diff options
Diffstat (limited to 'tools/perf/Documentation')
| -rw-r--r-- | tools/perf/Documentation/perf-config.txt | 357 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-inject.txt | 7 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-record.txt | 6 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-report.txt | 40 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-stat.txt | 35 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-top.txt | 3 | ||||
| -rw-r--r-- | tools/perf/Documentation/perfconfig.example | 2 | ||||
| -rw-r--r-- | tools/perf/Documentation/tips.txt | 1 |
8 files changed, 431 insertions, 20 deletions
diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt index b9ca1e304158..15949e2a7805 100644 --- a/tools/perf/Documentation/perf-config.txt +++ b/tools/perf/Documentation/perf-config.txt @@ -8,7 +8,7 @@ perf-config - Get and set variables in a configuration file. SYNOPSIS -------- [verse] -'perf config' -l | --list +'perf config' [<file-option>] -l | --list DESCRIPTION ----------- @@ -21,6 +21,14 @@ OPTIONS --list:: Show current config variables, name and value, for all sections. +--user:: + For writing and reading options: write to user + '$HOME/.perfconfig' file or read it. + +--system:: + For writing and reading options: write to system-wide + '$(sysconfdir)/perfconfig' or read it. + CONFIGURATION FILE ------------------ @@ -30,6 +38,10 @@ The '$HOME/.perfconfig' file is used to store a per-user configuration. The file '$(sysconfdir)/perfconfig' can be used to store a system-wide default configuration. +When reading or writing, the values are read from the system and user +configuration files by default, and options '--system' and '--user' +can be used to tell the command to read from or write to only that location. + Syntax ~~~~~~ @@ -62,7 +74,7 @@ Given a $HOME/.perfconfig like this: medium = green, default normal = lightgray, default selected = white, lightgray - code = blue, default + jump_arrows = blue, default addr = magenta, default root = white, blue @@ -98,6 +110,347 @@ Given a $HOME/.perfconfig like this: order = caller sort-key = function +Variables +~~~~~~~~~ + +colors.*:: + The variables for customizing the colors used in the output for the + 'report', 'top' and 'annotate' in the TUI. They should specify the + foreground and background colors, separated by a comma, for example: + + medium = green, lightgray + + If you want to use the color configured for you terminal, just leave it + as 'default', for example: + + medium = default, lightgray + + Available colors: + red, yellow, green, cyan, gray, black, blue, + white, default, magenta, lightgray + + colors.top:: + 'top' means a overhead percentage which is more than 5%. + And values of this variable specify percentage colors. + Basic key values are foreground-color 'red' and + background-color 'default'. + colors.medium:: + 'medium' means a overhead percentage which has more than 0.5%. + Default values are 'green' and 'default'. + colors.normal:: + 'normal' means the rest of overhead percentages + except 'top', 'medium', 'selected'. + Default values are 'lightgray' and 'default'. + colors.selected:: + This selects the colors for the current entry in a list of entries + from sub-commands (top, report, annotate). + Default values are 'black' and 'lightgray'. + colors.jump_arrows:: + Colors for jump arrows on assembly code listings + such as 'jns', 'jmp', 'jane', etc. + Default values are 'blue', 'default'. + colors.addr:: + This selects colors for addresses from 'annotate'. + Default values are 'magenta', 'default'. + colors.root:: + Colors for headers in the output of a sub-commands (top, report). + Default values are 'white', 'blue'. + +tui.*, gtk.*:: + Subcommands that can be configured here are 'top', 'report' and 'annotate'. + These values are booleans, for example: + + [tui] + top = true + + will make the TUI be the default for the 'top' subcommand. Those will be + available if the required libs were detected at tool build time. + +buildid.*:: + buildid.dir:: + Each executable and shared library in modern distributions comes with a + content based identifier that, if available, will be inserted in a + 'perf.data' file header to, at analysis time find what is needed to do + symbol resolution, code annotation, etc. + + The recording tools also stores a hard link or copy in a per-user + directory, $HOME/.debug/, of binaries, shared libraries, /proc/kallsyms + and /proc/kcore files to be used at analysis time. + + The buildid.dir variable can be used to either change this directory + cache location, or to disable it altogether. If you want to disable it, + set buildid.dir to /dev/null. The default is $HOME/.debug + +annotate.*:: + These options work only for TUI. + These are in control of addresses, jump function, source code + in lines of assembly code from a specific program. + + annotate.hide_src_code:: + If a program which is analyzed has source code, + this option lets 'annotate' print a list of assembly code with the source code. + For example, let's see a part of a program. There're four lines. + If this option is 'true', they can be printed + without source code from a program as below. + + │ push %rbp + │ mov %rsp,%rbp + │ sub $0x10,%rsp + │ mov (%rdi),%rdx + + But if this option is 'false', source code of the part + can be also printed as below. Default is 'false'. + + │ struct rb_node *rb_next(const struct rb_node *node) + │ { + │ push %rbp + │ mov %rsp,%rbp + │ sub $0x10,%rsp + │ struct rb_node *parent; + │ + │ if (RB_EMPTY_NODE(node)) + │ mov (%rdi),%rdx + │ return n; + + annotate.use_offset:: + Basing on a first address of a loaded function, offset can be used. + Instead of using original addresses of assembly code, + addresses subtracted from a base address can be printed. + Let's illustrate an example. + If a base address is 0XFFFFFFFF81624d50 as below, + + ffffffff81624d50 <load0> + + an address on assembly code has a specific absolute address as below + + ffffffff816250b8:│ mov 0x8(%r14),%rdi + + but if use_offset is 'true', an address subtracted from a base address is printed. + Default is true. This option is only applied to TUI. + + 368:│ mov 0x8(%r14),%rdi + + annotate.jump_arrows:: + There can be jump instruction among assembly code. + Depending on a boolean value of jump_arrows, + arrows can be printed or not which represent + where do the instruction jump into as below. + + │ ┌──jmp 1333 + │ │ xchg %ax,%ax + │1330:│ mov %r15,%r10 + │1333:└─→cmp %r15,%r14 + + If jump_arrow is 'false', the arrows isn't printed as below. + Default is 'false'. + + │ ↓ jmp 1333 + │ xchg %ax,%ax + │1330: mov %r15,%r10 + │1333: cmp %r15,%r14 + + annotate.show_linenr:: + When showing source code if this option is 'true', + line numbers are printed as below. + + │1628 if (type & PERF_SAMPLE_IDENTIFIER) { + │ ↓ jne 508 + │1628 data->id = *array; + │1629 array++; + │1630 } + + However if this option is 'false', they aren't printed as below. + Default is 'false'. + + │ if (type & PERF_SAMPLE_IDENTIFIER) { + │ ↓ jne 508 + │ data->id = *array; + │ array++; + │ } + + annotate.show_nr_jumps:: + Let's see a part of assembly code. + + │1382: movb $0x1,-0x270(%rbp) + + If use this, the number of branches jumping to that address can be printed as below. + Default is 'false'. + + │1 1382: movb $0x1,-0x270(%rbp) + + annotate.show_total_period:: + To compare two records on an instruction base, with this option + provided, display total number of samples that belong to a line + in assembly code. If this option is 'true', total periods are printed + instead of percent values as below. + + 302 │ mov %eax,%eax + + But if this option is 'false', percent values for overhead are printed i.e. + Default is 'false'. + + 99.93 │ mov %eax,%eax + +hist.*:: + hist.percentage:: + This option control the way to calculate overhead of filtered entries - + that means the value of this option is effective only if there's a + filter (by comm, dso or symbol name). Suppose a following example: + + Overhead Symbols + ........ ....... + 33.33% foo + 33.33% bar + 33.33% baz + + This is an original overhead and we'll filter out the first 'foo' + entry. The value of 'relative' would increase the overhead of 'bar' + and 'baz' to 50.00% for each, while 'absolute' would show their + current overhead (33.33%). + +ui.*:: + ui.show-headers:: + This option controls display of column headers (like 'Overhead' and 'Symbol') + in 'report' and 'top'. If this option is false, they are hidden. + This option is only applied to TUI. + +call-graph.