summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-20Linux 4.10.17v4.10.17linux-4.10.yGreg Kroah-Hartman1-1/+1
2017-05-20pstore: Shut down worker when unregisteringKees Cook1-1/+9
commit 6330d5534786d5315d56d558aa6d20740f97d80a upstream. When built as a module and running with update_ms >= 0, pstore will Oops during module unload since the work timer is still running. This makes sure the worker is stopped before unloading. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20pstore: Fix flags to enable dumps on powerpcAnkit Kumar1-0/+1
commit 041939c1ec54208b42f5cd819209173d52a29d34 upstream. After commit c950fd6f201a kernel registers pstore write based on flag set. Pstore write for powerpc is broken as flags(PSTORE_FLAGS_DMESG) is not set for powerpc architecture. On panic, kernel doesn't write message to /fs/pstore/dmesg*(Entry doesn't gets created at all). This patch enables pstore write for powerpc architecture by setting PSTORE_FLAGS_DMESG flag. Fixes: c950fd6f201a ("pstore: Split pstore fragile flags") Signed-off-by: Ankit Kumar <ankit@linux.vnet.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20libnvdimm, pfn: fix 'npfns' vs section alignmentDan Williams1-2/+4
commit d5483feda85a8f39ee2e940e279547c686aac30c upstream. Fix failures to create namespaces due to the vmem_altmap not advertising enough free space to store the memmap. WARNING: CPU: 15 PID: 8022 at arch/x86/mm/init_64.c:656 arch_add_memory+0xde/0xf0 [..] Call Trace: dump_stack+0x63/0x83 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xde/0xf0 devm_memremap_pages+0x244/0x440 pmem_attach_disk+0x37e/0x490 [nd_pmem] nd_pmem_probe+0x7e/0xa0 [nd_pmem] nvdimm_bus_probe+0x71/0x120 [libnvdimm] driver_probe_device+0x2bb/0x460 bind_store+0x114/0x160 drv_attr_store+0x25/0x30 In commit 658922e57b84 "libnvdimm, pfn: fix memmap reservation sizing" we arranged for the capacity to be allocated, but failed to also update the 'npfns' parameter. This leads to cases where there is enough capacity reserved to hold all the allocated sections, but vmemmap_populate_hugepages() still encounters -ENOMEM from altmap_alloc_block_buf(). This fix is a stop-gap until we can teach the core memory hotplug implementation to permit sub-section hotplug. Fixes: 658922e57b84 ("libnvdimm, pfn: fix memmap reservation sizing") Reported-by: Anisha Allada <anisha.allada@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20libnvdimm: fix nvdimm_bus_lock() vs device_lock() orderingDan Williams4-11/+18
commit 452bae0aede774f87bf56c28b6dd50b72c78986c upstream. A debug patch to turn the standard device_lock() into something that lockdep can analyze yielded the following: ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0-rc4+ #106 Tainted: G O ------------------------------------------------------- lt-libndctl/1898 is trying to acquire lock: (&dev->nvdimm_mutex/3){+.+.+.}, at: [<ffffffffc023c948>] nd_attach_ndns+0x178/0x1b0 [libnvdimm] but task is already holding lock: (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffc022e0b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&nvdimm_bus->reconfig_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x88/0x980 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_namespace_capacity+0x1b/0x40 [libnvdimm] nvdimm_namespace_common_probe+0x230/0x510 [libnvdimm] nd_pmem_probe+0x14/0x180 [nd_pmem] nvdimm_bus_probe+0xa9/0x260 [libnvdimm] -> #0 (&dev->nvdimm_mutex/3){+.+.+.}: __lock_acquire+0x1107/0x1280 lock_acquire+0xf6/0x1f0 __mutex_lock+0x88/0x980 mutex_lock_nested+0x1b/0x20 nd_attach_ndns+0x178/0x1b0 [libnvdimm] nd_namespace_store+0x308/0x3c0 [libnvdimm] namespace_store+0x87/0x220 [libnvdimm] In this case '&dev->nvdimm_mutex/3' mirrors '&dev->mutex'. Fix this by replacing the use of device_lock() with nvdimm_bus_lock() to protect nd_{attach,detach}_ndns() operations. Fixes: 8c2f7e8658df ("libnvdimm: infrastructure for btt devices") Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notifyToshi Kani1-12/+25
