summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-27net: lmc: remove -I. header search pathMasahiro Yamada1-1/+1
The header search path -I. in kernel Makefiles is very suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. I was able to build without this header search path. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27atheros: atl2: replace dev_kfree_skb_any() by dev_consume_skb_any()Yang Wei1-1/+1
atl2_xmit_frame() should call dev_consume_skb_any() when the transmission is successful. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 'ip_tunnel-next'David S. Miller4-112/+66
wenxu says: ==================== ip_tunnel: Refactor ip_gre collect metadata xmit to ip_md_tunnel_xmit This patchset add tunnel_dst_cache and tnl_update_pmtu feature for ip_md_tunnel_xmit also bugfix. Then Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmitwenxu1-93/+19
Refactor collect metatdata mode tunnel xmit to the generic xmit function ip_md_tunnel_xmit. It makes codes more generic and support more feture such as pmtu_update through ip_md_tunnel_xmit Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Fix route fl4 init in ip_md_tunnel_xmitwenxu1-2/+3
Init the gre_key from tuninfo->key.tun_id and init the mark from the skb->mark, set the oif to zero in the collect metadata mode. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmitwenxu3-12/+29
Add tnl_update_pmtu in ip_md_tunnel_xmit to dynamic modify the pmtu which packet send through collect_metadata mode ip tunnel Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Add ip tunnel dst_cache in ip_md_tunnel_xmitwenxu1-5/+15
Add ip tunnel dst cache in ip_md_tunnel_xmit to make more efficient for the route lookup. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26lan743x: Provide Read/Write Access to on chip OTPBryan Whitehead2-52/+182
The LAN743x includes on chip One-Time-Programmable (OTP) memory. This patch extends the ethtool EEPROM read/write interface to access OTP memory space. The currently existing interface is limited, as it does not allow OTP read, and OTP writes are restricted to offset==0, length==512, and data[0]==0xF3. This patch removes these restrictions and adds a private flag called OTP_ACCESS, which is used to switch between EEPROM, and OTP modes. The private flag OTP_ACCESS is configurable through the ethtool --set-priv-flags command. And visible through the ethtool --show-priv-flags command. By default OTP_ACCESS is false, and there for previously existing EEPROM commands will work exactly the same. However now access to OTP requires one extra step of setting OTP_ACCESS to true. This flag controls the read, write, and length reporting, functions of ethtool. EEPROM presence is not checked when setting or clearing this flag. If the EEPROM is not present, the user, as before, will need to diagnose that using existing read and write function of ethtool, while OTP_ACCESS is false. Updates for V2: Added comments as to why this patch is needed. Added comments explaining that EEPROM presence is not check when setting or clearing the OTP_ACCESS flag. Added length checking to all otp/eeprom read/write functions. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 'hns3-next'David S. Miller7-69/+138
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: don't allow vf to enable promisc modeJian Shen2-18/+21
VF can receive packets of other functions when in promisc mode. It's not safe, so don't allow VF to enable promisc mode. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: add initialization for nic stateJian Shen1-2/+4
This patch adds initialization for nic state, sets flag HNS3_NIC_STATE_DOWN when initialize, clears it before vectors and napi being enabled in the hns3_nic_net_up(), and sets it back in the error handler. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: add 8 BD limit for tx flowPeng Li1-1/+27
A single transmit packet can span up to 8 descriptors according to the HW limit. If a skb has more than 8 frags, driver uses skb_copy to get a new skb which has less frags. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: call hns3_nic_set_real_num_queue with netdev downYunsheng Lin2-12/+13
hns3_client_setup_tc in enet is for updating TC configuration to stack, and hclge_setup_tc in hclge_dcb is mainly for setting the configuration to hardware. This patch removes the hns3_nic_set_real_num_queue from hns3_setup_tc in enet, and call hclge_client_setup_tc to update TC configuration to stack with netdev down, because the netdev down operation is done in hclge_dcb now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: remove dcb_ops->map_update in hclge_dcbYunsheng Lin3-14/+6
After doing down/uninit/init/up in hclge_dcb, it is not necessary to call dcb_ops->map_update in enet, so hclge_map_update can be called directly in hclge_dcb. This is for preparing to call hns3_nic_set_real_num_queue with netdev down when user changes mqprio configuration. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: do reinitialization while mqprio configuration changedYunsheng Lin2-17/+21
