summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-19Merge branch 'clk-k3-tisci' into clk-nextStephen Boyd4-1/+12
- TI SCI clks on K3 SoCs * clk-k3-tisci: clk: keystone: add missing MODULE_LICENSE clk: keystone: Enable TISCI clocks if K3_ARCH
2018-10-19Merge branches 'clk-mvebu-periph-pm', 'clk-meson', 'clk-allwinner', ↵Stephen Boyd24-761/+926
'clk-mvebu-dup' and 'clk-davinci' into clk-next - S2RAM support for Marvell mvebu periph clks * clk-mvebu-periph-pm: clk: mvebu: armada-37xx-periph: add suspend/resume support clk: mvebu: armada-37xx-periph: save the IP base address in the driver data * clk-meson: clk: meson: meson8b: use the regmap in the internal reset controller clk: meson: meson8b: register the clock controller early clk: meson-axg: pcie: drop the mpll3 clock parent clk: meson: axg: round audio system master clocks down clk: meson: clk-pll: drop hard-coded rates from pll tables clk: meson: clk-pll: remove od parameters clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary clk: meson: clk-pll: add enable bit * clk-allwinner: dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro clk: sunxi-ng: a64: Add max. rate constraint to video PLLs clk: sunxi-ng: a64: Add minimal rate for video PLLs clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs clk: sunxi-ng: nkmp: Add constraint for maximum rate clk: sunxi-ng: r40: Add max. rate constraint to video PLLs clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video clk: sunxi-ng: Add maximum rate constraint to NM PLLs clk: sunxi-ng: h6: fix PWM gate/reset offset clk: sunxi-ng: h6: fix bus clocks' divider position * clk-mvebu-dup: clk: mvebu: ap806: Remove superfluous of_clk_add_provider * clk-davinci: clk: davinci: kill davinci_clk_reset_assert/deassert()
2018-10-19Merge branches 'clk-qcom-sdm845-camcc' and 'clk-mtk-unused' into clk-nextStephen Boyd6-5/+1888
- Qualcomm SDM845 camera clock controller * clk-qcom-sdm845-camcc: clk: qcom: Add camera clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Camera clock bindings * clk-mtk-unused: clk: mediatek: remove unused array audio_parents
2018-10-19Merge branch 'clk-renesas' into clk-nextStephen Boyd38-267/+1551
* clk-renesas: (36 commits) clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks clk: renesas: r8a77990: Add missing I2C7 clock ...
2018-10-19Merge branches 'clk-dt-name', 'clk-ti-of-node' and 'clk-sa' into clk-nextStephen Boyd50-162/+166
- Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds * clk-dt-name: clk: Convert to using %pOFn instead of device_node.name * clk-ti-of-node: clk: ti: fix OF child-node lookup * clk-sa: clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe reset: hisilicon: fix potential NULL pointer dereference clk: cdce925: release child device nodes clk: qcom: clk-branch: Use true and false for boolean values
2018-10-19Merge branches 'clk-spdx', 'clk-qcom-dfs', 'clk-smp2s11-include', ↵Stephen Boyd7-102/+580
'clk-qcom-8996-missing' and 'clk-qcom-qspi' into clk-next - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 * clk-spdx: clk: mvebu: use SPDX-License-Identifier clk: renesas: Convert to SPDX identifiers clk: renesas: use SPDX identifier for Renesas drivers clk: s2mps11,s3c64xx: Add SPDX license identifiers clk: max77686: Add SPDX license identifiers * clk-qcom-dfs: clk: qcom: Allocate space for NULL terimation in DFS table clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845 clk: qcom: Add support for RCG to register for DFS * clk-smp2s11-include: clk: s2mps11: Use existing defines from bindings for clock IDs * clk-qcom-8996-missing: clk: qcom: Add some missing gcc clks for msm8996 * clk-qcom-qspi: clk: qcom: Add qspi (Quad SPI) clocks for sdm845 clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
2018-10-17clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probeGregory CLEMENT1-1/+2
The parent clock is get only to have its name, and then the clock is no more used, so we can safely free it using clk_put. Furthermore as between the successful devm_clk_get() and the devm_clk_put() call we don't exit the probe function in error so I can use non managed version of clk_get() and clk_put(). Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-08clk: keystone: add missing MODULE_LICENSEArnd Bergmann2-0/+10
A randconfig build showed that two clk modules have no license tag: WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/gate.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/clk/keystone/pll.o see include/linux/module.h for more information Add the appropriate information from the comment at the start of the two files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <ssantosh@krenel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02clk: keystone: Enable TISCI clocks if K3_ARCHNishanth Menon2-1/+2