commit b2518c78ce76896f0f8f7940bf02104b227e1709 upstream. The following BUG was observed when nd_pmem_notify() was called for a BTT device. The use of a pmem_device pointer is not valid with BTT. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: nd_pmem_notify+0x30/0xf0 [nd_pmem] Call Trace: nd_device_notify+0x40/0x50 child_notify+0x10/0x20 device_for_each_child+0x50/0x90 nd_region_notify+0x20/0x30 nd_device_notify+0x40/0x50 nvdimm_region_notify+0x27/0x30 acpi_nfit_scrub+0x341/0x590 [nfit] process_one_work+0x197/0x450 worker_thread+0x4e/0x4a0 kthread+0x109/0x140 Fix nd_pmem_notify() by setting nd_region and badblocks pointers properly for BTT. Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: 719994660c24 ("libnvdimm: async notification support") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20libnvdimm, region: fix flush hint detection crashDan Williams1-4/+7
commit bc042fdfbb92b5b13421316b4548e2d6e98eed37 upstream. In the case where a dimm does not have any associated flush hints the ndrd->flush_wpq array may be uninitialized leading to crashes with the following signature: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: region_visible+0x10f/0x160 [libnvdimm] Call Trace: internal_create_group+0xbe/0x2f0 sysfs_create_groups+0x40/0x80 device_add+0x2d8/0x650 nd_async_device_register+0x12/0x40 [libnvdimm] async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x6c0 ? process_one_work+0x197/0x6c0 worker_thread+0x4e/0x4a0 kthread+0x10c/0x140 ? process_one_work+0x6c0/0x6c0 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Fixes: f284a4f23752 ("libnvdimm: introduce nvdimm_flush() and nvdimm_has_flush()") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20ipmi: Fix kernel panic at ipmi_ssif_thread()Joeseph Chang1-1/+3
commit 6de65fcfdb51835789b245203d1bfc8d14cb1e06 upstream. msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by: Joeseph Chang <joechang@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Bluetooth: hci_intel: add missing tty-device sanity checkJohan Hovold1-1/+12
commit dcb9cfaa5ea9aa0ec08aeb92582ccfe3e4c719a9 upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Cc: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Bluetooth: hci_bcm: add missing tty-device sanity checkJohan Hovold1-1/+4
commit 95065a61e9bf25fb85295127fba893200c2bbbd8 upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices") Cc: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Bluetooth: Fix user channel for 32bit userspace on 64bit kernelSzymon Janc1-1/+2
commit ab89f0bdd63a3721f7cd3f064f39fc4ac7ca14d4 upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marko Kiiskila <marko@runtime.io> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20tty: pty: Fix ldisc flush after userspace become aware of the data alreadyWang YanQing1-6/+1
commit 77dae6134440420bac334581a3ccee94cee1c054 upstream. While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da12e7 ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da12e7 ("pty: Fix buffer flush deadlock") Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: suspend device on probe errorsJohan Hovold1-1/+2
commit 77e6fe7fd2b7cba0bf2f2dc8cde51d7b9a35bf74 upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: fix runtime-pm handling on unbindJohan Hovold1-1/+5
commit 099bd73dc17ed77aa8c98323e043613b6e8f54fc upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: samsung: Use right device for DMA-mapping callsMarek Szyprowski1-5/+4
commit 768d64f491a530062ddad50e016fb27125f8bd7c upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20fscrypt: fix context consistency check when key(s) unavailableEric Biggers1-19/+68
commit 272f98f6846277378e1758a49a49d7bf39343c02 upstream. To mitigate some types of offline attacks, filesystem encryption is designed to enforce that all files in an encrypted directory tree use the same encryption policy (i.e. the same encryption context excluding the nonce). However, the fscrypt_has_permitted_context() function which enforces this relies on comparing struct fscrypt_info's, which are only available when we have the encryption keys. This can cause two incorrect behaviors: 1. If we have the parent directory's key but not the child's key, or vice versa, then fscrypt_has_permitted_context() returned false, causing applications to see EPERM or ENOKEY. This is incorrect if the encryption contexts are in fact consistent. Although we'd normally have either both keys or neither key in that case since the master_key_descriptors would be the same, this is not guaranteed because keys can be added or removed from keyrings at any time. 2. If we have neither the parent's key nor the child's key, then fscrypt_has_permitted_context() returned true, causing applications to see no error (or else an error for some other