summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski287-1732/+3708
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge tag 'wireless-2024-06-27' of ↵Jakub Kicinski9-30/+33
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a few changes: - maintainers: Larry Finger sadly passed away - maintainers: ath trees are in their group now - TXQ FQ quantum configuration fix - TI wl driver: work around stuck FW in AP mode - mac80211: disable softirqs in some new code needing that * tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: MAINTAINERS: wifi: update ath.git location MAINTAINERS: Remembering Larry Finger wifi: mac80211: disable softirqs for queued frame handling wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values wifi: wlcore: fix wlcore AP mode ==================== Link: https://patch.msgid.link/20240627083627.15312-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge tag 'net-6.10-rc6' of ↵Linus Torvalds63-594/+1663
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, bpf and netfilter. There are a bunch of regressions addressed here, but hopefully nothing spectacular. We are still waiting the driver fix from Intel, mentioned by Jakub in the previous networking pull. Current release - regressions: - core: add softirq safety to netdev_rename_lock - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO - batman-adv: fix RCU race at module unload time Previous releases - regressions: - openvswitch: get related ct labels from its master if it is not confirmed - eth: bonding: fix incorrect software timestamping report - eth: mlxsw: fix memory corruptions on spectrum-4 systems - eth: ionic: use dev_consume_skb_any outside of napi Previous releases - always broken: - netfilter: fully validate NFT_DATA_VALUE on store to data registers - unix: several fixes for OoB data - tcp: fix race for duplicate reqsk on identical SYN - bpf: - fix may_goto with negative offset - fix the corner case with may_goto and jump to the 1st insn - fix overrunning reservations in ringbuf - can: - j1939: recover socket queue on CAN bus error during BAM transmission - mcp251xfd: fix infinite loop when xmit fails - dsa: microchip: monitor potential faults in half-duplex mode - eth: vxlan: pull inner IP header in vxlan_xmit_one() - eth: ionic: fix kernel panic due to multi-buffer handling Misc: - selftest: unix tests refactor and a lot of new cases added" * tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: mana: Fix possible double free in error handling path selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c. af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head. selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c selftest: af_unix: Check SIGURG after every send() in msg_oob.c selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c af_unix: Don't stop recv() at consumed ex-OOB skb. selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c. af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head. af_unix: Stop recv(MSG_PEEK) at consumed OOB skb. selftest: af_unix: Add msg_oob.c. selftest: af_unix: Remove test_unix_oob.c. tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset() netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers net: usb: qmi_wwan: add Telit FN912 compositions tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO ionic: use dev_consume_skb_any outside of napi net: dsa: microchip: fix wrong register write when masking interrupt Fix race for duplicate reqsk on identical SYN ibmvnic: Add tx check to prevent skb leak ...
2024-06-27Merge tag 'sound-6.10-rc6' of ↵Linus Torvalds33-85/+220
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became bigger than usual, as it receives a pile of pending ASoC fixes. Most of changes are for device-specific issues while there are a few core fixes that are all rather trivial: - DMA-engine sync fixes - Continued MIDI2 conversion fixes - Various ASoC Intel SOF fixes - A series of ASoC topology fixes for memory handling - AMD ACP fix, curing a recent regression, too - Platform / codec-specific fixes for mediatek, atmel, realtek, etc" * tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits) ASoC: rt5645: fix issue of random interrupt from push-button ALSA: seq: Fix missing MSB in MIDI2 SPP conversion ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11. ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820 ALSA: dmaengine_pcm: terminate dmaengine before synchronize ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx ALSA: PCM: Allow resume only for suspended streams ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link ASoC: fsl-asoc-card: set priv->pdev before using it ASoC: amd: acp: move chip->flag variable assignment ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe() ASoC: amd: acp: add a null check for chip_pdev structure ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64 ASoC: q6apm-lpass-dai: close graph on prepare errors ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up ASoC: topology: Fix route memory corruption ASoC: rt722-sdca-sdw: add debounce time for type detection ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback ...
