Age | Commit message (Collapse) | Author | Files | Lines |
|
Link: https://lore.kernel.org/r/20241014141217.941104064@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241015112501.498328041@linuxfoundation.org
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 586e19c88a0cb58b6ff45ae085b3dd200d862153 which is
commit a6a5006dad572a53b5df3f47e1471d207ae9ba49 upstream.
This commit is pulled in due to dependency for:
8c91a4bfc7f8 ("iommu: Fix compilation without CONFIG_IOMMU_INTEL")
But the patch itself is part of a patchset, should not only include one,
and it lead to boot hang on on Kernel 6.1.83+ with Dell PowerEdge R770
and Intel Xeon 6710E, so revert it for stable 6.1.112
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ba0403ac6447f2d63914fb760c44a3b19c44eaf upstream.
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Fixes: 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abaf1e0355abb050f9c11d2d13a513caec80f7ad upstream.
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
Fixes: eef4fee5e52071d5 ("perf lock: Dynamically allocate lockhash_table")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/lkml/ZN4R1AYfsD2J8lRs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2942dfab630444d46aaa37fb7d629b620abbf6ba upstream.
An earlier commit deleted the TSO support in the Cortina Gemini
driver because the driver was confusing gso_size and MTU,
probably because what the Linux kernel calls "gso_size" was
called "MTU" in the datasheet.
Restore the functionality properly reading the gso_size from
the skbuff.
Tested with iperf3, running a server on a different machine
and client on the device with the cortina gemini ethernet:
Connecting to host 192.168.1.2, port 5201
60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
60008000.ethernet-port eth0: segment offloading mss = 05ea len=27da
60008000.ethernet-port eth0: segment offloading mss = 05ea len=0b92
60008000.ethernet-port eth0: segment offloading mss = 05ea len=2bda
(...)
(The hardware MSS 0x05ea here includes the ethernet headers.)
If I disable all segment offloading on the receiving host and
dump packets using tcpdump -xx like this:
ethtool -K enp2s0 gro off gso off tso off
tcpdump -xx -i enp2s0 host 192.168.1.136
I get segmented packages such as this when running iperf3:
23:16:54.024139 IP OpenWrt.lan.59168 > Fecusia.targus-getdata1:
Flags [.], seq 1486:2934, ack 1, win 4198,
options [nop,nop,TS val 3886192908 ecr 3601341877], length 1448
0x0000: fc34 9701 a0c6 14d6 4da8 3c4f 0800 4500
0x0010: 05dc 16a0 4000 4006 9aa1 c0a8 0188 c0a8
0x0020: 0102 e720 1451 ff25 9822 4c52 29cf 8010
0x0030: 1066 ac8c 0000 0101 080a e7a2 990c d6a8
(...)
0x05c0: 5e49 e109 fe8c 4617 5e18 7a82 7eae d647
0x05d0: e8ee ae64 dc88 c897 3f8a 07a4 3a33 6b1b
0x05e0: 3501 a30f 2758 cc44 4b4a
Several such packets often follow after each other verifying
the segmentation into 0x05a8 (1448) byte packages also on the
reveiving end. As can be seen, the ethernet frames are
0x05ea (1514) in size.
Performance with iperf3 before this patch: ~15.5 Mbit/s
Performance with iperf3 after this patch: ~175 Mbit/s
This was running a 60 second test (twice) the best measurement
was 179 Mbit/s.
For comparison if I run iperf3 with UDP I get around 1.05 Mbit/s
both before and after this patch.
While this is a gigabit ethernet interface, the CPU is a cheap
D-Link DIR-685 router (based on the ARMv5 Faraday FA526 at
~50 MHz), and the software is not supposed to drive traffic,
as the device has a DSA chip, so this kind of numbers can be
expected.
Fixes: ac631873c9e7 ("net: ethernet: cortina: Drop TSO support")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 532b53cebe58f34ce1c0f34d866f5c0e335c53c6 upstream.
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk
Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 214e01ad4ed7158cab66498810094fac5d09b218 upstream.