reason). This is incorrect if the encryption contexts are in fact inconsistent, since in that case we should deny access. To fix this, retrieve and compare the fscrypt_contexts if we are unable to set up both fscrypt_infos. While this slightly hurts performance when accessing an encrypted directory tree without the key, this isn't a case we really need to be optimizing for; access *with* the key is much more important. Furthermore, the performance hit is barely noticeable given that we are already retrieving the fscrypt_context and doing two keyring searches in fscrypt_get_encryption_info(). If we ever actually wanted to optimize this case we might start by caching the fscrypt_contexts. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20f2fs: fix fs corruption due to zero inode pageJaegeuk Kim2-11/+11
commit 9bb02c3627f46e50246bf7ab957b56ffbef623cb upstream. This patch fixes the following scenario. - f2fs_create/f2fs_mkdir - write_checkpoint - f2fs_mark_inode_dirty_sync - block_operations - f2fs_lock_all - f2fs_sync_inode_meta - f2fs_unlock_all - sync_inode_metadata - f2fs_lock_op - f2fs_write_inode - update_inode_page - get_node_page return -ENOENT - new_inode_page - fill_node_footer - f2fs_mark_inode_dirty_sync - ... - f2fs_unlock_op - f2fs_inode_synced - f2fs_lock_all - do_checkpoint In this checkpoint, we can get an inode page which contains zeros having valid node footer only. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20mm: fix data corruption due to stale mmap readsJan Kara2-1/+12
commit cd656375f94632d7b5af57bf67b7b5c0270c591c upstream. Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c23d2d3fb5235cec42d7dd3f786b87d55 Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20dax: prevent invalidation of mapped DAX entriesRoss Zwisler3-36/+3
commit 4636e70bb0a8b871998b6841a2e4b205cf2bc863 upstream. Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c23d2 ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.cz Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20device-dax: fix sysfs attribute deadlockDan Williams1-28/+12
commit 565851c972b50612f3a4542e26879ffb3e906fc2 upstream. Usage of device_lock() for dax_region attributes is unnecessary and deadlock prone. It's unnecessary because the order of registration / un-registration guarantees that drvdata is always valid. It's deadlock prone because it sets up this situation: ndctl D 0 2170 2082 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x402/0x980 ? __mutex_lock+0x158/0x980 ? align_show+0x2b/0x80 [dax] ? kernfs_seq_start+0x2f/0x90 mutex_lock_nested+0x1b/0x20 align_show+0x2b/0x80 [dax] dev_attr_show+0x20/0x50 ndctl D 0 2186 2079 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 __kernfs_remove+0x1f6/0x340 ? kernfs_remove_by_name_ns+0x45/0xa0 ? remove_wait_queue+0x70/0x70 kernfs_remove_by_name_ns+0x45/0xa0 remove_files.isra.1+0x35/0x70 sysfs_remove_group+0x44/0x90 sysfs_remove_groups+0x2e/0x50 dax_region_unregister+0x25/0x40 [dax] devm_action_release+0xf/0x20 release_nodes+0x16d/0x2b0 devres_release_all+0x3c/0x60 device_release_driver_internal+0x17d/0x220 device_release_driver+0x12/0x20 unbind_store+0x112/0x160 ndctl/2170 is trying to acquire the device_lock() to read an attribute, and ndctl/2186 is holding the device_lock() while trying to drain all active attribute readers. Thanks to Yi Zhang for the reproduction script. Fixes: d7fe1a67f658 ("dax: add region 'id', 'size', and 'align' attributes") Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20device-dax: fix cdev leakDan Williams1-4/+11
commit ed01e50acdd3e4a640cf9ebd28a7e810c3ceca97 upstream. If device_add() fails, cleanup the cdev. Otherwise, we leak a kobj_map() with a stale device number. As Jason points out, there is a small possibility that userspace has opened and mapped the device in the time between cdev_add() and the device_add() failure. We need a new kill_dax_dev() helper to invalidate any established mappings. Fixes: ba09c01d2fa8 ("dax: convert to the cdev api") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20md/raid1: avoid reusing a resync bio after error handling.NeilBrown1-0/+2
commit 0c9d5b127f695818c2c5a3868c1f28ca2969e905 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by: Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20padata: free correct variableJason A. Donenfeld1-1/+1