*:: + When sub-commands 'top' and 'report' work with -g/—-children + there're options in control of call-graph. + + call-graph.record-mode:: + The record-mode can be 'fp' (frame pointer), 'dwarf' and 'lbr'. + The value of 'dwarf' is effective only if perf detect needed library + (libunwind or a recent version of libdw). + 'lbr' only work for cpus that support it. + + call-graph.dump-size:: + The size of stack to dump in order to do post-unwinding. Default is 8192 (byte). + When using dwarf into record-mode, the default size will be used if omitted. + + call-graph.print-type:: + The print-types can be graph (graph absolute), fractal (graph relative), + flat and folded. This option controls a way to show overhead for each callchain + entry. Suppose a following example. + + Overhead Symbols + ........ ....... + 40.00% foo + | + ---foo + | + |--50.00%--bar + | main + | + --50.00%--baz + main + + This output is a 'fractal' format. The 'foo' came from 'bar' and 'baz' exactly + half and half so 'fractal' shows 50.00% for each + (meaning that it assumes 100% total overhead of 'foo'). + + The 'graph' uses absolute overhead value of 'foo' as total so each of + 'bar' and 'baz' callchain will have 20.00% of overhead. + If 'flat' is used, single column and linear exposure of call chains. + 'folded' mean call chains are displayed in a line, separated by semicolons. + + call-graph.order:: + This option controls print order of callchains. The default is + 'callee' which means callee is printed at top and then followed by its + caller and so on. The 'caller' prints it in reverse order. + + If this option is not set and report.children or top.children is + set to true (or the equivalent command line option is given), + the default value of this option is changed to 'caller' for the + execution of 'perf report' or 'perf top'. Other commands will + still default to 'callee'. + + call-graph.sort-key:: + The callchains are merged if they contain same information. + The sort-key option determines a way to compare the callchains. + A value of 'sort-key' can be 'function' or 'address'. + The default is 'function'. + + call-graph.threshold:: + When there're many callchains it'd print tons of lines. So perf omits + small callchains under a certain overhead (threshold) and this option + control the threshold. Default is 0.5 (%). The overhead is calculated + by value depends on call-graph.print-type. + + call-graph.print-limit:: + This is a maximum number of lines of callchain printed for a single + histogram entry. Default is 0 which means no limitation. + +report.*:: + report.percent-limit:: + This one is mostly the same as call-graph.threshold but works for + histogram entries. Entries having an overhead lower than this + percentage will not be printed. Default is '0'. If percent-limit + is '10', only entries which have more than 10% of overhead will be + printed. + + report.queue-size:: + This option sets up the maximum allocation size of the internal + event queue for ordering events. Default is 0, meaning no limit. + + report.children:: + 'Children' means functions called from another function. + If this option is true, 'perf report' cumulates callchains of children + and show (accumulated) total overhead as well as 'Self' overhead. + Please refer to the 'perf report' manual. The default is 'true'. + + report.group:: + This option is to show event group information together. + Example output with this turned on, notice that there is one column + per event in the group, ref-cycles and cycles: + + # group: {ref-cycles,cycles} + # ======== + # + # Samples: 7K of event 'anon group { ref-cycles, cycles }' + # Event count (approx.): 6876107743 + # + # Overhead Command Shared Object Symbol + # ................ ....... ................. ................... + # + 99.84% 99.76% noploop noploop [.] main + 0.07% 0.00% noploop ld-2.15.so [.] strcmp + 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del + +top.*:: + top.children:: + Same as 'report.children'. So if it is enabled, the output of 'top' + command will have 'Children' overhead column as well as 'Self' overhead + column by default. + The default is 'true'. + +man.*:: + man.viewer:: + This option can assign a tool to view manual pages when 'help' + subcommand was invoked. Supported tools are 'man', 'woman' + (with emacs client) and 'konqueror'. Default is 'man'. + + New man viewer tool can be also added using 'man.