summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-24net/ncsi: handle overflow when incrementing mac addressTao Ren2-1/+17
Previously BMC's MAC address is calculated by simply adding 1 to the last byte of network controller's MAC address, and it produces incorrect result when network controller's MAC address ends with 0xFF. The problem can be fixed by calling eth_addr_inc() function to increment MAC address; besides, the MAC address is also validated before assigning to BMC. Fixes: cb10c7c0dfd9 ("net/ncsi: Add NCSI Broadcom OEM command") Signed-off-by: Tao Ren <taoren@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: socionext: replace napi_alloc_frag with the netdev variant on initIlias Apalodimas1-4/+7
The netdev variant is usable on any context since it disables interrupts. The napi variant of the call should only be used within softirq context. Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag call Changes since v1: - Adjusted commit message Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Fixes: 4acb20b46214 ("net: socionext: different approach on DMA") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: atheros: fix spelling mistake "underun" -> "underrun"Colin Ian King4-5/+5
There are spelling mistakes in structure elements, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23spi: ST ST95HF NFC: declare missing of tableDaniel Gomez1-0/+7
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/nfc/st95hf/st95hf.ko | grep alias alias: spi:st95hf After this patch: modinfo drivers/nfc/st95hf/st95hf.ko | grep alias alias: spi:st95hf alias: of:N*T*Cst,st95hfC* alias: of:N*T*Cst,st95hf Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23spi: Micrel eth switch: declare missing of tableDaniel Gomez1-0/+9
Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 After this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 alias: of:N*T*Cmicrel,ksz8795C* alias: of:N*T*Cmicrel,ksz8795 alias: of:N*T*Cmicrel,ksz8864C* alias: of:N*T*Cmicrel,ksz8864 alias: of:N*T*Cmicrel,ks8995C* alias: of:N*T*Cmicrel,ks8995 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: stmmac: move stmmac_check_ether_addr() to driver probeVinod Koul1-2/+2
stmmac_check_ether_addr() checks the MAC address and assigns one in driver open(). In many cases when we create slave netdevice, the dev addr is inherited from master but the master dev addr maybe NULL at that time, so move this call to driver probe so that address is always valid. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Tested-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: Sneh Shah <snehshah@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller17-105/+493
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Add a selftest for icmp packet too big errors with conntrack, from Florian Westphal. 2) Validate inner header in ICMP error message does not lie to us in conntrack, also from Florian. 3) Initialize ct->timeout to calm down KASAN, from Alexander Potapenko. 4) Skip ICMP error messages from tunnels in IPVS, from Julian Anastasov. 5) Use a hash to expose conntrack and expectation ID, from Florian Westphal. 6) Prevent shift wrap in nft_chain_parse_hook(), from Dan Carpenter. 7) Fix broken ICMP ID randomization with NAT, also from Florian. 8) Remove WARN_ON in ebtables compat that is reached via syzkaller, from Florian Westphal. 9) Fix broken timestamps since fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC"), from Florian. 10) Fix logging of invalid packets in conntrack, from Andrei Vagin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22netfilter: fix nf_l4proto_log_invalid to log invalid packetsAndrei Vagin1-1/+1
It doesn't log a packet if sysctl_log_invalid isn't equal to protonum OR sysctl_log_invalid isn't equal to IPPROTO_RAW. This sentence is always true. I believe we need to replace OR to AND. Cc: Florian Westphal <fw@strlen.de> Fixes: c4f3db1595827 ("netfilter: conntrack: add and use nf_l4proto_log_invalid") Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-22netfilter: never get/set skb->tstampFlorian Westphal4-16/+18
setting net.netfilter.nf_conntrack_timestamp=1 breaks xmit with fq scheduler. skb->tstamp might be "refreshed" using ktime_get_real(), but fq expects CLOCK_MONOTONIC. This patch removes all places in netfilter that check/set skb->tstamp: 1. To fix the bogus "start" time seen with conntrack timestamping for outgoing packets, never use skb->tstamp and always use current time. 2. In nfqueue and nflog, only use skb->tstamp for incoming packets, as determined by current hook (prerouting, input, forward). 3. xt_time has to use system clock as well rather than skb->tstamp. We could still use skb->tstamp for prerouting/input/foward, but I see no advantage to make this conditional. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Cc: Eric Dumazet <edumazet@google.com> Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-22netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ONFlorian Westphal1-1/+2
It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule. Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-21Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARKCorentin Labbe1-2/+0
