diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/testing/selftests/firmware/Makefile | 2 | ||||
| -rwxr-xr-x | tools/testing/selftests/firmware/fw_fallback.sh | 224 | ||||
| -rwxr-xr-x | tools/testing/selftests/firmware/fw_userhelper.sh | 99 |
3 files changed, 225 insertions, 100 deletions
diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile index 9bf82234855b..1894d625af2d 100644 --- a/tools/testing/selftests/firmware/Makefile +++ b/tools/testing/selftests/firmware/Makefile @@ -3,7 +3,7 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -TEST_PROGS := fw_filesystem.sh fw_userhelper.sh +TEST_PROGS := fw_filesystem.sh fw_fallback.sh include ../lib.mk diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh new file mode 100755 index 000000000000..2e4c22d5abf7 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_fallback.sh @@ -0,0 +1,224 @@ +#!/bin/sh +# This validates that the kernel will fall back to using the fallback mechanism +# to load firmware it can't find on disk itself. We must request a firmware +# that the kernel won't find, and any installed helper (e.g. udev) also +# won't find so that we can do the load ourself manually. +set -e + +modprobe test_firmware + +DIR=/sys/devices/virtual/misc/test_firmware + +# CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/ +# These days no one enables CONFIG_FW_LOADER_USER_HELPER so check for that +# as an indicator for CONFIG_FW_LOADER_USER_HELPER. +HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi) + +if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + OLD_TIMEOUT=$(cat /sys/class/firmware/timeout) +else + echo "usermode helper disabled so ignoring test" + exit 0 +fi + +FWPATH=$(mktemp -d) +FW="$FWPATH/test-firmware.bin" + +test_finish() +{ + echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout + rm -f "$FW" + rmdir "$FWPATH" +} + +load_fw() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_cancel() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_custom() +{ + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + + +load_fw_custom_cancel() +{ + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + + +trap "test_finish" EXIT + +# This is an unlikely real-world firmware content. :) +echo "ABCD0123" >"$FW" +NAME=$(basename "$FW") + +DEVPATH="$DIR"/"nope-$NAME"/loading + +# Test failure when doing nothing (timeout works). +echo -n 2 >/sys/class/firmware/timeout +echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & + +# Give the kernel some time to load the loading file, must be less +# than the timeout above. +sleep 1 +if [ ! -f $DEVPATH ]; then + echo "$0: fallback mechanism immediately cancelled" + echo "" + echo "The file never appeared: $DEVPATH" + echo "" + echo "This might be a distribution udev rule setup by your distribution" + echo "to immediately cancel all fallback requests, this must be" + echo "removed before running these tests. To confirm look for" + echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules" + echo "and see if you have something like this:" + echo "" + echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\"" + echo "" + echo "If you do remove this file or comment out this line before" + echo "proceeding with these tests." + exit 1 +fi + +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 +else + echo "$0: timeout works" +fi + +# Put timeout high enough for us to do work but not so long that failures +# slow down this test too much. +echo 4 >/sys/class/firmware/timeout + +# Load this script instead of the desired firmware. +load_fw "$NAME" "$0" +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 +else + echo "$0: firmware comparison works" +fi + +# Do a proper load, which should work correctly. +load_fw "$NAME" "$FW" +if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 +else + echo "$0: fallback mechanism works" +fi + +load_fw_cancel "nope-$NAME" "$FW" +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 +else + echo "$0: cancelling fallback mechanism works" +fi + +load_fw_custom "$NAME" "$FW" +if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 +else + echo "$0: custom fallback loading mechanism works" +fi + +load_fw_custom_cancel "nope-$NAME" "$FW" +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 +else + echo "$0: cancelling custom fallback mechanism works" +fi + +exit 0 diff --git a/tools/testing/selftests/firmware/fw_userhelper.sh b/tools/testing/selftests/firmware/fw_userhelper.sh deleted file mode 100755 index b9983f8e09f6..000000000000 --- a/tools/testing/selftests/firmware/fw_userhelper.sh +++ /dev/null @@ -1,99 +0,0 @@ -#!/bin/sh -# This validates that the kernel will fall back to using the user helper -# to load firmware it can't find on disk itself. We must request a firmware -# that the kernel won't find, and any installed helper (e.g. udev) also -# won't find so that we can do the load ourself manually. -set -e - -modprobe test_firmware - -DIR=/sys/devices/virtual/misc/test_firmware - -# CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/ -# These days no one enables CONFIG_FW_LOADER_USER_HELPER so check for that -# as an indicator for CONFIG_FW_LOADER_USER_HELPER. -HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi) - -if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then - OLD_TIMEOUT=$(cat /sys/class/firmware/timeout) -else - echo "usermode helper disabled so ignoring test" - exit 0 -fi - -FWPATH=$(mktemp -d) -FW="$FWPATH/test-firmware.bin" - -test_finish() -{ - echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout - rm -f "$FW" - rmdir "$FWPATH" -} - -load_fw() -{ - local name="$1" - local file="$2" - - # This will block until our load (below) has finished. - echo -n "$name" >"$DIR"/trigger_request & - - # Give kernel a chance to react. - local timeout=10 - while [ ! -e "$DIR"/"$name"/loading ]; do - sleep 0.1 - timeout=$(( $timeout - 1 )) - if [ "$timeout" -eq 0 ]; then - echo "$0: firmware interface never appeared" >&2 - exit 1 - fi - done - - echo 1 >"$DIR"/"$name"/loading - cat "$file" >"$DIR"/"$name"/data - echo 0 >"$DIR"/"$name"/loading - - # Wait for request to finish. - wait -} - -trap "test_finish" EXIT - -# This is an unlikely real-world firmware content. :) -echo "ABCD0123" >"$FW" -NAME=$(basename "$FW") - -# Test failure when doing nothing (timeout works). -echo 1 >/sys/class/firmware/timeout -echo -n "$NAME" >"$DIR"/trigger_request -if diff -q "$FW" /dev/test_firmware >/dev/null ; then - echo "$0: firmware was not expected to match" >&2 - exit 1 -else - echo "$0: timeout works" -fi - -# Put timeout high enough for us to do work but not so long that failures -# slow down this test too much. -echo 4 >/sys/class/firmware/timeout - -# Load this script instead of the desired firmware. -load_fw "$NAME" "$0" -if diff -q "$FW" /dev/test_firmware >/dev/null ; then - echo "$0: firmware was not expected to match" >&2 - exit 1 -else - echo "$0: firmware comparison works" -fi - -# Do a proper load, which should work correctly. -load_fw "$NAME" "$FW" -if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then - echo "$0: firmware was not loaded" >&2 - exit 1 -else - echo "$0: user helper firmware loading works" -fi - -exit 0 |