commit 07a77929ba672d93642a56dc2255dd21e6e2290b upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20ovl: do not set overlay.opaque on non-dir createAmir Goldstein1-1/+1
commit 4a99f3c83dc493c8ea84693d78cd792839c8aa64 upstream. The optimization for opaque dir create was wrongly being applied also to non-dir create. Fixes: 97c684cc9110 ("ovl: create directories inside merged parent opaque") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20CIFS: add misssing SFM mapping for doublequoteBjörn Jacke2-0/+7
commit 85435d7a15294f9f7ef23469e6aaf7c5dfcc54f0 upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by: Bjoern Jacke <bjacke@samba.org> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20cifs: fix CIFS_IOC_GET_MNT_INFO oopsDavid Disseldorp1-0/+2
commit d8a6e505d6bba2250852fbc1c1c86fe68aaf9af3 upstream. An open directory may have a NULL private_data pointer prior to readdir. Fixes: 0de1f4c6f6c0 ("Add way to query server fs info for smb3") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20CIFS: fix oplock break deadlocksRabin Vincent4-5/+18
commit 3998e6b87d4258a70df358296d6f1c7234012bfe upstream. When the final cifsFileInfo_put() is called from cifsiod and an oplock break work is queued, lockdep complains loudly: ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #21 Not tainted --------------------------------------------- kworker/0:2/78 is trying to acquire lock: ("cifsiod"){++++.+}, at: flush_work+0x215/0x350 but task is already holding lock: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock("cifsiod"); lock("cifsiod"); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by kworker/0:2/78: #0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 #1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0 stack backtrace: CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21 Workqueue: cifsiod cifs_writev_complete Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? match_held_lock+0x20/0x2b0 ? trace_hardirqs_off_caller+0x86/0x130 ? mark_lock+0xa6/0x920 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? flush_work+0x215/0x350 flush_work+0x236/0x350 ? flush_work+0x215/0x350 ? destroy_worker+0x170/0x170 __cancel_work_timer+0x17d/0x210 ? ___preempt_schedule+0x16/0x18 cancel_work_sync+0x10/0x20 cifsFileInfo_put+0x338/0x7f0 cifs_writedata_release+0x2a/0x40 ? cifs_writedata_release+0x2a/0x40 cifs_writev_complete+0x29d/0x850 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 This is a real warning. Since the oplock is queued on the same workqueue this can deadlock if there is only one worker thread active for the workqueue (which will be the case during memory pressure when the rescuer thread is handling it). Furthermore, there is at least one other kind of hang possible due to the oplock break handling if there is only worker. (This can be reproduced without introducing memory pressure by having passing 1 for the max_active parameter of cifsiod.) cifs_oplock_break() can wait indefintely in the filemap_fdatawait() while the cifs_writev_complete() work is blocked: sysrq: SysRq : Show Blocked State task PC stack pid father kworker/0:1 D 0 16 2 0x00000000 Workqueue: cifsiod cifs_oplock_break Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x4a/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 cifs_oplock_break+0x651/0x710 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 dd D 0 683 171 0x00000000 Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x29/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 filemap_write_and_wait+0x4e/0x70 cifs_flush+0x6a/0xb0 filp_close+0x52/0xa0 __close_fd+0xdc/0x150 SyS_close+0x33/0x60 entry_SYSCALL_64_fastpath+0x1f/0xbe Showing all locks held in the system: 2 locks held by kworker/0:1/16: #0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0 #1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0 Showing busy workqueues and worker pools: workqueue cifsiod: flags=0xc pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1 in-flight: 16:cifs_oplock_break delayed: cifs_writev_complete, cifs_echo_request pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3 Fix these problems by creating a a new workqueue (with a rescuer) for the oplock break work. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20cifs: fix CIFS_ENUMERATE_SNAPSHOTS oopsDavid Disseldorp1-0/+2