2024-06-27Merge tag 'nf-24-06-27' of ↵Paolo Abeni4-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for net: Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR to move the sysctl toggle to enable SRv6 netfilter hooks from nf_conntrack to the core, from Jianguo Wu. Patch #2 fixes a possible pointer leak to userspace due to insufficient validation of NFT_DATA_VALUE. Linus found this pointer leak to userspace via zdi-disclosures@ and forwarded the notice to Netfilter maintainers, he appears as reporter because whoever found this issue never approached Netfilter maintainers neither via security@ nor in private. netfilter pull request 24-06-27 * tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n ==================== Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27net: mana: Fix possible double free in error handling pathMa Ke1-0/+2
When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL. Fixes: a69839d4327d ("net: mana: Add support for auxiliary device") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27Merge branch 'af_unix-fix-bunch-of-msg_oob-bugs-and-add-new-tests'Paolo Abeni5-444/+766
Kuniyuki Iwashima says: ==================== af_unix: Fix bunch of MSG_OOB bugs and add new tests. This series rewrites the selftest for AF_UNIX MSG_OOB and fixes bunch of bugs that AF_UNIX behaves differently compared to TCP. Note that the test discovered few more bugs in TCP side, which will be fixed in another series. ==================== Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.Kuniyuki Iwashima1-0/+72
To catch regression, let's check ioctl(SIOCATMARK) after every send() and recv() calls. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.Kuniyuki Iwashima2-2/+81
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the OOB skb is at the head of the receive queue and no new OOB data is queued. Without fix: # RUN msg_oob.no_peek.oob ... # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1) # oob: Test terminated by assertion # FAIL msg_oob.no_peek.oob not ok 2 msg_oob.no_peek.oob With fix: # RUN msg_oob.no_peek.oob ... # OK msg_oob.no_peek.oob ok 2 msg_oob.no_peek.oob Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.cKuniyuki Iwashima1-0/+147
When OOB data is in recvq, we can detect it with epoll by checking EPOLLPRI. This patch add checks for EPOLLPRI after every send() and recv() in all test cases. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Check SIGURG after every send() in msg_oob.cKuniyuki Iwashima1-1/+50
When data is sent with MSG_OOB, SIGURG is sent to a process if the receiver socket has set its owner to the process by ioctl(FIOSETOWN) or fcntl(F_SETOWN). This patch adds SIGURG check after every send(MSG_OOB) call. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.cKuniyuki Iwashima1-0/+91
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently. This patch adds some test cases for SO_OOBINLINE. Note the new test cases found two bugs in TCP. 1) After reading OOB data with non-inline mode, we can re-read the data by setting SO_OOBINLINE. # RUN msg_oob.no_peek.inline_oob_ahead_break ... # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world # msg_oob.c:147:inline_oob_ahead_break:TCP :oworld # OK msg_oob.no_peek.inline_oob_ahead_break ok 14 msg_oob.no_peek.inline_oob_ahead_break 2) The head OOB data is dropped if SO_OOBINLINE is disabled if a new OOB data is queued. # RUN msg_oob.no_peek.inline_ex_oob_drop ... # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x # msg_oob.c:172:inline_ex_oob_drop:TCP :y # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y # msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable # OK msg_oob.no_peek.inline_ex_oob_drop ok 17 msg_oob.no_peek.inline_ex_oob_drop Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27af_unix: Don't stop recv() at consumed ex-OOB skb.Kuniyuki Iwashima2-1/+17
Currently, recv() is stopped at a consumed OOB skb even if a new OOB skb is queued and we can ignore the old OOB skb. >>> from socket import * >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hellowor', MSG_OOB) 8 >>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq. b'r' >>> c1.send(b'ld', MSG_OOB) 2 >>> c2.recv(10) # recv() stops at the old consumed OOB b'hellowo' # should be 'hellowol' manage_oob() should not stop recv() at the old consumed OOB skb if there is a new OOB data queued. Note that TCP behaviour is apparently wrong in this test case because we can recv() the same OOB data twice. Without fix: # RUN msg_oob.no_peek.ex_oob_ahead_break ... # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8) # ex_oob_ahead_break: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_ahead_break not ok 11 msg_oob.no_peek.ex_oob_ahead_break With fix: # RUN msg_oob.no_peek.ex_oob_ahead_break ... # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol # msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl # OK msg_oob.no_peek.ex_oob_ahead_break ok 11 msg_oob.no_peek.ex_oob_ahead_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.Kuniyuki Iwashima1-5/+44
