diff options
Diffstat (limited to 'tools/power/cpupower/bench')
-rw-r--r-- | tools/power/cpupower/bench/Makefile | 29 | ||||
-rw-r--r-- | tools/power/cpupower/bench/README-BENCH | 124 | ||||
-rw-r--r-- | tools/power/cpupower/bench/benchmark.c | 194 | ||||
-rw-r--r-- | tools/power/cpupower/bench/benchmark.h | 29 | ||||
-rw-r--r-- | tools/power/cpupower/bench/config.h | 36 | ||||
-rw-r--r-- | tools/power/cpupower/bench/cpufreq-bench_plot.sh | 104 | ||||
-rw-r--r-- | tools/power/cpupower/bench/cpufreq-bench_script.sh | 101 | ||||
-rw-r--r-- | tools/power/cpupower/bench/example.cfg | 11 | ||||
-rw-r--r-- | tools/power/cpupower/bench/main.c | 202 | ||||
-rw-r--r-- | tools/power/cpupower/bench/parse.c | 225 | ||||
-rw-r--r-- | tools/power/cpupower/bench/parse.h | 53 | ||||
-rw-r--r-- | tools/power/cpupower/bench/system.c | 191 | ||||
-rw-r--r-- | tools/power/cpupower/bench/system.h | 29 |
13 files changed, 1328 insertions, 0 deletions
diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile new file mode 100644 index 000000000000..2b67606fc3e3 --- /dev/null +++ b/tools/power/cpupower/bench/Makefile @@ -0,0 +1,29 @@ +LIBS = -L../ -lm -lcpupower + +OBJS = main.o parse.o system.o benchmark.o +CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\" + +%.o : %.c + $(ECHO) " CC " $@ + $(QUIET) $(CC) -c $(CFLAGS) $< -o $@ + +cpufreq-bench: $(OBJS) + $(ECHO) " CC " $@ + $(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS) + +all: cpufreq-bench + +install: + mkdir -p $(DESTDIR)/$(sbindir) + mkdir -p $(DESTDIR)/$(bindir) + mkdir -p $(DESTDIR)/$(docdir) + mkdir -p $(DESTDIR)/$(confdir) + install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench + install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh + install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH + install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh + install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf + +clean: + rm -f *.o + rm -f cpufreq-bench diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH new file mode 100644 index 000000000000..8093ec738170 --- /dev/null +++ b/tools/power/cpupower/bench/README-BENCH @@ -0,0 +1,124 @@ +This is cpufreq-bench, a microbenchmark for the cpufreq framework. + +Purpose +======= + +What is this benchmark for: + - Identify worst case performance loss when doing dynamic frequency + scaling using Linux kernel governors + - Identify average reaction time of a governor to CPU load changes + - (Stress) Testing whether a cpufreq low level driver or governor works + as expected + - Identify cpufreq related performance regressions between kernels + - Possibly Real time priority testing? -> what happens if there are + processes with a higher prio than the governor's kernel thread + - ... + +What this benchmark does *not* cover: + - Power saving related regressions (In fact as better the performance + throughput is, the worse the power savings will be, but the first should + mostly count more...) + - Real world (workloads) + + +Description +=========== + +cpufreq-bench helps to test the condition of a given cpufreq governor. +For that purpose, it compares the performance governor to a configured +powersave module. + + +How it works +============ +You can specify load (100% CPU load) and sleep (0% CPU load) times in us which +will be run X time in a row (cycles): + + sleep=25000 + load=25000 + cycles=20 + +This part of the configuration file will create 25ms load/sleep turns, +repeated 20 times. + +Adding this: + sleep_step=25000 + load_step=25000 + rounds=5 +Will increase load and sleep time by 25ms 5 times. +Together you get following test: +25ms load/sleep time repeated 20 times (cycles). +50ms load/sleep time repeated 20 times (cycles). +.. +100ms load/sleep time repeated 20 times (cycles). + +First it is calibrated how long a specific CPU intensive calculation +takes on this machine and needs to be run in a loop using the performance +governor. +Then the above test runs are processed using the performance governor +and the governor to test. The time the calculation really needed +with the dynamic freq scaling governor is compared with the time needed +on full performance and you get the overall