commit 6026685de33b0db5b2b6b0e9b41b3a1a3261033c upstream. As with 618763958b22, an open directory may have a NULL private_data pointer prior to readdir. CIFS_ENUMERATE_SNAPSHOTS must check for this before dereference. Fixes: 834170c85978 ("Enable previous version support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20cifs: fix leak in FSCTL_ENUM_SNAPS response handlingDavid Disseldorp1-0/+1
commit 0e5c795592930d51fd30d53a2e7b73cba022a29b upstream. The server may respond with success, and an output buffer less than sizeof(struct smb_snapshot_array) in length. Do not leak the output buffer in this case. Fixes: 834170c85978 ("Enable previous version support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20CIFS: fix mapping of SFM_SPACE and SFM_PERIODBjörn Jacke1-2/+2
commit b704e70b7cf48f9b67c07d585168e102dfa30bb4 upstream. - trailing space maps to 0xF028 - trailing period maps to 0xF029 This fix corrects the mapping of file names which have a trailing character that would otherwise be illegal (period or space) but is allowed by POSIX. Signed-off-by: Bjoern Jacke <bjacke@samba.org> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20SMB3: Work around mount failure when using SMB3 dialect to MacsSteve French1-3/+11
commit 7db0a6efdc3e990cdfd4b24820d010e9eb7890ad upstream. Macs send the maximum buffer size in response on ioctl to validate negotiate security information, which causes us to fail the mount as the response buffer is larger than the expected response. Changed ioctl response processing to allow for padding of validate negotiate ioctl response and limit the maximum response size to maximum buffer size. Signed-off-by: Steve French <steve.french@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Set unicode flag on cifs echo request to avoid Mac errorSteve French1-0/+3
commit 26c9cb668c7fbf9830516b75d8bee70b699ed449 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Fix match_prepath()Sachin Prabhu1-8/+6
commit cd8c42968ee651b69e00f8661caff32b0086e82d upstream. Incorrect return value for shares not using the prefix path means that we will never match superblocks for these shares. Fixes: commit c1d8b24d1819 ("Compare prepaths when comparing superblocks") Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20mm: prevent potential recursive reclaim due to clearing PF_MEMALLOCVlastimil Babka1-1/+2
commit 62be1511b1db8066220b18b7d4da2e6b9fdc69fb upstream. Patch series "more robust PF_MEMALLOC handling" This series aims to unify the setting and clearing of PF_MEMALLOC, which prevents recursive reclaim. There are some places that clear the flag unconditionally from current->flags, which may result in clearing a pre-existing flag. This already resulted in a bug report that Patch 1 fixes (without the new helpers, to make backporting easier). Patch 2 introduces the new helpers, modelled after existing memalloc_noio_* and memalloc_nofs_* helpers, and converts mm core to use them. Patches 3 and 4 convert non-mm code. This patch (of 4): __alloc_pages_direct_compact() sets PF_MEMALLOC to prevent deadlock during page migration by lock_page() (see the comment in __unmap_and_move()). Then it unconditionally clears the flag, which can clear a pre-existing PF_MEMALLOC flag and result in recursive reclaim. This was not a problem until commit a8161d1ed609 ("mm, page_alloc: restructure direct compaction handling in slowpath"), because direct compation was called only after direct reclaim, which was skipped when PF_MEMALLOC flag was set. Even now it's only a theoretical issue, as the new callsite of __alloc_pages_direct_compact() is reached only for costly orders and when gfp_pfmemalloc_allowed() is true, which means either __GFP_NOMEMALLOC is in gfp_flags or in_interrupt() is true. There is no such known context, but let's play it safe and make __alloc_pages_direct_compact() robust for cases where PF_MEMALLOC is already set. Fixes: a8161d1ed609 ("mm, page_alloc: restructure direct compaction handling in slowpath") Link: http://lkml.kernel.org/r/20170405074700.29871-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20fs/block_dev: always invalidate cleancache in invalidate_bdev()Andrey Ryabinin1-6/+5
commit a5f6a6a9c72eac38a7fadd1a038532bc8516337c upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20ceph: fix memory leak in __ceph_setxattr()Luis Henriques1-0/+3
