summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-09-06Merge branch 'for_linus' of ↵Linus Torvalds22-445/+609
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3, reiserfs, udf & isofs fixes from Jan Kara: "The contains a bunch of ext3 cleanups and minor improvements, major reiserfs locking changes which should hopefully fix deadlocks introduced by BKL removal, and udf/isofs changes to refuse mounting fs rw instead of mounting it ro automatically which makes eject button work as expected for all media (see the changelog for why userspace should be ok with this change)" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: jbd: use a single printk for jbd_debug() reiserfs: locking, release lock around quota operations reiserfs: locking, handle nested locks properly reiserfs: locking, push write lock out of xattr code jbd: relocate assert after state lock in journal_commit_transaction() udf: Refuse RW mount of the filesystem instead of making it RO udf: Standardize return values in mount sequence isofs: Refuse RW mount of the filesystem instead of making it RO ext3: allow specifying external journal by pathname mount option jbd: remove unneeded semicolon
2013-09-06Merge tag 'for-f2fs-3.12' of ↵Linus Torvalds21-344/+890
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches: - support inline xattrs - add sysfs support to control GCs explicitly - add proc entry to show the current segment usage information - improve the GC/SSR performance The other bug fixes are as follows: - avoid the overflow on status calculation - fix some error handling routines - fix inconsistent xattr states after power-off-recovery - fix incorrect xattr node offset definition - fix deadlock condition in fsync - fix the fdatasync routine for power-off-recovery" * tag 'for-f2fs-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits) f2fs: optimize gc for better performance f2fs: merge more bios of node block writes f2fs: avoid an overflow during utilization calculation f2fs: trigger GC when there are prefree segments f2fs: use strncasecmp() simplify the string comparison f2fs: fix omitting to update inode page f2fs: support the inline xattrs f2fs: add the truncate_xattr_node function f2fs: introduce __find_xattr for readability f2fs: reserve the xattr space dynamically f2fs: add flags for inline xattrs f2fs: fix error return code in init_f2fs_fs() f2fs: fix wrong BUG_ON condition f2fs: fix memory leak when init f2fs filesystem fail f2fs: fix a compound statement label error f2fs: avoid writing inode redundantly when creating a file f2fs: alloc_page() doesn't return an ERR_PTR f2fs: should cover i_xattr_nid with its xattr node page lock f2fs: check the free space first in new_node_page f2fs: clean up the needless end 'return' of void function ...
2013-09-06Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds103-1343/+1590
Pull ARM updates from Russell King: "This set includes adding support for Neon acceleration of RAID6 XOR code from Ard Biesheuvel, cache flushing and barrier updates from Will Deacon, and a cleanup to the ARM debug code which reduces the amount of code by about 500 lines. A few other cleanups, such as constifying the machine descriptors which already shouldn't be written to, cleaning up the printing of the L2 cache size" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits) ARM: 7826/1: debug: support debug ll on hisilicon soc ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines ARM: 7827/1: highbank: fix debug uart virtual address for LPAE ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022 ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port ARM: debug: move SPEAr debug to generic PL01x code ARM: debug: move davinci debug to generic 8250 code ARM: debug: move keystone debug to generic 8250 code ARM: debug: remove DEBUG_ROCKCHIP_UART ARM: debug: provide generic option choices for 8250 and PL01x ports ARM: debug: move PL01X debug include into arch/arm/include/debug/ ARM: debug: provide PL01x debug uart phys/virt address configuration options ARM: debug: add support for word accesses to debug/8250.S ARM: debug: move 8250 debug include into arch/arm/include/debug/ ARM: debug: provide 8250 debug uart phys/virt address configuration options ARM: debug: provide 8250 debug uart register shift configuration option ARM: debug: provide 8250 debug uart flow control configuration option ...