While testing, I found some weird behaviour on the TCP side as well. For example, TCP drops the preceding OOB data when queueing a new OOB data if the old OOB data is at the head of recvq. # RUN msg_oob.no_peek.ex_oob_drop ... # msg_oob.c:146:ex_oob_drop:AF_UNIX :x # msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable # msg_oob.c:146:ex_oob_drop:AF_UNIX :y # msg_oob.c:147:ex_oob_drop:TCP :Invalid argument # OK msg_oob.no_peek.ex_oob_drop ok 9 msg_oob.no_peek.ex_oob_drop # RUN msg_oob.no_peek.ex_oob_drop_2 ... # msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x # msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable # OK msg_oob.no_peek.ex_oob_drop_2 ok 10 msg_oob.no_peek.ex_oob_drop_2 This patch allows AF_UNIX's MSG_OOB implementation to produce different results from TCP when operations are guarded with tcp_incompliant{}. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.Kuniyuki Iwashima2-4/+26
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags, >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX) >>> c1.send(b'hello', MSG_OOB) 5 >>> c1.send(b'world') 5 and its peer recv()s "hell" and "o". >>> c2.recv(10) b'hell' >>> c2.recv(1, MSG_OOB) b'o' Now the consumed OOB skb stays at the head of recvq to return a correct value for ioctl(SIOCATMARK), which is broken now and fixed by a later patch. Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL, so recv() ends up with -EAGAIN. >>> c2.setblocking(False) # This causes -EAGAIN even with available data >>> c2.recv(5) Traceback (most recent call last): File "<stdin>", line 1, in <module> BlockingIOError: [Errno 11] Resource temporarily unavailable However, next recv() will return the following available data, "world". >>> c2.recv(5) b'world' When the consumed OOB skb is at the head of the queue, we need to fetch the next skb to fix the weird behaviour. Note that the issue does not happen without MSG_DONTWAIT because we can retry after manage_oob(). This patch also adds a test case that covers the issue. Without fix: # RUN msg_oob.no_peek.ex_oob_break ... # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable # msg_oob.c:135:ex_oob_break:Expected:ld # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2) # ex_oob_break: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_break not ok 8 msg_oob.no_peek.ex_oob_break With fix: # RUN msg_oob.no_peek.ex_oob_break ... # OK msg_oob.no_peek.ex_oob_break ok 8 msg_oob.no_peek.ex_oob_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.Kuniyuki Iwashima2-5/+29
After consuming OOB data, recv() reading the preceding data must break at the OOB skb regardless of MSG_PEEK. Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is not compliant with TCP. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX) >>> c1.send(b'hello', MSG_OOB) 5 >>> c1.send(b'world') 5 >>> c2.recv(1, MSG_OOB) b'o' >>> c2.recv(9, MSG_PEEK) # This should return b'hell' b'hellworld' # even with enough buffer. Let's fix it by returning NULL for consumed skb and unlinking it only if MSG_PEEK is not specified. This patch also adds test cases that add recv(MSG_PEEK) before each recv(). Without fix: # RUN msg_oob.peek.oob_ahead_break ... # msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld # msg_oob.c:135:oob_ahead_break:Expected:hell # msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4) # oob_ahead_break: Test terminated by assertion # FAIL msg_oob.peek.oob_ahead_break not ok 13 msg_oob.peek.oob_ahead_break With fix: # RUN msg_oob.peek.oob_ahead_break ... # OK msg_oob.peek.oob_ahead_break ok 13 msg_oob.peek.oob_ahead_break Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Add msg_oob.c.Kuniyuki Iwashima2-1/+221
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found some bizarre behaviour. The new selftest validates every MSG_OOB operation against TCP as a reference implementation. This patch adds only a few tests with basic send() and recv() that do not fail. The following patches will add more test cases for SO_OOBINLINE, SIGURG, EPOLLPRI, and SIOCATMARK. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27selftest: af_unix: Remove test_unix_oob.c.Kuniyuki Iwashima3-438/+1
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality, thus there are discrepancies between TCP behaviour. Also, the test uses fork() to create message producer, and it's not easy to understand and add more test cases. Let's remove test_unix_oob.c and rewrite a new test. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()Yunseong Kim1-1/+1
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https://github.com/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https://github.com/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from 51270d573a8d. I think this patch is absolutely necessary. Previously, It was showing not intended string value of name. I've reproduced 3 time from my fedora 40 Debug Kernel with any other module or patched. version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug [ 5287.164555] veth0_vlan: left promiscuous mode [ 5287.164929] veth1_macvtap: left promiscuous mode [ 5287.164950] veth0_macvtap: left promiscuous mode [ 5287.164983] veth1_vlan: left promiscuous mode [ 5287.165008] veth0_vlan: left promiscuous mode [ 5287.165450] veth1_macvtap: left promiscuous mode [ 5287.165472] veth0_macvtap: left promiscuous mode [ 5287.165502] veth1_vlan: left promiscuous mode … [ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state [ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state [ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state [ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state [ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state [ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state [ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0 [ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state … [ 5298.002798] bridge_slave_0: left promiscuous mode [ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state [ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface [ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface [ 5298.320207] bond0 (unregistering): Released all slaves [ 5298.354296] hsr_slave_0: left promiscuous mode [ 5298.360750] hsr_slave_1: left promiscuous mode [ 5298.374889] veth1_macvtap: left promiscuous mode [ 5298.374931] veth0_macvtap: left promiscuous mode [ 5298.374988] veth1_vlan: left promiscuous mode [ 5298.375024] veth0_vlan: left promiscuous mode [ 5299.109741] team0 (unregistering): Port device team_slave_1 removed [ 5299.185870] team0 (unregistering): Port device team_slave_0 removed … [ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1 [ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9 [ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9 …. [ 5301.075531] team0: Port device team_slave_1 added [ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state [ 5301.085588] bridge_slave_0: entered allmulticast mode [ 5301.085800] bridge_slave_0: entered promiscuous mode [ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state … [ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.193481] hsr_slave_0: entered promiscuous mode [ 5301.204425] hsr_slave_1: entered promiscuous mode [ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.210185] Cannot create hsr debugfs directory [ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.255934] team0: Port device team_slave_0 added [ 5301.256480] team0: Port device team_slave_1 added [ 5301.256948] team0: Port device team_slave_0 added … [ 5301.435928] hsr_slave_0: entered promiscuous mode [ 5301.446029] hsr_slave_1: entered promiscuous mode [ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.455884] Cannot create hsr debugfs directory [ 5301.502664] hsr_slave_0: entered promiscuous mode [ 5301.513675] hsr_slave_1: entered promiscuous mode [ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.526164] Cannot create hsr debugfs directory [ 5301.563662] hsr_slave_0: entered promiscuous mode [ 5301.576129] hsr_slave_1: entered promiscuous mode [ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.580270] Cannot create hsr debugfs directory [ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137] [ 5301.595877] Mem abort info: [ 5301.595881] ESR = 0x0000000096000006 [ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits [ 5301.595889] SET = 0, FnV = 0 [ 5301.595893] EA = 0, S1PTW = 0 [ 5301.595896] FSC = 0x06: level 2 translation fault [ 5301.595900] Data abort info: [ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 5301.595915] [dfff800000000026] address between user and kernel address ranges [ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP … [ 5301.596076] CPU: 2 PID: 102769 Comm: syz-executor.3 Kdump: loaded Tainted: G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1 [ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 5301.596085] pc : strnlen+0x40/0x88 [ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596124] sp : ffff8000beef6b40 [ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001 [ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00 [ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140 [ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8 [ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006 [ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5 [ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec [ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200 [ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1 [ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130 [ 5301.596166] Call trace: [ 5301.596175] strnlen+0x40/0x88 [ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538 [ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0 [ 5301.596188] qdisc_reset+0x43c/0x5e8 [ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770 [ 5301.596194] veth_init_queues+0xfc/0x130 [veth] [ 5301.596198] veth_newlink+0x45c/0x850 [veth] [ 5301.596202] rtnl_newlink_create+0x2c8/0x798 [ 5301.596205] __rtnl_newlink+0x92c/0xb60 [ 5301.596208] rtnl_newlink+0xd8/0x130 [ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890 [ 5301.596214] netlink_rcv_skb+0x1c4/0x380 [ 5301.596225] rtnetlink_rcv+0x20/0x38 [ 5301.596227] netlink_unicast+0x3c8/0x640 [ 5301.596231] netlink_sendmsg+0x658/0xa60 [ 5301.596234] __sock_sendmsg+0xd0/0x180 [ 5301.596243] __sys_sendto+0x1c0/0x280 [ 5301.596246] __arm64_sys_sendto+0xc8/0x150 [ 5301.596249] invoke_syscall+0xdc/0x268 [ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240 [ 5301.596259] do_el0_svc+0x48/0x68 [ 5301.596261] el0_svc+0x50/0x188 [ 5301.596265] el0t_64_sync_handler+0x120/0x130 [ 5301.596268] el0t_64_sync+0x194/0x198 [ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842) [ 5301.596285] SMP: stopping secondary CPUs [ 5301.597053] Starting crashdump kernel... [ 5301.597057] Bye! After applying our patch, I didn't find any kernel panic errors. We've found a simple reproducer # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable # ip link add veth0 type veth peer name veth1 Error: Unknown device type. However, without our patch applied, I tested upstream 6.10.0-rc3 kernel using the qdisc_reset event and the ip command on my qemu virtual machine. This 2 commands makes always kernel panic. Linux version: 6.10.0-rc3 [ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty (paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024 Kernel panic message: [ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 