When user changes the mqprio configuration, enet need to be uninited and inited besides down'ed and up'ed, because the queue num may change when the TC num changes. Also, it is more suitable to do the down/unint/init/up operation in hclge module using hclge_notify_client, because this config change may affect PF and its VF. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: After setting the loopback, add the status of getting MACliuzhongzhu1-1/+22
After setting the serdes loopback, you need to determine the status of the MAC negotiation. If a status exception is obtained after 200ms, a timeout error is returned. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: fix broadcast promisc issue for revision 0x20Jian Shen2-3/+11
For revision 0x20, vlan filter is always bypassed when enable broadcast promisc mode. In this case, broadcast packets with any vlan id can be accpeted. We should disable broadcast promisc mode until user want enable it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: fix return value handle issue for hclge_set_loopback()Jian Shen2-4/+7
In current code, it always return 0, even loopback mode setting failed. It's incorrect. This patch fixes return value handle for loopback test. Fixes: 0f29fc23b21d ("net: hns3: Fix for loopback selftest failed problem") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: add error handling in hclge_ieee_setetsYunsheng Lin1-2/+13
Currently hclge_ieee_setets returns error directly when there is error, which may cause netdev not up problem. This patch adds some error handling when setting ETS configuration fails. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: clear pci private data when unload hns3 driverJian Shen1-0/+1
When unload hns3 driver, we should clear the pci private data. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: hns3: don't update packet statistics for packets dropped by hardwareJian Shen1-3/+0
Packet statistics for netdev should not include the packets dropped by hardware. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 'r8169-add-EEE-support-for-RTL8168f'David S. Miller1-32/+48
Heiner Kallweit says: ==================== r8169: add EEE support for RTL8168f This series adds EEE support for RTL8168f. Again first patch adds the support, and second patch enables EEE per default. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26r8169: enable EEE per default on RTL8168fHeiner Kallweit1-33/+2
Enable EEE per default on RTL8168f. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26r8169: add EEE support for RTL8168fHeiner Kallweit1-0/+47
Add EEE support for RTL8168f to the recently added EEE handling framework in the driver. This patch leaves the chip defaults, means EEE typically is disabled initially and it's up to the user to enable it via ethtool. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Documentation: net: phy: switch documentation to rst formatHeiner Kallweit3-429/+448
Switch phylib documentation to rst format. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26tcp: allow zerocopy with fastopenWillem de Bruijn3-7/+6
Accept MSG_ZEROCOPY in all the TCP states that allow sendmsg. Remove the explicit check for ESTABLISHED and CLOSE_WAIT states. This requires correctly handling zerocopy state (uarg, sk_zckey) in all paths reachable from other TCP states. Such as the EPIPE case in sk_stream_wait_connect, which a sendmsg() in incorrect state will now hit. Most paths are already safe. Only extension needed is for TCP Fastopen active open. This can build an skb with data in tcp_send_syn_data. Pass the uarg along with other fastopen state, so that this skb also generates a zerocopy notification on release. Tested with active and passive tcp fastopen packetdrill scripts at https://github.com/wdebruij/packetdrill/commit/1747eef03d25a2404e8132817d0f1244fd6f129d Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ptp: fix debugfs_simple_attr.cocci warningsYueHaibing1-8/+8
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 'r8169-add-EEE-support-for-RTL8168g+'David S. Miller1-10/+206
Heiner Kallweit says: ==================== r8169: add EEE support for RTL8168g+ This series adds general EEE support to be used with ethtool. In addition it implements EEE for chip versions from RTL8168g. The first patch leaves the default chip settings and the second enables EEE per default. This allows us to revert patch 2 w/o removing EEE support completely if we should face issues with EEE on particular chip versions. Unfortunately Realtek decided not to use the standard EEE MMD registers but to use proprietary registers. Therefore we can't use phylib functions like phy_ethtool_set_eee and have to reimplement the functionality. Tested on a system with RTL8168g (chip version 40). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26r8169: enable EEE per default on chip versions from RTL8168gHeiner Kallweit1-0/+14
Enable EEE per default on chip versions from RTL8168g. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26r8169: add general EEE support for chip versions from RTL8168gHeiner Kallweit1-10/+192