K3_ARCH uses TISCI for clocks as well. Enable the same for the driver support. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02clk: davinci: kill davinci_clk_reset_assert/deassert()Bartosz Golaszewski2-39/+0
This code is no longer used. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02clk: mvebu: ap806: Remove superfluous of_clk_add_providerGregory CLEMENT1-1/+0
While applying the commit a8309cedcdce ("clk: apn806: Add eMMC clock to system controller driver"), of_clk_add_provider was added wheres it was already present in the probe function. This extraneous call is harmless but not useful so remove it. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02clk: mvebu: use SPDX-License-IdentifierGregory CLEMENT17-52/+17
Convert the remaining files to SPDX license description. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02Merge tag 'sunxi-clk-for-4.20' of ↵Stephen Boyd11-86/+144
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull allwinner clock changes from Maxime Ripard: Our usual set of changes for the Allwinner SoCs clock support. The most notable changes are: - A bunch of changes and fixes to support the A64 display engine - Some fixes to support the A83t display engine * tag 'sunxi-clk-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro clk: sunxi-ng: a64: Add max. rate constraint to video PLLs clk: sunxi-ng: a64: Add minimal rate for video PLLs clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs clk: sunxi-ng: nkmp: Add constraint for maximum rate clk: sunxi-ng: r40: Add max. rate constraint to video PLLs clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video clk: sunxi-ng: Add maximum rate constraint to NM PLLs clk: sunxi-ng: h6: fix PWM gate/reset offset clk: sunxi-ng: h6: fix bus clocks' divider position
2018-10-01Merge tag 'clk-renesas-for-v4.20-tag2' of ↵Stephen Boyd31-138/+954
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Add support for the new RZ/A2 (R7S9210) SoC, including early clock support for the Renesas CPG/MSSR driver - Add support for the new RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Convert DT binding includes to SPDX license identifiers * tag 'clk-renesas-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks
2018-10-01Merge tag 'meson-clk-4.20-1' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd9-627/+732
clk-meson Pull meson clk driver updates from Jerome Brunet: - clk-pll driver improvements and updates - add axg audio controller system clocks - drop mpll3 from the possible pcie clock parent of the axg - register meson8b clock controller early * tag 'meson-clk-4.20-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: use the regmap in the internal reset controller clk: meson: meson8b: register the clock controller early clk: meson-axg: pcie: drop the mpll3 clock parent clk: meson: axg: round audio system master clocks down clk: meson: clk-pll: drop hard-coded rates from pll tables clk: meson: clk-pll: remove od parameters clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary clk: meson: clk-pll: add enable bit
2018-09-29clk: renesas: Convert to SPDX identifiersKuninori Morimoto22-95/+27
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [rebased against clk-spdx] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-09-28clk: renesas: r7s9210: Add SPI clocksChris Brandt1-0/+3
Add RSPI clocks for RZ/A2. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-26clk: renesas: r7s9210: Move table update to separate functionChris Brandt1-45/+50
Same functionality, just easier to read. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-26clk: renesas: r7s9210: Convert some clocks to earlyChris Brandt1-6/+26
The OSTM timer driver for RZ/A2 uses TIMER_OF_DECLARE which requires the ostm module clocks to be registers early in boot. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-26clk: renesas: cpg-mssr: Add early clock supportChris Brandt2-21/+89
Add support for SoCs that need to register core and module clocks early in order to use OF drivers that exclusively use macros such as TIMER_OF_DECLARE. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-26clk: meson: meson8b: use the regmap in the internal reset controllerMartin Blumenstingl1-7/+6
For now the reset controller was using raw register access because the early init did not initialize the regmap. However, now that clocks are initialized early we can simply use the regmap also for the reset controller. No functional changes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: meson8b: register the clock controller earlyMartin Blumenstingl1-60/+34