2013-09-06net: stmmac: fix bad merge conflict resolutionOlof Johansson1-0/+1
Merge commit 06c54055bebf did a bad conflict resolution accidentally leaving out a closing brace. Add it back. This breaks a handful of defconfigs on ARM, so it'd be good to see it applied pretty quickly. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds7-11/+13
Pull IDE changes from David Miller: "Mostly cleanups, and changes part of tree-wide adjustments, this code is in deep freeze so that's pretty much what we expect these days" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: sgiioc4: Staticize ioc4_ide_attach_one() ide: palm_bk3710: add missing __iomem annotation ide: use dev_get_platdata() ide-disk_proc: use macro to replace magic number ide: replace strict_strtol() with kstrtol()
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds13-35/+49
Pull sparc changes from David Miller: "Several bug fixes (from Kirill Tkhai, Geery Uytterhoeven, and Alexey Dobriyan) and some support for Fujitsu sparc64x chips (from Allen Pais)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Export flush_ptrace_access() (needed by lustre) sparc: fix PCI device proc file mmap(2) sparc64: Remove RWSEM export leftovers sparc64: Fix off by one in trampoline TLB mapping installation loop. sparc64: Fix ITLB handler of null page esp_scsi: Fix tag state corruption when autosensing. sparc64: Fix not SRA'ed %o5 in 32-bit traced syscall sparc64: cleanup: Rename ret_from_syscall to ret_from_fork sparc32: Fix exit flag passed from traced sys_sigreturn sparc64: Fix wrong syscall return value passed to trace_sys_exit() support sparc64x chip type in cpumap.c cpu hw caps support for sparc64x
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds974-23917/+56727
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05openvswitch: Fix alignment of struct sw_flow_key.Jesse Gross2-1/+2
sw_flow_key alignment was declared as " __aligned(__alignof__(long))". However, this breaks on the m68k architecture where long is 32 bit in size but 16 bit aligned by default. This aligns to the size of a long to ensure that we can always do comparsions in full long-sized chunks. It also adds an additional build check to catch any reduction in alignment. CC: Andy Zhou <azhou@nicira.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cputime fix from Ingo Molnar: "This fixes a longer-standing cputime accounting bug that Stanislaw Gruszka finally managed to track down" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Do not scale when utime == 0
2013-09-05Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix for the annoying paravirt.o build warning under allmodconfig, and a MAINTAINERS file update" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Add an entry in MAINTAINERS for arch/x86/kernel/cpu/vmware.c x86, paravirt: Remove duplicate definition for DEF_NATIVE
2013-09-05ide: sgiioc4: Staticize ioc4_ide_attach_one()Jingoo Han1-1/+1
ioc4_ide_attach_one() is used only in this file. Fix the following sparse warnings: drivers/ide/sgiioc4.c:603:5: warning: symbol 'ioc4_ide_attach_one' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ide: palm_bk3710: add missing __iomem annotationJingoo Han1-2/+2
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/ide/palm_bk3710.c:194:31: warning: incorrect type in initializer (different address spaces) drivers/ide/palm_bk3710.c:194:31: expected void [noderef] <asn:2>*base drivers/ide/palm_bk3710.c:194:31: got void *<noident> drivers/ide/palm_bk3710.c:212:31: warning: incorrect type in initializer (different address spaces) drivers/ide/palm_bk3710.c:212:31: expected void [noderef] <asn:2>*base drivers/ide/palm_bk3710.c:212:31: got void *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ide: use dev_get_platdata()Jingoo Han3-4/+4
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ide-disk_proc: use macro to replace magic numberXinghai Yu1-2/+2
Signed-off-by: Xinghai Yu <yuxinghai@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ide: replace strict_strtol() with kstrtol()Jingoo Han1-2/+4
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05sparc64: Export flush_ptrace_access() (needed by lustre)Geert Uytterhoeven1-0/+2
ERROR: "flush_ptrace_access" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05sparc: fix PCI device proc file mmap(2)Alexey Dobriyan1-0/+16
Commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba "Fix rmmod/read/write races in /proc entries" must have broken mmapping of PCI device proc files on Sparc. Notice how it adds wrapper around ->mmap but doesn't do it around ->get_unmapped_area. Add wrapper around ->get_unmapped_area. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05sparc64: Remove RWSEM export leftoversKirill Tkhai1-9/+0
The functions __down_read __down_read_trylock __down_write __down_write_trylock __up_read __up_write __downgrade_write are implemented inline, so remove corresponding EXPORT_SYMBOLs (They lead to compile errors on RT kernel). Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller143-684/+1483
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds216-2620/+18946
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05netfilter: Fix build errors with xt_socket.cDavid S. Miller1-0/+1
As reported by Randy Dunlap: ==================== when CONFIG_IPV6=m and CONFIG_NETFILTER_XT_MATCH_SOCKET=y: net/built-in.o: In function `socket_mt6_v1_v2': xt_socket.c:(.text+0x51b55): undefined reference to `udp6_lib_lookup' net/built-in.o: In function `socket_mt_init': xt_socket.c:(.init.text+0x1ef8): undefined reference to `nf_defrag_ipv6_enable' ==================== Like several other modules under net/netfilter/ we have to have a dependency "IPV6 disabled or set compatibly with this module" clause. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05tcp: Add missing braces to do_tcp_setsockoptDave Jones1-1/+2
Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05caif: Add missing braces to multiline if in cfctrl_linkup_requestDave Jones1-1/+2
The indentation here implies this was meant to be a multi-line if. Introduced several years back in commit c85c2951d4da1236e32f1858db418221e624aba5 ("caif: Handle dev_queue_xmit errors.") Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bnx2x: Add missing braces in bnx2x:bnx2x_link_initializeDave Jones1-1/+2
The indentation here implies that the intent was for this to be a multiline if. Introduced a few years ago in commit ec146a6f019923819f5ca381980248b6d154ca1a ("bnx2x: Modify XGXS functions") Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05vxlan: Fix kernel panic on device delete.Pravin B Shelar1-1/+2
On vxlan device create if socket create fails vxlan device is not added to hash table. Therefore we need to check if device is in hashtable before we delete it from hlist. Following patch avoid the crash. net-next already has this fix. ---8<--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa05f9ca7>] vxlan_dellink+0x77/0xf0 [vxlan] PGD 42b2d9067 PUD 42e04c067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: vxlan(-) Hardware name: Dell Inc. PowerEdge R620/0KCKR5, BIOS 1.4.8 10/25/2012 task: ffff88042ecf8760 ti: ffff88042f106000 task.ti: ffff88042f106000 RIP: 0010:[<ffffffffa05f9ca7>] [<ffffffffa05f9ca7>] vxlan_dellink+0x77/0xf0 [vxlan] RSP: 0018:ffff88042f107e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88082af08000 RCX: ffff88083fd80000 RDX: 0000000000000000 RSI: ffff88042f107e58 RDI: ffff88042e12f810 RBP: ffff88042f107e48 R08: ffffffff8166eca0 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88082af087c0 R13: ffff88042e12f000 R14: ffff88042f107e58 R15: ffff88042f107e58 FS: 00007f4ed2de7700(0000) GS:ffff88043fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000042e076000 CR4: 00000000000407e0 Stack: ffff88082af08000 ffffffff81654848 ffffffffa05fb4e0 ffffffff81654780 ffff88042f107e98 ffffffff813b9c7a ffff88042f107e58 ffff88042f107e58 ffff88042f107e88 ffffffffa05fb4e0 ffffffffa05fb780 ffff88042f107f18 Call Trace: [<ffffffff813b9c7a>] __rtnl_link_unregister+0xca/0xd0 [<ffffffff813bb0e9>] rtnl_link_unregister+0x19/0x30 [<ffffffffa05faa4c>] vxlan_cleanup_module+0x10/0x2f [vxlan] [<ffffffff81099fef>] SyS_delete_module+0x1cf/0x2c0 [<ffffffff8146c069>] ? do_page_fault+0x9/0x10 [<ffffffff8146f012>] system_call_fastpath+0x16/0x1b Code: 4d 85 ed 0f 84 95 00 00 00 4c 8d a7 c0 07 00 00 49 8d bd 10 08 00 00 e8 28 e8 e6 e0 48 8b 83 c0 07 00 00 49 8b 54 24 08 48 85 c0 <48> 89 02 74 04 48 89 50 08 49 b8 00 02 20 00 00 00 ad de 4d 89 RIP [<ffffffffa05f9ca7>] vxlan_dellink+0x77/0xf0 [vxlan] RSP <ffff88042f107e28> CR2: 0000000000000000 Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctlsThomas Petazzoni1-0/+16
