summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-02-09orinoco: Remove old mailing lists from MAINTAINERSDavid Gibson1-2/+0
The two orinoco mailing lists on sourceforge were set up many years ago and are now more or less moribund. I'd like to shut them down, so I don't have to keep filtering the spam from them (which is most of what comes through now). In preparation, this patch removes the reference to them from the MAINTAINERS file. Any remaining discussion of this approaching obsolete driver can go to the linux-wireless list. Signed-off-by: David Gibson <hermes@gibson.dropbear.id.au> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-07mac80211: call rate control only after initJohannes Berg4-3/+6
There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove set_hw_params callbackStanislaw Gruszka3-85/+59
We do not need that callback, settings parameters can be done locally. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove struct il_tx_infoStanislaw Gruszka6-69/+46
It's just wrapper to sk_buff pointers ... Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: merge il_base_params into il_cfgStanislaw Gruszka7-81/+83
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ops out of configStanislaw Gruszka10-167/+127
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx structureStanislaw Gruszka10-378/+261
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove il_setup_interface()Stanislaw Gruszka1-19/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->is_activeStanislaw Gruszka4-31/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_queueStanislaw Gruszka2-8/+2
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_fifoStanislaw Gruszka2-10/+8
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ht out of ctx structureStanislaw Gruszka4-49/+46
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move qos_data out of ctx structureStanislaw Gruszka3-19/+18
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove ctx interface_modesStanislaw Gruszka4-35/+8
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->station_flagsStanislaw Gruszka2-3/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move wep_keys out of contextStanislaw Gruszka2-38/+39
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of mcast_queueStanislaw Gruszka2-16/+4
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctxidStanislaw Gruszka5-14/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of *_devtypeStanislaw Gruszka4-11/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move bcast_sta_id to hw_paramsStanislaw Gruszka7-18/+19
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ap_sta_idStanislaw Gruszka4-5/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of wep_key_cmdStanislaw Gruszka3-5/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of qos_cmdStanislaw Gruszka4-4/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of rxon_assoc_cmdStanislaw Gruszka3-3/+0
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_timing_cmdStanislaw Gruszka4-4/+2
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_cmdStanislaw Gruszka4-6/+4
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move rxon commands out of ctx structureStanislaw Gruszka9-228/+205
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: update correct dtim_period in dump_station()Amitkumar Karwar4-9/+10
Earlier we were using dtim period extracted from scan response buffer provided by FW in scan operation. But it is observed that sometimes the buffer doesn't contain dtim period tlv, and wrong value (0) was sent to user space. After association FW will start listening to beacon frames of connected AP and store dtim period. Therefore we can get it from FW in dump_station() instead of using wrong value obtained in scanning. Redundant code after adapting new approach for dtim period is also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: cleanup in snmp_mib command preparation codeAmitkumar Karwar1-52/+8
1) Remove unnecessary switch case usage. 2) Replace "X=cpu_to_le16(le16_to_cpu(X) + Y)" by "le16_add_cpu(X, Y)" 3) Declare "ul_temp" variable as u16 instead of u32 to avoid unnecessary typecasting Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Fix PCI probe error path orphaned memoryTim Gardner1-7/+12
Memory allocated by ieee80211_alloc_hw() will get orphaned if any subsequent initializations fail. Also don't pci_set_drvdata(pdev, NULL) until just before disabling the PCI device. Functions called by rtl_deinit_core(hw) may eventually need the context (when its actually implemented). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: support hw scan while idleEliad Peller4-1/+12
Currently, mac80211 goes to idle-off before starting a scan. However, some devices that implement hw scan might not need going idle-off in order to perform a hw scan, and thus saving some energy and simplifying their state machine. (Note that this is also the case for sched scan - it currently doesn't make mac80211 go idle-off) Add a new flag to indicate support for hw scan while idle. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: enable HT operating modeAmitkumar Karwar1-0/+1
This patch sets default adapter channel_type as HT. Hence the device will opearate in HT mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: fix NULL pointer dereference in set_channel()Amitkumar Karwar1-1/+6
In set_channel() callback handler, "priv" pointer is derived from net_device. Sometimes net_device pointer coming from the stack is NULL which causes kernel crash. This patch fixes the problem by deriving "priv" from wiphy when net_device pointer is NULL. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwl8k: Remove BSSID from the firmware when the BSS is stoppedYogesh Ashok Powar1-9/+29
Using command DEL_MAC_ADDR, remove the mac address of the BSS when it is stopped i.e the corresponding vif is removed. Without this, the stale bss entry will still be maintained in the firmware which causes issues when the BSS's are recreated. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06ath9k: cleanup a min_t() castDan Carpenter1-1/+1
If the firmware was over 2G, it would cause memory corruption and the system would die here. Obviously we all know the firmware isn't going to be that large but static checkers get upset. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: off by one in mcs mask handlingDan Carpenter2-2/+2
"ridx" is used as an index into the mcs_mask[] array which has IEEE80211_HT_MCS_MASK_LEN elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06ssb: add support for bcm5354Hauke Mehrtens4-5/+53
This patch adds support the the BCM5354 SoC. It has a PMU and a constant not configurable clock. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06ssb: log the id, rev and pkg of the chip foundHauke Mehrtens1-0/+3
This makes us see what type of hardware someone uses by the dmesg output. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: log the id, rev and pkg of the chip foundHauke Mehrtens1-3/+7
This makes us see what type of hardware someone uses by the dmesg output. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211/mac80211: userspace peer authorization in IBSSAntonio Quartulli4-9/+24
If the IBSS network is RSN-protected, let userspace authorize the stations instead of adding them as AUTHORIZED by default. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Remove extra debugging message accidentally left inLarry Finger1-3/+1
In commit b0302aba812bcc39291cdab9ad7e37008f352a91, an extra debugging message that is spamming the logs was not deleted before submission. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Fix typo in dm.cMasanari Iida1-1/+1
Correct a spelling "disconnet" to "disconnect" in drivers/net/wireless/rtlwifi/rtl8192de/dm.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwmc3200wifi: Fix typo in trace.hMasanari Iida1-1/+1
Correct spelling "embeded" to "embedded" in drivers/net/wireless/iwmc3200wifi/trace.h Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: remove return in _rtl_pci_switch_clk_reqDevendra.Naga1-3/+1
the return value from _rtl_pci_switch_clk_req is not used by any of its callers. Signed-off-by: Devendra.Naga <devendra.aaru@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add extra sprom checkHauke Mehrtens2-0/+23
This check is needed on the BCM43224 device as it says in the capabilities it has an sprom but is extra check says it has not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add bus num counterHauke Mehrtens2-1/+12
If we have two bcma buses on one computer the second will not work without this patch. Now each bus gets an own number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add PCIe host controllerHauke Mehrtens6-39/+690
Some SoCs have a PCIe host controller to make it possible to attach some other devices to it, like an other Wifi card. This code was tested with an Netgear WNDR3400 (bcm4716 based), but should work with all bcma based SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: make some functions __devinitHauke Mehrtens6-10/+10
bcma_core_pci_hostmode_init() has to be in __devinit as it will call a function in that section and so all functions calling it also have to be in __devinit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: export bcma_pcie_read()Hauke Mehrtens2-1/+4
This will be needed by the host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add constants for PCI and use themHauke Mehrtens2-54/+155
There are many magic numbers used in the PCIe code. Replace them with some constants from the Broadcom SDK and also use them in the pcie host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>