CONFIG_DECNET_ROUTE_FWMARK was removed in commit 47dcf0cb1005 ("[NET]: Rethink mark field in struct flowi") Since nothing replace it (and nothindg need to replace it, simply remove it from documentation. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-21dt-bindings: add an explanation for internal phy-modeCorentin Labbe1-1/+2
When working on the Allwinner internal PHY, the first work was to use the "internal" mode, but some answer was made my mail on what are really internal mean for PHY. This patch write that in the doc. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-21net/tls: don't leak IV and record seq when offload failsJakub Kicinski3-6/+4
When device refuses the offload in tls_set_device_offload_rx() it calls tls_sw_free_resources_rx() to clean up software context state. Unfortunately, tls_sw_free_resources_rx() does not free all the state tls_set_sw_offload() allocated - it leaks IV and sequence number buffers. All other code paths which lead to tls_sw_release_resources_rx() (which tls_sw_free_resources_rx() calls) free those right before the call. Avoid the leak by moving freeing of iv and rec_seq into tls_sw_release_resources_rx(). Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-21net/tls: avoid potential deadlock in tls_set_device_offload_rx()Jakub Kicinski1-0/+2
If device supports offload, but offload fails tls_set_device_offload_rx() will call tls_sw_free_resources_rx() which (unhelpfully) releases and reacquires the socket lock. For a small fix release and reacquire the device_offload_lock. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-21selftests/net: correct the return value for run_afpackettestsPo-Hsu Lin1-0/+5
The run_afpackettests will be marked as passed regardless the return value of those sub-tests in the script: -------------------- running psock_tpacket test -------------------- [FAIL] selftests: run_afpackettests [PASS] Fix this by changing the return value for each tests. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20Merge tag 'mlx5-fixes-2019-04-19' of ↵David S. Miller5-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-04-19 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.7: ('net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query') For -stable v4.19: ('net/mlx5e: Fix the max MTU check in case of XDP') For -stable v5.0: ('net/mlx5e: Fix use-after-free after xdp_return_frame') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20team: fix possible recursive locking when add slavesHangbin Liu1-0/+7
If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20selftests/net: correct the return value for run_netsocktestsPo-Hsu Lin1-1/+1
The run_netsocktests will be marked as passed regardless the actual test result from the ./socket: selftests: net: run_netsocktests ======================================== -------------------- running socket test -------------------- [FAIL] ok 1..6 selftests: net: run_netsocktests [PASS] This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages queryErez Alfasi2-5/+1
Querying EEPROM high pages data for SFP module is currently not supported by our driver and yet queried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module will limit the reading for page 0 only and prevent invalid FW queries. Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-19net/mlx5e: Fix the max MTU check in case of XDPMaxim Mikityanskiy3-4/+24
MLX5E_XDP_MAX_MTU was calculated incorrectly. It didn't account for NET_IP_ALIGN and MLX5E_HW2SW_MTU, and it also misused MLX5_SKB_FRAG_SZ. This commit fixes the calculations and adds a brief explanation for the formula used. Fixes: a26a5bdf3ee2d ("net/mlx5e: Restrict the combination of large MTU and XDP") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-19net/mlx5e: Fix use-after-free after xdp_return_frameMaxim Mikityanskiy1-2/+2
xdp_return_frame releases the frame. It leads to releasing the page, so it's not allowed to access xdpi.xdpf->len after that, because xdpi.xdpf is at xdp->data_hard_start after convert_to_xdp_frame. This patch moves the memory access to precede the return of the frame. Fixes: 58b99ee3e3ebe ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-19of_net: Fix residues after of_get_nvmem_mac_address removalPetr Štetiar4-3/+6
I've discovered following discrepancy in the bindings/net/ethernet.txt documentation, where it states following: - nvmem-cells: phandle, reference to an nvmem node for the MAC address; - nvmem-cell-names: string, should be "mac-address" if nvmem is to be.. which is actually misleading and confusing. There are only two ethernet drivers in the tree, cadence/macb and davinci which supports this properties. This nvmem-cell* properties were introduced in commit 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper"), but commit afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") forget to properly clean up this parts. So this patch fixes the documentation by moving the nvmem-cell* properties at the appropriate places. While at it, I've removed unused include as well. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Fixes: afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net/tls: fix refcount adjustment in fallbackJakub Kicinski1-3/+10
