diff options
Diffstat (limited to 'tools/testing/selftests')
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh new file mode 100755 index 000000000000..418319f19108 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh @@ -0,0 +1,248 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP +# tag and are prioritized according to the map at $swp1. They egress $swp2 and +# the DSCP value is updated to match the map at that interface. The updated DSCP +# tag is verified at $h2. +# +# ICMP responses are produced with the same DSCP tag that arrived at $h2. They +# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is +# verified at $h1--it should match the original tag. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.2/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | +-|----------------------------------------------------------------|-+ | +# | | + $swp1 BR $swp2 + | | +# | | APP=0,5,10 .. 7,5,17 APP=0,5,20 .. 7,5,27 | | +# | +--------------------------------------------------------------------+ | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_dscp +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +__dscp_capture_add_del() +{ + local add_del=$1; shift + local dev=$1; shift + local base=$1; shift + local dscp; + + for prio in {0..7}; do + dscp=$((base + prio)) + __icmp_capture_add_del $add_del $dscp "" $dev \ + "ip_tos $((dscp << 2))" + done +} + +dscp_capture_install() +{ + local dev=$1; shift + local base=$1; shift + + __dscp_capture_add_del add $dev $base +} + +dscp_capture_uninstall() +{ + local dev=$1; shift + local base=$1; shift + + __dscp_capture_add_del del $dev $base +} + +h1_create() +{ + local dscp; + + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 10 +} + +h1_destroy() +{ + dscp_capture_uninstall $h1 10 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 20 +} + +h2_destroy() +{ + dscp_capture_uninstall $h2 20 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/28 +} + +dscp_map() +{ + local base=$1; shift + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +lldpad_wait() +{ + local dev=$1; shift + + while lldptool -t -i $dev -V APP -c app | grep -q pending; do + echo "$dev: waiting for lldpad to push pending APP updates" + sleep 5 + done +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null + lldpad_wait $swp1 + lldpad_wait $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null + + # Give lldpad a chance to push down the changes. If the device is downed + # too soon, the updates will be left pending, but will have been struck + # off the lldpad's DB already, and we won't be able to tell. Then on + # next test iteration this would cause weirdness as newly-added APP + # rules conflict with the old ones, sometimes getting stuck in an + # "unknown" state. + sleep 5 + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + ip link del dev br1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +dscp_fetch_stats() +{ + local dev=$1; shift + local base=$1; shift + + for prio in {0..7}; do + local dscp=$((base + prio)) + local t=$(tc_rule_stats_get $dev $dscp) + echo "[$dscp]=$t " + done +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local dev_10=$1; shift + local dev_20=$1; shift + + local dscp_10=$(((prio + 10) << 2)) + local dscp_20=$(((prio + 20) << 2)) + + RET=0 + + local -A t0s + eval "t0s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + ip vrf exec $vrf_name \ + ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \ + -c 10 -i 0.1 -w 2 &> /dev/null + + local -A t1s + eval "t1s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + for key in ${!t0s[@]}; do + local expect + if ((key == dscp_10 || key == dscp_20)); then + expect=10 + else + expect=0 + fi + + local delta=$((t1s[key] - t0s[key])) + ((expect == delta)) + check_err $? "DSCP $key: Expected to capture $expect packets, got $delta." + done + + log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20" +} + +test_dscp() +{ + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2 + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |