duplication. Introduce skb_flow_dissect() to factorize this, highly inspired from existing dissector from __skb_get_rxhash() Note : We extensively use skb_header_pointer(), this permits us to not touch skb at all. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Change value comparison orderYaniv Rosner1-23/+23
Change comparison order such that the variable will come before the compared value. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Cosmetic changesYaniv Rosner2-216/+199
Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Fix self test of BCM57800Yaniv Rosner1-2/+12
Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Add known PHY type checkYaniv Rosner1-0/+4
The populate function will fail in case an unknown external PHY is detected. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Change Warpcore MDIO work around modeYaniv Rosner1-1/+3
This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Fix BCM84833 link and LED behaviorYaniv Rosner2-184/+223
This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Warpcore HW reset following fan failureYaniv Rosner2-0/+17
Put Warpcore in low power mode in case of fan failure to reduce heat. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: ETS changesYaniv Rosner2-4/+17
Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: PFC changesYaniv Rosner2-76/+179
Change BRB to work in per class guaranteed mode and handle cases for BW 0%. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29tcp: tcp_sendmsg() wrong access to sk_route_capsEric Dumazet1-4/+4
Now sk_route_caps is u64, its dangerous to use an integer to store result of an AND operator. It wont work if NETIF_F_SG is moved on the upper part of u64. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28Merge branch 'master' of ↵John W. Linville167-39230/+40219
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-11-28net/irda: convert drivers/net/irda/* to use module_platform_driver()Axel Lin4-48/+4
This patch converts the drivers in drivers/net/irda/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tcp: skip cwnd moderation in TCP_CA_Open in tcp_try_to_openNeal Cardwell1-1/+2
The problem: Senders were overriding cwnd values picked during an undo by calling tcp_moderate_cwnd() in tcp_try_to_open(). The fix: Don't moderate cwnd in tcp_try_to_open() if we're in TCP_CA_Open, since doing so is generally unnecessary and specifically would override a DSACK-based undo of a cwnd reduction made in fast recovery. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tcp: allow undo from reordered DSACKsNeal Cardwell1-13/+2
Previously, SACK-enabled connections hung around in TCP_CA_Disorder state while snd_una==high_seq, just waiting to accumulate DSACKs and hopefully undo a cwnd reduction. This could and did lead to the following unfortunate scenario: if some incoming ACKs advance snd_una beyond high_seq then we were setting undo_marker to 0 and moving to TCP_CA_Open, so if (due to reordering in the ACK return path) we shortly thereafter received a DSACK then we were no longer able to undo the cwnd reduction. The change: Simplify the congestion avoidance state machine by removing the behavior where SACK-enabled connections hung around in the TCP_CA_Disorder state just waiting for DSACKs. Instead, when snd_una advances to high_seq or beyond we typically move to TCP_CA_Open immediately and allow an undo in either TCP_CA_Open or TCP_CA_Disorder if we later receive enough DSACKs. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tcp: use SACKs and DSACKs that arrive on ACKs below snd_unaNeal Cardwell1-3/+7
The bug: When the ACK field is below snd_una (which can happen when ACKs are reordered), senders ignored DSACKs (preventing undo) and did not call tcp_fastretrans_alert, so they did not increment prr_delivered to reflect newly-SACKed sequence ranges, and did not call tcp_xmit_retransmit_queue, thus passing up chances to send out more retransmitted and new packets based on any newly-SACKed packets. The change: When the ACK field is below snd_una (the "old_ack" goto label), call tcp_fastretrans_alert to allow undo based on any newly-arrived DSACKs and try to send out more packets based on newly-SACKed packets. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tcp: use DSACKs that arrive when packets_out is 0Neal Cardwell1-0/+4
The bug: Senders ignored DSACKs after recovery when there were no outstanding packets (a common scenario for HTTP servers). The change: when there are no outstanding packets (the "no_queue" goto label), call tcp_fastretrans_alert() in order to use DSACKs to undo congestion window reductions. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 06:19:46 +0300