Unlike atomic_add(), refcount_add() does not deal well with a negative argument. TLS fallback code reallocates the skb and is very likely to shrink the truesize, leading to: [ 189.513254] WARNING: CPU: 5 PID: 0 at lib/refcount.c:81 refcount_add_not_zero_checked+0x15c/0x180 Call Trace: refcount_add_checked+0x6/0x40 tls_enc_skb+0xb93/0x13e0 [tls] Once wmem_allocated count saturates the application can no longer send data on the socket. This is similar to Eric's fixes for GSO, TCP: commit 7ec318feeed1 ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") and UDP: commit 575b65bc5bff ("udp: avoid refcount_t saturation in __udp_gso_segment()"). Unlike the GSO case, for TLS fallback it's likely that the skb has shrunk, so the "likely" annotation is the other way around (likely branch being "sub"). Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18stmmac: pci: Adjust IOT2000 matchingSu Bao Cheng1-2/+6
Since there are more IOT2040 variants with identical hardware but different asset tags, the asset tag matching should be adjusted to support them. For the board name "SIMATIC IOT2000", currently there are 2 types of hardware, IOT2020 and IOT2040. The IOT2020 is identified by its unique asset tag. Match on it first. If we then match on the board name only, we will catch all IOT2040 variants. In the future there will be no other devices with the "SIMATIC IOT2000" DMI board name but different hardware. Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18firestream: fix spelling mistake "tramsitted" -> "transmitted"Colin Ian King1-1/+1
There is a spelling mistake in a debug message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: ipv6: addrlabel: fix spelling mistake "requewst" -> "request"Colin Ian King1-1/+1
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18Merge branch 'mlxsw-Few-small-fixes'David S. Miller2-4/+4
Ido Schimmel says: ==================== mlxsw: Few small fixes Patch #1, from Petr, adjusts mlxsw to provide the same QoS behavior for both Spectrum-1 and Spectrum-2. The fix is required due to a difference in the behavior of Spectrum-2 compared to Spectrum-1. The problem and solution are described in the detail in the changelog. Patch #2 increases the time period in which the driver waits for the firmware to signal it has finished its initialization. The issue will be fixed in future firmware versions and the timeout will be decreased. Patch #3, from Amit, fixes a display problem where the autoneg status in ethtool is not updated in case the netdev is not running. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18mlxsw: spectrum: Fix autoneg status in ethtoolAmit Cohen1-2/+2
If link is down and autoneg is set to on/off, the status in ethtool does not change. The reason is when the link is down the function returns with zero before changing autoneg value. Move the checking of link state (up/down) to be performed after setting autoneg value, in order to be sure that autoneg will change in any case. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18mlxsw: pci: Reincrease PCI reset timeoutIdo Schimmel1-1/+1
During driver initialization the driver sends a reset to the device and waits for the firmware to signal that it is ready to continue. Commit d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout") increased the timeout to 13 seconds due to longer PHY calibration in Spectrum-2 compared to Spectrum-1. Recently it became apparent that this timeout is too short and therefore this patch increases it again to a safer limit that will be reduced in the future. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Fixes: d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18mlxsw: spectrum: Put MC TCs into DWRR modePetr Machata1-1/+1
Both Spectrum-1 and Spectrum-2 chips are currently configured such that pairs of TC n (which is used for UC traffic) and TC n+8 (which is used for MC traffic) are feeding into the same subgroup. Strict prioritization is configured between the two TCs, and by enabling MC-aware mode on the switch, the lower-numbered (UC) TCs are favored over the higher-numbered (MC) TCs. On Spectrum-2 however, there is an issue in configuration of the MC-aware mode. As a result, MC traffic is prioritized over UC traffic. To work around the issue, configure the MC TCs with DWRR mode (while keeping the UC TCs in strict mode). With this patch, the multicast-unicast arbitration results in the same behavior on both Spectrum-1 and Spectrum-2 chips. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18s390: ctcm: fix ctcm_new_device error return codeArnd Bergmann1-0/+1
clang points out that the return code from this function is undefined for one of the error paths: ../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here return result; ^~~~~~ ../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning int result; ^ Make it return -ENODEV here, as in the related failure cases. gcc has a known bug in underreporting some of these warnings when it has already eliminated the assignment of the return code based on some earlier optimization step. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18nfp: abm: fix spelling mistake "offseting" -> "offsetting"Colin Ian King1-2/+2