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes: 5c25b5ff89f0 ("workqueue: Tag bound workers with KTHREAD_IS_PER_CPU")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Tested-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 835745a377a4519decd1a36d6b926e369b3033e2 upstream.
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-3-ymaman@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fcbd9785d4c17ea533c42f20a9083a83f301fa6 upstream.
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Link: https://lkml.kernel.org/r/23c02a03e8d666fef11bbe13e85c69c8b4ca0624.1727421694.git.llfl@linux.alibaba.com
Fixes: b9b5777f09be ("device-dax: use ALIGN() for determining pgoff")
Signed-off-by: Kun(llfl) <llfl@linux.alibaba.com>
Tested-by: JianXiong Zhao <zhaojianxiong.zjx@alibaba-inc.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db0a37b7ac27d8ca27d3dc676a16d081c16ec7b9 upstream.
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e4b ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e32d262c89e2b22cb0640223f953b548617ed8a6 upstream.
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c14e51d2d7df49fe0d4e64a12c58d2542f452ff upstream.
Accessing device registers seems to be not reliable, the chip
revision is sometimes detected wrongly (0 instead of expected 1).
Ensure that the chip reset is performed via reset GPIO and then
wait for 'Device Ready' status in HW_CFG register before doing
any register initializations.
Cc: stable@vger.kernel.org
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
[alex: reworked using read_poll_timeout()]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20241004113655.3436296-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f802 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 631083143315d1b192bd7d915b967b37819e88ea upstream.
We have recently noticed the exact same KASAN splat as in commit
6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket
creation fails"). The problem is that commit did not fully address the
problem, as some pf->create implementations do not use sk_common_release
in their error paths.
For example, we can use the same reproducer as in the above commit, but
changing ping to arping. arping uses AF_PACKET socket and if packet_create
fails, it will just sk_free the allocated sk object.
While we could chase all the pf->create implementations and make sure they
NULL the freed sk object on error from the socket, we can't guarantee
future protocols will not make the same mistake.
So it is easier to just explicitly NULL the sk pointer upon return from
pf->create in __sock_create. We do know that pf->create always releases the
allocated sk object on error, so if the pointer is not NULL, it is
definitely dangling.
Fixes: 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241003170151.69445-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a38719e3157118428e34fbd45b0d0707a5877784 upstream.
A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.
Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.
Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)
This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.
This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.
Cc: stable@vger.kernel.org # v6.6+
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 119d51e225febc8152476340a880f5415a01e99e upstream.
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes: dea2b1ea9c70 ("mptcp: do not reset MP_CAPABLE subflow on mapping errors")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2]
Link: https://github.com/multipath-tcp/packetdrill [3]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4]
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-3-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9023ed8d91eb1fcc93e64dc4962f7412b1c4cbec upstream.
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.
Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@kernel.org
Fixes: dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/09e11a0a54e6aa2a88bd214526d305aaf018f523.1727926187.git.fthain@linux-m68k.org
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b2ad4f6f2bec74a5287d96cb2325a5e11706f22 upstream.
Upon closing the file descriptor, the active performance monitor is not
stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`,
the active performance monitor's pointer (`vc4->active_perfmon`) is still
retained.
If we open a new file descriptor and submit a few jobs with performance
monitors, the driver will attempt to stop the active performance monitor
using the stale pointer in `vc4->active_perfmon`. However, this pointer
is no longer valid because the previous process has already terminated,
and all performance monitors associated with it have been destroyed and
freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it.
Cc: stable@vger.kernel.org # v4.17+
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Fixes: 65101d8c9108 ("drm/vc4: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004123817.890016-2-mcanal@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d1fd3638ee3a9f9bca4785fffb638ca19120718 upstream.
