diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 108 |
1 files changed, 54 insertions, 54 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index c90d8e8b95cb..41503c241989 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2324,7 +2324,7 @@ laminar_endp_tests() { # no laminar endpoints: routing rules are used if reset_with_tcp_filter "without a laminar endpoint" ns1 10.0.2.2 REJECT && - mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then + continue_if mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -2336,7 +2336,7 @@ laminar_endp_tests() # laminar endpoints: this endpoint is used if reset_with_tcp_filter "with a laminar endpoint" ns1 10.0.2.2 REJECT && - mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then + continue_if mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -2348,7 +2348,7 @@ laminar_endp_tests() # laminar endpoints: these endpoints are used if reset_with_tcp_filter "with multiple laminar endpoints" ns1 10.0.2.2 REJECT && - mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then + continue_if mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -2363,7 +2363,7 @@ laminar_endp_tests() # laminar endpoints: only one endpoint is used if reset_with_tcp_filter "single laminar endpoint" ns1 10.0.2.2 REJECT && - mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then + continue_if mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -2376,7 +2376,7 @@ laminar_endp_tests() # laminar endpoints: subflow and laminar flags if reset_with_tcp_filter "sublow + laminar endpoints" ns1 10.0.2.2 REJECT && - mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then + continue_if mptcp_lib_kallsyms_has "mptcp_pm_get_endp_laminar_max$"; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 2 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -2532,7 +2532,7 @@ remove_tests() if reset "remove single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 @@ -2545,8 +2545,8 @@ remove_tests() if reset "remove multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns2=-2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 @@ -2557,7 +2557,7 @@ remove_tests() # single address, remove if reset "remove single address"; then pm_nl_set_limits $ns1 0 1 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 @@ -2570,9 +2570,9 @@ remove_tests() # subflow and signal, remove if reset "remove subflow and signal"; then pm_nl_set_limits $ns1 0 2 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 2 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 @@ -2584,10 +2584,10 @@ remove_tests() # subflows and signal, remove if reset "remove subflows and signal"; then pm_nl_set_limits $ns1 0 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 3 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2599,9 +2599,9 @@ remove_tests() # addresses remove if reset "remove addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 @@ -2614,10 +2614,10 @@ remove_tests() # invalid addresses remove if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup # broadcast IP: no packet for this address will be received on ns1 - pm_nl_add_endpoint $ns1 224.0.0.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 @@ -2631,10 +2631,10 @@ remove_tests() # subflows and signal, flush if reset "flush subflows and signal"; then pm_nl_set_limits $ns1 0 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 3 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2647,9 +2647,9 @@ remove_tests() if reset "flush subflows"; then pm_nl_set_limits $ns1 3 3 pm_nl_set_limits $ns2 3 3 - pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup id 150 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2666,9 +2666,9 @@ remove_tests() # addresses flush if reset "flush addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 @@ -2681,9 +2681,9 @@ remove_tests() # invalid addresses flush if reset "flush invalid addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.12.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 @@ -3806,7 +3806,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 2 2 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns1 @@ -3831,7 +3831,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm create destroy subflow @@ -3839,7 +3839,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3859,7 +3859,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm create id 0 subflow @@ -3867,7 +3867,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3880,7 +3880,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm remove initial subflow @@ -3888,7 +3888,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3904,7 +3904,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm send RM_ADDR for ID 0 @@ -3912,7 +3912,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 1 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns1 @@ -3930,7 +3930,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi } @@ -3939,11 +3939,11 @@ endpoint_tests() # subflow_rebuild_header is needed to support the implicit flag # userspace pm type prevents add_addr if reset "implicit EP" && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - { speed=slow \ + { test_linkfail=128 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -3960,17 +3960,17 @@ endpoint_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi if reset_with_tcp_filter "delete and re-add" ns2 10.0.3.2 REJECT OUTPUT && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then start_events pm_nl_set_limits $ns1 0 3 pm_nl_set_limits $ns2 0 3 pm_nl_add_endpoint $ns2 10.0.1.2 id 1 dev ns2eth1 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow - { test_linkfail=4 speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -4015,7 +4015,7 @@ endpoint_tests() chk_mptcp_info subflows 3 subflows 3 done - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid kill_events_pids chk_evt_nr ns1 MPTCP_LIB_EVENT_LISTENER_CREATED 1 @@ -4040,7 +4040,7 @@ endpoint_tests() # remove and re-add if reset_with_events "delete re-add signal" && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=0 pm_nl_set_limits $ns1 0 3 pm_nl_set_limits $ns2 3 3 @@ -4048,7 +4048,7 @@ endpoint_tests() # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal pm_nl_add_endpoint $ns1 10.0.1.1 id 42 flags signal - { test_linkfail=4 speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -4089,7 +4089,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "after re-re-add ID 0" 3 chk_mptcp_info subflows 3 subflows 3 - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid kill_events_pids chk_evt_nr ns1 MPTCP_LIB_EVENT_LISTENER_CREATED 1 @@ -4115,13 +4115,13 @@ endpoint_tests() # flush and re-add if reset_with_tcp_filter "flush re-add" ns2 10.0.3.2 REJECT OUTPUT && - mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 1 2 # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow - { test_linkfail=4 speed=20 \ + { test_linkfail=128 speed=20 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -4137,7 +4137,7 @@ endpoint_tests() wait_mpj $ns2 pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal wait_mpj $ns2 - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid join_syn_tx=3 join_connect_err=1 \ chk_join_nr 2 2 2 |