There are a couple of spelling mistakes in NL_SET_ERR_MSG_MOD error messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: stmmac: Use bfsize1 in ndesc_init_rx_descYueHaibing1-1/+1
gcc warn this: drivers/net/ethernet/stmicro/stmmac/norm_desc.c: In function ndesc_init_rx_desc: drivers/net/ethernet/stmicro/stmmac/norm_desc.c:138:6: warning: variable 'bfsize1' set but not used [-Wunused-but-set-variable] Like enh_desc_init_rx_desc, we should use bfsize1 in ndesc_init_rx_desc to calculate 'p->des1' Fixes: 583e63614149 ("net: stmmac: use correct DMA buffer size in the RX descriptor") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv4: set the tcp_min_rtt_wlen range from 0 to one dayZhangXiaoxu2-1/+5
There is a UBSAN report as below: UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56 signed integer overflow: 2147483647 * 1000 cannot be represented in type 'int' CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e #1 Call Trace: <IRQ> dump_stack+0x8c/0xba ubsan_epilogue+0x11/0x60 handle_overflow+0x12d/0x170 ? ttwu_do_wakeup+0x21/0x320 __ubsan_handle_mul_overflow+0x12/0x20 tcp_ack_update_rtt+0x76c/0x780 tcp_clean_rtx_queue+0x499/0x14d0 tcp_ack+0x69e/0x1240 ? __wake_up_sync_key+0x2c/0x50 ? update_group_capacity+0x50/0x680 tcp_rcv_established+0x4e2/0xe10 tcp_v4_do_rcv+0x22b/0x420 tcp_v4_rcv+0xfe8/0x1190 ip_protocol_deliver_rcu+0x36/0x180 ip_local_deliver+0x15b/0x1a0 ip_rcv+0xac/0xd0 __netif_receive_skb_one_core+0x7f/0xb0 __netif_receive_skb+0x33/0xc0 netif_receive_skb_internal+0x84/0x1c0 napi_gro_receive+0x2a0/0x300 receive_buf+0x3d4/0x2350 ? detach_buf_split+0x159/0x390 virtnet_poll+0x198/0x840 ? reweight_entity+0x243/0x4b0 net_rx_action+0x25c/0x770 __do_softirq+0x19b/0x66d irq_exit+0x1eb/0x230 do_IRQ+0x7a/0x150 common_interrupt+0xf/0xf </IRQ> It can be reproduced by: echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen Fixes: f672258391b42 ("tcp: track min RTT using windowed min-filter") Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge tag 'for-linus-5.1-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds3-3/+19
Pull IPMI fixes from Corey Minyard: "Fixes for some bugs cause by recent changes. One crash if you feed bad data to the module parameters, one BUG that sometimes occurs when a user closes the connection, and one bug that cause the driver to not work if the configuration information only comes in from SMBIOS" * tag 'for-linus-5.1-2' of git://github.com/cminyard/linux-ipmi: ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier ipmi: ipmi_si_hardcode.c: init si_type array to fix a crash ipmi: Fix failure on SMBIOS specified devices
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds125-741/+1118
Pull networking fixes from David Miller: 1) Handle init flow failures properly in iwlwifi driver, from Shahar S Matityahu. 2) mac80211 TXQs need to be unscheduled on powersave start, from Felix Fietkau. 3) SKB memory accounting fix in A-MDSU aggregation, from Felix Fietkau. 4) Increase RCU lock hold time in mlx5 FPGA code, from Saeed Mahameed. 5) Avoid checksum complete with XDP in mlx5, also from Saeed. 6) Fix netdev feature clobbering in ibmvnic driver, from Thomas Falcon. 7) Partial sent TLS record leak fix from Jakub Kicinski. 8) Reject zero size iova range in vhost, from Jason Wang. 9) Allow pending work to complete before clcsock release from Karsten Graul. 10) Fix XDP handling max MTU in thunderx, from Matteo Croce. 11) A lot of protocols look at the sa_family field of a sockaddr before validating it's length is large enough, from Tetsuo Handa. 12) Don't write to free'd pointer in qede ptp error path, from Colin Ian King. 13) Have to recompile IP options in ipv4_link_failure because it can be invoked from ARP, from Stephen Suryaputra. 14) Doorbell handling fixes in qed from Denis Bolotin. 15) Revert net-sysfs kobject register leak fix, it causes new problems. From Wang Hai. 16) Spectre v1 fix in ATM code, from Gustavo A. R. Silva. 17) Fix put of BROPT_VLAN_STATS_PER_PORT in bridging code, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (111 commits) socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW tcp: tcp_grow_window() needs to respect tcp_space() ocelot: Clean up stats update deferred work ocelot: Don't sleep in atomic context (irqs_disabled()) net: bridge: fix netlink export of vlan_stats_per_port option qed: fix spelling mistake "faspath" -> "fastpath" tipc: set sysctl_tipc_rmem and named_timeout right range tipc: fix link established but not in session net: Fix missing meta data in skb with vlan packet net: atm: Fix potential Spectre v1 vulnerabilities net/core: work around section mismatch warning for ptp_classifier net: bridge: fix per-port af_packet sockets bnx2x: fix spelling mistake "dicline" -> "decline" route: Avoid crash from dereferencing NULL rt->from MAINTAINERS: normalize Woojung Huh's email address bonding: fix event handling for stacked bonds Revert "net-sysfs: Fix memory leak in netdev_register_kobject" rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check qed: Fix the DORQ's attentions handling qed: Fix missing DORQ attentions ...