When running `kmscube` with one or more performance monitors enabled
via `GALLIUM_HUD`, the following kernel panic can occur:
[ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4
[ 55.008368] Mem abort info:
[ 55.008377] ESR = 0x0000000096000005
[ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits
[ 55.008402] SET = 0, FnV = 0
[ 55.008412] EA = 0, S1PTW = 0
[ 55.008421] FSC = 0x05: level 1 translation fault
[ 55.008434] Data abort info:
[ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000
[ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper
gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb
drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1
[ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608
[ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608
[ 55.008895] sp : ffffffc080673cf0
[ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28
[ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148
[ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38
[ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000
[ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90
[ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0
[ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04
[ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857
[ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470
[ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470
[ 55.013292] Call trace:
[ 55.013959] __mutex_lock.constprop.0+0x90/0x608
[ 55.014646] __mutex_lock_slowpath+0x1c/0x30
[ 55.015317] mutex_lock+0x50/0x68
[ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d]
[ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d]
[ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched]
[ 55.017921] kthread+0x11c/0x128
[ 55.018554] ret_from_fork+0x10/0x20
[ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401)
[ 55.019776] ---[ end trace 0000000000000000 ]---
[ 55.020411] note: v3d_bin[166] exited with preempt_count 1
This issue arises because, upon closing the file descriptor (which happens
when we interrupt `kmscube`), the active performance monitor is not
stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`,
the active performance monitor's pointer (`v3d->active_perfmon`) is still
retained.
If `kmscube` is run again, the driver will attempt to stop the active
performance monitor using the stale pointer in `v3d->active_perfmon`.
However, this pointer is no longer valid because the previous process has
already terminated, and all performance monitors associated with it have
been destroyed and freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it.
Cc: stable@vger.kernel.org # v5.15+
Closes: https://github.com/raspberrypi/linux/issues/6389
Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004130625.918580-2-mcanal@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d41bff05a61fb539f21e9bf0d39fac77f457434e upstream.
Fix the uninitialized symbol 'rv' in the function ish_fw_xfer_direct_dma
to resolve the following warning from the smatch tool:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:714 ish_fw_xfer_direct_dma()
error: uninitialized symbol 'rv'.
Initialize 'rv' to 0 to prevent undefined behavior from uninitialized
access.
Cc: stable@vger.kernel.org
Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241004075944.44932-1-surajsonawane0215@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df9158826b00e53f42c67d62c887a84490d80a0a upstream.
Registering a gadget driver is expected to complete synchronously and
immediately after calling driver_register() this function checks that
the driver has bound so as to return an error.
Set PROBE_FORCE_SYNCHRONOUS to ensure this is the case even when
asynchronous probing is set as the default.
Fixes: fc274c1e99731 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240913102325.2826261-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6555cb1cb69db479d0760e392c175ba32426842 upstream.
JieLi tends to use SCSI via USB Mass Storage to implement their own
proprietary commands instead of implementing another USB interface.
Enumerating it as a generic mass storage device will lead to a Hardware
Error sense key get reported.
Ignore this bogus device to prevent appearing a unusable sdX device
file.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241001083407.8336-1-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d44238d8254a36249d576c96473269dbe500f5e4 upstream.
I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD,
and other from ASMEDIA. The one from ASMEDIA have problems when resume
from suspend, and keep broken until unplug the power cord. I use this
kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a
path to reset only the ASMEDIA xhci.
Signed-off-by: Jose Alberto Reguero <jose.alberto.reguero@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240919184202.22249-1-jose.alberto.reguero@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d410e8913f5cffebcca79ffdd596009d4a13a28 upstream.
This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.
Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71c717cd8a2e180126932cc6851ff21c1d04d69a upstream.
This reverts commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035.
This patch leads to passing 0 to simple_read_from_buffer()
as a fifth argument, turning the read method into a nop.
The change is fundamentally flawed, as it breaks the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241007094004.242122-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87b696209007b7c4ef7bdfe39ea0253404a43770 upstream.
Some Plantronics headset as the below send an unexcept opposite
volume key's HID report for each volume key press after 200ms, like
unecepted Volume Up Key following Volume Down key pressed by user.
This patch adds a quirk to hid-plantronics for these devices, which
will ignore the second unexcepted opposite volume key if it happens
within 220ms from the last one that was handled.
Plantronics EncorePro 500 Series (047f:431e)
Plantronics Blackwire_3325 Series (047f:430c)
The patch was tested on the mentioned model, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected per test
result.