615.237250] Dumping ftrace buffer: [ 615.237679] (ftrace buffer empty) [ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6 Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6 8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0 1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08 615.252376] Hardware name: linux,dummy-virt (DT) [ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 615.254433] pc : strnlen+0x6c/0xe0 [ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.256088] sp : ffff800080b269a0 [ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27: 0000000000000001 [ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24: ffffc070f619cf60 [ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21: dfff800000000000 [ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18: ffffc070f448b800 [ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15: ffffc070f4ba2a90 [ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12: 1ffff00010164d72 [ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 : ffffc070e85d6184 [ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 : 000000001504a6d3 [ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 : 0000000000000000 [ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 : 0000000000000000 [ 615.268747] Call trace: [ 615.269180] strnlen+0x6c/0xe0 [ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8 [ 615.271667] __traceiter_qdisc_reset+0xa0/0x140 [ 615.272499] qdisc_reset+0x554/0x848 [ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8 [ 615.274050] veth_init_queues+0x110/0x220 [veth] [ 615.275110] veth_newlink+0x538/0xa50 [veth] [ 615.276172] __rtnl_newlink+0x11e4/0x1bc8 [ 615.276944] rtnl_newlink+0xac/0x120 [ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370 [ 615.278409] netlink_rcv_skb+0x25c/0x4f0 [ 615.279122] rtnetlink_rcv+0x48/0x70 [ 615.279769] netlink_unicast+0x5a8/0x7b8 [ 615.280462] netlink_sendmsg+0xa70/0x1190 Yeoreum and I don't know if the patch we wrote will fix the underlying cause, but we think that priority is to prevent kernel panic happening. So, we're sending this patch. Fixes: 51270d573a8d ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string") Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/ Cc: netdev@vger.kernel.org Tested-by: Yunseong Kim <yskelg@gmail.com> Signed-off-by: Yunseong Kim <yskelg@gmail.com> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27Merge branch 'series-to-deliver-ethernet-for-stm32mp25'Paolo Abeni2-4/+84
Christophe Roullier says: ==================== Series to deliver Ethernet for STM32MP25 STM32MP25 is STM32 SOC with 2 GMACs instances. GMAC IP version is SNPS 5.3x. GMAC IP configure with 2 RX and 4 TX queue. DMA HW capability register supported RX Checksum Offload Engine supported TX Checksum insertion supported Wake-Up On Lan supported TSO supported ==================== Link: https://lore.kernel.org/r/20240624071052.118042-1-christophe.roullier@foss.st.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27net: stmmac: dwmac-stm32: stm32: add management of stm32mp25 for stm32Christophe Roullier1-3/+77
Add Ethernet support for STM32MP25. STM32MP25 is STM32 SOC with 2 GMACs instances. GMAC IP version is SNPS 5.3x. GMAC IP configure with 2 RX and 4 TX queue. DMA HW capability register supported RX Checksum Offload Engine supported TX Checksum insertion supported Wake-Up On Lan supported TSO supported Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27dt-bindings: net: add STM32MP25 compatible in documentation for stm32Christophe Roullier1-1/+7
New STM32 SOC have 2 GMACs instances. GMAC IP version is SNPS 5.30 Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-27Merge branch 'selftests-drv-net-rss_ctx-add-tests-for-rss-contexts'Jakub Kicinski6-15/+457
Jakub Kicinski says: ==================== selftests: drv-net: rss_ctx: add tests for RSS contexts Add a few tests exercising RSS context API. In addition to basic sanity checks, tests add RSS contexts, n-tuple rule to direct traffic to them (based on dst port), and qstats to make sure traffic landed where we expected. v2 adds a test for removing contexts out of order. When testing bnxt - either the new test or running more tests after the overlap test makes the device act strangely. To the point where it may start giving out ntuple IDs of 0 for all rules.. $ export NETIF=eth0 REMOTE_... $ ./drivers/net/hw/rss_ctx.py KTAP version 1 1..8 ok 1 rss_ctx.test_rss_key_indir ok 2 rss_ctx.test_rss_context ok 3 rss_ctx.test_rss_context4 # Increasing queue count 44 -> 66 # Failed to create context 32, trying to test what we got ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32 ok 5 rss_ctx.test_rss_context_overlap ok 6 rss_ctx.test_rss_context_overlap2 # .. sprays traffic like a headless chicken .. not ok 7 rss_ctx.test_rss_context_out_of_order ok 8 rss_ctx.test_rss_context4_create_with_cfg # Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0 v2: https://lore.kernel.org/all/20240625010210.2002310-1-kuba@kernel.org v1: https://lore.kernel.org/all/20240620232902.1343834-1-kuba@kernel.org ==================== Link: https://patch.msgid.link/20240626012456.2326192-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: rss_ctx: add tests for RSS configuration and contextsJakub Kicinski5-5/+399