This commit implements the ->ndo_do_ioctl() operation so that the PHY-related ioctl() calls can work from userspace, which allows applications like mii-tool or mii-diag to do their job. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05net: mvneta: properly disable HW PHY polling and ensure adjust_link() worksThomas Petazzoni1-1/+12
This commit fixes a long-standing bug that has been reported by many users: on some Armada 370 platforms, only the network interface that has been used in U-Boot to tftp the kernel works properly in Linux. The other network interfaces can see a 'link up', but are unable to transmit data. The reports were generally made on the Armada 370-based Mirabox, but have also been given on the Armada 370-RD board. The network MAC in the Armada 370/XP (supported by the mvneta driver in Linux) has a functionality that allows it to continuously poll the PHY and directly update the MAC configuration accordingly (speed, duplex, etc.). The very first versions of the driver submitted for review were using this hardware mechanism, but due to this, the driver was not integrated with the kernel phylib. Following reviews, the driver was changed to use the phylib, and therefore a software based polling. In software based polling, Linux regularly talks to the PHY over the MDIO bus, and sees if the link status has changed. If it's the case then the adjust_link() callback of the driver is called to update the MAC configuration accordingly. However, it turns out that the adjust_link() callback was not configuring the hardware in a completely correct way: while it was setting the speed and duplex bits correctly, it wasn't telling the hardware to actually take into account those bits rather than what the hardware-based PHY polling mechanism has concluded. So, in fact the adjust_link() callback was basically a no-op. However, the network happened to be working because on the network interfaces used by U-Boot for tftp on Armada 370 platforms because the hardware PHY polling was enabled by the bootloader, and left enabled by Linux. However, the second network interface not used for tftp (or both network interfaces if the kernel is loaded from USB, NAND or SD card) didn't had the hardware PHY polling enabled. This patch fixes this situation by: (1) Making sure that the hardware PHY polling is disabled by clearing the MVNETA_PHY_POLLING_ENABLE bit in the MVNETA_UNIT_CONTROL register in the driver ->probe() function. (2) Making sure that the duplex and speed selections made by the adjust_link() callback are taken into account by clearing the MVNETA_GMAC_AN_SPEED_EN and MVNETA_GMAC_AN_DUPLEX_EN bits in the MVNETA_GMAC_AUTONEG_CONFIG register. This patch has been tested on Armada 370 Mirabox, and now both network interfaces are usable after boot. [ Problem introduced by commit c5aff18 ("net: mvneta: driver for Marvell Armada 370/XP network unit") ] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Jochen De Smet <jochen.armkernel@leahnim.org> Cc: Peter Sanford <psanford@nearbuy.io> Cc: Ethan Tuttle <ethan@ethantuttle.com> Cc: Chény Yves-Gael <yves@cheny.fr> Cc: Ryan Press <ryan@presslab.us> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: vdonnefort@lacie.com Cc: stable@vger.kernel.org Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Tested-by: Yves-Gael Cheny <yves@cheny.fr> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05icplus: Use netif_running to determine device stateJon Mason1-1/+1
Remove the __LINK_STATE_START check to verify the device is running, in favor of netif_running(). netif_running() performs the same check of __LINK_STATE_START, so the code should behave the same. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Sorbica Shieh <sorbica@icplus.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ethernet/arc/arc_emac: Fix huge delays in large file copiesVineet Gupta1-2/+2
copying large files to a NFS mounted host was taking absurdly large time. Turns out that TX BD reclaim had a sublte bug. Loop starts off from @txbd_dirty cursor and stops when it hits a BD still in use by controller. However when it stops it needs to keep the cursor at that very BD to resume scanning in next iteration. However it was erroneously incrementing the cursor, causing the next scan(s) to fail too, unless the BD chain was completely drained out. [ARCLinux]$ ls -l -sh /disk/log.txt 17976 -rw-r--r-- 1 root root 17.5M Sep /disk/log.txt ========== Before ===================== [ARCLinux]$ time cp /disk/log.txt /mnt/. real 31m 7.95s user 0m 0.00s sys 0m 0.10s ========== After ===================== [ARCLinux]$ time cp /disk/log.txt /mnt/. real 0m 24.33s user 0m 0.00s sys 0m 0.19s Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> (commit_signer:3/4=75%) Cc: "David S. Miller" <davem@davemloft.net> (commit_signer:3/4=75%) Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: arc-linux-dev@synopsys.com Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds435-17151/+49887