Cc: stable@vger.kernel.org
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c56f9ecb7fb6a3a90079c19eb4c8daf3bbf514b3 upstream.
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Tested-by: Richard <hobbes1069@gmail.com>
Tested-by: Skyler <skpu@pm.me>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit b40eeedbbc0833716b5ccae64cf914f2604a3e5e, which was
upstream commit 2eb5e25d8495 ("net: ibm/emac: allocate dummy net_device
dynamically").
alloc_netdev_dummy(( does not exist in 6.1, so all this backport did was
break the build.
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b6abcc19566509ab4812bd5ae5df46515d0c1d70 ]
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-2-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14849a2ec175bb8a2280ce20efe002bb19f1e274 ]
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: df885d912f67 ("hwmon: (adm9240) Convert to regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-1-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 193bc02c664999581a1f38c152f379fce91afc0c ]
0-day reports:
drivers/hwmon/tmp513.c:162:21: error:
variable 'tmp51x_regmap_config' has initializer but incomplete type
162 | static const struct regmap_config tmp51x_regmap_config = {
| ^
struct regmap_config is only available if REGMAP is enabled.
Add the missing Kconfig dependency to fix the problem.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020246.2cTDDx0X-lkp@intel.com/
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Cc: Eric Tremblay <etremblay@distech-controls.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2663d0462eb32ae7c9b035300ab6b1523886c718 ]
req->n_channels must be set before req->channels[] can be used.
This patch fixes one of the issues encountered in [1].
[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[ 83.964264] Call Trace:
[ 83.964267] <TASK>
[ 83.964269] dump_stack_lvl+0x3f/0xc0
[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110
[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0
[ 83.964281] __ieee80211_start_scan+0x601/0x990
[ 83.964291] nl80211_trigger_scan+0x874/0x980
[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160
[ 83.964298] genl_rcv_msg+0x240/0x270
[...]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810
Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[Xiangyu: Modified to apply on 6.1.y and 6.6.y]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b75da22ed1e6171e261bc9265370162553d5393 ]
There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ on shutdown callback.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Fixes: d2aa060d40fa ("net/mlx5: Cancel health poll before sending panic teardown command")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Xiangyu: Modified to apply on 6.1.y to fix CVE-2024-43866]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 251efae73bd46b097deec4f9986d926813aed744 ]
The 2024 Lenovo Y9000P which use GT7868Q chip also needs a fixup.
The information of the chip is as follows:
I2C HID v1.00 Mouse [GXTP5100:00 27C6:01E0]
Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a5a3c952e82c1ada12bf8c55b73af26f1a454bd2 upstream.
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde73 ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e03965: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
[ Boqun: Use `UnsafeCell` since `Opaque` is not in v6.1, as suggested by
Gary Guo, `UnsafeCell` also suffices for this particular case because
`__this_module` is only used to create `THIS_MODULE`, no other Rust
code will touch it. ]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d3fce8cbe3a70a1c7c06c9b53696be5d5d8dd5c ]
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455
ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline]
ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212
ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Fixes: b5451d783ade ("slip: Move the SLIP drivers")
Reported-by: syzbot+2ada1bc857496353be5a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/670646db.050a0220.3f80e.0027.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241009091132.2136321-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40dddd4b8bd08a69471efd96107a4e1c73fabefc ]
syzbot reported an issue in ppp_async_encode() [1]
In this case, pppoe_sendmsg() is called with a zero size.
Then ppp_async_encode() is called with an empty skb.
BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline]
ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4092 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1d121645899e7692f92a@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009185802.3763282-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d51705614f668254cc5def7490df76f9680b4659 ]
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d934 ("mctp: Add device handling and netlink interface")
Fixes: 831119f88781 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583a7 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78b7b991838a4a6baeaad934addc4db2c5917eb8 ]
Since introduced, vxlan_vnifilter_init() has been ignoring the
returned value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07cc7b0b942bf55ef1a471470ecda8d2a6a6541f ]
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 78b7b991838a ("vxlan: Handle error of rtnl_register_module().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 080ddc22f3b0a58500f87e8e865aabbf96495eea ]
It's done in probe so it should be undone here.