2019-04-17ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrierCorey Minyard1-2/+17
free_user() could be called in atomic context. This patch pushed the free operation off into a workqueue. Example: BUG: sleeping function called from invalid context at kernel/workqueue.c:2856 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015 Call Trace: dump_stack+0x5c/0x7b ___might_sleep+0xec/0x110 __flush_work+0x48/0x1f0 ? try_to_del_timer_sync+0x4d/0x80 _cleanup_srcu_struct+0x104/0x140 free_user+0x18/0x30 [ipmi_msghandler] ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler] deliver_response+0xbd/0xd0 [ipmi_msghandler] deliver_local_response+0xe/0x30 [ipmi_msghandler] handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler] ? dequeue_entity+0xa0/0x960 handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler] tasklet_action_common.isra.22+0x103/0x120 __do_softirq+0xf8/0x2d7 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x11d/0x1e0 kthread+0x103/0x140 ? sort_range+0x20/0x20 ? kthread_destroy_worker+0x40/0x40 ret_from_fork+0x1f/0x40 Fixes: 77f8269606bf ("ipmi: fix use-after-free of user->release_barrier.rda") Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 5.0 Cc: Yang Yingliang <yangyingliang@huawei.com>
2019-04-17socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEWArnd Bergmann1-2/+2
It looks like the new socket options only work correctly for native execution, but in case of compat mode fall back to the old behavior as we ignore the 'old_timeval' flag. Rework so we treat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW the same way in compat and native 32-bit mode. Cc: Deepa Dinamani <deepa.kernel@gmail.com> Fixes: a9beb86ae6e5 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17tcp: tcp_grow_window() needs to respect tcp_space()Eric Dumazet1-5/+5
For some reason, tcp_grow_window() correctly tests if enough room is present before attempting to increase tp->rcv_ssthresh, but does not prevent it to grow past tcp_space() This is causing hard to debug issues, like failing the (__tcp_select_window(sk) >= tp->rcv_wnd) test in __tcp_ack_snd_check(), causing ACK delays and possibly slow flows. Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio, we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000" after about 60 round trips, when the active side no longer sends immediate acks. This bug predates git history. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ocelot: Clean up stats update deferred workClaudiu Manoil1-8/+14
This is preventive cleanup that may save troubles later. No need to cancel repeateadly queued work if code is properly refactored. Don't let the ethtool -s process interfere with the stat workqueue scheduling. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ocelot: Don't sleep in atomic context (irqs_disabled())Claudiu Manoil1-1/+1
Preemption disabled at: [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38 Call trace: [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0 [<ffff00000808a9a4>] show_stack+0x14/0x20 [<ffff000008e6c0c0>] dump_stack+0xac/0xe4 [<ffff0000080fe76c>] ___might_sleep+0x164/0x238 [<ffff0000080fe890>] __might_sleep+0x50/0x88 [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0 [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common] [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0 [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38 Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net: bridge: fix netlink export of vlan_stats_per_port optionNikolay Aleksandrov1-1/+1
Since the introduction of the vlan_stats_per_port option the netlink export of it has been broken since I made a typo and used the ifla attribute instead of the bridge option to retrieve its state. Sysfs export is fine, only netlink export has been affected. Fixes: 9163a0fc1f0c0 ("net: bridge: add support for per-port vlan stats") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17qed: fix spelling mistake "faspath" -> "fastpath"Colin Ian King1-1/+1
There is a spelling mistake in a DP_INFO message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17tipc: set sysctl_tipc_rmem and named_timeout right rangeJie Liu1-2/+6
We find that sysctl_tipc_rmem and named_timeout do not have the right minimum setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem. And named_timeout as a timeout setting should be not less than zero. Fixes: cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf") Fixes: a5325ae5b8bff ("tipc: add name distributor resiliency queue") Signed-off-by: Jie Liu <liujie165@huawei.com> Reported-by: Qiang Ning <ningqiang1@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17tipc: fix link established but not in sessionTuong Lien1-0/+2