Pull drm tree changes from Dave Airlie: "This is the main drm pull request, I have some overlap with sound and arm-soc, the sound patch is acked and may conflict based on -next reports but should be a trivial fixup, which I'll leave to you! Highlights: - new drivers: MSM driver from Rob Clark - non-drm: switcheroo and hdmi audio driver support for secondary GPU poweroff, so drivers can use runtime PM to poweroff the GPUs. This can save 5 or 6W on some optimus laptops. - drm core: combined GEM and TTM VMA manager per-filp mmap permission tracking initial rendernode support (via a runtime enable for now, until we get api stable), remove old proc support, lots of cleanups of legacy code hdmi vendor infoframes and 4k modes lots of gem/prime locking and races fixes async pageflip scaffolding drm bridge objects - i915: Haswell PC8+ support and eLLC support, HDMI 4K support, initial per-process VMA pieces, watermark reworks, convert to generic hdmi infoframes, encoder reworking, fastboot support, - radeon: CIK PM support, remove 3d blit code in favour of DMA engines, Berlin GPU support, HDMI audio fixes - nouveau: secondary GPU power down support for optimus laptops, lots of fixes, use MSI, VP3 engine support - exynos: runtime pm support for g2d, DT support, remove non-DT, - tda998x i2c driver: lots of fixes for sync issues - gma500: lots of cleanups - rcar: add LVDS support, fbdev emulation, - tegra: just minor fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits) drm/exynos: Fix build error with exynos_drm_connector.c drm/exynos: Remove non-DT support in exynos_drm_fimd drm/exynos: Remove non-DT support in exynos_hdmi drm/exynos: Remove non-DT support in exynos_drm_g2d drm/exynos: Remove non-DT support in exynos_hdmiphy drm/exynos: Remove non-DT support in exynos_ddc drm/exynos: Make Exynos DRM drivers depend on OF drm/exynos: Consider fallback option to allocation fail drm/exynos: fimd: move platform data parsing to separate function drm/exynos: fimd: get signal polarities from device tree drm/exynos: fimd: replace struct fb_videomode with videomode drm/exynos: check a pixel format to a particular window layer drm/exynos: fix fimd pixel format setting drm/exynos: Add NULL pointer check drm/exynos: Remove redundant error messages drm/exynos: Add missing of.h header include drm/exynos: Remove redundant NULL check in exynos_drm_buf drm/exynos: add device tree support for rotator drm/exynos: Add missing includes drm/exynos: add runtime pm interfaces to g2d driver ...
2013-09-05Merge tag 'fbdev-3.12' of ↵Linus Torvalds19-285/+542
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used eg in BeagleBone - Himax HX8369 controller support - Various small fixes and cleanups * tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits) video: da8xx-fb: fix the polarities of the hsync/vsync pulse video: da8xx-fb: support lcdc v2 timing register expansion video: da8xx-fb: fixing timing off by one errors video: da8xx-fb fixing incorrect porch mappings video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource fbmem: move EXPORT_SYMBOL annotation next to symbol declarations drivers: video: fbcmap: remove the redundency and incorrect checkings video: mxsfb: simplify use of devm_ioremap_resource Release efifb's colormap in efifb_destroy() at91/avr32/atmel_lcdfb: prepare clk before calling enable video: exynos: Ensure definitions match prototypes OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file OMAPDSS: HDMI: Fix possible NULL reference video: da8xx-fb: adding am33xx as dependency video: da8xx-fb: let compiler decide what to inline video: da8xx-fb: make clock naming consistent video: da8xx-fb: set upstream clock rate (if reqd) video: da8xx-fb: reorganize panel detection video: da8xx-fb: ensure non-null cfg in pdata video: da8xx-fb: use devres ...
2013-09-05tuntap: orphan frags before trying to set tx timestampJason Wang1-3/+5
sock_tx_timestamp() will clear all zerocopy flags of skb which may lead the frags never to be orphaned. This will break guest to guest traffic when zerocopy is enabled. Fix this by orphaning the frags before trying to set tx time stamp. The issue were introduced by commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping). Cc: Richard Cochran <richardcochran@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05tuntap: purge socket error queue on detachJason Wang1-3/+9
Commit eda297729171fe16bf34fe5b0419dfb69060f623 (tun: Support software transmit time stamping) will queue skbs into error queue when tx stamping is enabled. But it forgets to purge the error queue during detach. This patch fixes this. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05qlcnic: use standard NAPI weightsMichal Schmidt2-19/+12
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. qlcnic requests the weight as large as 256 for some of its rings, and smaller values for other rings. For instance in qlcnic_82xx_napi_add() I think the intention was to give the tx+rx ring a bigger weight than to rx-only rings, but it's actually doing the opposite. So I'm assuming the weights do not really matter much. Just use the standard NAPI weights for all rings. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ipv6:introduce function to find route for redirectDuan Jiong6-11/+81
RFC 4861 says that the IP source address of the Redirect is the same as the current first-hop router for the specified ICMP Destination Address, so the gateway should be taken into consideration when we find the route for redirect. There was once a check in commit a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over all possible rules on receipt of redirect.") and the check went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()"). The bug is only "exploitable" on layer-2 because the source address of the redirect is checked to be a valid link-local address but it makes spoofing a lot easier in the same L2 domain nonetheless. Thanks very much for Hannes's help. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bnx2x: VF RSS support - VF sideAriel Elior6-60/+145
In this patch capabilities are added to the Vf driver to request multiple queues over the VF PF channel, and the logic for requesting rss configuration for said queues. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilong Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bnx2x: VF RSS support - PF sideAriel Elior10-144/+513
This patch adds support for Receive Side Scaling for queues of Virtual Functions on the PF side. This includes support for the requests for multiple queues from VF drivers, configuration of the HW for multiple queues per VF, and support for rss configuration of said queues. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05vxlan: Notify drivers for listening UDP port changesJoseph Gasparakis3-1/+87
This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and ndo_del_rx_vxlan_port(). Drivers can get notifications through the above functions about changes of the UDP listening port of VXLAN. Also, when physical ports come up, now they can call vxlan_get_rx_port() in order to obtain the port number(s) of the existing VXLAN interface in case they already up before them. This information about the listening UDP port would be used for VXLAN related offloads. A big thank you to John Fastabend (john.r.fastabend@intel.com) for his input and his suggestions on this patch set. CC: John Fastabend <john.r.fastabend@intel.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge tag 'fbdev-3.12-omap-legacy-removal' of ↵Linus Torvalds53-8870/+973
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP specific fbdev changes from Tomi Valkeinen: "I've got this pull request separate from the main fbdev pull request, as this contains a bunch of OMAP board file changes and thus could possibly be rejected in case of bad conflicts. The removal of the old display drivers depend on the board file changes, so Tony Lindgren suggested taking them together via fbdev tree. These are in linux-next, and also Tony didn't see any conflicts with any of the branches he had, so they should go in clean. - Change the OMAP board files to use the new OMAP display drivers - Remove all the old drivers, and the related auxiliary code" * tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: rename omap_dss_device's 'device' field to 'dst' OMAPDSS: rename omap_dss_device's 'output' to 'src' OMAPDSS: DSS: remove legacy dss bus support OMAPDSS: RFBI: remove code related to old panel model OMAPDSS: VENC: remove code related to old panel model OMAPDSS: SDI: remove code related to old panel model OMAPDSS: DSI: remove code related to old panel model OMAPDSS: HDMI: remove code related to old panel model OMAPDSS: DPI: remove code related to old panel model OMAPDSS: remove all old panel drivers OMAPDSS: DPI: change regulator handling OMAPDSS: SDI: change regulator handling OMAPDSS: fix DPI and SDI device ids OMAPDSS: remove omap_dss_device->channel field OMAPDSS: RFBI: Mark RFBI as broken ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig ARM: OMAP: AM3517EVM: use new display drivers ARM: OMAP: Zoom: use new display drivers ARM: OMAP: Pandora: use new display drivers ARM: OMAP: OMAP3EVM: use new display drivers ...