Fixes: 1d3bb996481e ("Device tree aware EMAC driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20241008233050.9422-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2eb5e25d84956c264dc03fc45deb3701f3a0ccea ]
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 080ddc22f3b0 ("net: ibm: emac: mal: add dcr_unmap to _remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05ef7055debc804e8083737402127975e7244fc4 ]
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa87 ("netfilter: nft_fib: Fix for rpath check with VRF devices")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0bfcb7b71e735560077a42847f69597ec7dcc326 ]
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
This change passes the selftests in iptables.git.
Reported-by: syzbot+256c348558aa5cf611a9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netfilter-devel/66fec2e2.050a0220.9ec68.0047.GAE@google.com/
Fixes: 0269ea493734 ("netfilter: xtables: add cluster match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4d5c70e6155d5eae198bade4afeab3c1b15073b6 ]
If hashing fails in sctp_listen_start(), the socket remains in the
LISTENING state, even though it was not added to the hash table.
This can lead to a scenario where a socket appears to be listening
without actually being accessible.
This patch ensures that if the hashing operation fails, the sk_state
is set back to CLOSED before returning an error.
Note that there is no need to undo the autobind operation if hashing
fails, as the bind port can still be used for next listen() call on
the same socket.
Fixes: 76c6d988aeb3 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe4cd7ed128fe82ab9fe4f9fc8a73d4467699787 ]
At btrfs_load_zone_info() we have an error path that is dereferencing
the name of a device which is a RCU string but we are not holding a RCU
read lock, which is incorrect.
Fix this by using btrfs_err_in_rcu() instead of btrfs_err().
The problem is there since commit 08e11a3db098 ("btrfs: zoned: load zone's
allocation offset"), back then at btrfs_load_block_group_zone_info() but
then later on that code was factored out into the helper
btrfs_load_zone_info() by commit 09a46725cc84 ("btrfs: zoned: factor out
per-zone logic from btrfs_load_block_group_zone_info").
Fixes: 08e11a3db098 ("btrfs: zoned: load zone's allocation offset")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08c8acc9d8f3f70d62dd928571368d5018206490 ]
dcr_map is called in the previous if and therefore needs to be unmapped.
Fixes: 1ff0fcfcb1a6 ("ibm_newemac: Fix new MAL feature handling")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241007235711.5714-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3cb7cf1540ddff5473d6baeb530228d19bc97b8a ]
Most qdiscs maintain their backlog using qdisc_pkt_len(skb)
on the assumption it is invariant between the enqueue()
and dequeue() handlers.
Unfortunately syzbot can crash a host rather easily using
a TBF + SFQ combination, with an STAB on SFQ [1]
We can't support TCA_STAB on arbitrary level, this would
require to maintain per-qdisc storage.
[1]
[ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 88.798611] #PF: supervisor read access in kernel mode
[ 88.799014] #PF: error_code(0x0000) - not-present page
[ 88.799506] PGD 0 P4D 0
[ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI
[ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117
[ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00
All code
========
0: 0f b7 50 12 movzwl 0x12(%rax),%edx
4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax
b: 00
c: 48 89 d6 mov %rdx,%rsi
f: 48 29 d0 sub %rdx,%rax
12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx
19: 48 c1 e0 03 shl $0x3,%rax
1d: 48 01 c2 add %rax,%rdx
20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx)
25: 7e c0 jle 0xffffffffffffffe7
27: 48 8b 3a mov (%rdx),%rdi
2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction
2d: 4c 89 02 mov %r8,(%rdx)
30: 49 89 50 08 mov %rdx,0x8(%r8)
34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
3b: 00
3c: 48 rex.W
3d: c7 .byte 0xc7
3e: 07 (bad)
...
Code starting with the faulting instruction
===========================================
0: 4c 8b 07 mov (%rdi),%r8
3: 4c 89 02 mov %r8,(%rdx)
6: 49 89 50 08 mov %rdx,0x8(%r8)
a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
11: 00
12: 48 rex.W
13: c7 .byte 0xc7
14: 07 (bad)
...
[ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206
[ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800
[ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000
[ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f
[ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140
[ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac
[ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000
[ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0
[ 88.808165] Call Trace:
[ 88.808459] <TASK>
[ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715)
[ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539)
[ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
[ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq
[ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036)
[ 88.810950] tbf_reset (./include/linux/timekeeping.h:169 net/sched/sch_tbf.c:334) sch_tbf
[ 88.811208] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036)
[ 88.811484] netif_set_real_num_tx_queues (./include/linux/spinlock.h:396 ./include/net/sch_generic.h:768 net/core/dev.c:2958)
[ 88.811870] __tun_detach (drivers/net/tun.c:590 drivers/net/tun.c:673)
[ 88.812271] tun_chr_close (drivers/net/tun.c:702 drivers/net/tun.c:3517)
[ 88.812505] __fput (fs/file_table.c:432 (discriminator 1))
[ 88.812735] task_work_run (kernel/task_work.c:230)
[ 88.813016] do_exit (kernel/exit.c:940)
[ 88.813372] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4))
[ 88.813639] ? handle_mm_fault (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/memcontrol.h:1022 ./include/linux/memcontrol.h:1045 ./include/linux/memcontrol.h:1052 mm/memory.c:5928 mm/memory.c:6088)
[ 88.813867] do_group_exit (kernel/exit.c:1070)
[ 88.814138] __x64_sys_exit_group (kernel/exit.c:1099)
[ 88.814490] x64_sys_call (??:?)
[ 88.814791] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
[ 88.815012] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 88.815495] RIP: 0033:0x7f44560f1975
Fixes: 175f9c1bba9b ("net_sched: Add size table for qdiscs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20241007184130.3960565-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 330a699ecbfc9c26ec92c6310686da1230b4e7eb ]
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
[ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down
[ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0
[ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000
[ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000
[ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message
[ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported.
[ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message
[ T292] pcieport 0000:00:1c.5: AER: broadcast resume message
[ T292] ------------[ cut here ]------------
[ T292] kernel BUG at net/core/dev.c:6539!
[ T292] invalid opcode: 0000 [#1] PREEMPT SMP
[ T292] RIP: 0010:napi_enable+0x37/0x40
[ T292] Call Trace:
[ T292] <TASK>
[ T292] ? die+0x33/0x90
[ T292] ? do_trap+0xdc/0x110
[ T292] ? napi_enable+0x37/0x40
[ T292] ? do_error_trap+0x70/0xb0
[ T292] ? napi_enable+0x37/0x40
[ T292] ? napi_enable+0x37/0x40
[ T292] ? exc_invalid_op+0x4e/0x70
[ T292] ? napi_enable+0x37/0x40
[ T292] ? asm_exc_invalid_op+0x16/0x20
[ T292] ? napi_enable+0x37/0x40
[ T292] igb_up+0x41/0x150
[ T292] igb_io_resume+0x25/0x70
[ T292] report_resume+0x54/0x70
[ T292] ? report_frozen_detected+0x20/0x20
[ T292] pci_walk_bus+0x6c/0x90
[ T292] ? aer_print_port_info+0xa0/0xa0
[ T292] pcie_do_recovery+0x22f/0x380
[ T292] aer_process_err_devices+0x110/0x160
[ T292] aer_isr+0x1c1/0x1e0
[ T292] ? disable_irq_nosync+0x10/0x10
[ T292] irq_thread_fn+0x1a/0x60
[ T292] irq_thread+0xe3/0x1a0
[ T292] ? irq_set_affinity_notifier+0x120/0x120
[ T292] ? irq_affinity_notify+0x100/0x100
[ T292] kthread+0xe2/0x110
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork+0x2d/0x50
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork_asm+0x11/0x20
[ T292] </TASK>
To fix this issue igb_io_resume() checks if the interface is running and
the device is not down this means igb_io_error_detected() did not bring
the device down and there is no need to bring it up.
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dac6c7b3d33756d6ce09f00a96ea2ecd79fae9fb ]
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
Fixes: fed0d9f13266 ("i40e: Fix VF's MAC Address change on VM")
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|