Until now only the reset controller (part of the clock controller register space) was registered early in the boot process, while the clock controller itself was registered later on. However, some parts of the SoC are initialized early in the boot process, such as the SRAM and the TWD timer. The bootloader already enables these clocks so we didn't see any issues so far. Register the clock controller early so other drivers (such as the SRAM and TWD timer) can use the clocks early in the boot process. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson-axg: pcie: drop the mpll3 clock parentYixun Lan1-2/+4
We found the PCIe driver doesn't really work with the mpll3 clock which is actually reserved for debug, So drop it from the mux list. Fixes: 33b89db68236 ("clk: meson-axg: add clocks required by pcie driver") Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: axg: round audio system master clocks downJerome Brunet1-11/+23
Some of the master clocks provided by the axg audio clock controller are system clock (spdifin and pdm sysclk). They are used to clock an internal DSP of the related devices. Having them constantly rounded down instead of closest is preferable. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: clk-pll: drop hard-coded rates from pll tablesJerome Brunet5-142/+162
Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: clk-pll: remove od parametersJerome Brunet8-498/+493
Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessaryJerome Brunet3-8/+8
CLK_GET_RATE_NOCACHE should only be necessary when the registers controlling the rate of clock may change outside of CCF. On Amlogic, it should only be the case for the hdmi pll which is directly controlled by the display driver (WIP to fix this). The other plls should not require this flag. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-26clk: meson: clk-pll: add enable bitJerome Brunet5-10/+113
Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-09-25clk: renesas: r8a77970: Add TPU clockSergei Shtylyov1-0/+1
The TPU0 clock wasn't present in the original R8A77970 patch by Daisuke Matsushita, it was added in a later BSP version... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-25clk: renesas: r8a77990: Fix incorrect PLL0 divider in commentGeert Uytterhoeven1-2/+2
PLL0 runs at 4.8 GHz, i.e. EXTAL x 100. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-19dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0Fabrizio Castro1-2/+4
This patch documents RZ/G2E (a.k.a. R8A774C0) bindings for the Clock Pulse Generator driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: cpg-mssr: Add r8a774c0 supportFabrizio Castro5-0/+299
Add RZ/G2E (R8A774C0) Clock Pulse Generator / Module Standby and Software Reset support. Based on Table 8.2g of "RZ/G Series, 2nd Generation User's Manual: Hardware (Rev. 0.61, June 12, 2018)". Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: Add r8a774c0 CPG Core Clock DefinitionsFabrizio Castro1-0/+60
Add all RZ/G2E (a.k.a. R8A774C0) Clock Pulse Generator Core Clock Outputs, as listed in Table 8.2g ("List of Clocks [RZ/G2E]") of the RZ/G2 Hardware User's Manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: r8a7743: Add r8a7744 supportBiju Das3-2/+18
Add RZ/G1N (R8A7744) Clock Pulse Generator / Module Standby and Software Reset support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: Add r8a7744 CPG Core Clock DefinitionsBiju Das1-0/+39
Add all RZ/G1N Clock Pulse Generator Core Clock Outputs, as listed in Table 7.2b ("List of Clocks [RZ/G1M/N]") of the RZ/G1 Hardware User's Manual. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 bindingBiju Das1-5/+6
Add binding documentation for the RZ/G1N (R8A7744) Clock Pulse Generator driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19dt-bindings: clock: renesas: Convert to SPDX identifiersKuninori Morimoto15-93/+30
This patch updates license to use SPDX-License-Identifier instead of verbose license text on Renesas related headers. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-11clk: renesas: cpg-mssr: Add R7S9210 supportChris Brandt7-14/+300
Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module Standby. The Module Standby HW in the RZ/A series is very close to R-Car HW, except for how the registers are laid out. The MSTP registers are only 8-bits wide, there are no status registers (MSTPSR), and the register offsets are a little different. Since the RZ/A hardware manuals refer to these registers as the Standby Control Registers, we'll use that name to distinguish the RZ/A type from the R-Car type. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Rob Herring <robh@kernel.org> # DT bits Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-11clk: renesas: r8a77970: Add TMU clocksSergei Shtylyov1-0/+5