<tool>.cmd' + or use different path using 'man.<tool>.path' config option. + +pager.*:: + pager.<subcommand>:: + When the subcommand is run on stdio, determine whether it uses + pager or not based on this value. Default is 'unspecified'. + +kmem.*:: + kmem.default:: + This option decides which allocator is to be analyzed if neither + '--slab' nor '--page' option is used. Default is 'slab'. + +record.*:: + record.build-id:: + This option can be 'cache', 'no-cache' or 'skip'. + 'cache' is to post-process data and save/update the binaries into + the build-id cache (in ~/.debug). This is the default. + But if this option is 'no-cache', it will not update the build-id cache. + 'skip' skips post-processing and does not update the cache. + SEE ALSO -------- linkperf:perf[1] diff --git a/tools/perf/Documentation/perf-inject.txt b/tools/perf/Documentation/perf-inject.txt index 0b1cedeef895..87b2588d1cbd 100644 --- a/tools/perf/Documentation/perf-inject.txt +++ b/tools/perf/Documentation/perf-inject.txt @@ -53,6 +53,13 @@ include::itrace.txt[] --strip:: Use with --itrace to strip out non-synthesized events. +-j:: +--jit:: + Process jitdump files by injecting the mmap records corresponding to jitted + functions. This option also generates the ELF images for each jitted function + found in the jitdumps files captured in the input perf.data file. Use this option + if you are monitoring environment using JIT runtimes, such as Java, DART or V8. + SEE ALSO -------- linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-archive[1] diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt index fbceb631387c..19aa17532a16 100644 --- a/tools/perf/Documentation/perf-record.txt +++ b/tools/perf/Documentation/perf-record.txt @@ -341,6 +341,12 @@ Specify vmlinux path which has debuginfo. --buildid-all:: Record build-id of all DSOs regardless whether it's actually hit or not. +--all-kernel:: +Configure all used events to run in kernel space. + +--all-user:: +Configure all used events to run in user space. + SEE ALSO -------- linkperf:perf-stat[1], linkperf:perf-list[1] diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt index 8a301f6afb37..12113992ac9d 100644 --- a/tools/perf/Documentation/perf-report.txt +++ b/tools/perf/Documentation/perf-report.txt @@ -117,6 +117,22 @@ OPTIONS And default sort keys are changed to comm, dso_from, symbol_from, dso_to and symbol_to, see '--branch-stack'. + If the --mem-mode option is used, the following sort keys are also available + (incompatible with --branch-stack): + symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline. + + - symbol_daddr: name of data symbol being executed on at the time of sample + - dso_daddr: name of library or module containing the data being executed + on at the time of the sample + - locked: whether the bus was locked at the time of the sample + - tlb: type of tlb access for the data at the time of the sample + - mem: type of memory access for the data at the time of the sample + - snoop: type of snoop (if any) for the data at the time of the sample + - dcacheline: the cacheline the data address is on at the time of the sample + + And the default sort keys are changed to local_weight, mem, sym, dso, + symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'. + If the data file has tracepoint event(s), following (dynamic) sort keys are also available: trace, trace_fields, [<event>.]<field>[/raw] @@ -151,22 +167,6 @@ OPTIONS By default, every sort keys not specified in -F will be appended automatically. - If --mem-mode option is used, following sort keys are also available - (incompatible with --branch-stack): - symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline. - - - symbol_daddr: name of data symbol being executed on at the time of sample - - dso_daddr: name of library or module containing the data being executed - on at the time of sample - - locked: whether the bus was locked at the time of sample - - tlb: type of tlb access for the data at the time of sample - - mem: type of memory access for the data at the time of sample - - snoop: type of snoop (if any) for the data at the time of sample - - dcacheline: the cacheline the data address is on at