diff options
Diffstat (limited to 'tools/testing/selftests/zram')
| -rwxr-xr-x | tools/testing/selftests/zram/zram.sh | 15 | ||||
| -rwxr-xr-x | tools/testing/selftests/zram/zram01.sh | 33 | ||||
| -rwxr-xr-x | tools/testing/selftests/zram/zram02.sh | 1 | ||||
| -rwxr-xr-x | tools/testing/selftests/zram/zram_lib.sh | 134 |
4 files changed, 98 insertions, 85 deletions
diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec454..b0b91d9b0dc2 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb87..8f4affe34f3e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,9 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs @@ -81,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c0..2418b0c4ed13 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd1..21ec1966de76 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,12 +5,17 @@ # Author: Alexey Kodanev <alexey.kodanev@oracle.com> # Modified: Naresh Kamboju <naresh.kamboju@linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,68 +30,104 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() { echo "set max_comp_streams to zram device(s)" - local i=0 + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -98,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -108,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -125,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -142,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -158,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -182,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -196,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -215,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ |