diff options
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/pci/maestro3.c | 22 |
1 files changed, 18 insertions, 4 deletions
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index b56e33676780..53d2a5d61baf 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -1598,6 +1598,10 @@ static void snd_m3_update_ptr(struct snd_m3 *chip, struct m3_dma *s) } } +/* The m3's hardware volume works by incrementing / decrementing 2 counters + (without wrap around) in response to volume button presses and then + generating an interrupt. The pair of counters is stored in bits 1-3 and 5-7 + of a byte wide register. The meaning of bits 0 and 4 is unknown. */ static void snd_m3_update_hw_volume(unsigned long private_data) { struct snd_m3 *chip = (struct snd_m3 *) private_data; @@ -1609,7 +1613,15 @@ static void snd_m3_update_hw_volume(unsigned long private_data) values. */ x = inb(chip->iobase + SHADOW_MIX_REG_VOICE) & 0xee; - /* Reset the volume control registers. */ + /* Reset the volume counters to 4. Tests on the allegro integrated + into a Compaq N600C laptop, have revealed that: + 1) Writing any value will result in the 2 counters being reset to + 4 so writing 0x88 is not strictly necessary + 2) Writing to any of the 4 involved registers will reset all 4 + of them (and reading them always returns the same value for all + of them) + It could be that a maestro deviates from this, so leave the code + as is. */ outb(0x88, chip->iobase + SHADOW_MIX_REG_VOICE); outb(0x88, chip->iobase + HW_VOL_COUNTER_VOICE); outb(0x88, chip->iobase + SHADOW_MIX_REG_MASTER); @@ -1629,7 +1641,9 @@ static void snd_m3_update_hw_volume(unsigned long private_data) val = chip->ac97->regs[AC97_MASTER_VOL]; switch (x) { case 0x88: - /* mute */ + /* The counters have not changed, yet we've received a HV + interrupt. According to tests run by various people this + happens when pressing the mute button. */ val ^= 0x8000; chip->ac97->regs[AC97_MASTER_VOL] = val; outw(val, chip->iobase + CODEC_DATA); @@ -1638,7 +1652,7 @@ static void snd_m3_update_hw_volume(unsigned long private_data) &chip->master_switch->id); break; case 0xaa: - /* volume up */ + /* counters increased by 1 -> volume up */ if ((val & 0x7f) > 0) val--; if ((val & 0x7f00) > 0) @@ -1650,7 +1664,7 @@ static void snd_m3_update_hw_volume(unsigned long private_data) &chip->master_volume->id); break; case 0x66: - /* volume down */ + /* counters decreased by 1 -> volume down */ if ((val & 0x7f) < 0x1f) val++; if ((val & 0x7f00) < 0x1f00) |