2013-09-05net: usbnet: update addr_assign_type if appropriateBjørn Mork1-0/+4
This module generates a common default address on init, using eth_random_addr. Set addr_assign_type to let userspace know the address is random unless it was overridden by the minidriver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'enic'David S. Miller5-19/+54
Govindarajulu Varadarajan says: ==================== The following patch adds multi tx support for enic. Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: update enic maintainers and drivergovindarajulu.v2-2/+3
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Exposing symbols for Cisco's low latency drivergovindarajulu.v2-0/+11
This patch exposes symbols for usnic low latency driver that can be used to register and unregister vNics as well to traverse the resources on vNics. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Try DMA 64 first, then failover to DMAgovindarajulu.v1-4/+4
In servers with more than 1.1 TB of RAM, the existing 40/32 bit DMA could cause failure as the DMA-able address could go outside the range addressable using 40/32 bits. The following patch first tried 64 bit DMA if possible, failover to 32 bit. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: record q_number and rss_hash for skbgovindarajulu.v1-0/+11
The following patch sets the skb->rxhash and skb->q_number. This is used by RPS and RFS. Kernel can make use of hw provided hash instead of calculating the hash. Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Add multi tx support for enicgovindarajulu.v2-13/+25
The following patch adds multi tx support for enic. Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge tag 'rdma-for-linus' of ↵Linus Torvalds53-1557/+4643
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull main batch of InfiniBand/RDMA changes from Roland Dreier: - Large ocrdma HW driver update: add "fast register" work requests, fixes, cleanups - Add receive flow steering support for raw QPs - Fix IPoIB neighbour race that leads to crash - iSER updates including support for using "fast register" memory registration - IPv6 support for iWARP - XRC transport fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (54 commits) RDMA/ocrdma: Fix compiler warning about int/pointer size mismatch IB/iser: Fix redundant pointer check in dealloc flow IB/iser: Fix possible memory leak in iser_create_frwr_pool() IB/qib: Move COUNTER_MASK definition within qib_mad.h header guards RDMA/ocrdma: Fix passing wrong opcode to modify_srq RDMA/ocrdma: Fill PVID in UMC case RDMA/ocrdma: Add ABI versioning support RDMA/ocrdma: Consider multiple SGES in case of DPP RDMA/ocrdma: Fix for displaying proper link speed RDMA/ocrdma: Increase STAG array size RDMA/ocrdma: Dont use PD 0 for userpace CQ DB RDMA/ocrdma: FRMA code cleanup RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24 RDMA/ocrdma: Fix to work with even a single MSI-X vector RDMA/ocrdma: Remove the MTU check based on Ethernet MTU RDMA/ocrdma: Add support for fast register work requests (FRWR) RDMA/ocrdma: Create IRD queue fix IB/core: Better checking of userspace values for receive flow steering IB/mlx4: Add receive flow steering support IB/core: Export ib_create/destroy_flow through uverbs ...
2013-09-05bridge: apply multicast snooping to IPv6 link-local, tooLinus Lüssing3-14/+6
The multicast snooping code should have matured enough to be safely applicable to IPv6 link-local multicast addresses (excluding the link-local all nodes address, ff02::1), too. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bridge: prevent flooding IPv6 packets that do not have a listenerLinus Lüssing1-2/+8
Currently if there is no listener for a certain group then IPv6 packets for that group are flooded on all ports, even though there might be no host and router interested in it on a port. With this commit they are only forwarded to ports with a multicast router. Just like commit bd4265fe36 ("bridge: Only flood unregistered groups to routers") did for IPv4, let's do the same for IPv6 with the same reasoning. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'i2c/for-next' of ↵Linus Torvalds72-610/+1060
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - OF and ACPI helpers are now included in the core, and not in external files anymore. This removes dependency problems for modules and is cleaner, in general. - mv64xxx-driver gains fifo usage to support mv78230 - imx-driver overhaul to support VF610 - various cleanups, most notably related to devm_* and CONFIG_PM usage - driver bugfixes and smaller feature additions" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: rcar: add rcar-H2 support i2c: sirf: retry 3 times as sometimes we get random noack and timeout i2c: sirf: support reverse direction of address i2c: sirf: fix the typo for setting bitrate to less than 100k i2c: sirf: we need to wait I2C_RESET status in resume i2c: sirf: reset i2c controller early after we get a noack i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI i2c: designware: make HCNT/LCNT values configurable i2c: mpc: cleanup clock API use i2c: pnx: fix error return code in i2c_pnx_probe() i2c: ismt: add error return code in probe() i2c: mv64xxx: fix typo in binding documentation i2c: imx: use exact SoC revision to document binding i2c: move ACPI helpers into the core i2c: move OF helpers into the core i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889) i2c: mv64xxx: Add I2C Transaction Generator support i2c: powermac: fix return path on error Documentation: i2c: Fix example in instantiating-devices i2c: tiny-usb: do not use stack as URB transfer_buffer ...