Add tests focusing on indirection table configuration and creating extra RSS contexts in drivers which support it. $ export NETIF=eth0 REMOTE_... $ ./drivers/net/hw/rss_ctx.py KTAP version 1 1..8 ok 1 rss_ctx.test_rss_key_indir ok 2 rss_ctx.test_rss_context ok 3 rss_ctx.test_rss_context4 # Increasing queue count 44 -> 66 # Failed to create context 32, trying to test what we got ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32 ok 5 rss_ctx.test_rss_context_overlap ok 6 rss_ctx.test_rss_context_overlap2 # .. sprays traffic like a headless chicken .. not ok 7 rss_ctx.test_rss_context_out_of_order ok 8 rss_ctx.test_rss_context4_create_with_cfg # Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0 Note that rss_ctx.test_rss_context_out_of_order fails with the device I tested with, but it seems to be a device / driver bug. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: add ability to wait for at least N packets to load genJakub Kicinski1-7/+23
Teach the load generator how to wait for at least given number of packets to be received. This will be useful for filtering where we'll want to send a non-trivial number of packets and make sure they landed in right queues. Reviewed-by: Breno Leitao <leitao@debian.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: add helper to wait for HW stats to syncJakub Kicinski2-1/+22
Some devices DMA stats to the host periodically. Add a helper which can wait for that to happen, based on frequency reported by the driver in ethtool. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27selftests: drv-net: try to check if port is in useJakub Kicinski1-2/+13
We use random ports for communication. As Willem predicted this leads to occasional failures. Try to check if port is already in use by opening a socket and binding to that port. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626012456.2326192-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of ↵Linus Torvalds20-53/+117
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "13 hotfixes, 7 are cc:stable. All are MM related apart from a MAINTAINERS update. There is no identifiable theme here - just singleton patches in various places" * tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/memory: don't require head page for do_set_pmd() mm/page_alloc: Separate THP PCP into movable and non-movable categories nfs: drop the incorrect assertion in nfs_swap_rw() mm/migrate: make migrate_pages_batch() stats consistent MAINTAINERS: TPM DEVICE DRIVER: update the W-tag selftests/mm:fix test_prctl_fork_exec return failure mm: convert page type macros to enum ocfs2: fix DIO failure due to insufficient transaction credits kasan: fix bad call to unpoison_slab_object mm: handle profiling for fake memory allocations during compaction mm/slab: fix 'variable obj_exts set but not used' warning /proc/pid/smaps: add mseal info for vma mm: fix incorrect vbq reference in purge_fragmented_block
2024-06-27netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registersPablo Neira Ayuso3-5/+11
register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers. Fixes: 96518518cc41 ("netfilter: add nftables") Reported-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-27Merge tag 'wq-for-6.10-rc5-fixes' of ↵Linus Torvalds2-18/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Two patches to fix kworker name formatting" * tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Increase worker desc's length to 32 workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
2024-06-26Merge tag 'asoc-fix-v6.10-rc5' of ↵Takashi Iwai299-1805/+3235
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.10 A relatively large batch of updates, largely due to the long interval since I last sent fixes due to various travel and holidays. There's a lot of driver specific fixes and quirks in here, none of them too major, and also some fixes for recently introduced memory safety issues in the topology code.
2024-06-26MAINTAINERS: wifi: update ath.git locationKalle Valo1-4/+4
ath.git tree has moved to a new location. The old location will be an alias to the new location and will work at least until end of 2024, but best to update git trees already now. Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240626102632.1554485-1-kvalo@kernel.org
2024-06-26MAINTAINERS: Remembering Larry FingerKalle Valo2-4/+5
We got sad news that Larry is not with us anymore. He was a long time Linux developer, his first commit was back in 2005 and he has maintained several wireless drivers over the years. He was known for patiently supporting Linux users with all sorts of problems they had. Larry's work helped so many people around the world and I always enjoyed working with him, even though I sadly never met him. Rest in Peace, Larry. You will be missed. Link: https://lore.kernel.org/all/77997185-86a6-41c5-af7a-74e4e9064437@lwfinger.net/ Link: https://arstechnica.com/gadgets/2024/06/larry-finger-linux-wireless-hero-was-a-persistent-patient-coder-and-mentor/ Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240625103929.1332926-1-kvalo@kernel.org
2024-06-26ASoC: rt5645: fix issue of random interrupt from push-buttonJack Yu2-6/+24
Modify register setting sequence of enabling inline command to fix issue of random interrupt from push-button. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-26ALSA: seq: Fix missing MSB in MIDI2 SPP conversionTakashi Iwai1-1/+1
The conversion of SPP to MIDI2 UMP called a wrong function, and the secondary argument wasn't taken. As a result, MSB of SPP was always zero. Fix to call the right function. Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events") Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-26Merge branch 'mlxsw-reduce-memory-footprint-of-mlxsw-driver'Jakub Kicinski1-34/+149