This patch adds the general framework to deal with EEE in this driver plus EEE support for chip versions from RTL8168g. We don't touch the default chip settings, therefore EEE will usually be disabled and it's up to the user to enable it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 'ipv6-defrag-rbtree'David S. Miller8-660/+527
Peter Oskolkov says: ==================== net: IP defrag: use rbtrees in IPv6 defragmentation Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implementations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patchset contains four patches: - patch 1 moves rbtree-related code from IPv4 to files shared b/w IPv4/IPv6 - patch 2 changes IPv6 defragmenation code to use rbtrees for defrag queue - patch 3 changes nf_conntrack IPv6 defragmentation code to use rbtrees - patch 4 changes ip_defrag selftest to test changes made in the previous three patches. Along the way, the 1280-byte restrictions are removed. I plan to introduce similar changes to 6lowpan defragmentation code once I figure out how to test it. ==================== Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26selftests: net: ip_defrag: cover new IPv6 defrag behaviorPeter Oskolkov2-34/+51
This patch adds several changes to the ip_defrag selftest, to cover new IPv6 defrag behavior: - min IPv6 frag size is now 8 instead of 1280 - new test cases to cover IPv6 defragmentation in nf_conntrack_reasm.c - new "permissive" mode in negative (overlap) tests: netfilter sometimes drops invalid packets without passing them to IPv6 underneath, and thus defragmentation sometimes succeeds when it is expected to fail; so the permissive mode does not fail the test if the correct reassembled datagram is received instead of a timeout. Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: IP6 defrag: use rbtrees in nf_conntrack_reasm.cPeter Oskolkov1-189/+71
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: IP6 defrag: use rbtrees for IPv6 defragPeter Oskolkov2-173/+71
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26net: IP defrag: encapsulate rbtree defrag code into callable functionsPeter Oskolkov3-264/+334
This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. Signed-off-by: Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge branch 's390-qeth-next'David S. Miller5-337/+167
Julian Wiedmann says: ==================== s390/qeth: updates 2019-01-25 please apply a first batch of qeth patches for net-next, primarily touching the net_device parts of the driver. In addition to the usual refactoring & code consolidation, patch 7 makes use of netif_device_detach() to let the stack know when our control plane is down. This helps quite a bit wrt to overall locking and proper init/shutdown sequencing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: remove VLAN tracking for L2 devicesJulian Wiedmann4-63/+18
For recovery purposes, qeth keeps track of all registered VIDs. Replace this by using the infrastructure introduced in commit 9daae9bd47cf ("net: Call add/kill vid ndo on vlan filter feature toggling"). By managing NETIF_F_HW_VLAN_CTAG_FILTER as a hw_feature, netdev_update_features() will select it from dev->wanted_features and replay all of the netdevice's VIDs to its ndo_vlan_rx_add_vid() callback. z/VM NICs strictly require VLAN registration, so don't expose it as hw_feature there but add a little hack in qeth_enable_hw_features() to make things work regardless. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: detach netdevice while card is offlineJulian Wiedmann4-102/+20
When a qeth card is offline, it has no connection to the HW. So none of our control callbacks can run IO against it, and we can only cache the input (eg a new MAC address) without providing proper feedback to the caller. In this context, it seems much more reasonable to simply detach the netdevice and let the kernel reject any interaction with it. This also makes all sorts of internal state checks and locking obsolete. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: delay netdevice registrationJulian Wiedmann3-40/+43
Re-order the code flow a bit so that all initial HW setup is done before putting the netdevice into play. For a netdevice that hasn't been registered before, we also don't need to re-enable its HW features or check for recovery actions. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: remove TX disable from online pathJulian Wiedmann2-3/+0
At best this is redundant, at worst it papers over a race in the offline / online code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: register MAC address earlierJulian Wiedmann1-8/+12