According to the link FSM, when a link endpoint got RESET_MSG (- a traditional one without the stopping bit) from its peer, it moves to PEER_RESET state and raises a LINK_DOWN event which then resets the link itself. Its state will become ESTABLISHING after the reset event and the link will be re-established soon after this endpoint starts to send ACTIVATE_MSG to the peer. There is no problem with this mechanism, however the link resetting has cleared the link 'in_session' flag (along with the other important link data such as: the link 'mtu') that was correctly set up at the 1st step (i.e. when this endpoint received the peer RESET_MSG). As a result, the link will become ESTABLISHED, but the 'in_session' flag is not set, and all STATE_MSG from its peer will be dropped at the link_validate_msg(). It means the link not synced and will sooner or later face a failure. Since the link reset action is obviously needed for a new link session (this is also true in the other situations), the problem here is that the link is re-established a bit too early when the link endpoints are not really in-sync yet. The commit forces a resync as already done in the previous commit 91986ee166cf ("tipc: fix link session and re-establish issues") by simply varying the link 'peer_session' value at the link_reset(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net: Fix missing meta data in skb with vlan packetYuya Kusakabe1-1/+9
skb_reorder_vlan_header() should move XDP meta data with ethernet header if XDP meta data exists. Fixes: de8f3a83b0a0 ("bpf: add meta pointer for direct access") Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com> Signed-off-by: Takeru Hayasaka <taketarou2@gmail.com> Co-developed-by: Takeru Hayasaka <taketarou2@gmail.com> Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net: atm: Fix potential Spectre v1 vulnerabilitiesGustavo A. R. Silva1-1/+5
arg is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:715 lec_mcast_attach() warn: potential spectre issue 'dev_lec' [r] (local cap) Fix this by sanitizing arg before using it to index dev_lec. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net/core: work around section mismatch warning for ptp_classifierArd Biesheuvel1-3/+4
The routine ptp_classifier_init() uses an initializer for an automatic struct type variable which refers to an __initdata symbol. This is perfectly legal, but may trigger a section mismatch warning when running the compiler in -fpic mode, due to the fact that the initializer may be emitted into an anonymous .data section thats lack the __init annotation. So work around it by using assignments instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net: bridge: fix per-port af_packet socketsNikolay Aleksandrov1-9/+14
When the commit below was introduced it changed two visible things: - the skb was no longer passed through the protocol handlers with the original device - the skb was passed up the stack with skb->dev = bridge The first change broke af_packet sockets on bridge ports. For example we use them for hostapd which listens for ETH_P_PAE packets on the ports. We discussed two possible fixes: - create a clone and pass it through NF_HOOK(), act on the original skb based on the result - somehow signal to the caller from the okfn() that it was called, meaning the skb is ok to be passed, which this patch is trying to implement via returning 1 from the bridge link-local okfn() Note that we rely on the fact that NF_QUEUE/STOLEN would return 0 and drop/error would return < 0 thus the okfn() is called only when the return was 1, so we signal to the caller that it was called by preserving the return value from nf_hook(). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipmi: ipmi_si_hardcode.c: init si_type array to fix a crashTony Camuso1-0/+2
The intended behavior of function ipmi_hardcode_init_one() is to default to kcs interface when no type argument is presented when initializing ipmi with hard coded addresses. However, the array of char pointers allocated on the stack by function ipmi_hardcode_init() was not inited to zeroes, so it contained stack debris. Consequently, passing the cruft stored in this array to function ipmi_hardcode_init_one() caused a crash when it was unable to detect that the char * being passed was nonsense and tried to access the address specified by the bogus pointer. The fix is simply to initialize the si_type array to zeroes, so if there were no type argument given to at the command line, function ipmi_hardcode_init_one() could properly default to the kcs interface. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Message-Id: <1554837603-40299-1-git-send-email-tcamuso@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-10 17:16:40 +0300