The TMU clocks weren't present in the original R8A77970 patch by Daisuke Matsushita, they were added in a later BSP version... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-11clk: renesas: r8a77970: Add CMT clocksSergei Shtylyov1-0/+4
Add the R8A77970 CMT module clocks. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-11clk: renesas: r9a06g032: Fix UART34567 clock ratePhil Edworthy1-1/+2
The clock for UARTs 0 through 2 is UART012, the clock for UARTs 3 through 7 is UART34567. For UART012, we stop the clock driver from changing the clock rate. This is because the Synopsys UART driver simply sets the reference clock to 16x the baud rate, but doesn't check if the actual rate is within the required tolerance. The RZ/N1 clock divider can't provide this (we have to rely on the UART's internal divider to set the correct clock rate), so you end up with a clock rate that is way off what you wanted. In addition, since the clock is shared between multiple UARTs, you don't want the driver trying to change the clock rate as it may affect the other UARTs (which may not have been configured yet, so you don't know what baud rate they will use). Normally, the clock rate is set early on before Linux to some very high rate that supports all of the clock rates you want. This change stops the UART34567 clock rate from changing for the same reasons. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-05dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macroJagan Teki2-1/+4
Allwinner A64 HDMI PHY clock has PLL_VIDEO0 as a parent. Include the macro on dt-bindings so-that the same can be used while defining CCU clock phandles. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-05clk: sunxi-ng: a64: Add max. rate constraint to video PLLsIcenowy Zheng1-24/+26
Video PLLs on A64 can be set to higher rate that it is actually supported by HW. Limit maximum rate to 1008 MHz. This is the maximum allowed rate by BSP clock driver. Interestengly, user manual specifies maximum frequency to be 600 MHz. Historically, this data was wrong in some user manuals for other SoCs, so more faith is put in BSP clock driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-05clk: sunxi-ng: a64: Add minimal rate for video PLLsJagan Teki1-22/+24
According to documentation and experience with other similar SoCs, video PLLs don't work stable if their output frequency is set below 192 MHz. Because of that, set minimal rate to both A64 video PLLs to 192 MHz. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-05clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocksIcenowy Zheng1-20/+23
On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-03clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHISergei Shtylyov2-2/+67
On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on the other R-Car gen3 SoCs. In fact, the layout is the same as on R-Car gen2 SoCs, so we'll need to copy the divisor tables from the R-Car gen2 driver. We'll also need to support the SoC specific clock types, thus we're adding CLK_TYPE_GEN3_SOC_BASE at the end of 'enum rcar_gen3_clk_types', declare SD0H/SDH clocks in 'enum r8a77970_clk_types', and handle those clocks in the overridden cpg_clk_register() method; then, finally, add the SD-IF module clock (derived from the SD0 clock). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-03clk: renesas: r8a77980: Add CMT clocksSergei Shtylyov1-0/+4
Now that RCLK has been added by Geert, we can add the CMT module clocks. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-31clk: mvebu: armada-37xx-periph: add suspend/resume supportMiquel Raynal1-0/+43
Add suspend/resume hooks in Armada 37xx peripheral clocks driver to handle S2RAM operations. One can think that these hooks are useless by comparing the register values before and after a suspend/resume cycle: they will look the same anyway. This is because of some scripts executed by the Cortex-M3 core during ATF operations to init both the clocks and the DDR. These values could be modified by the BL33 stage or by Linux itself and should be preserved. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-31clk: mvebu: armada-37xx-periph: save the IP base address in the driver dataMiquel Raynal1-8/+7
Prepare the introduction of suspend/resume hooks by having an easy way to access all the registers in one go just from a device: add the IP base address in the driver data. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-31reset: hisilicon: fix potential NULL pointer dereferenceGustavo A. R. Silva1-3/+2
There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: 97b7129cd2af ("reset: hisilicon: change the definition of hisi_reset_init") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 01:49:08 +0300