commit 4789a2188048 ("s390/qeth: fix race when setting MAC address") resolved a race where our initial programming of dev_addr into the HW and a call to ndo_set_mac_address() could run concurrently. In this case, we could end up getting confused about which address was actually set in the HW. The quick fix was to introduce additional locking that blocks any ndo_set_mac_address() while the device is being set online. But the race primarily originated from the fact that we first register the netdevice, and only then program its dev_addr. By re-ordering this sequence, userspace will only be able to change the MAC address _after_ we have finished with setting the initial dev_addr. Still, the same MAC address race can also occur during a subsequent call to qeth_l2_set_online(). So keep around the locking for now, until a follow-up patch fully resolves this. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: consolidate open/stop netdev opsJulian Wiedmann4-124/+84
The L2 and L3 code for these ops is almost identical, we only need to provide a custom ndo_validate_addr() for L2 that checks whether programming the MAC address succeeded. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: remove bogus netif_wake_queue()Julian Wiedmann1-2/+0
qeth_qdio_cq_handler() doesn't replenish the Output Queue(s), and thus has no reason to wake the txq. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26s390/qeth: streamline TX buffer managementJulian Wiedmann1-19/+14
Consolidate the code that marks the current buffer to be flushed, and let qeth_fill_buffer() advance the Output Queue's buffer cursor. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Documentation: net: phy: reflect latest changes to phylib APIHeiner Kallweit1-8/+10
Recent changes to the phylib API - removed phy_stop_interrupts - replaced phy_start_interrupts with phy_request_interrupt - moved some functionality from phy_connect() and phy_disconnect() to phy_start() and phy_stop() respectively. Reflect these changes in the documentation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26Merge tag 'mlx5-updates-2019-01-25' of ↵David S. Miller10-152/+211
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-01-25 This series provides some updates to mlx5 driver, From Tariq, 1) Make sure RX packet header does not cross page boundary To avoid page boundary crossing, use stride size that fits the maximum possible header. Stride is increased form 64B to 256B. 2) CQ struct cleanup: Take CQ decompress fields into a separate structure From Moshe, 3) Expand XPS cpumask to cover all online cpus From Jason Gunthorpe and Tariq: 4) Compilation warning cleanup From Or, 5) Add trace points for flow tables create/destroy From Saeed, 6) Software stats update/folding improvements this also solves a compilation warning on 32bit systems that was reported last release cycle by Arnd and Andrew. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25net/mlx5e: Reuse fold sw stats in representorsSaeed Mahameed3-27/+10
Representors software stats are basic, this patch is reusing the mlx5e_fold_sw_stats in representors, which sums up the basic stats64 for a mlx5e netdevice. Fixes: 8bfaf07f7806 ("net/mlx5e: Present SW stats when state is not opened") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-25net/mlx5e: Present the representors SW stats when state is not openedTariq Toukan1-10/+7
This behavior is already adopted for all other cases in the cited patch. The representor's functions were missed, here we modify the them to behave similarly. Fixes: 8bfaf07f7806 ("net/mlx5e: Present SW stats when state is not opened") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-25net/mlx5e: Separate between ethtool and netdev software stats foldingSaeed Mahameed3-12/+25
mlx5e_grp_sw_update_stats can be called from two threads, 1) ndo_get_stats64 2) get_ethtool_stats For this reason and to minimize concurrency issue impact on 64bit machines mlx5e_grp_sw_update_stats folds the software stats into a temporary variable then copies it to the global driver stats, both ethtool and ndo statistics callbacks will use the global software stats variable to report whatever stats they need. Actually ndo_get_stats64 doesn't need to fold the whole software stats (mlx5e_grp_sw_update_stats), all it needs is five counters to fill the rtnl_link_stats64 relevant stats parameter. Hence this patch introduces a simpler helper function to fold software stats for ndo_get_stats64 which will work directly on rtnl_link_stats64 stats parameter and not on the global or even temporary mlx5e_sw_stats variable. Since now mlx5e_grp_sw_update_stats is not called by ndo_get_stats64 we can make it static and remove the temp var. Unlike mlx5e_grp_sw_update_stats the new fold stats function doesn't need to zero out the output statistics parameter since it is already done by the stack @dev_get_stats(). This patch is fixing stack usage of mlx5e_grp_sw_update_stats on x86 gcc-4.9 and higher, the concurrency issue between mlx5's ndo_get_stats64 and get_ethtool_stats is resolved as well. Fixes: 8bfaf07f7806 ("net/mlx5e: Present SW stats when state is not opened") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-25net/mlx5: Add trace points for flow tables create/destroyOr Gerlitz3-0/+39
We were not tracking flow tables so far, add it up. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 06:59:32 +0300