commit eeca958dce0a9231d1969f86196653eb50fcc9b3 upstream. The ceph_inode_xattr needs to be released when removing an xattr. Easily reproducible running the 'generic/020' test from xfstests or simply by doing: attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test While there, also fix the error path. Here's the kmemleak splat: unreferenced object 0xffff88001f86fbc0 (size 64): comm "attr", pid 244, jiffies 4294904246 (age 98.464s) hex dump (first 32 bytes): 40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff @........28..... 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ backtrace: [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0 [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0 [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820 [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40 [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60 [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0 [<ffffffff8111fdd1>] removexattr+0x41/0x60 [<ffffffff8111fe65>] path_removexattr+0x75/0xa0 [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10 [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20fs/xattr.c: zero out memory copied to userspace in getxattrMichal Hocko1-1/+1
commit 81be3dee96346fbe08c31be5ef74f03f6b63cf68 upstream. getxattr uses vmalloc to allocate memory if kzalloc fails. This is filled by vfs_getxattr and then copied to the userspace. vmalloc, however, doesn't zero out the memory so if the specific implementation of the xattr handler is sloppy we can theoretically expose a kernel memory. There is no real sign this is really the case but let's make sure this will not happen and use vzalloc instead. Fixes: 779302e67835 ("fs/xattr.c:getxattr(): improve handling of allocation failures") Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.org Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20orangefs: do not check possibly stale size on truncateMartin Brandenburg1-2/+1
commit 53950ef541675df48c219a8d665111a0e68dfc2f upstream. Let the server figure this out because our size might be out of date or not present. The bug was that xfs_io -f -t -c "pread -v 0 100" /mnt/foo echo "Test" > /mnt/foo xfs_io -f -t -c "pread -v 0 100" /mnt/foo fails because the second truncate did not happen if nothing had requested the size after the write in echo. Thus i_size was zero (not present) and the orangefs_setattr though i_size was zero and there was nothing to do. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20orangefs: do not set getattr_time on orangefs_lookupMartin Brandenburg1-2/+0
commit 17930b252cd6f31163c259eaa99dd8aa630fb9ba upstream. Since orangefs_lookup calls orangefs_iget which calls orangefs_inode_getattr, getattr_time will get set. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20orangefs: clean up oversize xattr validationMartin Brandenburg1-17/+7
commit e675c5ec51fe2554719a7b6bcdbef0a770f2c19b upstream. Also don't check flags as this has been validated by the VFS already. Fix an off-by-one error in the max size checking. Stop logging just because userspace wants to write attributes which do not fit. This and the previous commit fix xfstests generic/020. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20orangefs: fix bounds check for listxattrMartin Brandenburg1-1/+1
commit a956af337b9ff25822d9ce1a59c6ed0c09fc14b9 upstream. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20ext4: evict inline data when writing to memory mapEric Biggers1-0/+5
commit 7b4cc9787fe35b3ee2dfb1c35e22eafc32e00c33 upstream. Currently the case of writing via mmap to a file with inline data is not handled. This is maybe a rare case since it requires a writable memory map of a very small file, but it is trivial to trigger with on inline_data filesystem, and it causes the 'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in ext4_writepages() to be hit: mkfs.ext4 -O inline_data /dev/vdb mount /dev/vdb /mnt xfs_io -f /mnt/file \ -c 'pwrite 0 1' \ -c 'mmap -w 0 1m' \ -c 'mwrite 0 1' \ -c 'fsync' kernel BUG at fs/ext4/inode.c:2723! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff88003d3a8040 task.stack: ffffc90000300000 RIP: 0010:ext4_writepages+0xc89/0xf8a RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283 RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246 RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5 R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698 R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0 Call Trace: ? _raw_spin_unlock+0x27/0x2a ? kvm_clock_read+0x1e/0x20 do_writepages+0x23/0x2c ? do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x80/0x87 filemap_write_and_wait_range+0x67/0x8c ext4_sync_file+0x20e/0x472 vfs_fsync_range+0x8e/0x9f ? syscall_trace_enter+0x25b/0x2d0 vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 do_syscall_64+0x69/0x131 entry_SYSCALL64_slow_path+0x25/0x25 We could try to be smart and keep the inline data in this case, or at least support delayed allocation when allocating the block, but these solutions would be more complicated and don't seem worthwhile given how rare this case seems to be. So just fix the bug by calling ext4_convert_inline_data() when we're asked to make a page writable, so that any inline data gets evicted, with the block allocated immediately. Reported-by: Nick Alcock <nick.alcock@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20jbd2: fix dbench4 performance regression for 'nobarrier' mountsJan Kara1-1/+1
commit 5052b069acf73866d00077d8bc49983c3ee903e5 upstream. Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_FUA implementation. Since JBD2 strips REQ_FUA and REQ_FLUSH flags from submitted IO when the filesystem is mounted with nobarrier mount option, journal superblock writes ended up being async writes after this patch and that caused heavy performance regression for dbench4 benchmark with high number of processes. In my test setup with HP RAID array with non-volatile write cache and 32 GB ram, dbench4 runs with 8 processes regressed by ~25%. Fix the problem by making sure journal superblock writes are always treated as synchronous since they generally block progress of the journalling machinery and thus the whole filesystem. Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20perf annotate s390: Implement jump types for perf annotateChristian Borntraeger2-0/+32
commit d9f8dfa9baf9b6ae1f2f84f887176558ecde5268 upstream. Implement simple detection for all kind of jumps and branches. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-s390 <linux-s390@vger.kernel.org> Link: http://lkml.kernel.org/r/1491465112-45819-3-git-send-email-borntraeger@de.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20perf annotate s390: Fix perf annotate error -95 (4.10 regression)Christian Borntraeger1-0/+6
commit e77852b32d6d4430c68c38aaf73efe5650fa25af upstream. since 4.10 perf annotate exits on s390 with an "unknown error -95". Turns out that commit 786c1b51844d ("perf annotate: Start supporting cross arch annotation") added a hard requirement for architecture support when objdump is used but only provided x86 and arm support. Meanwhile power was added so lets add s390 as well. While at it make sure to implement the branch and jump types. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-s390 <linux-s390@vger.kernel.org> Fixes: 786c1b51844 "perf annotate: Start supporting cross arch annotation" Link: http://lkml.kernel.org/r/1491465112-45819-2-git-send-email-borntraeger@de.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20perf auxtrace: Fix no_size logic in addr_filter__resolve_kernel_syms()Adrian Hunter1-2/+2
commit c3a0bbc7ad7598dec5a204868bdf8a2b1b51df14 upstream. Address filtering with kernel symbols incorrectly resulted in the error "Cannot determine size of symbol" because the no_size logic was the wrong way around. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1490357752-27942-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20IB/hfi1: Prevent kernel QP post send hard lockupsMike Marciniszyn3-14/+22
commit b6eac931b9bb2bce4db7032c35b41e5e34ec22a5 upstream. The driver progress routines can call cond_resched() when a timeslice is exhausted and irqs are enabled. If the ULP had been holding a spin lock without disabling irqs and the post send directly called the progress routine, the cond_resched() could yield allowing another thread from the same ULP to deadlock on that same lock. Correct by replacing the current hfi1_do_send() calldown with a unique one for post send and adding an argument to hfi1_do_send() to indicate that the send engine is running in a thread. If the routine is not running in a thread, avoid calling cond_resched(). Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20IB/mlx4: Reduce SRIOV multicast cleanup warning message to debug levelJack Morgenstein1-1/+2