performance loss. + + +Example of expected results with ondemand governor: + +This shows expected results of the first two test run rounds from +above config, you there have: + +100% CPU load (load) | 0 % CPU load (sleep) | round + 25 ms | 25 ms | 1 + 50 ms | 50 ms | 2 + +For example if ondemand governor is configured to have a 50ms +sampling rate you get: + +In round 1, ondemand should have rather static 50% load and probably +won't ever switch up (as long as up_threshold is above). + +In round 2, if the ondemand sampling times exactly match the load/sleep +trigger of the cpufreq-bench, you will see no performance loss (compare with +below possible ondemand sample kick ins (1)): + +But if ondemand always kicks in in the middle of the load sleep cycles, it +will always see 50% loads and you get worst performance impact never +switching up (compare with below possible ondemand sample kick ins (2)):: + + 50 50 50 50ms ->time +load -----| |-----| |-----| |-----| + | | | | | | | +sleep |-----| |-----| |-----| |---- + |-----|-----|-----|-----|-----|-----|-----|---- ondemand sampling (1) + 100 0 100 0 100 0 100 load seen by ondemand(%) + |-----|-----|-----|-----|-----|-----|-----|-- ondemand sampling (2) + 50 50 50 50 50 50 50 load seen by ondemand(%) + +You can easily test all kind of load/sleep times and check whether your +governor in average behaves as expected. + + +ToDo +==== + +Provide a gnuplot utility script for easy generation of plots to present +the outcome nicely. + + +cpufreq-bench Command Usage +=========================== +-l, --load=<long int> initial load time in us +-s, --sleep=<long int> initial sleep time in us +-x, --load-step=<long int> time to be added to load time, in us +-y, --sleep-step=<long int> time to be added to sleep time, in us +-c, --cpu=<unsigned int> CPU Number to use, starting at 0 +-p, --prio=<priority> scheduler priority, HIGH, LOW or DEFAULT +-g, --governor=<governor> cpufreq governor to test +-n, --cycles=<int> load/sleep cycles to get an avarage value to compare +-r, --rounds<int> load/sleep rounds +-f, --file=<configfile> config file to use +-o, --output=<dir> output dir, must exist +-v, --verbose verbose output on/off + +Due to the high priority, the application may not be responsible for some time. +After the benchmark, the logfile is saved in OUTPUTDIR/benchmark_TIMESTAMP.log + diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c new file mode 100644 index 000000000000..81b1c48607d9 --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.c @@ -0,0 +1,194 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <unistd.h> +#include <math.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +/* Print out progress if we log into a file */ +#define show_progress(total_time, progress_time) \ +if (config->output != stdout) { \ + fprintf(stdout, "Progress: %02lu %%\r", \ + (progress_time * 100) / total_time); \ + fflush(stdout); \ +} + +/** + * compute how many rounds of calculation we should do + * to get the given load time + * + * @param load aimed load time in µs + * + * @retval rounds of calculation + **/ + +unsigned int calculate_timespace(long load, struct config *config) +{ + int i; + long long now, then; + unsigned int estimated = GAUGECOUNT; + unsigned int rounds = 0; + unsigned int timed = 0; + + if (config->verbose) + printf("calibrating load of %lius, please wait...\n", load); + + /* get the initial calculation time for a specific number of rounds */ + now = get_time(); + ROUNDS(estimated); + then = get_time(); + + timed = (unsigned int)(then - now); + + /* approximation of the wanted load time by comparing with the + * initial calculation time */ + for (i = 0; i < 4; i++) { + rounds = (unsigned int)(load * estimated / timed); + dprintf("calibrating with %u rounds\n", rounds); + now = get_time(); + ROUNDS(rounds); + then = get_time(); + + timed = (unsigned int)(then - now); + estimated = rounds; + } + if (config->verbose) + printf("calibration done\n"); + + return estimated; +} + +/** + * benchmark + * generates a specific sleep an load time with the performance + * governor and compares the used time for same calculations done + * with the configured powersave governor + * + * @param config config values for the benchmark + * + **/ + +void start_benchmark(struct config *config) +{ + unsigned int _round, cycle; + long long now, then; + long sleep_time = 0, load_time = 0; + long performance_time = 0, powersave_time = 0; + unsigned int calculations; + unsigned long total_time = 0, progress_time = 0; + + sleep_time = config->sleep; + load_time = config->load; + + /* For the progress bar */ + for (_round = 1; _round <= config->rounds; _round++) + total_time += _round * (config->sleep + config->load); + total_time *= 2; /* powersave and performance cycles */ + + for (_round = 0; _round < config->rounds; _round++) { + performance_time = 0LL; + powersave_time = 0LL; + + show_progress(total_time, progress_time); + + /* set the cpufreq governor to "performance" which disables + * P-State switching. */ + if (set_cpufreq_governor("performance", config->cpu) != 0) + return; + + /* calibrate the calculation time. the resulting calculation + * _rounds should produce a load which matches the configured + * load time */ + calculations = calculate_timespace(load_time, config); + + if (config->verbose) + printf("_round %i: doing %u cycles with %u calculations" + " for %lius\n", _round + 1, config->cycles, + calculations, load_time); + + fprintf(config->output, "%u %li %li ", + _round, load_time, sleep_time); + + if (config->verbose) + printf("avarage: %lius, rps:%li\n", + load_time / calculations, + 1000000 * calculations / load_time); + + /* do some sleep/load cycles with the performance governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + performance_time += then - now - sleep_time; + if (config->verbose) + printf("performance cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + fprintf(config->output, "%li ", + performance_time / config->cycles); + + progress_time += sleep_time + load_time; + show_progress(total_time, progress_time); + + /* set the powersave governor which activates P-State switching + * again */ + if (set_cpufreq_governor(config->governor, config->cpu) != 0) + return; + + /* again, do some sleep/load cycles with the + * powersave governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + powersave_time += then - now - sleep_time; + if (config->verbose) + printf("powersave cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + + progress_time += sleep_time + load_time; + + /* compare the avarage sleep/load cycles */ + fprintf(config->output, "%li ", + powersave_time / config->cycles); + fprintf(config->output, "%.3f\n", + performance_time * 100.0 / powersave_time); + fflush(config->output); + + if (config->verbose) + printf("performance is at %.2f%%\n", + performance_time * 100.0 / powersave_time); + + sleep_time += config->sleep_step; + load_time += config->load_step; + } +} diff --git a/tools/power/cpupower/bench/benchmark.h b/tools/power/cpupower/bench/benchmark.h new file mode 100644 index 000000000000..51d7f50ac2bb --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.h @@ -0,0 +1,29 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* load loop, this schould take about 1 to 2ms to complete */ +#define ROUNDS(x) {unsigned int rcnt; \ + for (rcnt = 0; rcnt < x*1000; rcnt++) { \ + (void)(((int)(pow(rcnt, rcnt) * \ + sqrt(rcnt*7230970)) ^ 7230716) ^ \ + (int)atan2(rcnt, rcnt)); \ + } } \ + + +void start_benchmark(struct config *config); diff --git a/tools/power/cpupower/bench/config.h b/tools/power/cpupower/bench/config.h new file mode 100644 index 000000000000..ee6f258e5336 --- /dev/null +++ b/tools/power/cpupower/bench/config.h @@ -0,0 +1,36 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* initial loop count for the load calibration */ +#define GAUGECOUNT 1500 + +/* default scheduling policy SCHED_OTHER */ +#define SCHEDULER SCHED_OTHER + +#define PRIORITY_DEFAULT 0 +#define PRIORITY_HIGH sched_get_priority_max(SCHEDULER) +#define PRIORITY_LOW sched_get_priority_min(SCHEDULER) + +/* enable further debug messages */ +#ifdef DEBUG +#define dprintf printf +#else +#define dprintf(...) do { } while (0) +#endif + diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh new file mode 100644 index 000000000000..410021a12f40 --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh @@ -0,0 +1,104 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Helper script to easily create nice plots of your cpufreq-bench results + +dir=`mktemp -d` +output_file="cpufreq-bench.png" +global_title="cpufreq-bench plot" +picture_type="jpeg" +file[0]="" + +function usage() +{ + echo "cpufreq-bench_plot.sh [OPTIONS] logfile [measure_title] [logfile [measure_title]] ...]" + echo + echo "Options" + echo " -o output_file" + echo " -t global_title" + echo " -p picture_type [jpeg|gif|png|postscript|...]" + exit 1 +} + +if [ $# -eq 0 ];then + echo "No benchmark results file provided" + echo + usage +fi + +while getopts o:t:p: name ; do + case $name in + o) + output_file="$OPTARG".$picture_type + ;; + t) + global_title="$OPTARG" + ;; + p) + picture_type="$OPTARG" + ;; + ?) + usage + ;; + esac +done +shift $(($OPTIND -1)) + +plots=0 +while [ "$1" ];do + if [ ! -f "$1" ];then + echo "File $1 does not exist" + usage + fi + file[$plots]="$1" + title[$plots]="$2" + # echo "File: ${file[$plots]} - ${title[plots]}" + shift;shift + plots=$((plots + 1)) +done + +echo "set terminal $picture_type" >> $dir/plot_script.gpl +echo "set output \"$output_file\"" >> $dir/plot_script.gpl +echo "set title \"$global_title\"" >> $dir/plot_script.gpl +echo "set xlabel \"sleep/load time\"" >> $dir/plot_script.gpl +echo "set ylabel \"Performance (%)\"" >> $dir/plot_script.gpl + +for((plot=0;plot<$plots;plot++));do + + # Sanity check + ###### I am to dump to get this redirected to stderr/stdout in one awk call... ##### + cat ${file[$plot]} |grep -v "^#" |awk '{if ($2 != $3) printf("Error in measure %d:Load time %s does not equal sleep time %s, plot will not be correct\n", $1, $2, $3); ERR=1}' + ###### I am to dump to get this redirected in one awk call... ##### + + # Parse out load time (which must be equal to sleep time for a plot), divide it by 1000 + # to get ms and parse out the performance in percentage and write it to a temp file for plotting + cat ${file[$plot]} |grep -v "^#" |awk '{printf "%lu %.1f\n",$2/1000, $6}' >$dir/data_$plot + + if [ $plot -eq 0 ];then + echo -n "plot " >> $dir/plot_script.gpl + fi + echo -n "\"$dir/data_$plot\" title \"${title[$plot]}\" with lines" >> $dir/plot_script.gpl + if [ $(($plot + 1)) -ne $plots ];then + echo -n ", " >> $dir/plot_script.gpl + fi +done +echo >> $dir/plot_script.gpl + +gnuplot $dir/plot_script.gpl +rm -r $dir
\ No newline at end of file diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh new file mode 100644 index 000000000000..de20d2a06879 --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh @@ -0,0 +1,101 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Ondemand up_threshold and sampling rate test script for cpufreq-bench +# mircobenchmark. +# Modify the general variables at the top or extend or copy out parts +# if you want to test other things +# + +# Default with latest kernels is 95, before micro account patches +# it was 80, cmp. with git commit 808009131046b62ac434dbc796 +UP_THRESHOLD="60 80 95" +# Depending on the kernel and the HW sampling rate could be restricted +# and cannot be set that low... +# E.g. before git commit cef9615a853ebc4972084f7 one could only set +# min sampling rate of 80000 if CONFIG_HZ=250 +SAMPLING_RATE="20000 80000" + +function measure() +{ + local -i up_threshold_set + local -i sampling_rate_set + + for up_threshold in $UP_THRESHOLD;do + for sampling_rate in $SAMPLING_RATE;do + # Set values in sysfs + echo $up_threshold >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold + echo $sampling_rate >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate + up_threshold_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold) + sampling_rate_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate) + + # Verify set values in sysfs + if [ ${up_threshold_set} -eq ${up_threshold} ];then + echo "up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + else + echo "WARNING: Tried to set up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + fi + if [ ${sampling_rate_set} -eq ${sampling_rate} ];then + echo "sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + else + echo "WARNING: Tried to set sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + fi + + # Benchmark + cpufreq-bench -o /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate} + done + done +} + +function create_plots() +{ + local command + + for up_threshold in $UP_THRESHOLD;do + command="cpufreq-bench_plot.sh -o \"sampling_rate_${SAMPLING_RATE}_up_threshold_${up_threshold}\" -t \"Ondemand sampling_rate: ${SAMPLING_RATE} comparison - Up_threshold: $up_threshold %\"" + for sampling_rate in $SAMPLING_RATE;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"sampling_rate = $sampling_rate\"" + done + echo $command + eval "$command" + echo + done + + for sampling_rate in $SAMPLING_RATE;do + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${sampling_rate}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} % comparison - sampling_rate: $sampling_rate\"" + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold\"" + done + echo $command + eval "$command" + echo + done + + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${SAMPLING_RATE}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} and sampling_rate ${SAMPLING_RATE} comparison\"" + for sampling_rate in $SAMPLING_RATE;do + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold - sampling_rate = $sampling_rate\"" + done + done + echo "$command" + eval "$command" +} + +measure +create_plots
\ No newline at end of file diff --git a/tools/power/cpupower/bench/example.cfg b/tools/power/cpupower/bench/example.cfg new file mode 100644 index 000000000000..f91f64360688 --- /dev/null +++ b/tools/power/cpupower/bench/example.cfg @@ -0,0 +1,11 @@ +sleep = 50000 +load = 50000 +cpu = 0 +priority = LOW +output = /var/log/cpufreq-bench +sleep_step = 50000 +load_step = 50000 +cycles = 20 +rounds = 40 +verbose = 0 +governor = ondemand diff --git a/tools/power/cpupower/bench/main.c b/tools/power/cpupower/bench/main.c new file mode 100644 index 000000000000..24910313a521 --- /dev/null +++ b/tools/power/cpupower/bench/main.c @@ -0,0 +1,202 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <getopt.h> +#include <errno.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +static struct option long_options[] = { + {"output", 1, 0, 'o'}, + {"sleep", 1, 0, 's'}, + {"load", 1, 0, 'l'}, + {"verbose", 0, 0, 'v'}, + {"cpu", 1, 0, 'c'}, + {"governor", 1, 0, 'g'}, + {"prio", 1, 0, 'p'}, + {"file", 1, 0, 'f'}, + {"cycles", 1, 0, 'n'}, + {"rounds", 1, 0, 'r'}, + {"load-step", 1, 0, 'x'}, + {"sleep-step", 1, 0, 'y'}, + {"help", 0, 0, 'h'}, + {0, 0, 0, 0} +}; + +/******************************************************************* + usage +*******************************************************************/ + +void usage() +{ + printf("usage: ./bench\n"); + printf("Options:\n"); + printf(" -l, --load=<long int>\t\tinitial load time in us\n"); + printf(" -s, --sleep=<long int>\t\tinitial sleep time in us\n"); + printf(" -x, --load-step=<long int>\ttime to be added to load time, in us\n"); + printf(" -y, --sleep-step=<long int>\ttime to be added to sleep time, in us\n"); + printf(" -c, --cpu=<cpu #>\t\t\tCPU Nr. to use, starting at 0\n"); + printf(" -p, --prio=<priority>\t\t\tscheduler priority, HIGH, LOW or DEFAULT\n"); + printf(" -g, --governor=<governor>\t\tcpufreq governor to test\n"); + printf(" -n, --cycles=<int>\t\t\tload/sleep cycles\n"); + printf(" -r, --rounds<int>\t\t\tload/sleep rounds\n"); + printf(" -f, --file=<configfile>\t\tconfig file to use\n"); + printf(" -o, --output=<dir>\t\t\toutput path. Filename will be OUTPUTPATH/benchmark_TIMESTAMP.log\n"); + printf(" -v, --verbose\t\t\t\tverbose output on/off\n"); + printf(" -h, --help\t\t\t\tPrint this help screen\n"); + exit(1); +} + +/******************************************************************* + main +*******************************************************************/ + +int main(int argc, char **argv) +{ + int c; + int option_index = 0; + struct config *config = NULL; + + config = prepare_default_config(); + + if (config == NULL) + return EXIT_FAILURE; + + while (1) { + c = getopt_long (argc, argv, "hg:o:s:l:vc:p:f:n:r:x:y:", + long_options, &option_index); + if (c == -1) + break; + + switch (c) { + case 'o': + if (config->output != NULL) + fclose(config->output); + + config->output = prepare_output(optarg); + + if (config->output == NULL) + return EXIT_FAILURE; + + dprintf("user output path -> %s\n", optarg); + break; + case 's': + sscanf(optarg, "%li", &config->sleep); + dprintf("user sleep time -> %s\n", optarg); + break; + case 'l': + sscanf(optarg, "%li", &config->load); + dprintf("user load time -> %s\n", optarg); + break; + case 'c': + sscanf(optarg, "%u", &config->cpu); + dprintf("user cpu -> %s\n", optarg); + break; + case 'g': + strncpy(config->governor, optarg, 14); + dprintf("user governor -> %s\n", optarg); + break; + case 'p': + if (string_to_prio(optarg) != SCHED_ERR) { + config->prio = string_to_prio(optarg); + dprintf("user prio -> %s\n", optarg); + } else { + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + break; + case 'n': + sscanf(optarg, "%u", &config->cycles); + dprintf("user cycles -> %s\n", optarg); + break; + case 'r': + sscanf(optarg, "%u", &config->rounds); + dprintf("user rounds -> %s\n", optarg); + break; + case 'x': + sscanf(optarg, "%li", &config->load_step); + dprintf("user load_step -> %s\n", optarg); + break; + case 'y': + sscanf(optarg, "%li", &config->sleep_step); + dprintf("user sleep_step -> %s\n", optarg); + break; + case 'f': + if (prepare_config(optarg, config)) + return EXIT_FAILURE; + break; + case 'v': + config->verbose = 1; + dprintf("verbose output enabled\n"); + break; + case 'h': + case '?': + default: + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + } + + if (config->verbose) { + printf("starting benchmark with parameters:\n"); + printf("config:\n\t" + "sleep=%li\n\t" + "load=%li\n\t" + "sleep_step=%li\n\t" + "load_step=%li\n\t" + "cpu=%u\n\t" + "cycles=%u\n\t" + "rounds=%u\n\t" + "governor=%s\n\n", + config->sleep, + config->load, + config->sleep_step, + config->load_step, + config->cpu, + config->cycles, + config->rounds, + config->governor); + } + + prepare_user(config); + prepare_system(config); + start_benchmark(config); + + if (config->output != stdout) + fclose(config->output); + + free(config); + + return EXIT_SUCCESS; +} + diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c new file mode 100644 index 000000000000..543bba14ae2c --- /dev/null +++ b/tools/power/cpupower/bench/parse.c @@ -0,0 +1,225 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <time.h> +#include <dirent.h> + +#include <sys/utsname.h> +#include <sys/types.h> +#include <sys/stat.h> + +#include "parse.h" +#include "config.h" + +/** + * converts priority string to priority + * + * @param str string that represents a scheduler priority + * + * @retval priority + * @retval SCHED_ERR when the priority doesn't exit + **/ + +enum sched_prio string_to_prio(const char *str) +{ + if (strncasecmp("high", str, strlen(str)) == 0) + return SCHED_HIGH; + else if (strncasecmp("default", str, strlen(str)) == 0) + return SCHED_DEFAULT; + else if (strncasecmp("low", str, strlen(str)) == 0) + return SCHED_LOW; + else + return SCHED_ERR; +} + +/** + * create and open logfile + * + * @param dir directory in which the logfile should be created + * + * @retval logfile on success + * @retval NULL when the file can't be created + **/ + +FILE *prepare_output(const char *dirname) +{ + FILE *output = NULL; + int len; + char *filename; + struct utsname sysdata; + DIR *dir; + + dir = opendir(dirname); + if (dir == NULL) { + if (mkdir(dirname, 0755)) { + perror("mkdir"); + fprintf(stderr, "error: Cannot create dir %s\n", + dirname); + return NULL; + } + } + + len = strlen(dirname) + 30; + filename = malloc(sizeof(char) * len); + + if (uname(&sysdata) == 0) { + len += strlen(sysdata.nodename) + strlen(sysdata.release); + filename = realloc(filename, sizeof(char) * len); + + if (filename == NULL) { + perror("realloc"); + return NULL; + } + + snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log", + dirname, sysdata.nodename, sysdata.release, time(NULL)); + } else { + snprintf(filename, len - 1, "%s/benchmark_%li.log", + dirname, time(NULL)); + } + + dprintf("logilename: %s\n", filename); + + output = fopen(filename, "w+"); + if (output == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to open logfile\n"); + } + + fprintf(stdout, "Logfile: %s\n", filename); + + free(filename); + fprintf(output, "#round load sleep performance powersave percentage\n"); + return output; +} + +/** + * returns the default config + * + * @retval default config on success + * @retval NULL when the output file can't be created + **/ + +struct config *prepare_default_config() +{ + struct config *config = malloc(sizeof(struct config)); + + dprintf("loading defaults\n"); + + config->sleep = 500000; + config->load = 500000; + config->sleep_step = 500000; + config->load_step = 500000; + config->cycles = 5; + config->rounds = 50; + config->cpu = 0; + config->prio = SCHED_HIGH; + config->verbose = 0; + strncpy(config->governor, "ondemand", 8); + + config->output = stdout; + +#ifdef DEFAULT_CONFIG_FILE + if (prepare_config(DEFAULT_CONFIG_FILE, config)) + return NULL; +#endif + return config; +} + +/** + * parses config file and returns the config to the caller + * + * @param path config file name + * + * @retval 1 on error + * @retval 0 on success + **/ + +int prepare_config(const char *path, struct config *config) +{ + size_t len = 0; + char *opt, *val, *line = NULL; + FILE *configfile = fopen(path, "r"); + + if (config == NULL) { + fprintf(stderr, "error: config is NULL\n"); + return 1; + } + + if (configfile == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to read configfile\n"); + free(config); + return 1; + } + + while (getline(&line, &len, configfile) != -1) { + if (line[0] == '#' || line[0] == ' ') + continue; + + sscanf(line, "%as = %as", &opt, &val); + + dprintf("parsing: %s -> %s\n", opt, val); + + if (strncmp("sleep", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->sleep); + + else if (strncmp("load", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->load); + + else if (strncmp("load_step", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->load_step); + + else if (strncmp("sleep_step", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->sleep_step); + + else if (strncmp("cycles", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->cycles); + + else if (strncmp("rounds", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->rounds); + + else if (strncmp("verbose", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->verbose); + + else if (strncmp("output", opt, strlen(opt)) == 0) + config->output = prepare_output(val); + + else if (strncmp("cpu", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->cpu); + + else if (strncmp("governor", opt, 14) == 0) + strncpy(config->governor, val, 14); + + else if (strncmp("priority", opt, strlen(opt)) == 0) { + if (string_to_prio(val) != SCHED_ERR) + config->prio = string_to_prio(val); + } + } + + free(line); + free(opt); + free(val); + + return 0; +} diff --git a/tools/power/cpupower/bench/parse.h b/tools/power/cpupower/bench/parse.h new file mode 100644 index 000000000000..a8dc632d9eee --- /dev/null +++ b/tools/power/cpupower/bench/parse.h @@ -0,0 +1,53 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* struct that holds the required config parameters */ +struct config +{ + long sleep; /* sleep time in µs */ + long load; /* load time in µs */ + long sleep_step; /* time value which changes the + * sleep time after every round in µs */ + long load_step; /* time value which changes the + * load time after every round in µs */ + unsigned int cycles; /* calculation cycles with the same sleep/load time */ + unsigned int rounds; /* calculation rounds with iterated sleep/load time */ + unsigned int cpu; /* cpu for which the affinity is set */ + char governor[15]; /* cpufreq governor */ + enum sched_prio /* possible scheduler priorities */ + { + SCHED_ERR = -1, + SCHED_HIGH, + SCHED_DEFAULT, + SCHED_LOW + } prio; + + unsigned int verbose; /* verbose output */ + FILE *output; /* logfile */ + char *output_filename; /* logfile name, must be freed at the end + if output != NULL and output != stdout*/ +}; + +enum sched_prio string_to_prio(const char *str); + +FILE *prepare_output(const char *dir); + +int prepare_config(const char *path, struct config *config); +struct config *prepare_default_config(); + diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c new file mode 100644 index 000000000000..f01e3f4be84c --- /dev/null +++ b/tools/power/cpupower/bench/system.c @@ -0,0 +1,191 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <time.h> +#include <sys/time.h> +#include <sys/types.h> +#include <unistd.h> + +#include <sched.h> + +#include <cpufreq.h> + +#include "config.h" +#include "system.h" + +/** + * returns time since epoch in µs + * + * @retval time + **/ + +long long int get_time() +{ + struct timeval now; + + gettimeofday(&now, NULL); + + return (long long int)(now.tv_sec * 1000000LL + now.tv_usec); +} + +/** + * sets the cpufreq governor + * + * @param governor cpufreq governor name + * @param cpu cpu for which the governor should be set + * + * @retval 0 on success + * @retval -1 when failed + **/ + +int set_cpufreq_governor(char *governor, unsigned int cpu) +{ + + dprintf("set %s as cpufreq governor\n", governor); + + if (cpufreq_cpu_exists(cpu) != 0) { + perror("cpufreq_cpu_exists"); + fprintf(stderr, "error: cpu %u does not exist\n", cpu); + return -1; + } + + if (cpufreq_modify_policy_governor(cpu, governor) != 0) { + perror("cpufreq_modify_policy_governor"); + fprintf(stderr, "error: unable to set %s governor\n", governor); + return -1; + } + + return 0; +} + +/** + * sets cpu affinity for the process + * + * @param cpu cpu# to which the affinity should be set + * + * @retval 0 on success + * @retval -1 when setting the affinity failed + **/ + +int set_cpu_affinity(unsigned int cpu) +{ + cpu_set_t cpuset; + + CPU_ZERO(&cpuset); + CPU_SET(cpu, &cpuset); + + dprintf("set affinity to cpu #%u\n", cpu); + + if (sched_setaffinity(getpid(), sizeof(cpu_set_t), &cpuset) < 0) { + perror("sched_setaffinity"); + fprintf(stderr, "warning: unable to set cpu affinity\n"); + return -1; + } + + return 0; +} + +/** + * sets the process priority parameter + * + * @param priority priority value + * + * @retval 0 on success + * @retval -1 when setting the priority failed + **/ + +int set_process_priority(int priority) +{ + struct sched_param param; + + dprintf("set scheduler priority to %i\n", priority); + + param.sched_priority = priority; + + if (sched_setscheduler(0, SCHEDULER, ¶m) < 0) { + perror("sched_setscheduler"); + fprintf(stderr, "warning: unable to set scheduler priority\n"); + return -1; + } + + return 0; +} + +/** + * notifies the user that the benchmark may run some time + * + * @param config benchmark config values + * + **/ + +void prepare_user(const struct config *config) +{ + unsigned long sleep_time = 0; + unsigned long load_time = 0; + unsigned int round; + + for (round = 0; round < config->rounds; round++) { + sleep_time += 2 * config->cycles * + (config->sleep + config->sleep_step * round); + load_time += 2 * config->cycles * + (config->load + config->load_step * round) + + (config->load + config->load_step * round * 4); + } + + if (config->verbose || config->output != stdout) + printf("approx. test duration: %im\n", + (int)((sleep_time + load_time) / 60000000)); +} + +/** + * sets up the cpu affinity and scheduler priority + * + * @param config benchmark config values + * + **/ + +void prepare_system(const struct config *config) +{ + if (config->verbose) + printf("set cpu affinity to cpu #%u\n", config->cpu); + + set_cpu_affinity(config->cpu); + + switch (config->prio) { + case SCHED_HIGH: + if (config->verbose) + printf("high priority condition requested\n"); + + set_process_priority(PRIORITY_HIGH); + break; + case SCHED_LOW: + if (config->verbose) + printf("low priority condition requested\n"); + + set_process_priority(PRIORITY_LOW); + break; + default: + if (config->verbose) + printf("default priority condition requested\n"); + + set_process_priority(PRIORITY_DEFAULT); + } +} + diff --git a/tools/power/cpupower/bench/system.h b/tools/power/cpupower/bench/system.h new file mode 100644 index 000000000000..3a8c858b78f0 --- /dev/null +++ b/tools/power/cpupower/bench/system.h @@ -0,0 +1,29 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "parse.h" + +long long get_time(); + +int set_cpufreq_governor(char *governor, unsigned int cpu); +int set_cpu_affinity(unsigned int cpu); +int set_process_priority(int priority); + +void prepare_user(const struct config *config); +void prepare_system(const struct config *config); |