the time of sample - - And default sort keys are changed to local_weight, mem, sym, dso, - symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'. - -p:: --parent=<regex>:: A regex filter to identify parent. The parent is a caller of this @@ -351,7 +351,10 @@ OPTIONS --percent-limit:: Do not show entries which have an overhead under that percent. - (Default: 0). + (Default: 0). Note that this option also sets the percent limit (threshold) + of callchains. However the default value of callchain threshold is + different than the default value of hist entries. Please see the + --call-graph option for details. --percentage:: Determine how to display the overhead percentage of filtered entries. @@ -398,6 +401,9 @@ include::itrace.txt[] --raw-trace:: When displaying traceevent output, do not use print fmt or plugins. +--hierarchy:: + Enable hierarchical output. + include::callchain-overhead-calculation.txt[] SEE ALSO diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 52ef7a9d50aa..04f23b404bbc 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -69,6 +69,14 @@ report:: --scale:: scale/normalize counter values +-d:: +--detailed:: + print more detailed statistics, can be specified up to 3 times + + -d: detailed events, L1 and LLC data cache + -d -d: more detailed events, dTLB and iTLB events + -d -d -d: very detailed events, adding prefetch events + -r:: --repeat=<n>:: repeat command and print average + stddev (max: 100). 0 means forever. @@ -139,6 +147,10 @@ Print count deltas every N milliseconds (minimum: 10ms) The overhead percentage could be high in some cases, for instance with small, sub 100ms intervals. Use with caution. example: 'perf stat -I 1000 -e cycles -a sleep 5' +--metric-only:: +Only print computed metrics. Print them in a single line. +Don't show any raw values. Not supported with --per-thread. + --per-socket:: Aggregate counts per processor socket for system-wide mode measurements. This is a useful mode to detect imbalance between sockets. To enable this mode, @@ -211,6 +223,29 @@ $ perf stat -- make -j Wall-clock time elapsed: 719.554352 msecs +CSV FORMAT +---------- + +With -x, perf stat is able to output a not-quite-CSV format output +Commas in the output are not put into "". To make it easy to parse +it is recommended to use a different character like -x \; + +The fields are in this order: + + - optional usec time stamp in fractions of second (with -I xxx) + - optional CPU, core, or socket identifier + - optional number of logical CPUs aggregated + - counter value + - unit of the counter value or empty + - event name + - run time of counter + - percentage of measurement time the counter was running + - optional variance if multiple values are collected with -r + - optional metric value + - optional unit of metric + +Additional metrics may be printed with all earlier fields being empty. + SEE ALSO -------- linkperf:perf-top[1], linkperf:perf-list[1] diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt index b0e60e17db38..19f046f027cd 100644 --- a/tools/perf/Documentation/perf-top.txt +++ b/tools/perf/Documentation/perf-top.txt @@ -233,6 +233,9 @@ Default is to monitor all CPUS. --raw-trace:: When displaying traceevent output, do not use print fmt or plugins. +--hierarchy:: + Enable hierarchy output. + INTERACTIVE PROMPTING KEYS -------------------------- diff --git a/tools/perf/Documentation/perfconfig.example b/tools/perf/Documentation/perfconfig.example index 767ea2436e1c..1d8d5bc4cd2d 100644 --- a/tools/perf/Documentation/perfconfig.example +++ b/tools/perf/Documentation/perfconfig.example @@ -5,7 +5,7 @@ medium = green, lightgray normal = black, lightgray selected = lightgray, magenta - code = blue, lightgray + jump_arrows = blue, lightgray addr = magenta, lightgray [tui] diff --git a/tools/perf/Documentation/tips.txt b/tools/perf/Documentation/tips.txt index e0ce9573b79b..5950b5a24efd 100644 --- a/tools/perf/Documentation/tips.txt +++ b/tools/perf/Documentation/tips.txt @@ -27,3 +27,4 @@ Skip collecing build-id when recording: perf record -B To change sampling frequency to 100 Hz: perf record -F 100 See assembly instructions with percentage: perf annotate <symbol> If you prefer Intel style assembly, try: perf annotate -M intel +For hierarchical output, try: perf report --hierarchy |