Petr Machata says: ==================== mlxsw: Reduce memory footprint of mlxsw driver Amit Cohen writes: A previous patch-set used page pool to allocate buffers, to simplify the change, we first used one continuous buffer, which was allocated with order > 0. This set improves page pool usage to allocate the exact number of pages which are required for packet. This change requires using fragmented SKB, till now all the buffer was in the linear part. Note that 'skb->truesize' is decreased for small packets. This set significantly reduces memory consumption of mlxsw driver. The footprint is reduced by 26%. Patch set overview: Patch #1 calculates number of scatter/gather entries and stores the value Patch #2 converts the driver to use fragmented buffers ==================== Link: https://patch.msgid.link/cover.1719321422.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26mlxsw: pci: Use fragmented buffersAmit Cohen1-34/+129
WQE (Work Queue Element) includes 3 scatter/gather entries for buffers. The buffer can be split into 3 parts, software should set address and byte count of each part. A previous patch-set used page pool to allocate buffers, to simplify the change, we first used one continuous buffer, which was allocated with order > 0. This patch improves page pool usage to allocate the exact number of pages which are required for packet. As part of init, fill WQE.address[x] and WQE.byte_count* with pages which are allocated from the pool. Fill x entries according to number of scatter/gather entries which are required for maximum packet size. When a packet is received, check the actual size and replace only the used pages. Save bytes for software overhead only as part of the first entry. This change also requires using fragmented SKB, till now all the buffer was in the linear part. Note that 'skb->truesize' is decreased for small packets. For now the maximum buffer size is 3 * PAGE_SIZE which is enough, in case that the driver will support larger MTU, we can use 'order' to allocate more than one page per scatter/gather entry. This change significantly reduces memory consumption of mlxsw driver. The footprint is reduced by 26%. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/ee38898c692e7f644a7f3ea4d33aeddb4dd917d2.1719321422.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26mlxsw: pci: Store number of scatter/gather entries for maximum packet sizeAmit Cohen1-0/+20
A previous patch-set used page pool for Rx buffers allocations. To simplify the change, we first used page pool for one allocation per packet - one continuous buffer is allocated for each packet. This can be improved by using fragmented buffers, then memory consumption will be significantly reduced. WQE (Work Queue Element) includes up to 3 scatter/gather entries for data. As preparation for fragmented buffer usage, calculate number of scatter/gather entries which are required for packet according to maximum MTU and store it for future use. For now use PAGE_SIZE for each entry, which means that maximum buffer size is 3 * PAGE_SIZE. This is enough for the maximum MTU which is supported in the driver now (10K). Warn in an unlikely case of maximum MTU which requires more than 3 pages, for now this warn should not happen with standard page size (>=4K) and maximum MTU (10K). Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/98c3e3adb7e727e571ac538faf67cef262cec4fc.1719321422.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König7-13/+13
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For mlxsw Reviewed-by: Kory Maincent <Kory.maincent@bootlin.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> # for mctp-i2c Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: usb: qmi_wwan: add Telit FN912 compositionsDaniele Palmas1-0/+2
Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26ASoC: amd: yc: Fix non-functional mic on ASUS M5602RAVyacheslav Frantsishko1-0/+7
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly. Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-26wifi: mac80211: disable softirqs for queued frame handlingJohannes Berg2-0/+3
As noticed by syzbot, calling ieee80211_handle_queued_frames() (and actually handling frames there) requires softirqs to be disabled, since we call into the RX code. Fix that in the case of cleaning up frames left over during shutdown. Fixes: 177c6ae9725d ("wifi: mac80211: handle tasklet frames before stopping") Reported-by: syzbot+1d516edf1e74469ba5d3@syzkaller.appspotmail.com Link: https://patch.msgid.link/20240626091559.cd6f08105a6e.I74778610a5ff2cf8680964698131099d2960352a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM valuesEric Dumazet1-1/+5
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137 ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:450 [inline] NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314 mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650 process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:3429 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.Dirk Su1-0/+3
HP EliteBook 645/665 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mic-mute/audio-mute working. Signed-off-by: Dirk Su <dirk.su@canonical.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240626021437.77039-1-dirk.su@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-26ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820Takashi Iwai1-1/+20
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry, and this eventually breaks the existing quirk for Lenovo Yoga Duet 7 13ITL6 equipped with the same PCI SSID 17aa:3820. For applying a proper quirk for each model, check the codec SSID additionally. Fortunately Yoga Duet has a different codec SSID, 0x17aa3802. (Interestingly, 17aa:3802 has another conflict of SSID between another Yoga model vs 14IRP8 which we had to work around similarly.) Fixes: b1fd0d1285b1 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM") Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-26Merge branch 'add-ethernet-driver-for-tehuti-networks-tn40xx-chips'Jakub Kicinski9-1/+2508
FUJITA Tomonori says: ==================== add ethernet driver for Tehuti Networks TN40xx chips This patchset adds a new 10G ethernet driver for Tehuti Networks TN40xx chips. Note in mainline, there is a driver for Tehuti Networks (drivers/net/ethernet/tehuti/tehuti.[hc]), which supports TN30xx chips. Multiple vendors (DLink, Asus, Edimax, QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks went out of business but the drivers are still distributed under GPL2 with some of the hardware (and also available on some sites). With some changes, I try to upstream this driver with a new PHY driver in Rust. The major change is replacing the PHY abstraction layer in the original driver with phylink. TN40xx chips are used with various PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and MV88E2010). I've also been working on a new PHY driver for QT2025 in Rust [1]. For now, I enable only adapters using QT2025 PHY in the PCI ID table of this driver. I've tested this driver and the QT2025 PHY driver with Edimax EN-9320 10G adapter and 10G-SR SFP+. In mainline, there are PHY drivers for AQR105 and Marvell PHYs, which could work for some TN40xx adapters with this driver. To make reviewing easier, this patchset has only basic functions. Once merged, I'll submit features like ethtool support. v11: https://lore.kernel.org/netdev/20240618051608.95208-7-fujita.tomonori@gmail.com/ v10: https://lore.kernel.org/netdev/20240611045217.78529-7-fujita.tomonori@gmail.com/ v9: https://lore.kernel.org/netdev/20240605232608.65471-1-fujita.tomonori@gmail.com/ v8: https://lore.kernel.org/netdev/20240603064955.58327-1-fujita.tomonori@gmail.com/ v7: https://lore.kernel.org/netdev/20240527203928.38206-7-fujita.tomonori@gmail.com/ v6: https://lore.kernel.org/netdev/20240512085611.79747-2-fujita.tomonori@gmail.com/ v5: https://lore.kernel.org/netdev/20240508113947.68530-1-fujita.tomonori@gmail.com/ v4: https://lore.kernel.org/netdev/20240501230552.53185-1-fujita.tomonori@gmail.com/ v3: https://lore.kernel.org/netdev/20240429043827.44407-1-fujita.tomonori@gmail.com/ v2: https://lore.kernel.org/netdev/20240425010354.32605-1-fujita.tomonori@gmail.com/ v1: https://lore.kernel.org/netdev/20240415104352.4685-1-fujita.tomonori@gmail.com/ [1] https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/ ==================== Link: https://patch.msgid.link/20240623235507.108147-1-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: tn40xx: add phylink supportFUJITA Tomonori5-4/+114
This patch adds supports for multiple PHY hardware with phylink. The adapters with TN40xx chips use multiple PHY hardware; AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120, 88X3310, and MV88E2010. For now, the PCI ID table of this driver enables adapters using only QT2025 PHY. I've tested this driver and the QT2025 PHY driver (SFP+ 10G SR) with Edimax EN-9320 10G adapter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Hans-Frieder Vogt <hfdevel@gmx.net> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20240623235507.108147-8-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: tn40xx: add mdio bus supportFUJITA Tomonori3-1/+147
This patch adds supports for mdio bus. A later path adds PHYLIB support on the top of this. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20240623235507.108147-7-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: tn40xx: add basic Rx handlingFUJITA Tomonori3-1/+508
This patch adds basic Rx handling. The Rx logic uses three major data structures; two ring buffers with NIC and one database. One ring buffer is used to send information to NIC about memory to be stored packets to be received. The other is used to get information from NIC about received packets. The database is used to keep the information about DMA mapping. After a packet arrived, the db is used to pass the packet to the network stack. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Hans-Frieder Vogt <hfdevel@gmx.net> Link: https://patch.msgid.link/20240623235507.108147-6-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26net: tn40xx: add basic Tx handlingFUJITA Tomonori3-0/+1411
This patch adds device specific structures to initialize the hardware with basic Tx handling. The original driver loads the embedded firmware in the header file. This driver is implemented to use the firmware APIs. The Tx logic uses three major data structures; two ring buffers with NIC and one database. One ring buffer is used to send information about packets to be sent for NIC. The other is used to get information from NIC about packet that are sent. The database is used to keep the information about DMA mapping. After a packet is sent, the db is used to free the resource used for the packet. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20240623235507.108147-5-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-13 05:27:03 +0300