commit fb7a91746af18b2ebf596778b38a709cdbc488d3 upstream. A warning message during SRIOV multicast cleanup should have actually been a debug level message. The condition generating the warning does no harm and can fill the message log. In some cases, during testing, some tests were so intense as to swamp the message log with these warning messages, causing a stall in the console message log output task. This stall caused an NMI to be sent to all CPUs (so that they all dumped their stacks into the message log). Aside from the message flood causing an NMI, the tests all passed. Once the message flood which caused the NMI is removed (by reducing the warning message to debug level), the NMI no longer occurs. Sample message log (console log) output illustrating the flood and resultant NMI (snippets with comments and modified with ... instead of hex digits, to satisfy checkpatch.pl): <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!... *** About 4000 almost identical lines in less than one second *** <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!... INFO: rcu_sched detected stalls on CPUs/tasks: { 17} (...) *** { 17} above indicates that CPU 17 was the one that stalled *** sending NMI to all CPUs: ... NMI backtrace for cpu 17 CPU: 17 PID: 45909 Comm: kworker/17:2 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 09/08/2013 Workqueue: events fb_flashcursor task: ffff880478...... ti: ffff88064e...... task.ti: ffff88064e...... RIP: 0010:[ffffffff81......] [ffffffff81......] io_serial_in+0x15/0x20 RSP: 0018:ffff88064e257cb0 EFLAGS: 00000002 RAX: 0000000000...... RBX: ffffffff81...... RCX: 0000000000...... RDX: 0000000000...... RSI: 0000000000...... RDI: ffffffff81...... RBP: ffff88064e...... R08: ffffffff81...... R09: 0000000000...... R10: 0000000000...... R11: ffff88064e...... R12: 0000000000...... R13: 0000000000...... R14: ffffffff81...... R15: 0000000000...... FS: 0000000000......(0000) GS:ffff8804af......(0000) knlGS:000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080...... CR2: 00007f2a2f...... CR3: 0000000001...... CR4: 0000000000...... DR0: 0000000000...... DR1: 0000000000...... DR2: 0000000000...... DR3: 0000000000...... DR6: 00000000ff...... DR7: 0000000000...... Stack: ffff88064e...... ffffffff81...... ffffffff81...... 0000000000...... ffffffff81...... ffff88064e...... ffffffff81...... ffffffff81...... ffffffff81...... ffff88064e...... ffffffff81...... 0000000000...... Call Trace: [<ffffffff813d099b>] wait_for_xmitr+0x3b/0xa0 [<ffffffff813d0b5c>] serial8250_console_putchar+0x1c/0x30 [<ffffffff813d0b40>] ? serial8250_console_write+0x140/0x140 [<ffffffff813cb5fa>] uart_console_write+0x3a/0x80 [<ffffffff813d0aae>] serial8250_console_write+0xae/0x140 [<ffffffff8107c4d1>] call_console_drivers.constprop.15+0x91/0xf0 [<ffffffff8107d6cf>] console_unlock+0x3bf/0x400 [<ffffffff813503cd>] fb_flashcursor+0x5d/0x140 [<ffffffff81355c30>] ? bit_clear+0x120/0x120 [<ffffffff8109d5fb>] process_one_work+0x17b/0x470 [<ffffffff8109e3cb>] worker_thread+0x11b/0x400 [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5aef>] kthread+0xcf/0xe0 [<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645858>] ret_from_fork+0x58/0x90 [<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140 Code: 48 89 e5 d3 e6 48 63 f6 48 03 77 10 8b 06 5d c3 66 0f 1f 44 00 00 66 66 66 6 As indicated in the stack trace above, the console output task got swamped. Fixes: b9c5d6a64358 ("IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20IB/mlx4: Fix ib device initialization error flowJack Morgenstein1-0/+1
commit 99e68909d5aba1861897fe7afc3306c3c81b6de0 upstream. In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs. However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not called to free the allocated EQs. Fixes: e605b743f33d ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20IB/IPoIB: ibX: failed to create mcg debug fileShamir Rabinovitch3-8/+42
commit 771a52584096c45e4565e8aabb596eece9d73d61 upstream. When udev renames the netdev devices, ipoib debugfs entries does not get renamed. As a result, if subsequent probe of ipoib device reuse the name then creating a debugfs entry for the new device would fail. Also, moved ipoib_create_debug_files and ipoib_delete_debug_files as part of ipoib event handling in order to avoid any race condition between these. Fixes: 1732b0ef3b3a ([IPoIB] add path record information in debugfs) Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-21 01:26:09 +0300